Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX
|
|
|
- Arron Nash
- 5 years ago
- Views:
Transcription
1 Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX ref.no.: 91A040 EAN: Transport and storage box MAFELL-MAX Technical data Collar diameter 43 mm Chuck capacity 13 mm Max. drilling diameter in wood / steel 50 / 13 mm Torque soft / hard 44 / 90 Nm Impulse torque (soft) 49 Nm 1st speed range /min 2nd speed range /min Weight (including battery 1,7 kg Nominal voltage 18 V Torque settings 11 Delivery specification 1 Quick-release chuck A-SBF 13; Ref. No Quick-release bit holder A-SBH; Ref. No Battery-PowerStation APS 18 M; Ref. No Belt clip 1 Auxiliary handle 1 Bit PZ 2 Angle head A-WV 18; Ref. No Battery PowerTanks 18 M 94; Ref. No /6
2 Examples for usage Swap the bit holder, chuck and angle head in a matter of seconds it s easy with the clever quick-release system. Pull out, insert, ready to go. Drilling in wood with a 50 mm Lewis auger bit? Not a problem for the A 18 M bl and ASB 18 M bl with auxiliary handle. The battery permanently displays its exact charge, even when it is detached. 2/6
3 Applications Drilling Driving Ideal for construction sites Advantages The convenient function switch on the top of the cordless drill driver selects the drilling, driving and impulse modes. Spindle with 1/4 chuck directly accommodates bits and push-fit accessories. 43 mm diameter clamping collar fits all MAFELL BST drilling stations. Bright LEDs illuminate a large working area. With two bit holders on each side of the machine, the desired bit is always to hand. The maintenance-free brushless motor ensures a long service life and, thanks to its high efficiency, makes best possible use of the battery capacity. Description Powerful, user-friendly, tough, resilient MAFELL s new, high-output cordless drill drivers enhance the pleasure of doing a good job. The large torque range gives access to extremely high twisting forces. Screws can be tightened carefully in a wide range of applications with the appropriate torque selected, even large screws can be used. Tool-free quick-release system for speed and efficiency when alternating between drilling and driving. The selectable impulse mode comes to the fore when confronted with immovable screws. Thanks to the practical belt clip, the cordless drill driver is always within reach. It can be attached to the left or right of the machine without any tools. The battery PowerTanks feature process-controlled technology. All the relevant factors, including the individual cell state, air cooling and cell temperature are monitored. In addition, the floating battery cells are protected against mechanical influences. 3/6
4 Accessories / Tools Quick-release chuck A-SBF 13 Quick-release bit holder A-SBH 13 mm (1/2 Angle head A-WV 18 Torque head A-DMV x3 up to 100 Nm 3:1 ratio Battery PowerTanks 18 M 72 Battery PowerTanks 18 M V, 72 Wh 18 V, 94 Wh Battery-PowerStation APS 18 M Ø 10 mm (3/8, total length 650 mm (25 9/16 18 V Ø 12 mm (1/2, total length 650 mm (25 9/16 Ø 14 mm (9/16, total length 650 mm (25 9/16 Ø 16 mm (5/8, total length 650 mm (25 9/16 Ø 18 mm (11/16, total length 650 mm (25 9/16 Ø 20 mm (13/16, total length 650 mm (25 9/16 Ø 22 mm (7/8, total length 650 mm (25 9/16 Ø 24 mm (15/16, total length 650 mm (25 9/16 Ø 26 mm (1, total length 650 mm (25 9/16 Ø 28 mm (1 1/8, total length 650 mm (25 9/16 Ø 30 mm (1 3/16, total length 650 mm (25 9/16 Ø 8 mm (5/16, total length 460 mm 18 1/8 Ø 10 mm (3/8, total length 460 mm (18 1/8 Ø 12 mm (1/2, total length 460 mm (18 1/8 Ø 14 mm (9/16, total length 460 mm (18 1/8 Ø 16 mm (5/8, total length 460 mm (18 1/8 Ø 18 mm (11/16, total length 460 mm (18 1/8 Ø 20 mm (13/16, total length 460 mm (18 1/8 Ø 22 mm (7/8, total length 460 mm (18 1/8 Ø 24 mm (15/16, total length 460 mm (18 1/8 Ø 26 mm (1, total length 460 mm (18 1/8 Ø 28 mm (1 1/8, total length 460 mm (18 1/8 Ø 30 mm (1 3/16, total length 460 mm (18 1/8 4/6
5 Ø 6 mm (1/4, total length 320 mm (18 1/8 Ø 7 mm (1/4, total length 320 mm (18 1/8 Ø 8 mm (5/16, total length 320 mm (18 1/8 Ø 9 mm (3/8, total length 320 mm (18 1/8 Ø 10 mm (3/8, total length 320 mm (18 1/8 Ø 12 mm (1/2, total length 320 mm (18 1/8 Ø 14 mm (9/16, total length 320 mm (18 1/8 Ø 16 mm (5/8, total length 320 mm (18 1/8 Ø 18 mm (11/16, total length 320 mm (18 1/8 Ø 20 mm (13/16, total length 320 mm (18 1/8 Special auger Ø 22 mm (7/8, total length 320 mm (18 1/8 Ø 24 mm (15/16, total length 320 mm (18 1/8 Ø 26 mm (1, total length 320 mm (18 1/8 Ø 28 mm (1 1/8, total length 320 mm (18 1/8 Case with auger bits 650 Ø 30 mm (1 3/16, total length 320 mm (18 1/8 5 pieces auger bits Ø 12, 14, 16, 18, 20 mm Case with auger bits 460 Case with auger bits pieces auger bits Ø 8, 10, 12, 14, 16, 18 mm 6 pieces auger bits Ø 8, 10, 12, 14, 16, 18 mm Drilling station BST 460 Drilling station BST 460 with Parallel Drilling station BST 320 Drilling station BST 320 S with Parallel Drilling station BST 650 S with Parallel Drilling station BST 460 S with Parallel Drilling station BST 650 S / BST 460 S Drilling station BST 650 S / BST 460 S 5/6
6 contact MAFELL AG Beffendorfer Straße 4 D Oberndorf / Neckar Germany Tel.: / Fax: export@mafell.de 6/6
INTERIOR. On-site performance. The new universal FEIN cordless MultiTalent & MultiMaster for interior work and renovation. NEW.
INTERIOR On-site performance. The new universal FEIN cordless MultiTalent & MultiMaster for interior work and renovation. NEW 12 V and 18 V Proven technology, increased power: the FEIN cordless MultiMaster.
NEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
MINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and Process Control Straight Spindle Form - Torque range
MInIMAT-ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
Product information PI 54 en Machining unit xxx Slide unit xxx
Product information PI 54 en Machining unit 0.5.030.xxx Slide unit 0.2.200.xxx 2016-03-01 Table of Contents Table of Contents Machining Unit Brief Description...4 Technical Data...6 Dimensions...7 Precision...8
MINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum flexibility and processing reliability Straight design torque ranges
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com
MInIMAT-Ec. flexible data recording highly accurate
Screwdriving technology Automation Air motors Air tools Handheld Screwdriver electric MInIMAT-Ec straight handle design - torque ranges between 0.03-18 nm pistol-grip design - torque ranges between 0.06-18
MINIMAT-EC-Servo Screwdriver handheld
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC-Servo Screwdriver handheld straight handle design - torque ranges between 0.01-2.0 Nm The flexible EC-Servo screwdriver for low torque
ISOMETER isoev425/isoev425hc with coupling device AGH420
with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles isoev425_d00126_04_d_xxen/06.2018 with coupling device AGH420 Insulation monitoring
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK4A- Damper actuator with capacitor technology for adjusting air dampers with emergency control function and extended functionalities in ventilation and airconditioning systems for
Installation VAV-Compact Retrofit Set
VAV-Compact Retrofit Set NMV-D3-RE-SET VAV-Compact Retrofit Set for utilisation of existing VAV devices made by various manufacturers. for various air velocities Suitable for round VAV boxes only. General
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
Technical data sheet NKQ24A- SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories Air damper
minimat-ec Cordless screwdriver
Screwdriving technology Automation Air motors Air tools handheld screwdriver electric minimat-ec Cordless screwdriver the solution to cable management angle head design - for assembly in confined spaces
Units Available Up To 7/8 Tap Capacity. 30 Day Free Trial
Units Available Up To 7/8 Tap Capacity 30 Day Free Trial FlexArm Models A-32 0-80 to 9/16 Tap Capacity 11 to 34 Working Range 6 Motor Options Size 1 Quick Change Chuck S-36 and M-60 0-80 to 3/4" Tap Capacity
ABB i-bus KNX HCC/S Heating/cooling circuit controller
ABB i-bus KNX HCC/S 2.2.1.1 Heating/cooling circuit controller Description of product The device is a modular DIN rail component (MDRC) in pro M design. It is intended for installation in distribution
SHIMPO INSTRUMENTS. FG-7000T Digital Torque Gauge Operation Manual
FG-7000T Digital Torque Gauge Operation Manual SHIMPO INSTRUMENTS Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the
Technical data sheets
echnical data sheets Ready-to-connect spring return actuator with emergency function for VAV and CAV units in ventilation and air conditioning systems in buildings For air dampers up to approx. 4 m 2 orque
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK24A-SR Modulating SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for building
MINIMAT-EC. Handheld Screwdriver electric
Screwdriving Technology Automation Air Motors Air Tools MINIMAT-EC straight handle design - torque ranges between 0.01-25 N m pistol-grip design - torque ranges between 0.06-18 N m angle head design -
Cutting devices, longitudinal 5
Cutting devices, longitudinal 5 SM-120 Multisystem Belt/tape width max. mm 120 inch 4.7 Cutting width per operation mm 120 inch 4.7 Belt/tape thickness max. mm 5 inch 0.2 Electric power supply V 3 230/400
Revision to the Operating Instructions
Drive Technology \ Drive Automation \ System Integration \ Services *22897666_0716* Revision to the Operating Instructions Drive Power Solution MOVI DPS Storage Unit Edition 07/2016 22897666/EN SEW-EURODRIVE
LINETRAXX RCMS150. Residual current monitor type B with integrated measuring current transformers for earthed AC/DC systems (TN and TT systems)
LINETRAXX RCMS150 Residual current monitor type B with integrated measuring current transformers for earthed AC/DC systems (TN and TT systems) RCMS150_D00259_00_D_XXEN/09.2016 LINETRAXX RCMS150 Residual
REVOLUTIONARY TAPPING ARM MACHINE S.
REVOLUTIONARY TAPPING ARM MACHINE S www.roscamat.com Electric SERIES: Mosquito, Tiger & Shark M16 (aluminium) M14 9/16 Model R MOSQUITO Single Phase 220 VOLT Available in 110 V Reach 765 mm. - 30 Height
RACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8
SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral
MSR 2400W. Multi purpose Power System for Telecom and Industrial Applications. Nominal Output Voltage. Voltage Setting Range
MSR 2400W Multi purpose Power System for Telecom and Industrial Applications 2400 W modular system All voltages available 0 144VDC per module U and I adjustable from 0 to max value Hot-swap plug-in modules
M12 Tool Holster
Industry s Number One Sub-Compact System Need tool belt portability in your cordless tools, without sacrificing power and speed? Check out the expanded M12 LITHIUM-ION cordless system from Milwaukee the
CORDLESS TOOL SYSTEMS for PRECISION FASTENING
CORDLESS TOOL SYSTEMS for PRECISION FASTENING Cordless Pistol Grip Tools Benefits: B12PB Pistol Inline Style» Ergonomic and durable design» Compact and lightweight» Low spare part costs with common gearing
NEW CAPTIS-M COLLET CHUCK. The manually operated collet chuck for rotating and stationary use
NEW CAPTIS-M COLLET CHUCK The manually operated collet chuck for rotating and stationary use CAPTIS-M COLLET CHUCK The modularly designed CAPTIS clamping system gets a new family member: the CAPTIS-M collet
Cables. U.S. Registered Trademark EN0B-0341GE51 R0402 Copyright 2002 Honeywell Inc. All rights reserved
N20010/N34010 NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL PRODUCT DATA GENERAL These direct-coupled damper actuators provide modulating control for: air dampers, VAV
Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer
USER'S MANUAL Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer DEIF A/S Frisenborgvej 33 DK-7800 Skive
Electromotoric actuators Torques up to 60 Nm Running times ¹) s. ¹) Predefined by the basic unit (LMV5...)
7 818 Actuators SQM9... Electromotoric actuators Torques up to 60 Nm Running times ¹) 30...120 s ¹) Predefined by the basic unit (LMV5...) The SQM9... and this Data Sheet are intended for use by OEMs which
VLT Line Filter MCC 107 EMC Filter Series VLT Midi Drive FC 280 (K1 K3)
These instructions provide technical and installation information for the MCC 107 EMC filter series. Only Danfoss qualified personnel is allowed to install this equipment. The personnel must be familiar
A U T O C O L L I M A T O R S
Printed in Germany 229 900 E 04/07 E l e c t r o n i c α A U T O C O L L I M A T O R S Measure With Precision MÖLLER-WEDEL OPTICAL GmbH Rosengarten 10 D-22880 Wedel Tel : +49-41 03-9 37 76 10 Fax: +49-41
Dia Lens Finishing Products & Accessories. The best solutions for your finishing laboratory. solutions
Dia Lens Finishing Products & Accessories The best solutions for your finishing laboratory solutions For simple and precise rimless drill mounts DigiDrillDM-50 Rimless Lens Drill The best solution for
ISOMETER isoev425 with coupling device AGH420
with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles Preliminary datasheet isoev425_d00126_02_d_xxde/09.2015 with coupling device
Two-stage lifting column - RKSlimlift/EM
Two-stage lifting column - RKSlimlift/EM Rod-shaped design and extremely quiet operation RKSlimlift RKSlimlift EM 4 fixing threads 9Simple 9 connection Drive above the internal profile 9Large 9 assembly
Clean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging
eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when
Silent Gliss. Roman Blind Systems
Roman Blind Systems 2 Battery Operated Roman Blind System Product Information Battery operated, radio controlled Roman blind system for contract and residential applications. Motor contained within headbox.
Technical data sheet. Technical data
echnical data sheet LMQ4A Damper actuator for adjusting air control dampers in ventilation and air-conditioning systems for building services installations For air dampers up to approx 8 m orque 4 Nm Nominal
IQ V20 Series Cordless Tools. Cordless convenience. Uncompromising power.
IQ V20 Series Cordless Tools Cordless convenience. Uncompromising power. Uncompromising Cordless Power. All cordless tools offer easy-working freedom from electrical cords and air hoses but most can t
PLATINUM PRO6000 PROFESSIONAL SERIES DIGITAL COUNTERTOP / PORTABLE BALANCE
PLATINUM PRO6000 PROFESSIONAL SERIES DIGITAL COUNTERTOP / PORTABLE BALANCE ongratulations on your purchase of the CProfessional Series model Platinum PRO6000 precision countertop/portable balance by GemOro
Functional data Factory settings Variable Setting Torque Inhibiting torque
echnical data sheet GK4A-MF Parameterisable SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for
N20010, N NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL SPECIFICATIONS GENERAL FEATURES PRODUCT DATA
N21, N341 NON-SPRING RETURN DAMPER ACTUATOR 2/34 Nm (177/3 lb-in) FOR MODULATING CONTROL SPECIFICATIONS Supply voltage Nominal voltage PRODUCT DATA 24 Vac 2%, 5/6 Hz; 24 Vdc -1...+2% 24 Vac, 5/6 Hz; 24
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
CORDLESS SYSTEMS. Hilti. Outperform. Outlast.
CORDLESS SYSTEMS. Hilti. Outperform. Outlast. Cordless Systems with Ll-Ion SFC 14-A Page 067 Accessories and Consumables Page 068 SFH 22-A Page 069 SID 14-A Page 070 Accessories Page 071 SIW 14-A Page
Two-stage lifting column - RKSlimlift /EM
Two-stage lifting column - RKSlimlift /EM Rod-shaped design and extremely quiet operation RKSlimlift RKSlimlift EM 4 fixing threads Simple connection Drive above the internal profile Large assembly surface
Cordless Tools Battery-Powered Cordless Tools for Precision Fastening
Cordless Tools Battery-Powered Cordless Tools for Precision Fastening Cordless Pistol Tools Inline Style B12PB & Push-to-Start B12PP Battery Pack and Charger included with tool Push-to-Start Inline Style
ORYON RING LIGHTS. 14 in. Ring Light and 18 in. Ring Light. Quick Start Guide. What s Included
ORYON RING LIGHTS Quick Start Guide 14 in. Ring Light and 18 in. Ring Light What s Included 1 x RLB40 or RLB48 1 x Power Cable 1 x Phone Mount 1 x 15mm Rail adaptor 1 x Dual Battery Charger 2 X Sony L
SMART FORCE AND TORQUE SENSORS. User s Guide
SMART FORCE AND TORQUE SENSORS Thank you Thank you for purchasing a Mark-10 Plug & Test TM remote sensor, designed for use with a Mark-10 model 5i or 3i force/torque indicator. With proper usage, we are
Digital Overhead Stirrer
A Geno Technology, Inc. (USA) brand name Digital Overhead Stirrer Cat. No. BT1021 1-800-628-7730 1-314-991-6034 info@btlabsystems.com Thanks for choosing BT1021 Digital Overhead Stirrer. This operation
Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc.
Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc. Technical Information Version 11.10 Features Nominal torque 5 Nm Self-locking system for wear-free holding torque On-board controls
ABB i-bus KNX BCI/S Boiler/Chiller Interface
ABB i-bus KNX BCI/S 1.1.1 Boiler/Chiller Interface Description of product The boiler/chiller interface is a modular DIN rail component that acts as an interface to the heating/cooling system generator.
MODEL : LK-P21B MOBILE PRINTER
SEWOO TECH CO.,LTD. 374-2, Gajang-dong, Osan-si, Gyeonggi-do, 447-210, Korea TEL : +82-31-459-8200 FAX : +82-31-459-8880 www.miniprinter.com MODEL : LK-P21B MOBILE PRINTER P21B Rev. C 11/14 All specifications
ODU MAC LC. Modular Attachable Connector System
Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61
Operation Manual Locator Wöhler L 200
Operation Manual Locator Wöhler L 200 Best.-Nr. 22849 2014-12-18. Contents Contents 1 General Information... 3 1.1 Operation Manual Information... 3 1.2 Notes in this manual... 3 1.3 Proper use... 3 1.4
ABB i-bus KNX Weather Unit, 1-fold, MDRC WZ/S , 2CDG110184R0011
Technical Data 2CDC504091D0201 ABB i-bus KNX Product description The Weather Unit WZ/S 1.3.1.2 is used - primarily in residential applications - to record weather data. The Weather Sensor WES/A 3.1 is
ZEISS Compact Prime CP.3 and CP.3 XD Mount Change Instructions
ZEISS Compact Prime CP.3 and CP.3 XD Mount Change Instructions Table of Contents Introduction 3 Explanation of Symbols 3 Overview 4 Delivery Contents of a ZEISS CP.3 and CP.3 XD 4 Technical Data 5 Changing
NEW NEW PRODUCT PRODUCT 188, 59,50
Art. 1052 Aluminium type universal tool case 1/4" + 3/8", 163-pcs. - Wide range of tools with cordless bit screwdriver - Combination wrench 8-19 mm - Cordless bit screwdriver 7.2 V / 1300 mah - Hexagonal
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NKA-DKC L Modulating SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories
V INLINE WELDING INLINE WELDING
SATF-40ND ø0,25'' - ø1,5'' ø6 - ø40 Technical Specifications - Water-cooled head - Dual-wing opening - Clamping jaws - stainless steel (1 kit per diameter) - Tungsten electrode specific to diameter - Motor
- 1 - General ordering data Order No
General ordering data Order No. 1730710000 Part designation BL 5.00/3 SN SW Version EAN 4008190387327 Qty. 100 pc(s). System parameters Conductor connection system Leaf spring connection Outgoing direction
PIPE & WALL INSPECTION SYSTEMS ASSEMBLY AND OPERATING INSTRUCTION
PIPE & WALL INSPECTION SYSTEMS ASSEMBLY AND OPERATING INSTRUCTION ---------------------------------------------------------------------------------------------------------- Read these instructions completely
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
SUSS MICROTEC MJB4 MASK ALIGNER DOCUMENTATION
SUSS MICROTEC MJB4 MASK ALIGNER DOCUMENTATION ANITHA & KARTHICK 1 Tool specification: Substrate size :1 up to 4 Mask size : Standard 2 x2 up to 5 x5 Alignment :X,Y-±5mm,theta-5⁰ Alignment Accuracy :Top
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
SRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
Operating Instruction
Level and Pressure Operating Instruction VEGASWING 71 A Contents Contents Safety information... 2 1 Product description 1.1 Function and configuration... 3 1.2 Functional principle... 3 1.3 Technical data...
FAG PowerTherm HEATER HEATER.PLATE. Bench top devices for heating rotationally symmetric parts. A Member of the Schaeffler Group
FAG PowerTherm.PLATE Bench top devices for heating rotationally symmetric parts A Member of the Schaeffler Group FAG PowerTherm Correct mounting helps prevent damage over time Heating? Many rolling bearings
BEVEL GEAR WINCH RATIO 3:1
BEVEL GEAR WINCH RATIO 3:1 32 A 34 57 48 45 B 89 82,5 45 54 17 6,5 C Bevel gear in Zamak. Conic mechanism in Zamak. Steel spring brake. Efficiency: 0,60 Floating on ball in Nylon. Right and left rotation.
DC Connector. Data sheet LINAK.COM/HOMELINE
DC Connector Data sheet LINAK.COM/HOMELINE DC Connector The DC CONNECTOR is a HOMELINE accessory making it possible to connect a variety of standard articles equipped with a DC plug to your TWINDRIVE TD3
CLIPLINE complete. The modular terminal block system for all applications
CLIPLINE complete The modular terminal block system for all applications CLIPLINE complete All connection technologies, one system With CLIPLINE complete, the unique modular terminal block system from
Chameleon Stand-alone
Quick Installation Guide Installation and Commissioning Chameleon Stand-alone Power Supply Module, 48 VDC, 650W, HE, IP65 Low Power Outdoor Applications 356849.03 Introduction Warnings..., page 3 Tools
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
TEL: / FAX:
Self-leveling Rotary Laser FRE-211 Operating Manual P.R.Engineering Ltd UK www.laser-level.co.uk TEL: 01246 269 777 / FAX: 01246 260 007 SAFETY PRECAUTIONS: During instrument operation, be careful not
NF44E-.. / NFZ44E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC1010D0201 28/03/11 NFE-.. / NFZE-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
Side block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NVK4A-SR-PC Modulating globe valve actuator for -way and 3-way globe valves Actuating force 000 N Nominal voltage AC/DC 4 V Control: modulating DC (0) V...0 V Nominal stroke 0 mm Design
ZB5AH1 white projecting pushbutton head Ø22 push-push unmarked
Characteristics white projecting pushbutton head Ø22 push-push unmarked Main Range of product Product or component type Device short name Bezel material Mounting diameter Head type Sale per indivisible
ABB i-bus KNX Switch Actuator, Current Detection, x-fold, 16/20 A, C-Load, MDRC SA/S x , 2CDG1101xxR0011
Technical Data 2CDC505082D0203 ABB i-bus KNX Product description Switch Actuators SA/S x.16.6.1, 16/20 A are modular installation devices in ProM design for installation in the distribution board. They
Product Information. POSITIP PT 8016 Digital Readout for Manually Operated Machine Tools
Product Information POSITIP PT 816 Digital Readout for Manually Operated Machine Tools 11/218 POSITIP PT 816, PT 816 Active The convenient digital readout for milling, drilling, and boring machines, and
Installation manual plugs and connectors with screw connection (16/32 A)
EN Installation manual plugs and connectors with screw connection (16/32 60003213 Issue 04.2016 2016-04-01 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3
JULIET-PK. Joystick station
Joystick station JULIET-PK Handy and compact joystick station. Juliet PK is a user-friendly, ergonomic product, whose size and shape are the result of careful analysis of the aspects linked to daily use
User Manual. Binocular Zoom Stereo Microscope with Boom Stand. MicroscopeNet.com
User Manual Binocular Stereo Microscope with Boom Stand Model W42C1 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation...3
GF Machining Solutions. Mikron HPM 1150U HPM 1350U
Mikron HPM 115U HPM 135U Swiss design and quality 2 Mikron HPM 115U / 135U Contents Applications 4 Highlights 6 Accessibility 8 The basic machine 1 A hightech spindle 11 Tool magazine 14 Ergonomics 15
Operating Instructions for FC Adjustable Fiber Optic Adapter
530 Main Street, Acton, MA 01720 Phone: (978)263-3584, Fax: (978)263-5086 Web Site: www.acton-research.com Operating Instructions for FC-446-020 Adjustable Fiber Optic Adapter Ver 2.0 Model FC-446-020
Sense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
PT 1,5/ 3-5,0-H. Extract from the online catalog. Order No.:
Extract from the online catalog PT 1,5/ 3-5,0-H Order No.: 1935174 The figure shows a 10-position version of the product PC terminal block, Nominal current: 17.5 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
Maximum control over the tightening process
Maximum control over the tightening process Hi-tech DC tightening systems Brushless electric screwdrivers/nutrunners with direct control of the tightening torque/angle: from 0.1 to 5.6 Nm Power supply
PRODUCT ASSORTMENT. for sanitary areas and interior construction. Premium grinding tools since
PRODUCT ASSORTMENT for sanitary areas and interior construction Premium grinding tools since 1919 www.tyrolit.com TYROLIT GROUP 2 TYROLIT Group A global company As one of the world s leading manufacturers
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T Presentation XCR With head for rotary movement operators, spring return to off position (1 contact
Oven Loggermaster BEVS User Manual
Oven Loggermaster BEVS 2301 User Manual Version This manual shall be read carefully before starting. Directions included in this operation manual shall be strictly followed PAGE 1 Catalogue 1. Brief Introduction
RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
QX Series Precision Screwdriver
QX Series Precision Screwdriver QX Series Angle Wrench www.irtools.com/qx 1 Next-Generation Productivity. The innovative QX Series is a revolutionary step for your entire facility, one that shows how a
Roller Rail Systems. (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854) R310EN 2315 ( ) The Drive & Control Company
Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems
INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x , 2TAZ710xx1R2161
Technical Data 9AKK107045A4913 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are
S 551 COMPRESSED AIR ANALYZER
The ideal data logger for energy analyzes (ISO 50001) and air audits (ISO 11011) Features Easy to use Just connect the sensor and start the recording, no configuration and programming required Easy operation
ABB i-bus KNX Switch Actuator, x-fold, 10 A, MDRC SA/S x , 2CDG11015xR0011
Technical Data 2CDC505054D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.6.2.1, 10 A are modular installation devices in ProM design for installation in the distribution board. They are