ENDOSKELETAL. Becker Orthopedic Coupler Creative Adaptations Currier Coupling Creative Components Offset Plates

Transcription

1 ENDOSKELETAL Prosthetic 81 Becker Orthopedic Coupler Creative Adaptations Currier Coupling Creative Components Offset Plates Endolite Kits Ankles, Shin Fairings, AK cover TT Pro, Brio Ankle ESP Haberman Alignment Devices Fillauer Companies DuraShock Pylon, DuraShock Shorty, Sfx Fillauer and Hosmer Components Grace Prosthetics Grace (4-Hole) Plates Medi USA Rotatable Adapter, Clever Bone System Orthocare Innovations Galileo Stepwatch, Smart Pyramid Compas Master Unit, Tube Clamp Adapter Ossur Americas Components Total Shock System Otto Bock Components Torsion Adapter Shamp Bionics Extend-A-Tube TiMed Components Trulife Cup Connector Kit, 4-Hole Mounting Plates Composite Pylon Components WillowWood Magnum System Components Earthwalk2, Impulse Ankle

2 Prosthetic 82 ENDOSKELETAL Becker - Coupler Post-Op Provides a more secure attachment to the socket Lightweight aluminum with Euro four hole design Consists of the basic plate plus contoured stainless steel attachment straps Straps are held in place using perpendicular grooves and the same screws that attach the coupler to the endo system Coupler Plate P Decreases fabrication time Deep undercuts and knurls eliminate the need to vacuum form the plastic under the plate Conical pocket significantly improves the interface with the residual limb model Can be removed and reused P Standard Coupler Conical Block with Foam Incorporates all the features of the Coupler Plate, except it comes with molded urethane on the conical surface This model should only be used in wet laminations In many cases, the need for filler is eliminated Sealing and grinding are rarely necessary P Creative Adaptations, Inc. - Currier Coupling 4-Hole European style socket attachment block using a vacuum formable urethane material Capping the PVA bag is eliminated saving time and money Milled 1 /4 standoffs dictating even laminates Currier Coupling Plus 101CC 4-Hole European style socket attachment block with vacuum formable urethane Designed with a center opening so a 4-Hole clutch lock can be used Milled 1 /4 standoffs dictating even laminates 102CC 101CC 1012CC Creative Components 12 hole offset plate LL312H 18 hole offset plate LL318H *Pins not included SPS x3 Fax:

3 ENDOSKELETAL Prosthetic 83 Endolite - 30 mm BK kit with Multiflex Foot Choose one product from each group to make a kit Kit with Aluminum tube clamp 0286ATC Kit with Full Alignment 0286FA Kit with Titanium tube clamp 0286T Kit with Aluminum pylon 0286AP Group 1 - Proximal Attachment Fittings Full Alignment Kit 30 mm FAKIT30 Tube Clamp Adapter Aluminum 30 mm 1.9 oz Tube Clamp Adapter Titanium 30 mm 2.3 oz AK30M1 Group 2-30 mm BK Pylon Limit 10 Carbon Fiber 2.3 oz 220 lbs Carbon Fiber 6.2 oz 220 lbs Reinforced Carbon Fiber Group 3 - Ankles Always use a standard ankle with a standard snubber Group 5 - Feet 5.4 oz 330 lbs (K1-3)/ 320 lbs (K4) mm standard ankle white (W) with 60 ball (6 oz) mm standard ankle orange (O) with 70 ball (6 oz) mm standard ankle blue (B) with 80 ball (6 oz) Group 4 - Snubbers Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Multiflex Foot Left Right Ladies (Slim Width) Foot Left Right (20 mm heel height) (25 mm heel height) 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / International x3 Fax: estore.spsco.com

4 Prosthetic 84 ENDOSKELETAL 30 mm TT Pro BK Kit with Multiflex Foot Choose one product from each group to make a kit 5686 Group 1 - TT Pro Pylon with Pyramid Alignment See pylon weight chart at bottom of facing page to choose the correct product number TT Pylon soft rod, soft spring TT Pylon medium rod, soft spring TT Pylon medium rod, medium spring TT Pylon firm rod, medium spring TT Pylon firm rod, firm spring TTPROPYR1P TTPROPYR2P TTPROPYR2W TTPROPYR3W TTPROPYR3B Group 2 - Ankles Always use a standard ankle with a standard snubber Group 4 - Multiflex Foot 30 mm standard ankle white (W) with 60 ball mm standard ankle orange (O) with 70 ball mm standard ankle blue (B) with 80 ball Group 3 - Snubbers Always use a standard ankle with a standard snubber and always use a light duty ankle with a light duty snubber Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Multiflex Foot Left Right Ladies Multiflex Foot Left Right (20 mm heel height) (25 mm heel height) 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / SPS x3 Fax:

5 ENDOSKELETAL Prosthetic mm BK Kit with Multiflex Foot Choose one product from each group to make a kit Kit with Aluminum tube clamp 5286ATC Kit with Full Alignment 5286FA Kit with Titanium tube clamp 5286T Group 1 - Proximal Attachment Fittings Full Alignment Kit 35 mm FAKIT35 Tube Clamp Adapter Aluminum 35 mm Tube Clamp Adapter Titanium 35 mm AK35M1 Group 2-35 mm BK Pylon Maximum weight for K1-K3 level is 264 lbs; for K4 level is 220 lbs 10 Carbon Fiber 2.2 oz Carbon Fiber 5.9 oz Group 3 - Ankles Always use a standard ankle with a standard snubber 35 mm standard ankle white (W) with 60 ball mm standard ankle orange (O) with 70 ball mm standard ankle blue (B) with 80 ball Group 4 - Snubbers Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) Group 5 - Multiflex Foot / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Multiflex Foot Left Right Ladies Multiflex Foot Left Right (20 mm heel height) (25 mm heel height) 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / International x3 Fax: estore.spsco.com

6 Prosthetic 86 ENDOSKELETAL 160H 35 mm AK Kit with Multiflex Foot Choose one product from each group to make a kit Group 1 - AK Proximal Attachment 1750ENS a. b. c. a. Full alignment kit (only use with full alignment shin) b. Single bolt male pyramid (only use with full alignment shin) c. Single bolt short female pyramid (only use with full alignment shin) AKP d. Single bolt long female pyramid (only use with full alignment shin) e. 4-bolt short knee alignment (only use with 4-bolt shin) f. 4-bolt pyramid alignment (only use with 4-bolt shin) C d. e. f. g. h. Group 2 - AK Frame with Catech 700R Short CaStance g. Full alignment shin with unit h. 4-bolt alignment shin with unit Group 3 - Ankles Always use a standard ankle with a standard snubber 35 mm standard ankle white (W) with 60 ball mm standard ankle orange (O) with 70 ball mm standard ankle blue (B) with 80 ball Group 4 - Snubbers Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) Group 5 - Multiflex Foot / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Multiflex Foot Left Right Ladies Multiflex Foot Left Right (20 mm heel height) (25 mm heel height) 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / SPS x3 Fax:

7 ENDOSKELETAL Prosthetic mm BK Kit with Dynamic Response 2 Foot Choose one product from each group to make a kit Kit with Aluminum tube clamp Kit with Full Alignment Kit with Titanium tube clamp Kit with Aluminum pylon Group 1 - Proximal Attachment Fittings 0386ATC 0386FA 0386T 0386AP Full Alignment Kit 30 mm Group 2-30 mm BK Pylon Limit 10 Carbon Fiber 2.3 oz 220 lbs Carbon Fiber 6.2 oz 220 lbs Reinforced Carbon Fiber Group 3 - Ankles Always use a standard ankle with a standard snubber Group 5 - Dynamic Response 2 Foot 20 mm heel height 30 mm standard ankle white (W) with 60 ball (6 oz) mm standard ankle orange (O) with 70 ball (6 oz) mm standard ankle blue (B) with 80 ball (6 oz) oz 330 lbs (K1-3)/ 320 lbs (K4) FAKIT30 Tube Clamp Adapter Aluminum 30 mm Tube Clamp Adapter Titanium 30 mm Group 4 - Snubbers AK30M Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Left Right 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / International x3 Fax: estore.spsco.com

8 Prosthetic 88 ENDOSKELETAL 30 mm TT Pro BK Kit w/dynamic Response 2 Foot Choose one product from each group to make a kit 5786 Group 1 - TT Pylon with Pyramid Alignment TT Pylon soft rod, soft spring TT Pylon medium rod, soft spring TT Pylon medium rod, medium spring TT Pylon firm rod, medium spring TTPROPYR1P TTPROPYR2P TTPROPYR2W TTPROPYR3W (max patient weight 275 lbs) TT Pylon firm rod, firm spring TTPROPYR3B Group 2 - Ankles Always use a standard ankle with a standard snubber 30 mm standard ankle white (W) with 60 ball mm standard ankle orange (O) with 70 ball mm standard ankle blue (B) with 80 ball Group 3 - Snubbers Always use a standard ankle with a standard snubber and always use a light duty ankle with a light duty snubber Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) Group 4 - Dynamic Response 2 Foot 20 mm heel height / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Left Right 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / Amputee (lbs) Amputee walks at low to medium speed and can manage small obstacles such as steps and uneven surfaces: Daily walking with rapid and variable cadence over uneven terrain and negotiating environmental obstacles: 1P 2P 2P 2W 2W 3B 3B 2P 2W 3W 3W 3B 3B 3B SPS x3 Fax:

9 ENDOSKELETAL Prosthetic mm BK Kit with Dynamic Response 2 Foot Choose one product from each group to make a kit Kit with Aluminum tube clamp Kit with Full Alignment Kit with Titanium tube clamp Group 1 - Proximal Attachment Fittings 5386ATC 5386FA 5386T Full Alignment Kit 35 mm FAKIT35 Tube Clamp Adapter Aluminum 35 mm Tube Clamp Adapter Titanium 35 mm AK35M1 Group 2 - BK Pylon Limit 10 Carbon Fiber 2.2 oz 264 lbs (K1-K3)/ 220 lbs (K4) Group 3 - Ankles Always use a standard ankle with a standard snubber 35 mm standard ankle white (W) with 60 ball mm standard ankle orange (O) with 70 ball mm standard ankle blue (B) with 80 ball Group 4 - Snubbers Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) Group 5 - Dynamic Response 2 Foot 20 mm heel height / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Left Right 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / International x3 Fax: estore.spsco.com

10 Prosthetic 90 ENDOSKELETAL 160H 35 mm AK Kit with Dynamic Response 2 Foot Choose one product from each group to make a kit a. b. c Group 1 - AK Proximal Attachment a. Full alignment kit (only use with full alignment shin) b. Single bolt male pyramid AKP3 (only use with full alignment shin) c. Single bolt short female pyramid (only use with full alignment shin) d. Single bolt long female pyramid (only use with full alignment shin) e. 4-bolt short knee alignment (only use with 4-bolt shin) f. 4-bolt pyramid alignment (only use with 4-bolt shin) C d. e. f. g. h. Group 2 - AK Frame with Catech 700R Short CaStance g. Full alignment shin with unit h. 4-bolt alignment shin with unit (Pictured with ESK knee) Group 3 - Ankles Always use a standard ankle with a standard snubber 35 mm standard ankle white (W) with 60 ball mm standard ankle orange (O) with 70 ball mm standard ankle blue (B) with 80 ball Group 4 - Snubbers Standard snubber kit white (W) Standard snubber kit orange (O) Standard snubber kit blue (B) Group 5 - Dynamic Response 2 Foot 20 mm heel height / lbs Ankle/ Snubber / lbs Ankle/ Snubber K2 Ankle Selection Chart* up to W W O B W O O B K3 Ankle Selection Chart* up to W O O B W O B B Size Left Right 22 cm cm cm cm cm cm cm cm cm Ankle Fairings (not included in system price) Size Left Right 22/23/ / / / SPS x3 Fax:

11 ENDOSKELETAL Prosthetic 91 Standard Multiflex Ankles Always use a standard ankle with a standard snubber Aluminum 30 mm = 275 lb weight limit 35 mm = 264 lb weight limit 30 mm 35 mm Demountable ankle, white, 60 ball Demountable ankle, orange, 70 ball Demountable ankle, blue, 80 ball Standard Snubbers Standard snubber kit, white, Standard snubber kit, orange, Standard snubber kit, blue, Standard Multiflex Ankle Guide (for low activity patients up to 120 lbs only) Activity Level Amputee (lbs) Up to K2 Ankle: Snubber: white white white orange orange orange blue blue K3 Ankle: Snubber: white white orange orange orange blue blue blue Note: Recommendations are for transtibial amputees. Transfemoral and bilateral amputees may require a stiffer ankle or snubber. Ankle controls plantar-flexion. If excessive plantar-flexion at ankle, fit a stiffer ankle and vice-versa. Snubber controls dorsiflexion. If excessive plantar-flexion at ankle, fit a stiffer ankle and vice-versa. International x3 Fax: estore.spsco.com

12 Prosthetic 92 ENDOSKELETAL Aluminum Multiflex Pyramid Ankle Multiaxial ankle control with heel height adjustment Ankle ball selection for plantar-flexion control Snubber selection for dorsiflexion control Activity level: K2-K3 limit: 275 lbs Ankle Snubber White (60 ) Orange (70 ) Blue (80 ) Multiflex Pyramid Ankle Single Bolt Full Alignment Tools Small Transtibial Thermoforming Tool Regular Transtibial Thermoforming Tool Lamination Tool Kit TT Pro 13 mm of vertical shock compliance and 60 of torsional rotation Reloaded forged steel coil spring for greater energy return 30 mm pylon/clamp option available for amputee weight to 275 lbs 24 month warranty Clamp Pylon Rod TTPRO30? TTPROPYR? (lbs) Activity Level K1-K2 (low-mod) K2-K3 (mod) 1P 2P 2P 2W 2W 3B 3B 2P 2W 3W 3W 3B 3B 3B Ordering Example TTPRO303B = TT Pro Clamp style with stiff torsion and stiff spring TT Pro Parts TTPROPYR2W = TT Pro Pylon style with medium torsion and medium spring Torsion Rod for TT Pro, Soft Torsion Rod for TT Pro, Medium Torsion Rod for TT Pro, Stiff SPS x3 Fax:

13 ENDOSKELETAL Prosthetic 93 Brio Ankle Patient adjustable heel height device Designed to fit all prosthetic feet with a pyramid Adjusts to 1 1 /4, size 26 cm foot 24 month warranty limit: 275 lbs; K2-K3 Alignment Note: The Brio works independently of the foot alignment and therefore users who normally wear high heels will benefit from a plantar flexed foot alignment, which will enhance the heel height achievable with the Brio. On the other hand users who like to walk barefoot will need an alignment which will allow the foot to go to foot flat position. BRIO30 Shin Fairing Plastazote cone Top Circ. Bottom Circ. Small / Medium 12 1 /2 4 1 / Large / AK Covers a. Preformed AK foam cover a. Preformed AK foam cover, left large a. Preformed AK foam cover, right large b. Discontinuous cover* *Note: Kits are also available for discontinuous covers. b. Discontinuous cover Kit for ESK+, SmartIP Knee Kit for EUK Knee Kit for Mercury Hi-Activity Knee Kit for Smart Adaptive Knee MKCVR ADPCVR Kit Accessories c. Kit for Seattle Lightfoot/Multiflex Ankle d. Snubber Assembly Tool e. Pylon Adapter Clamp c. Kit for Seattle Lightfoot/ Multiflex Ankle d. Snubber Assy Tool International x3 Fax: estore.spsco.com

14 Prosthetic 94 ENDOSKELETAL ESP - Haberman Alignment Devices High grade, lightweight Titanium construction and Part s Central Core Foundation for attachment of all other modules 182 g (HAD-CC); 97 g (HAD-CC-P) Locking Bar Wedge Included with Central Core (HAD-CC-P) 22 g (HAD-W); 10 g (HAD-W-P) HAD-CC HAD-CC-P HAD-W HAD-W-P Sliding 4-Hole Plate (threaded) 136 g (HAD-4HPT); 93 g (HAD-4HPT-AP) HAD-4HPT HAD-4HPT-AP Sliding 4-Hole Plate (unthreaded) 131 g (HAD-4HPU); 88 g (HAD-4HPU-AP) HAD-4HPU HAD-4HPU-AP Sliding Pyramid 66 g (HAD-SP); 58 g (HAD-SP-AP) HAD-SP HAD-SP-AP Sliding Pyramid Receiver 97 g (HAD-SPR); 89 g (HAD-SPR-AP) HAD-SPR HAD-SPR-AP Rotating Housing Plate Must be used with HAD-RSA 53 g (HAD-RHP) HAD-RHP Sliding Rotating Threaded Adapter Must be used with HAD-TP or HAD-TPR 86 g (HAD-SRTA); 79 g (HAD-SRTA-AP) HAD-SRTA HAD-SRTA-AP Threaded Pyramid 84 g (HAD-TP) HAD-TP Threaded Pyramid Receiver 102 g (HAD-TPR) HAD-TPR Rotating Slide Adapter Must be used with HAD-RHP 56 g (HAD-RSA); 48 g (HAD-RSA-AP) HAD-RSA HAD-RSA-AP Sliding Tube Clamp Adapter 127 g (HAD-STCA); 88 g (HAD-STCA-AP) HAD-STCA HAD-STCA-AP SPS x3 Fax:

15 ENDOSKELETAL Prosthetic 95 Fillauer - DuraShock Pylon with Rotation 60 degrees of axial rotation Shock absorption Maintenance free design Standard pylon design Less than 5 in clearance Short - minimum length is weight 30 mm: 11 oz; 34 mm: 15.2 oz Long - minimum length is weight 30 mm: 15 oz; 34 mm: 21.7 oz Max. Patient Pylon Tube Clamp Version 30 mm Short, Black 220 lbs DS001S DS001SC 30 mm Short, Blue 179 lbs DS002S DS002SC 30 mm Short, Red 144 lbs DS003S DS003SC 34 mm Short, Heavy Duty 250 lbs DS004S Max. Patient Pylon 30 mm Long, Black 220 lbs DS001L 30 mm Long, Blue 179 lbs DS002L 30 mm Long, Red 144 lbs DS003L 34 mm Long, Heavy Duty 250 lbs DS004L DuraShock Shorty Minimum build height 3.5 (8.9 mm) Dampening ring included DuraShock 30 mm Pyramid/Pyramid Receiver Black, 220 lbs DS001SS DuraShock 30 mm Pyramid/Pyramid Receiver Blue, 179 lbs DS002SS DuraShock 30 mm Pyramid/Pyramid Receiver Red, 144 lbs DS003SS International x3 Fax: estore.spsco.com

16 Prosthetic 96 ENDOSKELETAL Sfx (Stance Flexion Adapter) Adds adjustable stance flexion feature to most endoskeletal knee systems Improves stability and balance Absorbs shock for smoother gait Adjustable up to 10 3 stiffness options Available with Activated Locking Knee (W.A.L.K.), Single Axis Friction Knee (S.A.F.K.), Stabilized Pyramid Knee (S.P.K.), and Single Axis Locking Knee (S.A.L.K.) K2-K3 Product weight: 241 g Product height: 3.34 Stiffness Chart The amount of force applied to the Sfx is based on the patient s weight and height. The chart below shows which adapter is optimal with corresponding maximum ratings S=Soft, M=Medium, F=Firm Sfx Red, Soft Sfx Blue, Medium Sfx Black, Firm Max (lbs) Height (in.) S S S S S S S S M M M M M M M M F F 59 S S S S S S S S M M M M M M M F F F 60 S S S S S S S S M M M M M M M F F F 61 S S S S S S S M M M M M M M F F F F 62 S S S S S S S M M M M M M M F F F F 63 S S S S S S S M M M M M M M F F F F 64 S S S S S S M M M M M M M F F F F F 65 S S S S S S M M M M M M M F F F F F 66 S S S S S S M M M M M M M F F F F F 67 S S S S S S M M M M M M F F F F F F 68 S S S S S S M M M M M M F F F F F F 69 S S S S S M M M M M M F F F F F F F 70 S S S S S M M M M M M F F F F F F F 71 S S S S S M M M M M M F F F F F F F 72 S S S S S M M M M M M F F F F F F F 73 S S S S S M M M M M F F F F F F F F 74 S S S S M M M M M M F F F F F F F F 75 S S S S M M M M M M F F F F F F F F 76 S S S S M M M M M M F F F F F F F F 77 S S S S M M M M M F F F F F F F F F 78 S S S S M M M M M F F F F F F F F F SPS x3 Fax:

17 ENDOSKELETAL Prosthetic 97 Fillauer - Components A-P & M-L Slide Unit with Rotation and Pyramid With top plate assembly and pyramid A-P & M-L Slide Unit With pyramid and socket attachment plate Universal Coupling Ring with Screws When rotation and disconnect are required Adapter Ring with Screws, Anodized A A-P & M-L Slide Unit With pyramid receiver and rotation A-P & M-L Slide Unit With two socket attachment plates A-P & M-L Slide Unit with Rotation and Socket Attachment With top plate assembly and socket attachment plate Universal Coupling Ring with Top Plate Rotatable Socket Adapter Assembly With pyramid receiver Screws available separately (880290) Hole Spacer Plate 1 /4 4-Hole Spacer Plate 1 / Multi Position Casting Alignment Plate Attachment Plate for Thermoplastic Threaded center hole, accepts shuttle lock International x3 Fax: estore.spsco.com

18 Prosthetic 98 ENDOSKELETAL Fillauer Components (continued) Pylon Tube Clamp Aluminum with pyramid receiver, 30 mm Limit: 300 lbs Aluminum Pylon Tube 30 mm x mm x mm x 36 Limit: 300 lbs Aluminum Pylon Tube with Aluminum Adapter 30 mm x mm x 17 Limit: 300 lbs Aluminum Pylon Tube with Titanium Adapter 30 mm x mm x 17 Limit: 300 lbs Socket Attachment Plate Aluminum with titanium pyramid Limit: 300 lbs Includes screws Socket Attachment Plate with Through Hole Aluminum with titanium pyramid and through hole Limit: 300 lbs Includes screws 4-Hole Pyramid Adapter steel Limit: 300 lbs Sach Foot Adapter Pyramid Aluminum with stainless steel pyramid Sach Foot Spacer Plates 1 /2 1 / Transtibial Socket Pyramid Adapter steel with lamination cap Limit: 220 lbs Hole Distal Attachment Block Limit: 220 lbs Low profile K-Plates 10 mm 13 mm 19 mm 25 mm 37 mm SPS x3 Fax:

19 ENDOSKELETAL Prosthetic 99 Spectrum - Super Seven Shift Components Designed to fit standard 30 mm systems Extremely versatile allowing precise linear adjustment while maintaining original alignment setting The Spectrum Alignment Components are rated for use in definitive prosthesis for persons weighing up to 220 lbs Pyramid Receiver with Female Dovetail Pyramid Receiver with Male Dovetail Pyramid with Female Dovetail Pyramid with Male Dovetail mm Tube Clamp Adapter with Female Dovetail Male to Female Dovetail Adapter Hole Plate with Male Dovetail Fillauer XD Line The XD Line components are rated for use with patients weighing up to 440 lbs 34 mm XD Pylon 17 length mm Tube Clamp, Titanium XD 4-Prong Lamination Adapter International x3 Fax: estore.spsco.com

20 Prosthetic 100 ENDOSKELETAL Hosmer Components Socket Attachment Block Rated to 300 lbs, Standard M6 x 10 x 20 mm Socket attachment block screw (60329) Includes: Laminating Cover (60281) AK Socket Adapter steel with pyramid Rated to 300 lbs Includes: Laminating Cap (60299) AK Rotatable Male Adapter steel with pyramid Rated to 300 lbs Threaded Pyramid Only steel (for use with or AK rotatable adapters) Rated to 300 lbs Includes: Clamp screws M5 (56353), Thread Socket Adapter (61416), Lamination Cap (60299) AK Rotatable Female Socket Adapter steel with pyramid receiver Rated to 300 lbs BK Socket Adapter, Titanium, Through Hole Rated to 300 lbs BK Socket Adapter steel with pyramid Rated to 220 lbs Includes: Laminating Cap (60299) BK Socket Adapter with Through Hole steel with pyramid Rated to 220 lbs Above Knee Rotator - (TFR 300) Facilitates cross-legged sitting, entering and exiting cars Smooth, one-handed, push-button operation Self-adjusting, reliable automatic lock rated to 300 lbs Includes: Adjustment Screws Dual Adapters Titanium-rated to 300 lbs Includes: Alignment Adjustment Screw (60248) 32 mm 45 mm 60 mm 75 mm Dual Adapters Aluminum-rated to 220 lbs Includes: Alignment Adjustment Screw (60248) 32 mm 45 mm 60 mm 75 mm SPS x3 Fax:

21 ENDOSKELETAL Prosthetic 101 Hosmer Components (continued) Material Rotatable Adapter with Pyramid Receiver - Titanium (82 g)/ (126 g) Rated to 300 lbs Titanium Pyramid 4-Hole Adapter with Through Hole, Titanium (50 g) Pyramid 4-Hole Adapter without Through Hole, SS (104 g) Rated to 300 lbs AK Rotatable Pyramid Adapter, Titanium (129 g) AK Rotatable Pyramid Adapter, (153 g) 100 mm length Rated to 300 lbs Includes: Socket attachment screw (60329) and Back Plate (60290) Short Adapter Tube Titanium (rated to 300 lbs) 100 mm length Short Adapter Tube Aluminum (rated to 220 lbs) 200 mm length Includes: Alignment Adjustment Screw (60248) Titanium Titanium Titanium Aluminum Back Plate Tube Clamp - Tube Clamp - Titanium 30 mm Rated to 300 lbs Titanium HD Tube with Adapter, 12 (60430) and 16 (60429) HD Tube with Adapter, 12 (60246) and 16 (60245) Rated to 300 lbs Includes: Alignment Adjustment Screw (60248) Titanium Aluminum Tube without Adapter, 36" Rated to 300 lbs Includes: Alignment Adjustment Screw (60248) Aluminum SACH Foot Adapter Rated to 300 lbs Titanium SACH Foot Plastic Connector Plate Only International x3 Fax: estore.spsco.com

22 Prosthetic 102 ENDOSKELETAL Grace Prosthetic - Grace Plate A thermoplastic socket adapter, with a 4-Hole European pattern design that fits most prosthetic components Fabricated with aircraft aluminum, and comes with a set of long and short screws Limit: 300 lbs Modified Grace Plate A thermoplastic socket adapter, with a 4-Hole European pattern design that fits most prosthetic components in conjunction with various shuttle lock systems Fabricated with aircraft aluminum, and comes complete with all the screws needed to adapt to the various shuttle locks 1210M M Grace Spacer Plate A round, light-weight 1 /8 aluminum 4-Hole spacer plate designed for use between the socket and 4-Hole pyramid adapter The unique design makes the Grace Spacer Plate an ideal component when used in conjunction with the Grace Plate 1934 Suction Grace Plate Allows preservation of the limb s distal end by incorporating a hidden one-way suction valve Requires a double lamination 1210-S2 Modular Offset 4-Hole Mounting Plate Material Limit Height 9 mm Aluminum 225 lbs 1 /4 OA09 13 mm Aluminum 225 lbs 1 /4 OA13 19 mm Aluminum 225 lbs 1 /4 OA19 25 mm Aluminum 225 lbs 5 /16 OA25 37 mm Aluminum 225 lbs 3 /8 OA37 SPS x3 Fax:

23 ENDOSKELETAL Prosthetic 103 Medi USA - Rotatable Adapter SS 4-Hole female adjustable Adjusts in half the time; simply loosen any two adjacent alignment screws to rotate, then re-tighten Rotatable Adapter, female version Rotatable Adapter, male version Clever Bone System M BL149M Energy returning carbon system By compensating ground reaction forces and transforming these into energy that makes the gait more economic, the user achieves a more ergonomic gait which enables him to use the prosthesis 130% longer and to take more steps everyday Cut with hacksaw and cutting tool below Compatible with all feet incorporating a proximal pyramid limit 220 lbs Size Name Small Clever Bone rod, 39 2 /5 (1 m) Medium Clever Bone rod, 39 2 /5 (1 m) Large Clever Bone rod, 39 2 /5 (1 m) X-Large Clever Bone rod, 39 2 /5 (1 m) Receivers Clever Bone Pyramid Receiver Clever Bone Tube Clamp Receiver Accessory Cutting Tool for Clever Bone Determining the Hardness Grade System Length Above Knee (in cm) Patient over 30 Under 132 lbs S S S M M lbs S S M M L lbs S M M L L lbs M L L XL XL lbs L L XL XL XL International x3 Fax: estore.spsco.com

24 Prosthetic 104 ENDOSKELETAL Orthocare Innovations - Galileo Enhances documentation and device utilization justification Addresses payer demand for increased evidence of patient function Creates mechanism for determining device replacement intervals Provides greater compliance/fraud and abuse protection Consists of a one week period of activity measurement using the unobtrusive StepWatch StepWatch (pictured) Easy HIPAA-compliant upload of patient data to a secure Web server for assessment using proprietary algorithms Patient record and functional level report is downloaded by the clinician for incorporation into the claims filed by the payer Galileo Clinician Suite 1 year Galileo subscription Unlimited Functional Level Reports 1 year lease of 5 StepWatch Activity Monitors 1 year lease of StepWatch dock StepWatch is recognized as a gold standard in physical activity monitoring GK100 Galileo Facility Suite 1 year Galileo subscription Unlimited Functional Level Reports 1 year lease of 10 StepWatch Activity Monitors 1 year lease of StepWatch dock GK200 Galileo Practice Suite 1 year Galileo subscription Unlimited Functional Level Reports 1 year lease of 20 StepWatch Activity Monitors 1 year lease of StepWatch dock GK300 SPS x3 Fax:

25 ENDOSKELETAL Prosthetic 105 StepWatch Insurance Annual Insurance against the loss of 1 StepWatch monitor GK05 StepWatch Strap Pack 2 small StepWatch Velcro straps 2 medium StepWatch Velcro straps 2 large StepWatch Velcro straps GK10 Smart Pyramid Dynamic alignment technology and feedback Patient engagement via biofeedback Improved balance and safety Decreased socket/interface stress Prosthetic technology utilization data Real-time device monitoring Integrated monitoring and evaluation software; free software updates and revisions Runs on 4 rechargeable AA batteries (included with charger) Build Height: 17 mm : 134 g Limit: 300 lbs 1 year warranty Compas Master Unit Mates directly with the Smart Pyramid, providing power, orientation and wireless connectivity A unique instrument for integrating electronic hardware directly into the prosthesis Compas hardware and software work together automatically for computerized alignment interpretation Software provides real-time gait analysis Communicates with PC via Bluetooth Tube Clamp Adapter For use with Compas and Smart Pyramid International x3 Fax: estore.spsco.com

26 Prosthetic 106 ENDOSKELETAL Ossur - Standard Adapters (rated to 100 kg/220 lbs moderate impact) Socket Adapters Material Length 4-Hole Socket Adapter Height: 12 mm ( 1 /2 ) Aluminum 70 g/2.5 oz A Male Pyramid Insert for Prong Height: 31 mm (1 3 /16 ) Aluminum/ 54 g/1.9 oz A Female Pyramid Insert for Prong Height: 23 mm ( 15 /16 ) Titanium 54 g/1.9 oz A g/1.3 oz A Hole Adapters with Screws 4-Hole Male Pyramid Height: 14 mm ( 9 /16 ) Aluminum/ 62 g/2.2 oz A Hole Female Pyramid Height: 16 mm ( 5 /8 ) Aluminum 46 g/1.6 oz A Tube Clamps Male Pyramid Tube Clamp Height: 56 mm (2 3 /16 ) Aluminum/ 62 g/2.2 oz A Female Pyramid Tube Clamp Height: 50 mm (2 ) Aluminum 64 g/2.3 oz A Hole Tube Clamp Height: 38 mm (1 1 /2 ) Aluminum 52 g/1.8 oz A Single Adapters Male Single Adapter - Short Build Height: 35.5 mm (1 3 /8 ) Aluminum/ Pyramid 50 mm (2 ) 60 g/2.1 oz A Male Single Adapter - Long Build Height: 63 mm (2 1 /2 ) Aluminum/ Pyramid 77 mm (3 ) can be cut to 70 mm (2 3 /4 ) 86 g/3.0 oz A SPS x3 Fax:

27 ENDOSKELETAL Prosthetic 107 Ossur Single Adapters (continued) Material Length Female Single Adapter Build Height: 100 mm (4 ) Aluminum 100 mm (4 ) can be cut to 60 mm (2 3 /8 ) 86 g/3.0 oz A Fixed Offset Adapter mm Build Height: 30 mm ( 13 /16 ) Aluminum 78 mm (3 ) 172 g/ 6.05 oz A Double Adapters Female Double Adapter Aluminum 32 mm (1 1 /4 ) 45 mm (1 3 /4 ) 60 mm (2 3 /8 ) 75 mm (3 ) 66 g/2.3 oz 76 g/2.7 oz 88 g/3.1 oz 100 g/3.5 oz A A A A Male Double Adapter Build Height: (12 mm ( 1 /2 ) Aluminum/ 41 mm (1 5 /8 ) 84 g/3.0 oz A Female Pylon Short Rating: 100 kg/220 lbs Aluminum/ Pylons and Tubes 250 mm (9 3 /4 ) A Female Pylon Long Rating: 100 kg/220 lbs Aluminum/ 400 mm (15 3 /4 ) A International x3 Fax: estore.spsco.com

28 Prosthetic 108 ENDOSKELETAL Ossur Standard Adapters (rated to 166 kg/365 lbs moderate impact) Female Pylon - Short Female Pylon - Long Female Pylon Kit 1 - Short Pylon Kits Material Length Female Pylon Kit 1 - Long Each with female adapter Includes: A female adapter A or A carbon tube Titanium/ Carbon Titanium/ Carbon 250 mm (9 3 /4 ) 400 mm (15 3 /4 ) 250 mm (9 3 /4 ) 400 mm (15 3 /4 ) A A A A Female Pylon Kit 2 - Short 250 mm (9 3 /4 ) A Female Pylon Kit 2 - Long Each with male & female adapter Includes: A female adapter A male adapter A or A carbon tube Titanium/ Carbon 400 mm (15 3 /4 ) A Socket Adapters Material Male Pyramid Socket Adapter Height: 25 mm (1 1 /4 ) Titanium 58 g/2.1 oz A Hole Socket Adapter Height: 12 mm ( 1 /2 ) Titanium 112 g/4.0 oz A Prong Socket Adapter Height: 8 mm ( 1 /2 ) 154 g/5.4 oz A Prong Socket Adapter Height: 8 mm ( 5 /16 ) 124 g/4.4 oz A Male Pyramid Insert for Prong Height: 31 mm (1 1 /4 ) Titanium 56 g/2 oz A SPS x3 Fax:

29 ENDOSKELETAL Prosthetic 109 Ossur Socket Adapters (continued) Material Female Pyramid Insert for Prong Height: 23 mm ( 7 /8 ) Titanium 53 g/1.9 oz A Female Pyramid Insert for Prong LP Height: 9 mm ( 3 /8 ) Titanium 33 g/1.16 oz A Hole Adapters, with Screws (rated to 365 lbs) Material 4-Hole Male Pyramid Height: 23 mm ( 7 /8 ) Titanium 54 g/1.9 oz A Hole Male Pyramid with 5 /16 (8 mm) Offset Height: 23 mm ( 7 /8 ) Titanium 65 g/2.3 oz A Hole Male Pyramid with Rotation Height: 25 mm (1 ) Titanium 72 g/2.5 oz A Hole Female Pyramid Height: 15.5 mm ( 5 /8 ) Titanium 64 g/2.3 oz A Hole Female Pyramid with Rotation Height: 17.5 mm ( 11 /16 ) Titanium 76 g/2.7 oz A Tube Clamps Male Pyramid Tube Clamp Height: 56 mm (2 3 /16 ) Titanium 62 g/2.2 oz A Female Pyramid Tube Clamp Height: 50 mm (2 ) Titanium 78 g/2.8 oz A International x3 Fax: estore.spsco.com

30 Prosthetic 110 ENDOSKELETAL Ossur Tube Clamps (continued) Material 4-Hole Tube Clamp Height: 38 mm (1 1 /2 ) Titanium 68 g/2.4 oz A Male Single Adapter Short Length: 50 mm (2 ) Build Height: 35.5 mm ( 3 /16 ) Single Adapters Titanium 66 g/2.3 oz A Male Single Adapter Long Length: 77 mm (3 ) - can be cut to 70 mm (2 3 /4 ) Build Height: 63 mm (1 1 /2 ) Titanium 102 g/3.6 oz A Female Single Adapter Height: 100 mm (3 15 /16 ) - can be cut to 60 mm (2 3 /8 ) Build Height: 100 mm Titanium 118 g/4.2 oz A Double Adapters Female Double Adapter mm/1 1 /4 Heights: 32 mm/1 1 /4 45 mm/1 3 /4 60 mm/2 3 /8 75 mm /2 15 /16 Titanium 90 g/3.2 oz 102 g/3.6 oz 119 g/4.2 oz 135 g/4 oz A A A A Male Double Adapter Height: 41 mm (1 5 /8 ) Titanium 98 g/3.5 oz A Total Shock System Reduces both rotary forces on the knee joint and shear forces on the residual limb Slimmer profile for easier covering Vertical compression & axial rotation 10 in each direction 12 month warranty; 220 lb weight limit Height Tube Clamp 5 1 /2 270 g 4400 Female Pyramid 5 3 /4 300 g 4410 SPS x3 Fax:

31 ENDOSKELETAL Prosthetic 111 Material Otto Bock - Modular Components Bolt Accessories Limit Product 2D7=M8 220 lbs 65 g 2R31=M8 Foot Adapter with Bolt Titanium Foot Adapter with Bolt 2D7=M lbs 70 g 2R31=M10-5 2D6=M8 220 lbs 120 g 2R8=M8 2D6=M lbs 130 g 2R8=M10 Connection Plate Plastic 2R14 30 mm Tube with Adapter lbs 315 g 2R3 30 mm Pylon Tube with Adapter Titanium lbs 275 g 2R38=5 30 mm Pylon Tube with Adapter Aluminum lbs 240 g 2R49 30 mm Pylon Tube with 10 Angled Tube Adapter Titanium lbs 275 g 2R38=10 34 mm Pylon Tube with Tube Adapter Titanium lbs 330 g 2R58 34 mm Pylon Tube with Tube Adapter Titanium lbs 220 g 2R57 34 mm Pylon Tube with Tube Adapter lbs 370 g 2R77 34 mm Pylon Tube with Tube Adapter lbs 260 g 2R76 International x3 Fax: estore.spsco.com

32 Prosthetic 112 ENDOSKELETAL BK Socket Adapter Includes 4x3 and 4x52 lamination dummies Designed for lamination into transtibial socket 4-Prong Lamination Adapter 4-Prong Lamination Adapter with Hole Otto Bock Modular Components (continued) Material Titanium Limit 220 lbs Product 55 g 4R g 4R lbs 95 g 4R63= lbs 95 g 4R63=5 4-Prong Adapter with Pyramid - Rotatable 330 lbs 165 g 4R116 4-Prong Adapter with Adjustable Screws - Rotatable 330 lbs 155 g 4R111 Socket Adapter with Rotation Adjustment without Insert 330 lbs 80 g 4R111=N Socket Adapter with Pyramid Includes 4x3 lamination dummy 330 lbs 130 g 4R42 4R42=5 Socket Adapter with Pyramid - Rotatable Order 4x46 lamination dummy separately 275 lbs 180 g 4R89 Pyramid Adapter with Threaded Connector Special order item Works with 4R89 85 g 4R87 Socket Adapter with Pyramid Receiver - Rotatable Order 4x46 lamination dummy separately 275 lbs 170 g 4R41 Lamination Anchor Threaded 275 lbs 95 g 4R43 SPS x3 Fax:

33 ENDOSKELETAL Prosthetic Hole Socket Adapter with Pyramid Otto Bock Modular Components (continued) Material Limit Product 275 lbs 85 g 4R23 4-Hole Socket Adapter with Pyramid With Hole Socket Adapter with Pyramid - Rotatable Pyramid has a 11 mm drill hole Titanium 300 lbs 50 g 4R54=5 Aluminum 220 lbs 55 g 4R74 Titanium 330 lbs 70 g 4R77 Socket Adapter Axially shifted 7 mm Enables a sliding adjustment in the sagittal and frontal plane Socket Adapter Diagonally shifted 5 mm Enables a 45 combination in the sagittal and frontal plane Titanium 330 lbs 60 g 4R73=A-5.1 Titanium 330 lbs 60 g 4R73=D-5 Socket Adapter with Pyramid Receiver Titanium 330 lbs 50 g 4R lbs 85 g 4R22 Socket Adapter with Pyramid Receiver - Rotatable Titanium 330 lbs 80 g 4R lbs 140 g 4R37 Double Adapter 60 mm Titanium 220 lbs 215 g 4R104=60 Double Adapter 75 mm Titanium 220 lbs 225 g 4R104=75 Double Adapter 35 mm with Pyramid Titanium 330 lbs 115 g 4R84 Double Adapter 6.5 mm 330 lbs 115 g 4R78 International x3 Fax: estore.spsco.com

34 Prosthetic 114 ENDOSKELETAL Otto Bock Modular Components (continued) Material Limit Product Connection Adapter 30 mm with Pyramid Receiver Connection Adapter 30 mm (short - 66 mm) Titanium 330 lbs 65 g 4R84=D 330 lbs 145 g 4R84=D-62 Titanium 330 lbs 70 g 4R72=D Connection Adapter 30 mm (long - 96 mm) 330 lbs 150 g 4R72=D-62 Sliding Adapter Mounts between socket attachment block and socket adapter Allows independent shifts in frontal and sagittal planes Slide range +11 mm Adapter Plate Optimizes alignment and fitting of modular limb prostheses Slide range mm 4-Hole Spacer Plate Height: 3 mm Aluminum 220 lbs 205 g 4R101 Aluminum 275 lbs 75 g 4R118 4R415 Material Otto Bock Modular Components Minimum Clearance Limit Product 30 mm Tube Clamp Adapter Titanium 48 mm 300 lbs 75 g 4R52=5 30 mm Tube Clamp Adapter Aluminum 47 mm 220 lbs 75 g 4R69=5 30 mm Tube Clamp Adapter 48 mm 275 lbs 130 g 4R21=5 30 mm Sliding Adapter Titanium 68 mm 187 lbs 185 g 4R mm Sliding Adapter Aluminum 72 mm 165 lbs 150 g 4R98 SPS x3 Fax:

35 ENDOSKELETAL Prosthetic 115 Otto Bock Modular Components (continued) Material Minimum Clearance Limit Product 34 mm Tube Clamp Adapter 51 mm 330 lbs 140 g 4R91 34 mm Sliding Adapter Titanium 76 mm 220 lbs 185 g 4R88 34 mm Tube Clamp Adapter Titanium 51 mm 330 lbs 95 g 4R82 Female Double Adapter 10 Angled Tube Clamp Adapter 20 Angled Tube Clamp Adapter Titanium 32 mm 45 mm 60 mm 75 mm 330 lbs 85 g 95 g 110 g 125 g 4R72=32 4R72=45 4R72=60 4R72=75 Titanium 53 mm 220 lbs 85g 4R56 Titanium 58 mm 220 lbs 85g 4R56=1 Socket Attachment Block Minimal Clearance after trimming is 24 mm Height = 64 mm (5R1=1 and 5R1=2); 30 mm (5R1=6) Diameter = 147 mm (5R1=1); 120 mm (5R1=2 and 5R1=6) Otto Bock - Modular Components Material Wood Limit 275 lbs Product 445 g 5R1=1 335 g 5R1=2 155 g 5R1=6 Socket Attachment Block Minimal Clearance after trimming is 24 mm Dia. = 120 mm Wood 330 lbs 240 g 5R1=6-H Lamination Ring Aluminum 330 lbs 70 g 5R2 International x3 Fax: estore.spsco.com

36 Prosthetic 116 ENDOSKELETAL Torsion Adapter Optimizes movement and gait symmetry Increased mobility and lower stress on the residual limb makes greater mobility and comfort possible during leisure activities Marked reduction of painful shear forces in the stump area; Improved prevention of subsequent damage Suitable for all mobility levels steel Max torque-resistance adjustable from 7-19 Nm Product weight: 340 g limit: 275 lbs 4R40 Shamp Bionics - Extend-A-Tube Alignment and length easily adjustable anytime Strong, lightweight, corrosion-resistant, Space Age alloy Easily adapts to Knee Components SPS x3 Fax:

37 ENDOSKELETAL Prosthetic 117 TiMed - Components Titanium Components (rated 300 lbs) Material Limit Product 4-Hole Rotating Base with Pyramid Receiver Titanium 300 lbs 94 g A-526 Flexible 3-Ear Connector Titanium 300 lbs 61 g A Prong Rotating Adapter with Titanium Pyramid Receiver / Titanium 300 lbs 160 g A mm Tube Clamp Titanium 300 lbs 83 g A-503T 4 Hole Connector with Pyramid Titanium 300 lbs 59 g A Hole Connector without Pyramid Hole Titanium 350 lbs 56 g A-692 HD 4 Hole Connector with 8 mm Diagonal Offset Pyramid Titanium 300 lbs 71 g A Hole Connector with 6.5 mm Axial Offset Pyramid Titanium 300 lbs 70 g A Hole Connector with Pyramid Receiver Titanium 300 lbs 63 g A-193 Double Ended Adapter, 32 mm Titanium 300 lbs 86 g A-401 Double Ended Adapter, 45 mm Titanium 300 lbs 99 g A-402 International x3 Fax: estore.spsco.com

38 Prosthetic 118 ENDOSKELETAL TiMed Titanium Components (continued) Material Limit Product Double Ended Adapter, 60 mm Titanium 300 lbs 104 g A-403 Double Ended Adapter, 75 mm Titanium 300 lbs 116 g A mm Tube with Pyramid Receiver Titanium 300 lbs 123 g A Hole Rotating Base Titanium 300 lbs 39 g A-502 Rotating Pyramid Titanium 300 lbs 52 g A-505 Rotating Pyramid with Hole Titanium 300 lbs 39 g A-507 Rotating Pyramid Receiver Titanium 300 lbs 50 g A Hole Rotating Base with Pyramid Titanium 300 lbs 98 g A Ear Connector with Hole Lamination dummy included Titanium 300 lbs 50 g A Ear Connector Lamination dummy included Titanium 350 lbs 55 g A-610 HD 3 Prong Rotating Adapter with Titanium Pyramid adapter/ Titanium pyramid 300 lbs 160 g A Rotating Pyramid Receiver, Adjustable Length Titanium 300 lbs 164 g A-415 SPS x3 Fax:

39 ENDOSKELETAL Prosthetic 119 TiMed Titanium Components (continued) Material Limit Product Double Ended Pyramid Adapter 30 mm Tube Clamp with Pyramid Titanium 300 lbs 78 g A-210 Titanium 300 lbs 71 g A-504 Heavy Duty Tube Clamp Titanium 300 lbs 95 g A-613 HD 5 mm Offset Tube Clamp, 30 mm Titanium 300 lbs 89 g A-805 SACH Foot Adapter with M10 Bolt Titanium 350 lbs 90 g A-509 HD Modular Components 4 Hole Connector with Pyramid 275 lbs 106 g SS-192 Threaded 4 Hole Laminating Ring 300 lbs 61 g A Prong Rotating Adapter 300 lbs 109 g SS-511 Lamination Dummy for 3-Prong Rotating Adapter Plastic T-300 Rotating Pyramid Receiver 275 lbs 69 g SS-506 International x3 Fax: estore.spsco.com

40 Prosthetic 120 ENDOSKELETAL TiMed Modular Components (continued) Material Limit Product Tube Clamp, 30 mm 275 lbs 130 g SS mm Offset Tube Clamp, 30 mm 275 lbs 139 g SS-805 SACH Foot Adapter with M10 Bolt 275 lbs 113 g SS Hole Connector with Pyramid Aluminum 220 lbs 63 g AL Sliding/Rotatable Pyramid Adapter Lamination dummy included Titanium 220 lbs 170 g ST Ear Connector with Pyramid Lamination dummy included Aluminum 220 lbs 64 g AL-510 Tube Clamp, 30 mm Aluminum 220 lbs 89 g AL-503 Rotating Pyramid Receiver Aluminum 220 lbs 38 g AL-506 SACH Foot Adapter with M10 Bolt Aluminum 220 lbs 108 g AL Prong Rotating Adapter 300 lbs 145 g SS-521 SPS x3 Fax:

41 ENDOSKELETAL Prosthetic 121 TiMed Modular Components (continued) Material Limit Product 4 Ear Rotating Connector Base Aluminum 220 lbs 42 g AL-702 Pylons/Tubes Material Length Low Profile Tube Assembly (rated to 250 lbs) Titanium receiver/ Aluminum pylon 400 mm (15.74 ) Product 289 g A-712 Tube Clamp Assembly (rated to 220 lbs) Aluminum 400 mm (15.74 ) 310 g AL-512 Aluminum Tube, 30 mm (rated to 300 lbs) Aluminum 380 mm (15 ) 236 g A-100 Carbon Fiber Tube, 30 mm (rated to 350 lbs) Carbon fiber 300 mm (12 ) 145 g A-200HD Tube Clamp Assembly (rated to 250 lbs) Titanium receiver/ Aluminum pylon 400 mm (15.74 ) 295 g A-512 Heavy Duty Tube Clamp Assembly (rated to 300 lbs) Titanium receiver/ Aluminum pylon 400 mm (15.74 ) 306 g A-612 Aluminum Tube, 30 mm (rated to 250 lbs) Aluminum g A-300 Carbon Fiber Tube, 34 mm (rated to 500 lbs) Carbon g A-500XHD International x3 Fax: estore.spsco.com

42 Prosthetic 122 ENDOSKELETAL BK-100 Kit Includes: AL-503 (Aluminum tube clamp) AL-512 (Aluminum pylon with integrated receiver) BK-200 Kit Includes: A-192 (Titanium 4-Hole connector with pyramid) A-503T (Titanium tube clamp) A-512 (Aluminum pylon with titanium receiver) A-509 HD (Titanium SACH foot adapter with bolt) BK-301 Kit Includes: A-503T (Titanium tube clamp) A-612 (Aluminum pylon with titanium receiver) BK-304 Kit Includes: A-192 (Titanium 4-Hole connector with pyramid) A-503T (Titanium tube clamp) A-612 (Aluminum pylon with titanium receiver) BK-350 Kit Includes: A-692 HD (Titanium 4-Hole connector) A-613 HD (Titanium heavy duty tube clamp) A-200 HD (30 mm carbon tube) A-509 HD (Titanium SACH foot adapter with bolt) BK-500 Kit Includes: EX-610 XHD (4-ear connector) A-500XHD (34 mm carbon pylon) EH-503 XHD (34 mm tube clamp) TiMed -Rated Kits Material Limit Aluminum 220 lbs BK-100 Titanium/ Aluminum Titanium/ Aluminum Titanium/ Aluminum Titanium/ Carbon Titanium/ Carbon 250 lbs BK lbs BK lbs BK lbs BK lbs BK-500 Extra Heavy-Duty Components Material Limit Product Extra Heavy Duty 4 Hole Connector without Pyramid Hole Titanium 500 lbs (227 kg) EH-692 Extra Heavy Duty Tube with Pyramid Receiver Titanium 500 lbs (227 kg) 290 g EH-405XHD Extra Heavy Duty 4 Ear Connector Titanium 500 lbs (227 kg) 156 g EH-610XHD Extra Heavy Duty 34 mm Tube Clamp Titanium 500 lbs (227 kg) 181 g EH-503XHD SPS x3 Fax:

43 ENDOSKELETAL Prosthetic 123 Trulife - Cup Connector Kit for Thermoforming Limit: 220 lbs (100 kg) Titanium, Small 132 g P15107 Titanium, Large 154 g P15108 Modular 4-Hole Mounting Plate Limit Material Round 4-Hole 300 lbs Nylon SSA230 4-Hole with center hole threaded for shuttle lock 4-Hole with 6 small mounting holes for shuttle lock 4-Hole Spacer Plate (not pictured) 300 lbs Aluminum lbs Aluminum Aluminum P29316 International x3 Fax: estore.spsco.com

44 Prosthetic 124 ENDOSKELETAL Composite Pylon Selection Composite 30 mm x 17 Pylons Available in 7 flexes, each designed to support a specific weight/ activity level combination To optimize the pylon s performance, it is important to choose the appropriate spring level for each patient Replace? with flex number from chart below Follow the steps below to determine the appropriate flex. 1. Locate the column associated with the amputee s activity level. 2. Locate the row that corresponds to the amputee s weight. 3. The area where the column and row intersect lists the appropriate flex level. Important Note: If the amputee has a long BK limb, carries heavy loads or will reach a higher activity level within one year, choose the next category higher. Warning: Choosing a lower strength flex than what is suggested based on the above procedure and patient data will void the warranty. A: B: Part Limit Adapter A Pylon Only 300 lbs SSL250-P? A Pylon Only 366 lbs SSL250-P7 B Pylon with female pyramid receiver 300 lbs Titanium SSL250-B? B Pylon with female pyramid receiver 366 lbs Titanium SSL250-B7 Flex kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg lbs > 35 kg > 80 lbs Low Medium-Low Medium Medium-High High Walking with Aid Limited Walking Walking on Uneven Surfaces Light Sports Running, Basketball SPS x3 Fax:

45 ENDOSKELETAL Prosthetic 125 Trulife Components Pylons (30 mm) Product Length Limit Adapter Material Aluminum Pylon Only Aluminum Pylon bonded to Female Adapter 219 g 43 cm/ lbs N/A SPA200-P 550 g 90 cm/ lbs N/A P g 43 cm/ lbs Aluminum P17018 Aluminum Pylon bonded to Female Adapter Heavy Duty Aluminum Pylon bonded to Female Adapter Aluminum Pylon with female pyramid receiver 280 g 43 cm/ lbs Titanium SPA200-B 318 g 43 cm/ lbs SPA200-S 273 g 25 cm/ lbs Titanium P g 25 cm/ lbs P g 25 cm/ lbs Titanium P15111 Aluminum Pylon with male pyramid 318 g 43 cm/ lbs Titanium SPA200-M SACH Adapter Kit Includes: SCA225 (Clamp Adapter) SPA200-B (Aluminum Pylon with female adapter) SCA242 (Titanium SACH Foot Adapter) 43 cm/ lbs Titanium/ Aluminum SCAKIT-01 Product Foot Adapters Limit Material Standard Foot Adapter 47 g 366 lbs Titanium SCA240 Heavy Duty Foot Adapter 52 g 366 lbs Titanium SCA240-HD SACH Foot Adapter 46 g 300 lbs Titanium SCA242 SACH Foot Adapter with Bolt 110 g 220 lbs Aluminum P17000 SACH Foot Adapter 88 g 300 lbs SCA281 SACH Foot Adapter with Bolt 46 g 300 lbs Titanium P15100 Female Foot Adapter 120 g 300 lbs Titanium SCA241 International x3 Fax: estore.spsco.com

46 Prosthetic 126 ENDOSKELETAL Trulife - 4-Prong Socket Adapters with Dummy Product Limit Material 4-prong Regular Solid Pyramid Lamination dummy included 93 g 300 lbs SCA262 4-prong Regular with 5 /16 hole for valve Lamination dummy included 60 g 220 lbs Aluminum P g 225 lbs Titanium SCA232 4-prong Large with 5 /16 hole for valve Lamination dummy included 86 g 300 lbs P g 300 lbs Titanium SCA g 366 lbs Titanium SCA233-HD Adapters 4-Hole Rotatable Pyramid Base only 87 g 300 lbs Titanium SCA212 4-Hole Female Pyramid Receiver 91 g 300 lbs Titanium P Hole Female Rotatable Pyramid Receiver 142 g 300 lbs Titanium SCA214 4-Hole Female Pyramid Receiver Insert 55 g 300 lbs Titanium SCA Hole 360 Rotatable Pyramid Adapter (screws) 134 g 300 lbs Titanium SCA216 Rotatable Pyramid Adapter Insert 47 g 300 lbs Titanium SCA Hole Pyramid Adapter with Hole (screws) 72 g 300 lbs Titanium SCA217 Tube Clamp Adapter 69 g 300 lbs Titanium SCA g 366 lbs Titanium SCA225-HD 68 g 220 lbs Aluminum P17001 Adjustable Clamp Adapter 109 g 300 lbs SCA270 SPS x3 Fax:

47 ENDOSKELETAL Prosthetic 127 Product Adapters (continued) Limit Material Tube Clamp Adapter, angled g 300 lbs P g 350 lbs Titanium P15124 Adjustable Clamp Pyramid 61 g 300 lbs Titanium SCA g 300 lbs Titanium SCA221 Height Adapter, 32 mm 95 g 366 lbs Titanium SCA221-HD Height Adapter, 45 mm 93 g 300 lbs Titanium SCA g 366 lbs Titanium SCA222-HD Height Adapter, 60 mm 106 g 300 lbs Titanium SCA g 366 lbs Titanium SCA223-HD 130 g 300 lbs Titanium SCA224 Height Adapter, 75 mm 140 g 366 lbs Titanium SCA224-HD Variable Height Adapter, 32 mm 91 g 300 lbs Aluminum P15031 Variable Height Adapter, 44 mm 113 g 300 lbs Aluminum P15032 Variable Height Adapter, 57 mm 136 g 300 lbs Aluminum P15033 International x3 Fax: estore.spsco.com

48 Prosthetic 128 ENDOSKELETAL Trulife Adapters (continued) Product Limit Material Height Adapter, 101 mm (4 ) 143 g 300 lbs Titanium P16108 Height Adapter, 178 mm (7 ) 184 g 300 lbs Aluminum P prong Male Non-Rotatable with laminating dummy 3-prong Male Non-Rotatable with 5 /16 hole for valve and laminating dummy 115 g 300 lbs 115 g 300 lbs SCA266 P prong Male Rotatable Lamination adapter 198 g 300 lbs SCA236 3-prong Lamination Base only 107 g 300 lbs SCA237 3-prong Rotatable Pyramid Insert 91 g 300 lbs SCA prong Female Rotatable Lamination adapter 197 g 300 lbs SCA235 3-prong Rotatable Female Receiver Insert 55 g 300 lbs SCA Hole Round Pyramid Receiver 150 g 300 lbs P g 300 lbs Titanium P Hole Rotatable Male Pyramid 98 g 300 lbs Titanium P Hole Solid Pyramid 76 g 300 lbs SCA lbs Titanium SCA218-HD SPS x3 Fax:

49 ENDOSKELETAL Prosthetic 129 Trulife Adapters (continued) Product Limit Material 4-Hole Pyramid with 3 /8 hole for pin 71 g 300 lbs Titanium SCA210 4-Hole Pyramid with out hole 76 g 300 lbs Titanium SCA218 Double Offset 5 mm 4-Hole Adapter 79 g 300 lbs Titanium P15141 Single Offset 7 mm 4-Hole Adapter 82 g 300 lbs Titanium P Hole Pyramid Adapter with hole 133 g 250 lbs P15045 Standard 2 1 /2 Laminating Block 326 g 300 lbs 2 1 /2 Concave Laminating Block 275 g 300 lbs Nylon/ Rigid Foam Nylon/ Rigid Foam SLB210 SLB220 Lo-Profile 1 1 /4 Concave Laminating Block 135 g 300 lbs Nylon/ Rigid Foam SLB230 Round 4-Hole Mounting Plate 49 g 300 lbs Nylon SSA230 International x3 Fax: estore.spsco.com

50 Prosthetic 130 ENDOSKELETAL WillowWood - Magnum Heavy Duty System Offers heavy or active amputees a complete socket-to-foot solution designed for user weight limit up to 350 lbs Available Foot Colors: Buff (B), Medium Brown (M), and Tan (T) Heel Heights: L, 10 mm ( 3 /8 ); M, 18 mm ( 3 /4 ) (Mens only) Guide for Selecting Toe Resistance To select proper toe resistance, use the amputee s actual body weight plus loads normally or routinely carried and use the chart below. Actual body weight plus loads carried must not exceed 350 lbs (160 kg). With Titanium Laminating Adapter Includes: Magnum HD Titanium Laminating Pyramid Adapter Magnum HD Titanium 30 mm Adapters (2) Magnum HD 30 mm Composite Tube, 400 mm Magnum HD 30 mm Composite Tube Inserts (2) Magnum HD Foot MHD-100 With Laminated Socket Attachment Block and Titanium 4-Hole Adapter Includes: Magnum HD Laminated Socket Attachment Block Magnum HD Titanium 4-Hole Pyramid Adapter Magnum HD Titanium 30 mm Adapters (2) Magnum HD 30 mm Composite Tube, 400 mm Magnum HD 30 mm Composite Tube Inserts (2) Magnum HD Foot With Titanium Suction Pyramid Adapter Suspension Includes: Magnum HD Laminated Socket Attachment Block Magnum HD Suction Pyramid Adapter Magnum HD Titanium 30 mm Adapters (2) Magnum HD 30 mm Composite Tube, 400 mm Magnum HD 30 mm Composite Tube Inserts (2) Magnum HD Foot MHD-200 Ordering Example Mens MHDM Womens MHDW Size Side (L/R)...L Color (B/M/T)...B Toe Resistance...6 Heel Height...L MHDM-26LB-6L MHD-300 Magnum Tube Cutting Guide 700-TL003 Toe Resistance Guidelines Foot Size Low (6) Regular (7) High (8) Men cm Women cm lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg SPS x3 Fax:

51 ENDOSKELETAL Prosthetic 131 WillowWood Components Magnum Titanium Laminating Pyramid Adapter Provides one step lamination into a transtibial socket Includes carbon tape, pre-installed Limit: 350 lbs/150 kg (300 lbs/135 kg for level 4) MHD-PA-L Magnum Titanium 30 mm Adapter Shorter than other adapters to provide more clamping force for heavy duty applications Limit: 350 lbs/160 kg (300 lbs/135 kg for Level 4) Magnum 30 mm Composite Tube Can be cut to length using a Magnum Tube cutting guide Includes two inserts Limit: 350 lbs/160 kg (300 lbs/135 kg for Level 4) Magnum 30 mm Composite Tube Insert Provides extra security and strength (use at each end of the tube) Limit: 350 lbs/160 kg (300 lbs/135 kg for Level 4) MHD-002 MHD-30CT MHD-30CTI Magnum Titanium Rotatable Slide Adapter Magnum Titanium Slide Adapter (non-rotatable) Provides rotation and medial/lateral or anterior/posterior slide for heavy/active patients; Up to 1 /2 (13 mm) slide capability, 360 rotation (MHD only) Limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) MHD MHD Magnum Suction Pyramid Recommended suspension product for laminated sockets Limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) MHD-SP4 Magnum Titanium 4-Hole Adapter Strong attachment for a socket with a distal 4-Hole pattern Limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) MHD-PA-4 Magnum Socket Attachment Block Provides a 4-Hole pattern attachment point in laminated sockets Limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) Magnum Titanium 4-Hole Pyramid Receiver Use on socket s distal end with 4-Hole pattern Limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) MHD-PR-4 Foundation Components Torsion Adapter 50 rotation to accommodate toe in/toe out Reduces stress on tissue and allows more natural FND-TA movement Limit: 220 lbs 4-Hole Offset Plate 12 mm Aluminum FND International x3 Fax: estore.spsco.com

52 Prosthetic 132 ENDOSKELETAL WillowWood Components (continued) Titanium Foot Adapter Lightweight pyramid adapter used with most manufacturer s feet Limit: 350 lbs (160 kg) 2LTC-1208 Aluminum 30 mm Adapter CNC machined, aircraft grade aluminum 30 mm adapter is shorter than other adapters, requiring less clearance, 86 g Limit: 250 lbs (115 kg) FND Titanium 30 mm Adapter CNC machined, Titanium 30 mm adapter is shorter than other adapters, requiring less clearance, 100 g Limit: 250 lbs (115 kg) FND Titanium Dual Pyramid Limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) 32 mm 45 mm 60 mm 75 mm 4-Hole Titanium Pyramid Receiver The non-rotatable 4-Hole titanium pyramid receiver attaches to any socket or knee with a distal 4-Hole pattern Attachment screws not included Limit: 250 lbs (115 kg) Titanium 4-Hole Rotatable Pyramid Receiver Strong attachment for a socket with a distal 4-Hole pattern Limit: 250 lbs (115 kg) 360 rotation 4-Hole Titanium Pyramid Adapter The non-rotatable 4-Hole titanium pyramid adapter attaches to any socket or knee with a distal 4-Hole pattern Attachment screws not included Limit: 250 lbs (115 kg) FND FND FND FND FND FND FND Titanium 4-Hole Rotatable Pyramid Adapter 360 of rotation are supplied with the use of a locking groove design in this lightweight titanium adapter Attachment screws and spacer plate included Limit: 250 lbs (115 kg) Titanium 4-Hole Pyramid Adapter, 20 mm Offset Attaches to any socket or knee with distal 4-Hole pattern Offset 20 mm anterior/posterior or medial/lateral from the center Limit: 250 lbs (115 kg) Composite 4-Hole Pyramid Adapter, 10 mm Offset Attaches to any socket or knee accepting a standard 4-Hole configuration Offset 10 mm from center, 71 g Screws not included Limit: 250 lbs FND FND FND SPS x3 Fax:

53 ENDOSKELETAL Prosthetic 133 WillowWood Components (continued) Composite Laminating Pyramid Adapter Designed to be laminated into a transtibial (BK) socket Made from lightweight composites and titanium Provided with carbon tape, pre-installed, 84 g Limit: 250 lbs/115 kg Aluminum Laminating Pyramid Adapter Classic, time tested design that is machined from aircraft grade aluminum, 94 g Limit: 250 lbs/115 kg levels 1-2, 220 lbs/100 kg levels 3-4 FND FND Slide Adapter, Aluminum 4-Hole Pyramid Provides either M/L or A/P slide up to 1 /2 (13 mm) Limit: 250 lbs/115 kg) Aluminum Rotating Slide Adapter Provides rotation and medial/lateral or anterior/posterior slide Up to 1 /2 (13 mm) slide and 360 rotation available Screws included Limit: 250 lbs/115 kg Angle Offset Plate Provides 5 angular offset in medial/lateral or anterior/posterior orientation Screws included Limit: 250 lbs 250 lbs/115 kg 4-Hole Adapter 3 /8 Spacer Plate Measures 2 x 2, and is 3 /8 (9.5 mm) thick Screws included Limit: 250 lbs/115 kg FND FND FND Green 4-Hole Adapter 1 /8 Spacer Plate Limit: 250 lbs/115 kg 2 x 2 screws included Laminated Socket Attachment Block Without rigid foam, 67 g Provides a 4-Hole pattern attachment point in laminated sockets limit: 350 lbs/160 kg (300 lbs/135 kg for level 4) Laminated Socket Attachment Block With rigid foam, 124 g limit: 350 lbs/160 kg Titanium Threaded Rotatable Pyramid Insert Limit: 250 lbs/115 kg For use with FND and FND FND Titanium Threaded Rotatable Pyramid Receiver Insert For use with stainless steel AK rotatable 3-prong base (FND ) Can be threaded into base of titanium 4-Hole rotatable components (FND and FND ) Limit: 250 lbs/115 kg FND International x3 Fax: estore.spsco.com

54 Prosthetic 134 ENDOSKELETAL WillowWood Components (continued) AK Rotatable 3-Prong Base Use for attaching directly to the GeoLite Knee, threaded rotatable pyramid insert (FND ) or pyramid receiver (FND ) Limit: 250 lbs/115 kg FND AK Rotatable Pyramid Adapter 360º rotation Limit: 250 lbs/115 kg FND AK Rotatable Pyramid Receiver 360º rotation Limit: 250 lbs/115 kg FND Alpha Suction Pro Alpha Suction Pro with Titanium Pyramid Provides suction suspension in either thermoplastic or laminated sockets; includes air expulsion valve Limit: 250 lbs/115 kg 700-SP SP101 Earthwalk2 Late stop allows for easy roll-over so foot can maintain foot flat longer, this action is important for less active amputees who require more stability and less dynamic response; 185g weight, 250 lb weight limit Multi-axial function; enjoy the freedom of movement through inversion and eversion, internal and external rotation, plantar and dorsiflexion; Requires a foot bolt Earthwalk2 Ankle Only Amputee Ankle Selection Less than 150 lbs (70 kg) Red EWA2-R lbs (71-80 kg) Blue EWA2-B lbs ( kg) Yellow EWA2-Y lbs ( kg) Green EWA2-G Impulse Ankle Multiaxial ankle with restricted dorsiflexion allows for more foot response 4 ankle stiffnesses with aluminum base and 2 ankle stiffnesses with titanium base; 350 lb weight limit Adjusted Body Ankle Selection Less than 150 lbs (68 kg) Red IMPA-R lbs (69-86 kg) Blue IMPA-B lbs ( kg) Yellow IMPA-Y lbs ( kg) Green IMPA-G Titanium Base lbs ( kg) Black IMPA-K lbs ( kg) White IMPA-W Notes: Adjusted Body is the amputee s body weight plus any loads carried normally or routinely by the amputee. The weight limit for the Impulse Foot and the Impulse Ankle is 350 lbs (135 kg) for Level 4 amputees. The Impulse Symes Foot is rated to 250 lbs (115 kg). SPS x3 Fax: