I/O Audio Ch. Max Resolution. H x720 2-way - Yes Yes Yes - Yes

Transcription

1 Dahua Device Name HCVR5104H Tested Firmware Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support x720 2-way - Yes Yes Yes - Yes Remarks Note 1.The bit-rate values in the combo box are not all valid, users have to choose a valid one (the range can be get from the web of the device) while setting. (NUUO Server limitation) 2.The auto detection and the UPnP searching are not supported. (Camera firmware issue) 3.The audio-in is for annel 1 only. (Camera firmware issue) 4.The PCM audio format is not supported. (Camera firmware issue) 5.The talk function is not supported. (Camera firmware issue) 6.The move and auto-pan functions of PTZ are not supported. (Camera firmware issue) 7.After doing focus-near or focus-far, it will do autofocus immediately. (Camera firmware issue) 8.The auto-focus is not supported because it is not supported by the Dahua CGI API. (Camera firmware issue) 9.The motion detection is not supported. (Camera firmware issue) 10.In some cases (lower FPS), setting the video configuration will fail, even the bit-rate is fit. (Camera firmware issue) IPC-HFW MJPEG x way 2/1 - Yes Yes - Yes Note IPC-HD2100 Note 1. Sometime parameter dialog will fail to get codec parameter with high bitrate. (Camera performance limitation) 2. The range of parameter on camera will change by other parameter, our parameter dialog can't synchornize with camera. (Camera firmware issue) 3. Slow reaction when motion dectection is triggered. (Camera performance limitation) 4. Polling the DI/Motion status will make the audio stutter (Camera performance limitation) T, build : H264 MJPEG x Yes Yes - Yes 1. The range of bitrate and framerate does not synchronous with the camera's website which may result in failure of stream parameter setting. 2. If enable MD and used MJPEG as stream codec which could result in video freeze then start play after few seconds. IPC-HFW3200C T, build : H264 MJPEG x way 2/1 - Yes Yes - Yes Note 1. The range of bitrate and framerate does not synchronous with the camera's website which may result in failure of stream parameter setting. 2. If enable MD and used MJPEG as stream codec which could result in video freeze then start play after few seconds. 3. There is big noise in audio with format PCM. 4. There is discontinuous audio with format G.711Mu and G.711A. IPC-HDB3101 Refer to IPC- HFW3101C (FW V2.103) H264 MJPEG x way*2 2/1 - *2 *2 - - Note FW issue: bit rate range is different between camera web and response to cgi

2 Dahua Device Name IPC-HDBW3101 Tested Firmware Refer to IPC- HFW3101C (FW V2.103) Format H264 MJPEG - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution x960 I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support Remarks 2- way*2 2/1 - *2 *2 - - IPC-HDB3300 Refer to IPC- HF x way 1/1 Yes IPC-HDBW3300 IPC-HF3110 IPC-HF3211 IPC-HF R,Build R,Build R,Build R,Build IPC-HFW3101C V2.103 IPC-HFW5302C H264 MJPEG MJPEG x way 2/1 Yes M 2-way 1/1 Yes x way 2/1 Yes x way 1/1 Yes x way*2 2/1 - *2 *2 - - Note SD6366E-HN Note SD32203S-HN 1. The range of parameter on camera will change by other parameter, parameter setting in VMS can t synchronize with camera.(camera firmware issue) 2. When framerate set to 1 and record dynamic picture, the picture's framerate may rise to 30 immediately. (Camera firmware issue) 3. parameter setting and rotate function may result in failure by Day/Night profile. (Camera firmware issue) 4. Sometime parameter dialog will fail to get parameters with high resolution, framerate, and bitrate. (Camera performance limitation) 5. Zoom in/out will not run step by step, it will zoom to limit directly. (Camera firmware issue) 6. DO can not trigger. (Camera firmware issue) 7. PTZ only support zoom & focus R, build : x576 2-way *2 Yes Yes *2 - Yes 1.There is no guarantee that the bitrate values in the combo box is valid. User should apply a value in the valid C14range (can be get from the web page of the camera) so that the setting can be applied successfully. 2.FW Issue: the Dahua CGI API dose not support the autofocus command though the camera has the function of autofocus.

3 Dahua Device Name SD40212S-HN SD42212S-HN SD42C212S-HN SD50120S-HN SD50220S-HN SD50230S-HN SD52C120S-HN HN Tested Firmware R.A.2017, build : Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support Remarks

4 Dahua Device Name Note: SD52C230S-HN SD59120S-HN SD59212S-HN SD59220S-HN SD59230S-HN SD63120S-HN SD6C120S-HN Tested Firmware Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support Remarks 1. The range of parameter on camera will change by other parameter, parameter setting in VMS can t synchronize with camera.(camera firmware issue) 2. The camera can't be search by auto detection function and UPNP tool. (Camera firmware issue) 3. When framerate set to 1 and record dynamic picture, the picture's framerate may rise to 30 immediately. (Camera firmware issue) 4. parameter setting and rotate function may result in failure by Day/Night profile. (Camera firmware issue) 5. Sometime parameter dialog will fail to get parameters with high resolution, framerate, and bitrate. (Camera performance limitation) 6. The setting may fail when setting format from MJPEG to. (Camera firmware issue) 7. Audio and talk functions will fail with codec PCM. (Camera firmware issue)

5 Dahua Device Name SD6C220S-HN SD6C230S-HN SD63220S-HN SD63230S-HN SDZW2030S-HN SD65XX-HN Tested Firmware Format D - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support x way 7/2 Yes Yes Remarks Note: 1.MJPEG not support MD 2.FW issue, MJPEG bitrate can't not set over FW/HW issue, liveview may not change after setting videoparameter. SD69XX-HN x way 7/2 Yes Yes Note: 1.MJPEG not support MD 2.FW issue, MJPEG bitrate can't not set over FW/HW issue, liveview may not change after setting videoparameter. SD6A MJPEG x way 7/2 Yes Yes *2 - Yes

6 Dahua Device Name Note: IPC-HF5100 IPC-HF5200 IPC-HFW5100D Tested Firmware Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support 1. The permitted parameter list on camera will be changed by other parameters, our parameter dialog can't synchornize with camera. (Camera firmware issue) 2. The camera can't be searched by UPnP tools. (Camera firmware issue) 3. Slow reaction when motion dectection is triggered. (Camera performance limitation) 4. Big audio noise with PCM. (Camera firmware issue) 5. CGI response "support flip/mirror", but actually not. (Camera firmware issue) 6. Polling the DI/Motion status will make the audio stutter. (Camera performance limitation) Remarks IPC-HFW5200D IPC-HFW5100- IRA IPC-HFW5200- IRA IPC-HFW5100C IPC-HFW5200C

7 Dahua Device Name IPC-HFW5300C Tested Firmware Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support Remarks IPC-HFW5202C IPC-HFW5100E- VF IPC-HFW5200E- VF IPC-HFW5300E- VF IPC-HFW5200E- Z IPC-HFW5300E- Z IPC-HDBW5100 IPC-HDBW5200

8 Dahua Device Name IPC-HDBW5300 IPC-HDBW5202 Tested Firmware Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support Remarks IPC-HDBW5302 IPC- HDBW5100-DI IPC- HDBW5200-DI IPC- HDBW5300-DI IPC- HDBW5202-DI IPC- HDBW5302-DI IPC-HDB5100

9 Dahua Device Name IPC-HDB5200 Tested Firmware Format - : not avaliable on camera *1: not avaliable on software *2: not test on software For multi stream support: Yes: multi stream fix to 500kbps/100kbps Yes*: multi stream setting support Max Resolution I/O Audio PTZ On- Edge Motion UPnP Auto Pan Multi Stream Support Remarks IPC-HDB5300 IPC-HDB5202 IPC-HDB5302 IPC-HDB5100- DI IPC-HDB5200- DI IPC-HDB5300- DI IPC-HDB5202- DI IPC-HDB5302- DI

10

11

12

13

14

15

16

17

18