Release Notes. June, Note In case of discrepancy, the information in this document supersedes the information in any document referenced herein.

Transcription

1 Release Notes VideoEdge Hybrid Appliance Applicable Software VideoEdge Hybrid Appliance V4.5.0 ( ) Product Data Visit the Network Video Recorders section of our web site to download datasheets and other documentation in PDF format. June, 2014 Note In case of discrepancy, the information in this document supersedes the information in any document referenced herein A0

2 Table of Contents Table of Contents... 2 What s in This Release... 4 VideoEdge Appliance Recorder V4.5.0 New Features... 4 New OEM Installer... 4 New Simplified Install Wizard... 4 New Admin Look & Feel... 4 Auto Camera Discovery... 4 Security Hardening... 4 New Analytics... 6 Device Replacement... 6 Push Updates... 6 ONVIF Camera Handler... 7 VideoEdge Client Enhancements... 7 VideoEdge NVR Patch Enhancements (From version 4.4 patch 2)... 7 Archiving for Hybrids... 8 Failover for Hybrids... 8 Software License Upgrades... 8 VideoEdge Client Performance... 9 Known Limitations and Issues VideoEdge Appliance VideoEdge Client Cameras Supported American Dynamics ACTi Corporation Arecont Vision AXIS Communications Bosch CBC Dahua FLIR Panasonic Corp Pelco Samsung SONY Vivotek Corp Appendix A

3 Dry contact Alarm Recording Camera Recording Camera Start Recording Camera Stop Recording Camera Start Recording Camera Stop Recording Contact Information

4 What s in This Release The following features and enhancements are part of this release. VideoEdge Appliance Recorder V4.5.0 New Features VideoEdge NVR Software All Appliance Platforms can be updated to the latest VideoEdge V4.5 recorder software. Appliance systems that are at 4.3 must be upgraded in sequence i.e. NVR 4.3 to NVR 4,4 release. Any Appliance 4.4 system can be upgraded to the NVR 4.5 release. Note: In order to avoid serious data loss or corruption, it is imperative that a UPS is deployed on systems utilizing RAID cards without a battery backup. The UPS should provide a minimum of 2 minutes of power to allow a managed shutdown. This VideoEdge NVR V4.5 release has the following new features and enhancements. New OEM Installer A new OEM installer (NVR_OEM_Installer x86_64.raw ) is now available. The installer replaces the existing Live Installer and requires no use of YaST (i.e. less manual steps) to install the NVR. Note: this file needs to be placed on a USB thumb drive using an appropriate third party program. New Simplified Install Wizard Along with the new OEM installer, the actual setup wizard has been streamed to allow the user to configure the system in fewer steps. New Admin Look & Feel The WEB admin has been updated with new color scheme and new icons. Note: WEB Admin only supported with the Linux embedded FireFox or remotely using Microsoft Internet Explorer versions 9 & 10 Auto Camera Discovery A new auto discovery feature is now supported which allows cameras to be discovered on the network faster and with less steps. This feature uses standard network discovery protocols that simplify the setup of cameras on the NVR. All AD cameras and Axis cameras can use this feature. Other camera manufactures may not support these standard discovery protocols. For those cameras, the existing NVR 4.4 discovery functionality (Scan Devices) has been included within the NVR. Security Hardening Address a number OS vulnerabilities to become FISMA ready Enhance user login/logout facility Enhance Auditing and Logging for user account lockout Enhance user control experience for remote Access for XRDP and VNC Remove root user account for SSH login Enhance user experience for Security Configuration 4

5 Provide Web access communication options to easily select: HTTP and HTTPS or HTTPS only Create self-sign certificates Create Certificate Signing Request Install Signed Certificate Supports HTTPS connection with various brand of cameras o User can configure 3 Security Group in the Security page under Devices- Low (HTTP/Basic) or Default, Medium (HTTP/Digest) and High (HTTPS/SSLv3). Once these Security Group configured, the user have the option to choose the level of security (if supported) they preferred when adding their camera to the NVR or Hybrid and it should be noted that user will needs to enabled the HTTPS feature on their camera before adding to NVR or Hybrid. Table below shows the Security Group which each handler supports: Handlers Low (HTTP/Basic) or Default Medium (HTTP/Digest) High (HTTPS/SSLv3) AD 8 Channel Encoder Yes No No AD VideoEdge IP Cameras Yes No No AD Illustra iapi1 Yes No Yes AD IP SpeedDomes N/A N/A N/A AD Illustra iapi2 Yes No Yes AD Illustra iapi3 Yes Yes Yes AD Illustra Flex Yes No No ACTi Corporation Cameras Yes No No Axis Cameras Yes No Yes Arecont Vision Cameras Yes No No Arecont Vision- CBC Yes No No Bosch Camera Yes No No Dahua Cameras Yes No No Flir Yes No No Panasonic Cameras Yes No No Pelco Cameras Yes No No Samsung Cameras Yes No No Sony Cameras Yes No Yes Vivotek Cameras Yes No Yes 5

6 Enhance NVR encryption ciphers New Analytics Dwell Person must be mostly stationary within the ROI for the predetermined amount of time and % overlap. Example: Retail customer interacting with a specific product in a display or endcap. ROI is usually smaller and more defined. Linger Person must remain within the ROI for the predetermined amount of time and % overlap, but unlike Dwell, the person can move around within the ROI. Example: Teenagers loitering outside of a gas station or hanging out in a particular area. ROI is usually larger, giving more room to move about. Heat maps A graphical representation where various levels of motion or activity are displayed as different colors overlaying a still video image. Dark Blue indicates no motion. Dark Red indicates high motion. Gradient colors in between to depict generalized motion. Device Replacement Through victor, the capability has been added to replace cameras easily. NVR server now has the capable of changing the IP address on existing camera rather than forcing the camera to be removed and re-added. Push Updates With NVR 4.4, the ability was added through victor/ VE Client to perform push upgrades of NVR software via the victor Client. This functionality has been enhanced in NVR version 4.5 to include individual camera handler push updates going forward. To update individual Camera Handlers the Handler.exe package must be downloaded and placed in a folder named Repository inside the Tyco\Update Server repository directory on the Site Manager s workstation. It may be necessary to create the Repository folder if it does not already exist. The camera handler executables will require to be extracted (double click to execute) prior to making them available for installation. The installation process can be initialized either by running the Tyco Update Utility tool located in the System tray (Image 1) and selecting Tools\ Repository packages (image 2 and 3) or alternatively the user can choose to right click on the NVR Icon in the victor Client Device list and select Check for Updates (image 4). (Image 1) (Image 2) 6

7 (Image 3) (Image 4) The Tyco update Utility will provide a choice of pick and choose which handler to install while the check for updates option will install all available handlers located in the Repository folder. The update process will stop and restart services as each individual handler is installed. Update process can be monitored through the victor Client Activity Window or from the System\Update Software page of the NVR. The information under Upload packages will change as each package completes, retaining the last package uploaded information. As each Handler is installed successfully the Device handler version number for the device selected to update will change to reflect the update. ONVIF Camera Handler An ONVIF (version 2.2) Profile S compliant camera handler is included in the VideoEdge NVR software so that any ONVIF compliant camera can be added to the system. VideoEdge Client Enhancements The following enhancements have been added to the VideoEdge (local) Client: Right-click in video pane to revert a single pane to LIVE Automatically open of control bar if user selects video for playback Double-click in video pane displays camera in 1x1 Switching between layouts retains previous cameras Ability to retrieve snapshot in live mode Clear all events link VideoEdge NVR Patch Enhancements (From version 4.4 patch 2) The NVR Patch enhancements are included with the NVR 4.5 release New SUSE Kernel update to SUSE Version 11 SP3. Support for the next release of the VideoEdge Appliances (i.e. new CPU motherboards). Analog inputs on the VideoEdge Hybrid Appliances are now included when a template is created. USB clip export finish message now works properly on VideoEdge Client. Dry contact update to allow the duration of the dry contact to be recorded, not just the event. (See Appendix A for details). Enhanced alert capability to generate alerts under certain conditions: Audio Recording Failure If audio is enabled and if the system detects that an audio stream is not being recorded, an Audio Recording Failure alert begun message will be generated and when audio recording is restored, another message stating Audio Recording Failure alert end will be generated. Camera Video Loss The system will continually monitor the health of all video streams. A Video Loss alert begun message will be generated upon loss of any video stream and 7

8 when the video is restored another message stating Video Loss alert end will be generated. Video Stream Loss The system will continually monitor the health of all video streams. A Video Stream Loss alert begun message will be generated upon loss of any video stream and when the video stream is restored another message stating Video Stream Loss alert end will be generated. Video Recording Failure If the system detects that a video stream is not being recorded, a Video Recording Failure alert begun message will be generated and when video recording is restored, another message stating Video Recording Failure alert end will be generated. Reboot VideoEdge NVR If a VideoEdge NVR unit reboots or overheats this will be detected and will be conveyed to the user in the form of an event. This event will be visible in both VE Client and in victor. There are some limitations: Archiving for Hybrids This feature adds an additional load on system resources. It is recommended that when using archiving for any supported hardware platform (e.g. VEH desktop, 2U, 3U), the support bitrate for storage set (currently at 100 Mbps) for system will be reduced to half. This best practice rule applies regardless of the number of cameras or bitrate for archiving. Also, Archiving feature and Failover feature are not currently supported together. Note: The VideoEdge Client does not support Archiving. If archiving is being used, then the VideoEdge Client should not be used. Failover for Hybrids The Hybrid systems can make use of the failover functionality with the following limitations: Dry contact alarms for analog inputs do not alarm on a secondary recorder's VideoEdge Client when failed over. Analog PTZ cameras do not work on active secondary failover NVR due to serial connections. Serial POS text streaming does not work on active secondary failover NVR Software License Upgrades The VideoEdge Appliance Recorders come standard with a software license that supports all analog video inputs and 4 network IP camera devices. The Hybrid, like the NVR, can be upgraded to support additional network IP camera devices by purchasing the add-on camera licenses. If an analog input is not used this channel can be used to support an additional IP camera channel until the maximum number of channels available for the VideoEdge Appliance model is reached. The max write to disk bandwidth on all platforms is 100Mbps per storage set. To achieve maximum throughput the desktops support a single storage set for a total of 100Mbps, the 2U supports two storage sets for a total of 200Mbps and the 3U supports three storage sets for a total of 300Mbps. 8

9 VideoEdge Client Performance The VideoEdge Client does have an impact on the available Appliance s system resources. The following guidelines should be observed when operating the VideoEdge Client on the Appliance hardware: Platform Aggregate Mbps w/o VideoEdge Client Aggregate Mbps w/ VideoEdge Client Max Cameras Desktop IP Hybrid Desktop analog 8-IP or 16-IP Hybrid 2U analog, 16-IP or 32 IP Hybrid 3U analog, 32-IP or 64 IP 9

10 Known Limitations and Issues The table below highlights known limitations or issues against the V4.5 VideoEdge Appliance and the V4.5 VideoEdge Client. Known limitations and issues may exist from previous releases. Please refer to the specific release for the appropriate information as well as the V4.5 VideoEdge release notes. VideoEdge Appliance VideoEdge Appliance Description When a camera resolution is lowered from D1 to QCIF, the clarity of the OSD text decreases correspondingly. For analog cameras, you cannot directly configure a stream to be greater than 12 FPS or 2CIF resolution. When changing the OSD font for analog cameras from ASCII to ASCII small when three or more items are already present, distortion may occur. This can manifest as the repeating of an OSD item multiple times down the screen. Changing the time on the VE Appliance could cause cameras to go offline and no video can be viewed from them. When using a KVM, the Linux standard GUI may not be displayed upon boot up and then show only a command prompt. Some combinations of OSD text and backgrounds colors can cause the OSD text for analog cameras to distort. VideoEdge Client - update of ptz preset setting is delayed in video pane display VE Appliance - Inconsistent dwell times when multiple tours ran on local analog spot monitor Panasonic WC CS385 - G726 doesn't play audio NVR 4.4 Bitrate changes i600 Minidome - when lowering quality of CVBR reports bitrate error on web GUI page Suggested Work-Around For best results, use OSD with a camera resolution of D1, a lower transparency, and an appropriate high contrast color. Set both streams to, 12 fps and 2CIF and click apply. After clicking apply, configure one of the streams to have a resolution greater than 2CIF and an FPS of greater than 12. When changing the OSD font for analog cameras, proceed to remove the OSD item and then re-enter them using the desired character settings. Restart the recorder. Press <Ctrl><Alt><F2> to access the command line prompt #. Proceed to edit the config file /etc/x11/xorg.conf. Under the Monitor section, lower the upper rant VertRefresh parameter to a lower value (if it is 85, then change it to 75 or 60). Save the file and then reboot the recorder. Decrease the transparency for the background to improve the contrast on the OSD text for analog cameras. Workaround is to wait until VideoEdge Client does an update done in ~ 30 seconds. Workaround is to only have a single tour included with a fixed view to either spot monitor(s) or VideoEdge Client. No known workaround. G726 audio codec not supported Ignore the error, move off the page and return and the lower rate bitrate will be set 10

11 VideoEdge Appliance Description If you mount a Windows 7 share using Samba/CIFS you may run into mount error(12): Cannot allocate memory if you are using very large files on the Windows machine. Suggested Work-Around Refer to Microsoft technical details: Large Files are locking up Windows 7 32 bit and 64 bit. The solution is to make two registry edits and then restart a service: 1. Set HKLM\SYSTEM\CurrentControlSet\Control\Ses sion Manager\Memory Management\LargeSystemCache to Set HKLM\SYSTEM\CurrentControlSet\Services\La nmanserver\parameters\size to Restart the server service Pressing the menu icon in the PTZ controls for an Optima dome via VideoEdge Client or victor causes loss of PTZ functionality. PTZ communication can sometimes fail when using the SensorNet Module (ADACSNETHAD) to control dome cameras with the VE Appliance. New AD485 protocol handler required for simplex wired domes such as the Optima LT Bosch AutoDome camera Ctrl: Clicking on the auto focus or auto iris causes the camera to Max Zoom Factory Recovery of VE Appliance with the ADACSNETH module connected sometimes stops the machine recovering correctly Analog Camera RS422 protocol does not allow program/calling presets-patterns Auto Iris for SDU1-2 &3-5 Keyboard Control: Camera action continues on camera switch after joystick released Text Stream: on-board USB port numbers changing when plugging in an RS485- USB device Limitation: Archive Storage require single CIF Folder for each NVR archiving Restart the Camera if the menu button pressed and PTZ control lost. Additional functionality has been added to this release to allow the menu button to be removed from the onscreen dome controls. An Enable Camera Menu checkbox has been added to the PTZ page. NOTE: This will only be displayed when the PTZ Port is RS-422 & the protocol for the port has been set to be AD4xx.. Use to this turn off the menu button for all optima domes. The default is enabled. Reboot the Sensornet Module by unplugging and replugging the USB lead. To enhance the dome communications of a simplex (2- Wire) connected dome (e.g. Optima LT Dome), a Simplex Optima LT checkbox has been added to the PTZ page. NOTE: This will only be displayed when the PTZ Port is RS-422 & the protocol for the port has been set to be AD4xx. Camera firmware issue. No known workaround. Remove the module before starting the factory recovery process. Sensornet camera protocol allow program/calling presets-patterns Auto Iris for SDU1-2 &3-5 Workaround is to call the camera again to that monitor Default Linux behavior, connecting a RS485 USB device will call USB port numbers to change. Workaround reconfigure ports after device is added. Recommend best practice using a separate folder for each NVR. This will also allow best performance for archiving and media culling. 11

12 VideoEdge Appliance Description Cameras that have been archiving, when deleted are no longer accessible through the device list. Auto discovery does not support IP address change if the cameras are on different physical LANs then the NVR NVR unable to resolve when added by Host name. VENVR: Device Replacement: Device replacement does not occur when password has been changed on camera VENVR: Device Replacement: Dry contacts do not stay enabled after device replacement victor is reporting 'Raid Degradation' on a unit which does not have a RAID card If a camera has its audio association still added to the device list it cannot be rediscovered (if the IP has been changed and the camera is now a different IP) Using Pelco D protocol to control an SDU8 dome does not work VENVR Appliance > Restarting the Video Driver service on the NVR created a Video Loss Alert victor 4.5 Recorder push update attempt from V4.4 reported a success but failed to update to 4.5. Push updates only work from V4.4 Patch 2 and NOT V4.4 release. Suggested Work-Around Deleted archive cameras accessible through victor Vault Workaround is to have the cameras on the same physical LAN as the NVR, Workaround is to add the NVR by its IP address in victor. This insures the failover, text streaming and unit notification work properly. Replacing cameras only work if the camera is set to the default password. After replacing a device, check all settings on the device such dry contacts to insure the device is set to work properly. No known workaround. The alarm does indicate a storage issue. Workaround is to delete the camera's video & audio from the device-list & audio-list after changing the camera's IP address. Workaround is to use the Pelco P protocol with SDU8 domes. On occasion when changing camera configuration a video alert maybe generated followed by a video normal alert. This is expected behaviour. Workaround for V4.4 is to use the Software Update page of the NVR Web GUI. 12

13 VideoEdge Client VideoEdge Client Description VideoEdge Client: Only uncompressed audio work VideoEdge Client: 4.3- Audio: Audio in live view on the VE Client, is not always accurately synchronised with the video. VideoEdge Client > Surveillance screen > Set pattern > There is iris controls in the set pattern controls for the VE Client GUI Interface They perform no function. SDU1 & SDU2 pressing flip button causes camera control to lock up for a few seconds VideoEdge Client: Wrong camera triggers dry contact event if initial camera is deactivated VE-Appliance: PTZ: Removing a Preset or Sequence does not prompt user that a Preset or Sequence is being removed. VE-Appliance: : ADTTE: ADTTE expected functionality is to see the Camera ID # being displayed once called, fails if 2 ports are configured for ADTTE VENVR - Backup Restore of VideoEdge Settings - not all settings are being restored as expected VideoEdge Client - does not retain tour on screen when the layout is changed VideoEdge Client - RTSP Port set to value other than 554 causes video not to stream when client's preference are set to AutoStart and AutoLogin VideoEdge Client - viewer3 cannot see camera previews in camera menu ''Video Stream Loss' is populated in VE Client when Snapshot in Discovery feature is clicked. Suggested Work-Around Only uncompressed sound files can be added No known workaround No known workaround Workaround is to insure that the check box for Enable Camera Menu on the Web Admin PTZ is set correctly for using flip functionality Dry contact slots are reallocate, Care must be taken when allocating dry contacts and creating events. Ensure that dry contacts and events are allocated correctly No known workaround. Ensure that the only port which is enabled with ADTTE is the port that the ADTTE is connected to. Workaround is to restart the VideoEdge Client A tour must be dragged into the layout Workaround is to log out of velocalclient and login again. No known workaround No known workaround 13

14 Cameras Supported American Dynamics Supported American Dynamics cameras: Model CODEC Supported Audio I/O PTZ Supported Edge Based Motion Detection Supported Edge Motion Detection Metadata VideoEdge Versions Supported Certification ADEIP8H ADEIP8M Video Encoders, Yes 16/ 0 Yes 16/ 0 Yes No No Tested & Yes No No Tested & Box Cameras ADCIPEBPN, ADCIPEBPPE ADCIPEBPPU ADCIPEBN ADCIPEBPE ADCIPEBPU,,,,, ADCIPE3312IC N ADCIPE3312IS N Indoor Mini Dome Cameras,, ADCIPE3312IC PE ADCIPE3312IS PE ADCIPE3312IC PU ADCIPE3312IS PU,,,, ADCIPE3712O CN ADCIPE3712O SN Outdoor Mini Dome Cameras,, 14

15 ADCIPE3712O CPE ADCIPE3712 OCPU ADCIPE3712O SPU ADCIPE3712O SPE,,,, IP Dome Cameras ADVEIPSD22N, ADVEIPSD22P, ADVEIPSD35N, ADVEIPSD35P, Illustra 210 Mini Dome Cameras ADCi210-D111 ADCi210-D011 Yes 4/0 Yes No No Tested & Yes 4/0 Yes No No Tested & Yes 4/0 Yes No No Tested & Yes 4/0 Yes No No Tested & ADCi210-D121 ADCi210-D021 ADCi210-D113 ADCi210-D013 ADCi210-D123 ADCi210-D023 Yes 1/0 No Yes Yes Tested & Illustra 600 Mini Dome Cameras ADCi600-D111 ADCi600-D011 ADCi600-D121 ADCi600-D021 ADCi600-D321 ADCi600-D131 15

16 ADCi600-D031 ADCi600-D141 ADCi600-D041 ADCi600-D341 ADCi600-D113 ADCi600-D013 ADCi600-D123 ADCi600-D323 ADCi600-D133 ADCi600-D033 ADCi600-D143 ADCi600-D043 ADCi600-D343 ADCi610-D111 ADCi610-D011 Illustra 610 Mini Dome Cameras ADCi610-D121 ADCi610-D021 ADCi610-D321 ADCi610-D131 ADCi610-D031 ADCi610-D141 ADCi610-D041 ADCi610-D341 ADCi610-D113 Yes 1/0 No Yes Yes Tested & 16

17 ADCi610-D013 ADCi610-D123 ADCi610-D023 ADCi610-D323 ADCi610-D133 ADCi610-D033 ADCi610-D143 ADCi610-D043 ADCi610LT- D111 ADCi610LT- D113 ADCi600-D521 ADCi600-D541 Illustra 610LT Mini Dome Cameras No No No Yes Yes Tested & No No No Yes Yes Tested & Illustra 600 Telephoto Lens Mini Dome Cameras ADCi600-D523 ADCi600-D543 ADCi610-D521 ADCi610-D541 Illustra 610 Telephoto Lens Mini Dome Cameras ADCi610-D523 ADCi610-D543 ADCi400-D011 ADCi400-D012 ADCi400-D013 Illustra 400 WDR Indoor Mini Dome Cameras ADCi400-D014 17

18 ADCi400-D031 ADCi400-D032 ADCi400-D033 ADCi400-D034 ADCi400-D051 ADCi400-D052 ADCi400-D053 ADCi400-D054 ADCi400-D021 ADCi400-D022 Illustra 400 WDR Outdoor Mini Dome Cameras ADCi400-D023 ADCi400-D024 ADCi400-D041 ADCi400-D042 ADCi400-D043 ADCi400-D044 ADCi400-D061 ADCi400-D062 ADCi400-D063 ADCi400-D064 ADCi400-B021 ADCi400-B022 Illustra 400 WDR Bullet Cameras ADCi400-B041 18

19 ADCi400-B042 ADCi400-B061 ADCi400-B062 ADCi400-X001 ADCi400-X002 ADCi600-B021 ADCi600-B041 Illustra 400 Box Cameras Illustra 600/610 Bullet Cameras Yes 1/0 No No No Tested & Yes 1/0 No No No Tested & ADCi610-B021 Yes 1/0 No No No Tested & ADCi610-B041 ADCi600-X011 ADCi610-X011 ADCi600LT- B021 ADCi600LT- X011 ADCi625-P132 Illustra 600/610 Box Cameras Illustra 600LT Bullet Cameras Illustra 600LT Box Cameras Illustra 625 PTZ Cameras Yes 1/0 No No No Tested & Yes 1/0 No No No Tested & Yes 1/0 No No No Tested & No No No No No Tested & No No No No No Tested & No No Yes No No Tested & ADCi625-P122 ADCi625-P121 ADCi625-P124 ADCi625-P123 ADCi625-P232 ADCi625-P222 ADCi625-P221 No No Yes No No Tested & No No Yes No No Tested & No No Yes No No Tested & No No Yes No No Tested & Yes 4/0 Yes No No Tested & Yes 4/0 Yes No No Tested & Yes 4/0 Yes No No Tested & 19

20 ADCi625-P223 ADCi625-P224 Yes 4/0 Yes No No Tested & Yes 4/0 Yes No No Tested & ADCi610-M022 ADCi600-M111 ADCi610-M111 ADCi825-F311 ADCi825-F312 ADCi600F- W012 ADCi600F- X002 ADCi800F- X002 ADCi600F- B521 ADCi800F- B521 ADCi600F- D021 Illustra 610 Compact Mini-Bullet Cameras No 1/0 No Yes No Tested & Illustra 600/610 Compact Mini-Dome Cameras Illustra 825 Fisheye Cameras Illustra Flex Series Cube Illustra Flex Series Box Illustra Flex Series Bullet Illustra Flex Series Dome No No No Yes No Tested & No No No Yes No Tested & No No No Yes Yes Tested & No No No Yes Yes Tes ted & Yes 0/0 No Yes No Tested & Yes 1/0 No Yes No Tested & Yes 1/0 No Yes No Tested & Yes 1/0 No Yes No Tested & Yes 1/0 No Yes No Tested & Yes 1/0 No Yes No Tested & ADCi600F- D111 ADCi800F- D021 ADCi800F- D111 Yes 1/0 No Yes No Tested & Yes 1/0 No Yes No Tested & Yes 1/0 No Yes No Tested & Note The Illustra Flex and API3 camera handlers support Generic cameras for any unlisted models. If a camera is not in the supported list but compatible with the Illustra Flex API or API3, VideoEdge will attempt to support it as a Generic camera. Only video and audio functions are supported for Generic cameras. 20

21 ACTi Corporation This version of the VideoEdge camera handler is fully integrated with ACTi Corporation line of IP cameras. ACTi has number of API s (Application Programming Interface) camera handlers to communicate with their cameras. This version of the VideoEdge NVR is fully integrated with the ACM models (cameras using firmware version v ac) and TCM models (cameras using firmware version v ac). As ACTi continues to release new cameras to the market, the VideoEdge camera handler provides a generic camera driver that can connect to any ACM or TCM cameras not listed in the available camera list. The generic ACTi driver will gather the required information and present this to the VideoEdge NVR Supported ACTi Corporation cameras: Model CODEC Supported Audio I/O VideoEdge Versions Supported Fixed Cameras Certification ACM5611 No 1/ Works as Bullet Cameras ACM1231 No No Tested & TCM1231, H.264 No 1/ Works as TCM1511, H.264 No 1/ Works as Cube Cameras ACM4201 No 1/ Works as TCM4201, H.264 No 1/ Works as Fixed Dome Cameras ACM3401 No 1/ Works as ACM3511 No 1/ Works as ACM3701 No No Works as ACM7411 No No Works as TCM3401, H.264 No 1/ Works as TCM3411, H.264 No 1/ Works as TCM3511, H.264 No 1/ Tested & TCM7411, H.264 No 1/ Works as TCM7811, H.264 No 1/ Works as Box Cameras TCM5311, H.264 No 1/ Tested & TCM5611, H.264 No 1/ Works as Generic All other models Single () No No Works as Arecont Vision VideoEdge camera handler is fully integrated with the Arecont Vision line of megapixel cameras including full support for the 180 and 360 lines of panoramic view cameras. Arecont Vision cameras operating system (firmware) is continually evolving; please make sure your camera is running the most 21

22 current firmware available from Arecont Vision (available from As Arecont Vision continues to release new cameras, there may be instances where specific Arecont Vision cameras are not listed in the supported camera list. A generic Arecont Vision camera handler is available for these cameras. VideoEdge camera handler supports the following firmware versions: M-JPEG cameras firmware version or higher H.264/M-JPEG cameras firmware version or higher Supported Arecont Vision cameras: Model CODEC Supported Audio I/O VideoEdge Versions Supported Fixed Cameras Certification AV1115 No No Works as AV1115DN No No Works as AV1115AI No No Works as AV1125 H.264 No No Works as AV1125DN H.264 No No Works as AV1125IR No No Works as AV1300 No No Tested & AV1300DN No No Tested & AV1300AI No No Tested & AV1300M No No Tested & AV1305 No No Tested & AV1305DN No No Works as AV1305AI No No Tested & AV1310 No No Works as AV1310DN No No Works as AV1315 No No Works as AV1315DN No No Works as AV1325 No No Works as AV1325DN No No Works as AV1325IR No No Works as AV2100 No No Tested & AV2100DN No No Tested & AV2100AI No No Tested & AV2100IR No No Works as AV2100M No No Works as AV2105 No No Tested & AV2105DN No No Tested & AV2105AI No No Works as AV2110 No No Works as AV2110DN No No Works as 22

23 AV2115 No No Works as AV2115DN No No Works as AV2115AI No No Works as AV2125 No No Works as AV2125DN No No Works as AV2125IR No No Works as AV2805 No No Works as AV2805DN No No Works as AV2815 No No Works as AV2815DN No No Works as AV2825 No No Works as AV2825DN No No Works as AV2825IR No No Works as AV3100 No No Tested & AV3100DN No No Tested & AV3100AI No No Works as AV3105 No No Works as AV3105DN No No Works as AV3105AI No No Works as AV3110 No No Works as AV3110DN No No Works as AV3115 No No Works as AV3115DN No No Works as AV3115AI No No Works as AV3125 No No Works as AV3125DN No No Works as AV3125IR No No Works as AV3155 No No Tested & AV3155DN No No Tested & AV5100 No No Works as AV5100DN No No Works as AV5100AI No No Works as AV5100M No No Works as AV5105 No No Works as AV5105DN No No Works as AV5105AI No No Works as AV5110 No No Works as AV5110DN No No Works as AV5115 No No Works as AV5115DN No No Works as AV5115AI No No Works as AV5125DN No No Works as 23

24 Mini Dome Cameras AV1355 No No Tested & AV1355DN No No Tested & AV2155 No No Tested & AV2155DN No No Tested & AV5155 No No Tested & AV5155DN No No Tested & Panoramic Mini Dome Cameras AV8180 No No Tested & AV8185 No No Tested & AV8185DN No No Tested & AV8360 No No Tested & AV8365 No No Tested & AV8365DN No No Tested & AV20185DN No No Tested & AV20185CO No No Works as AV20365DN No No Works as AV20365CO No No Works as MegaVideo Box Cameras AV1115 No No Works as AV1115DN No No Works as AV1115AI No No Works as AV1300AI No No Tested & AV1300DN No No Tested & AV1305 No No Works as AV1305AI No No Works as AV1305DN No No Works as AV1310 No No Tested & AV1310DN No No Tested & AV1315 No No Works as AV1315DN No No Works as AV2100AI No No Tested & AV2100DN No No Tested & AV2105 No No Works as AV2105AI No No Works as AV2105DN No No Works as AV2110 No No Tested & AV2110DN No No Tested & AV2115 No No Works as AV2115DN No No Works as AV2115AI No No Works as AV2805DN No No Works as AV2805AI No No Works as 24

25 AV2815 No No Works as AV2815DN No No Works as AV3110 No No Tested & AV3100AI No No Tested & AV3100DN No No Tested & AV3105AI No No Works as AV3105DN No No Works as AV3115 No No Works as AV3115DN No No Works as AV3115AI No No Works as AV5100AI No No Tested & AV5100DN No No Tested & AV5105 No No Works as AV5105AI No No Works as AV5105DN No No Works as AV5110 No No Tested & AV5110DN No No Tested & AV5115 No No Works as AV5115DN No No Works as AV5115AI No No Works as AV10005 No No Tested & AV10115 No No Works as MegaDome Dome Cameras AV10255 No No Works as AV1355 No No Works as AV2155 No No Works as AV3155 No No Works as AV5155 No No Works as AV1355 No No Works as AV1355DN No No Works as AV2155DN No No Works as AV3155DN No No Works as AV5155DN No No Works as MegaView Bullet Cameras AV1325 No No Works as AV1325IR No No Works as AV1325DN No No Works as AV2825 No No Works as AV2825IR No No Works as AV2825DN No No Works as AV1125IR No No Works as AV1125DN No No Works as 25

26 AV2125IR No No Works as AV2125DN No No Works as AV3125IR W No No Works as AV3125DN No No Works as AV5125IR No No Works as AV5125DN No No Works as Generic All other models DPC* DPC* DPC* Works as Note * DPC - depends on camera capability Each of the 8xxx cameras are comprised of four individual cameras housed together as a single camera. Please make sure you have sufficient camera licenses available with your VideoEdge NVR. When adding cameras to the NVR ensure that four camera slots are available (e.g. when adding three separate cameras the first camera should be added to slot 1 (this camera will use slots 1,2,3,4), the second cameras should be added to slot 5 (it will use slots 5,6,7,8) and the third camera should be added to slot 9 (it will use 9,10,11,12), and so on. AXIS Communications The VideoEdge camera handler is fully integrated with the AXIS communications line of IP cameras and video encoders. AXIS has number of API s (Application Programming Interface) camera handlers to communicate with their cameras. The VideoEdge NVR is fully integrated with the VAPIX API Version 2 (cameras using firmware version 4.xx) and VAPIX API Version 3 (cameras using firmware version 5.xx). As AXIS continues to release new cameras to the market, the VideoEdge camera handler provides a generic AXIS camera driver that can connect to any VAPIX 2 & 3 camera. The generic driver will gather all required information, including camera name and functionality, and present it to the VideoEdge NVR. Supported Axis devices: Model CODEC Supported Audio I/O PTZ Supported Encoders Edge Motion Detection Edge Motion Detection Metadata VideoEdge Versions Certification Supported (Minimum Camera Pack Version) M7001 Yes 0/0 Yes Yes Yes Tested & Q7401 Yes 4/ Yes Yes Yes Works as Q7404 Yes 8 Yes Yes Yes Tested & Q7406 Yes 2 Yes Yes Yes Tested & Q7414 Yes 8 Yes Yes Yes Tested & 26

27 240Q, No 4/0 Yes Yes No Works as 241Q, Yes 4/0 Yes Yes No Works as 241QA, Yes 4/0 Yes Yes No Works as 241S, No 4/0 Yes Yes No Works as 241SA, Yes 4/0 Yes Yes No Works as 243Q, Yes 4/0 Yes Yes No Tested & 243SA, Yes 4/0 Yes Yes No Works as 247S, Yes 1/0 Yes Yes No Works as M7010 Yes 0/0 Yes Yes Yes Works as M7014 Yes 0/0 Yes Yes Yes Works as M7016 Yes 0/0 Yes Yes Yes Works as P7210 Yes 4 Yes Yes Yes Works as P7214 Yes 4 Yes Yes Yes Works as P7216 No 4 Yes Yes Yes Works as P7224 Yes 4 Yes Yes Yes Works as Q7411 Yes 4 Yes Yes Yes Works as Q7424-R No 4 Yes Yes Yes Works as M1011 Fixed Cameras, M1011-W, M1031-W, Yes 1/0 No Yes Yes Works as No 0/0 No Yes Yes Tested & Yes 0/0 No Yes Yes Tested & M1054 Yes 1/0 No Yes Yes Tested & M1103 No 0/0 No Yes Yes Works as M1104 No 0/0 No Yes Yes Works as M1113 No 0/0 No Yes Yes Works as 27

28 M1114 No 0/0 No Yes Yes Tested & P1311 P1343 P1343-E P1344 P1344-E P1346 P1346-E P1347 P1347-E,,,,,,,,, Yes 1/0 No Yes Yes Tested & Yes 1/0 No Yes Yes Tested & Yes 1/0 No Yes Yes Works as Yes 1/0 No Yes Yes Tested & Yes 1/0 No Yes Yes Works as Yes 1/0 No Yes Yes Tested & Yes 1/0 No Yes Yes Works as Yes 1/0 No Yes Yes Tested & Yes 1/0 No Yes Yes Works as Q1755 Yes 2 Zoom only Yes Yes Tested & Q1755-E Yes 2 Zoom only Yes Yes Works as 206, No 0/0 No No No Works as 206-M, No 0/0 No No No Works as 206-W, No 0/0 No No No Works as 207, Yes 1/0 No Yes No Works as 207-MW, Yes 1/0 No Yes No Works as 207-W, Yes 1/0 No Yes No Works as 210, Yes 1/0 No Yes No Tested & 210A, Yes 1/0 No Yes No Tested & 211, Yes 1/0 No Yes No Works as 211-A, Yes 1/0 No Yes No Tested & 211-M, Yes 1/0 No Yes No Tested & 211-W, Yes 1/0 No Yes No Tested & 28

29 223M, No 2/0 No No No Tested & 225FD, No 2/0 No Yes No Tested & M1004-W No 1/1 No Yes Yes Works as M1013 No 0/0 No Yes Yes Works as M1014 No 0/0 No Yes Yes Works as M1033-W Yes 1/1 No Yes Yes Works as M1034-W Yes 1/1 No Yes Yes Works as M1054 Yes 1/1 No Yes Yes Tested & M1143-L No 0/0 No Yes Yes Works as M1144-L No 0/0 No Yes Yes Works as M2014-E No 1/1 No Yes Yes Works as P1353 Yes 1/1 No Yes Yes Works as P1354 Yes 1/1 No Yes Yes Works as P1355 Yes 1/1 No Yes Yes Works as P1357 Yes 1/1 No Yes Yes Tested & Q1602 Yes 1/1 No Yes Yes Works as Q1602-E Yes 1/1 No Yes Yes Works as Q1604 Yes 1/1 No Yes Yes Works as Q1604-E Yes 1/1 No Yes Yes Works as Q1765-LE Yes 2/2 Zoom only Yes Yes Works as M3011 Fixed Dome Cameras, No 0/0 No Yes Yes Works as M3014 No 0/0 No Yes Yes Tested & M3113-R No 0/0 No Yes Yes Works as M3113- VE No 0/0 No Yes Yes Works as 29

30 M3114-R No 0/0 No Yes Yes Works as M3114- VE No 0/0 No Yes Yes Works as M3203 No 0/0 No Yes Yes Tested & M3203-V No 0/0 No Yes Yes Works as M3204 P3301 Yes 1/0 No Yes Yes Tested & P3301-V Yes 1/0 No Yes Yes Works as P3304 Yes 1/0 No Yes Yes Tested & P3304-V Yes 1/0 No Yes Yes Works as P3343 Yes 1/0 No Yes Yes Tested & P3343-V Yes 1/0 No Yes Yes Works as P3343-VE Yes 1/0 No Yes Yes Works as P3344 Yes 1/0 No Yes Yes Tested & P3344-V Yes 1/0 No Yes Yes Works as P3344-VE Yes 1/0 No Yes Yes Works as P3346 Yes 1/0 No Yes Yes Tested & P3346-V Yes 1/0 No Yes Yes Works as P3346-VE Yes 1/0 No Yes Yes Works as 209FD, No 0/0 No Yes No Tested & 209FD-R, No 0/0 No Yes No Works as 209MFD, No 0/0 No Yes No Tested & 209MFD- R, No 0/0 No Yes No Works as 216FD, Yes 1/0 No Yes No Works as 216FD-V, Yes 1/0 No Yes No Works as 30

31 216MFD, Yes 1/0 No Yes No Works as 216MFD- V, Yes 1/0 No Yes No Works as M3004-V No 0/0 No Yes Yes Works as M3005-V No 0/0 No Yes Yes Works as M3006-V No 0/0 No Yes Yes Works as M3007-P No 0/0 No Yes Yes Works as M3007- PV M3024- LVE M3025- VE M3026- VE No 0/0 No Yes Yes Tested & No 1/1 No Yes Yes Works as No 1/1 No Yes Yes Works as No 1/1 No Yes Yes Works as P3353 No 0/0 No Yes Yes Works as P3354 No 0/0 No Yes Yes Works as P3363-V Yes 1/1 No Yes Yes Works as P3363-VE Yes 1/1 No Yes Yes Works as P3364-V Yes 1/1 No Yes Yes Works as P3364-VE Yes 1/1 No Yes Yes Works as P3384-V Yes 1/1 No Yes Yes Works as P3384-VE Yes 1/1 No Yes Yes Works as P3367-V Yes 1/1 No Yes Yes Works as P3367-VE Yes 1/1 No Yes Yes Works as Covert cameras P1204 No 1/1 No Yes Yes Works as P1214 No 1/1 No Yes Yes Works as P1214-E No 1/1 No Yes Yes Works as P8513 No 0/0 No Yes Yes Works as 31

32 P8514 No 0/0 No Yes Yes Works as PTZ Cameras 212PTZ, Yes 1/0 Yes Yes No Tested & 212PTZ -V, Yes 1/0 Yes Yes No Works as 213PTZ, Yes 2/0 Yes Yes No Works as 214PTZ, Yes 1/0 Yes Yes No Works as 215PTZ, Yes 1/0 Yes Yes No Works as 215PTZ -E, Yes 1/0 Yes Yes No Tested & PTZ Dome Cameras P5512 Yes 4 Yes Yes Yes Tested & P5512-E Yes 4 Yes Yes Yes Works as P5522 Yes 4 Yes Yes Yes Tested & P5522-E Yes 4 Yes Yes Yes Works as P5532 Yes 4 Yes Yes Yes Tested & P5532-E Yes 4 Yes Yes Yes Works as P5534 Yes 4 Yes Yes Yes Works as P5534-E Yes 4 Yes Yes Yes Works as Q6032-E No 0/0 Yes Yes Yes Works as Q6034 No 0/0 Yes Yes Yes Works as Q6034-E No 0/0 Yes Yes Yes Works as 231D+, No 0/0 Yes Yes No Tested & 232D+, No 0/0 Yes Yes No Works as 233D, Yes 4/4 Yes Yes No Tested & M5013 No 0/0 Yes Yes Yes Works as 32

33 M5014 No 0/0 Yes Yes Yes Tested & Q6035 Yes 4 Yes Yes Yes Tested & Q6035-E Yes 4 Yes Yes Yes Works as Q6035-C No 2 Yes Yes Yes Works as Q6042 Yes 2 Yes Yes Yes Works as Q6042-E No 0/0 Yes Yes Yes Works as Q6044 Yes 2 Yes Yes Yes Works as Q6044-E No 0/0 Yes Yes Yes Works as Q6045 Yes 2 Yes Yes Yes Works as Q6045-E No 0/0 Yes Yes Yes Works as P5414-E Yes 4 Yes Yes Yes Works as P5415-E Yes 4 Yes Yes Yes Works as P5544 Yes 4 Yes Yes Yes Works as Thermal Cameras Q1910 Yes 2 No Yes Yes Tested & Q1910-E Yes 2 No Yes Yes Works as Q1921 Yes 2 No Yes Yes Tested & Q1921-E Yes 2 No Yes Yes Works as Q1922 Yes 2 No Yes Yes Works as Q1922-E Yes 2 No Yes Yes Works as Q1931-E Yes 2 No Yes Yes Works as Q8721-E Yes 0/0 Yes Yes Yes Works as Q8722-E Yes 0/0 Yes Yes Yes Works as Audio I/O Box P8221 NA Yes 8 Yes No No Tested & 33

34 All other models Generic DPC* DPC* DPC* DPC* DPC* DPC* Works as * DPC - depends on camera capability Note For devices in I/O column which have 1 number present i.e 2, 4 or 8 this is because the I/O ports are configurable. In the case of 2 there could be 2/0, 0/2 or 1/1. In the case of 4 there could be 4/0, 0/4, 2/2, 1/3 etc. Bosch VideoEdge camera handler is fully integrated with the Bosch communications line of IP cameras. The VideoEdge NVR is fully integrated with the cameras (with Bosch API version 3.0). As Bosch continues to release new cameras to the market, the VideoEdge camera handler provides a generic Bosch camera driver that can connect to (compatible with Bosch API version 3.0) camera. Supported Bosch cameras: Model CODEC Supported Audio I/O VideoEdge Versions Supported Certification AutoDome (Supported Firmware v ) VJR-821-ICCV Yes 2/ Works as VJR-811-ICCV Yes 2/ Works as VJR-821-IWCV Yes 2/ Works as VJR-811-IWCV Yes 2/ Tested & VJR-821-ICTV Yes 2/ Works as VJR-811-ICTV Yes 2/ Works as VJR-821-IWTV Yes 2/ Works as VJR-811-IWTV Yes 2/ Works as VG5-825-ECEV Yes 2/ Tested & VG5-825-ETEV Yes 2/ Works as NBN (Supported Firmware v ) Dinion NBN Yes 2/ Tested & Dinion NBN V Yes 2/ Works as Dinion NBN WV Yes 2/ Works as Dinion NBN W Yes 2/ Works as Dinion NBN-921-P Yes 2/ Tested & Dinion NBN-921-2P Yes 2/ Works as Dinion NBN-921-IP Yes 2/ Works as Dinion NBN-832V-P Yes 2/ Works as Dinion NBN-832V-IP Yes 2/ Tested & Dinion NBC-265-P Yes 1/ Tested & AutoDome 700 (Supported Firmware v ) VG5-713-CCE2 Yes 2/ Works as 34

35 VG5-723-CCE2 Yes 2/ Works as VG5-713-ECE2 Yes 2/ Works as VG5-714-ECE2 Yes 2/ Works as VG5-723-ECE2 Yes 2/ Works as VG5-724-ECE2 Yes 2/ Works as VG4 AutoDome Series (Supported Firmware v5.72) VG4-100 Series Yes 2/ Works as VG4-200 Series Yes 2/ Works as VG4-300 Series Yes 2/ Works as VG4-500i Series Yes 2/ Works as Generic All other models CBC Dual Stream (, ) * DPC - depends on camera capability Yes DPC* Works as VideoEdge camera handler is fully integrated with the CBC megapixel cameras. CBC cameras operating system (firmware) is continually evolving; please make sure your camera is running the most current firmware available. Supported CBC Cameras: Model CODEC Supported Audio I/O VideoEdge Versions Supported Certification Fixed IP Cameras MP1A No No Works as MP1DN No No Works as MP2A No No Tested & MP2DN No No Works as MP3DN No No Tested & MP5A No No Works as MP5DN No No Works as Indoor Dome Cameras MP8D-L4 No No Works as Generic All other models Dual Stream (H.264+) Yes DPC* Works as * DPC - depends on camera capability Dahua This VideoEdge camera handler is fully integrated with the Dahua line of IP cameras. Dahua, generally, doesn't change the core API interface for their cameras. This VideoEdge camera handler is based on the Dahua core API package version DAHUA_HTTP_API_FOR_IPC_V1.30. As Dahua continue to release new cameras there may be instances where specific Dahua cameras are not listed in these release notes. A generic Dahua camera handler is available for these cameras. 35

36 Supported Dahua cameras: Model CODEC Supported Audio I/O Edge Based Motion Detection Supported PTZ VideoEdge Version Supported Certification Fixed Box IPC-HF3500 Yes 1/0 Yes N/A Works as IPC-HF3301 Yes 1/0 Yes N/A Works as IPC-HF3300 Yes 1/0 Yes N/A Works as IPC-HF3200 Yes 1/0 Yes N/A Works as IPC-HF3101 Yes 1/0 Yes N/A Tested & IPC-HF3100 Yes 1/0 Yes N/A Works as IPC-HF3110 Yes 1/0 Yes N/A Works as IPC-HFW3301C Yes 1/0 Yes N/A Works as IPC-HFW3300 Yes 2/0 Yes N/A Works as IPC-HFW3300C Yes 2/0 Yes N/A Works as IPC-HFW3200C Yes 2/0 Yes N/A Works as IPC-HFW3200S No No Yes N/A Works as IPC-HFW3101C Yes 2/0 Yes N/A Works as IPC-HFW2100 No 0/0 Yes N/A Works as IPC-HFW3110 Yes 2/0 Yes N/A Works as Dome IPC-HDB3301 Yes 2/0 Yes N/A Works as IPC-HDB3301-DI Yes 2/0 Yes N/A Works as IPC-HDB3300 Yes 2/0 Yes N/A Tested & IPC-HDB3200 Yes 1/0 Yes N/A Works as IPC-HDB3200-DI Yes 1/0 Yes N/A Tested & IPC-HD3200 Yes 1/0 Yes N/A Works as IPC-HDB3200C No 0/0 Yes N/A Works as IPC-HDB3101 Yes 1/0 Yes N/A Works as IPC-HDB3101-DI Yes 1/0 Yes N/A Works as IPC-HDB3100 Yes 1/0 Yes N/A Works as IPC-HD3100 Yes 1/0 Yes N/A Works as IPC-HD2100 No 0/0 Yes N/A Works as IPC-HDB3110 Yes 2/0 Yes N/A Works as IPC-HDBW3301 Yes 2/0 Yes N/A Works as IPC-HDBW3301-DI Yes 2/0 Yes N/A Works as IPC-HDBW3300 Yes 2/0 Yes N/A Works as IPC-HDBW3200 Yes 1/0 Yes N/A Works as IPC-HDBW3200-DI Yes 1/0 Yes N/A Tested & IPC-HDW3200 Yes 1/0 Yes N/A Works as IPC-HDW3200S No 0/0 Yes N/A Works as IPC-HDBW3101 Yes 1/0 Yes N/A Works as IPC-HDBW3101-DI Yes 1/0 Yes N/A Works as IPC-HDBW3100 Yes 1/0 Yes N/A Works as IPC-HDW3100 Yes 1/0 Yes N/A Works as 36

37 IPC-HDW2100 No 0/0 Yes N/A Works as IPC-HDBW3110 Yes 2/0 Yes N/A Works as IPC with Motorized Lens IPC-HFW3202C Yes 2/0 Yes Zoom Tested & IPC-HDB3202 Yes 1/0 Yes Zoom Works as IPC-HDB3202-DI Yes 1/0 Yes Zoom Works as IPC-HDBW3202 Yes 1/0 Yes Zoom Works as IPC-HDBW3202- DI Home-use IPC Yes 1/0 Yes Zoom Works as IPC-K100 No 0/0 Yes N/A Works as IPC-K100A Yes 1/0 Yes N/A Works as IPC-K100W Yes 1/0 Yes N/A Tested & PTZ SD6583A-HN Yes 7/0 Yes Yes Works as SD6582A-HN Yes 7/0 Yes Yes Tested & SD6582C-HN Yes 7/0 Yes Yes Works as SD3282D-GN Yes 7/0 Yes Yes Works as SD6580-HN Yes 7/0 Yes Yes Works as SD6580C-HN Yes 7/0 Yes Yes Works as SD6380D-HN Yes 7/0 Yes Yes Works as SD6983A-HN Yes 7/0 Yes Yes Works as SD6982C-HN Yes 7/0 Yes Yes Works as SD6982A-HN Yes 7/0 Yes Yes Works as SD6980C-HN Yes 7/0 Yes Yes Works as SD6980-HN Yes 7/0 Yes Yes Works as Generic All other models Model Dependent** Yes Yes Works as Generic model is full featured and supports dual video streams, audio stream, PTZ, dry contact events, query device, Edge device motion detection and alarm out. For specific models, the handler dynamically queries the cameras for capabilities. FLIR In this release the VideoEdge camera pack is fully integrated with FLIR s D, PT and F series, multi sensor, pan tilt and fixed thermal security cameras. The following cameras are supported with minimum camera firmware version nexus-server- GD_v

38 Supported FLIR cameras: Model CODEC Supported Audio I/O VideoEdge Versions Supported Certification Fixed Cameras F-112, No No Works as F-117, No No Works as F-124, No No Works as F-304, No No Works as F-307, No No Works as F-313, No No Works as F-324, No No Tested & F-334, No No Works as F-348, No No Works as F-606, No No Works as F-610, No No Works as F-612, No No Works as F-618, No No Works as F-625, No No Works as F-645, No No Works as F-VIS, No No Works as Outdoor Dome Cameras D-313, No No Works as D-324, No No Tested & D-334, No No Works as D-348, No No Works as D-618, No No Works as D-625, No No Works as D-645, No No Works as Multi-Sensor Pan Tilt Cameras PT-112, No No Works as PT-117, No No Works as PT-124, No No Works as PT-304, No No Works as PT-307, No No Works as PT-313, No No Works as PT-324, No No Tested & PT-334, No No Works as PT-348, No No Works as PT-606, No No Works as PT-610, No No Works as PT-612, No No Works as PT-618, No No Works as PT-625, No No Works as PT-645, No No Works as 38

39 Generic All other models N/A N/A N/A N/A N/A Panasonic Corp VideoEdge camera handler is fully integrated with the Panasonic line of IP cameras. Panasonic, generally, doesn't change the core API interface for their cameras. VideoEdge camera handler is based on Panasonic core API package version 1.28, supporting both WV and DG versions of the listed cameras. As Panasonic continues to release new cameras there may be instances where specific Panasonic cameras are not listed in the available camera pack. A generic Panasonic camera handler is available for these cameras. Supported Panasonic cameras and encoders: Model CODEC Supported Audio I/O VideoEdge Certification Versions Supported Encoders GXE500, Yes 3/ Tested & Fixed Dome Cameras NW484, No 1/ Tested & NW484S, No 1/ Works as NW502S, Yes 3/ Works as SF332, Yes 1/ Works as SF335, Yes 1/ Tested & SF336, Yes 1/ Tested & SF342, Yes 1/ Works as SF346, Yes 1/ Works as SW352, Yes 1/ Works as SW355, Yes 1/ Works as NF284, Yes 1/ Tested & NF302, Yes 1/ Tested & SP508 No 3/ Works as SF538 No 3/ Works as SF548 No 3/ Works as SW558 No 3/ Works as SP509 Yes 3/ Works as SF539 Yes 3/ Works as SF549 Yes 3/ Works as SW559 Yes 3/ Tested & SW152 No No Tested & SW155 No No Works as SF132 No No Works as SF135 No No Works as PTZ Dome Cameras NW960, Yes 3/ Works as 39

40 NW964, Yes 3/ Tested & NS950, Yes 3/ Tested & NS954, Yes 3/ Works as NS202, Yes 1/ Works as NS202A, Yes 1/ Tested & SC384, Yes 3/ Works as SC385, Yes 3/ Tested & SC395, Yes 3/ Works as SC386, Yes 3/ Tested & SC396 Yes 3/ Works as ST162 Yes 1/ Works as ST165 Yes 1/ Tested & SW172 Yes 1/ Works as SW174W Yes 1/ Works as SW175 Yes 1/ Works as Fixed Cameras NP244, Yes 1/ Tested & NP304, Yes 1/ Tested & NP502, Yes 3/ Tested & SP102 No No Tested & SP105 No No Tested & SP302, Yes 1/ Works as SP305, Yes 1/ Tested & SP306, Yes 1/ Tested & SP304, Yes 1/0 4.3, 4.5 Works as SF334, Yes , 4.5 Works as SW314, No 1/0 4.3, 4.5 Works as SW316, Yes 1/0 4.3, 4.5 Works as SW316L, Yes 1/0 4.3, 4.5 Tested & Generic All other models Single Stream (, ) * DPC - depends on camera capability DPC* DPC* 4.3, 4.5 Works as Pelco This VideoEdge camera handler is fully integrated with the Pelco line of IP cameras. Pelco, generally, doesn't change the core API interface for their cameras. This VideoEdge camera handler is based on the Pelco API released on July 31, As Pelco continue to release new cameras there may be instances where specific Pelco cameras are not listed in these release notes. Pelco camera handler will get the camera capability dynamically when the specific camera is being added to NVR, and determine whether the specific camera is supported or not. If the camera is supported, it will be added to NVR successfully. 40

41 Supported Pelco cameras: Model Series Box CODEC Supported Audio I/O PTZ Supported Edge Based Motion Detection Supported Edge Based Motion Meta data Supported VideoEdge Versions Supported Certification IL10 H.264 No DPC* No No No Works as IXS0 IXES1 (Enh) IX10 IXE10 IXE11 (Enh) IXE20 IXE21 (Enh) IX30 IXE31 (Enh) IXP Bullet IBP Series,,,,, Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as No DPC* No Yes No Works as No DPC* No Yes No Works as Yes DPC* No Yes No Works as No DPC* No Yes No Works as Yes DPC* No Yes No Works as No DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as DPC* DPC* No Yes No Works as IDS0 Dome DPC* DPC* No Yes No Works as ID10 DPC* DPC* No Yes No Works as IDE10 DPC* DPC* No Yes No Works as IDE20 DPC* DPC* No Yes No Works as IDE20-P IDE20-OV ID30 DPC* DPC* No Yes No Works as DPC* DPC* No Yes No Works as DPC* DPC* No Yes No Works as 41

42 IES0 IE10 IE30 IEE10 IEE20 Ruggedized, Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as IEE20-P IEE20-OV IMS0 Mini IMES1 (Enh) IM10 IME11 (Enh) IME21 (Enh) IME31 (Enh) IMP PTZ Spectra H.264 Spectra HD 720P Spectra HD 1080P 20X Spectra HD 1080P 30X Excite IP, Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* Yes No No Works as DPC* DPC* Yes No No Works as DPC* DPC* Yes No No Works as DPC* DPC* Yes No No Works as No DPC* Yes No No Works as Esprit SE IP Integrated PTZ No DPC* Yes No No Works as TI3 Thermal Yes DPC* No Yes No Works as 42

43 TI6 Esprit TI3 Esprit TI6 Encoder NET5401T NET5402T NET5404T Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as Yes DPC* No Yes No Works as No 1/0 Yes No No Works as No DPC Yes No No Works as No DPC Yes No No Works as *DPC - depends on camera capability You can also found the information of supported Pelco camera series from below link: Note Some of the cameras with MPEG-4 format are not supported by Pelco handler though they may appear in the above Pelco developers' network link. For example, camera model series like IP3701 and encoder models like NET5301T are not supported because both of these device types don't support dynamic query of device capability. Samsung VideoEdge camera handler is fully integrated with the Samsung communications line of IP cameras. The VideoEdge NVR is fully integrated with the cameras (with Samsung API TYPE1 and TYPE2 version 2.7.4). As Samsung continues to release new cameras to the market, the VideoEdge camera handler provides a generic Samsung camera driver that can connect to (compatible with Samsung API version 2.7.4) cameras. Supported Samsung Cameras and Encoders: Model CODEC Supported Audio I/O Edge Based Motion Detection Supported PTZ Supported VideoEdge Versions Supported Certification Encoders SPE-100 SPE-400 SPE-400B SPE-101 SPE-1600,,,,, Yes 1/0 Yes Yes Works as Yes 4/0 Yes Yes Tested & No 0/0 Yes Yes Works as No 0/0 Yes Yes Works as No 0/0 Yes Yes Works as 43

44 SNZ-5200 Box Series Cameras, Yes 1/0 Yes N/A Tested & SNB-2000 SNB-3000 SNB-3002 SNB-5000 SNB-7000 SNB-5000A,,,,,, Yes 2/0 Yes N/A Works as Yes 2/0 Yes N/A Works as Yes 1/0 Yes N/A Tested & Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as SNB-5001 No 1/0 Yes N/A Works as SNB-7001 No 1/0 Yes N/A Works as SNB-7002 Yes 1/0 Yes N/A Works as SNB-6004 SNB-6003,, Yes 1/0 Yes N/A Tested & Yes 1/0 Yes N/A Works as SNO-5080R Bullet Series Cameras, No 1/0 Yes N/A Works as SNO-7080R Yes 1/0 Yes N/A Works as SNO-7082R, Yes 1/0 Yes N/A Works as SNO-6084R, Yes 1/0 Yes N/A Works as Fixed Dome Series Cameras SNV-5010 No No Yes N/A Tested & SNV-3080 SNV-3120,, No 2/0 Yes N/A Works as Yes 1/0 No N/A Works as SNV-5080 SNV-5080R SNV-7080 SNV-7080R SND-3080 SND-3082,,,,,, Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as No 2/0 Yes N/A Tested & Yes 1/0 Yes N/A Works as 44

45 SND-3080F SND-3080C SND-3080CF SND-5080 SND-5080F SND-7080 SND-7080F SND-1080,,,,,,,, No 2/0 Yes N/A Works as No 2/0 Yes N/A Works as No 2/0 Yes N/A Works as Yes 1/0 Yes N/A Tested & Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Tested & Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as SND-3082F, Yes 1/0 Yes N/A Works as SND-5011 No 1/0 Yes N/A Works as SND-5061 No 1/0 Yes N/A Works as SND-7011 No 1/0 Yes N/A Tested & SND-7061 No 1/0 Yes N/A Works as SND-7082 Yes 1/0 Yes N/A Works as SND-7082F Yes 1/0 Yes N/A Works as SND-6084, Yes 1/0 Yes N/A Works as SND-6083 SND-6084R SND-3082 SND-7082 SND-6084R,,,,, Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as Yes 1/0 Yes N/A Works as SNP-3120 SNP-3120V PTZ Series Cameras,, Yes 2/0 No Yes Tested & No 0/0 No Yes Works as SNP-3120VH SNP-3371 SNP-3302,,, No 0/0 No Yes Works as Yes 4/0 Yes Yes Tested & No 4/0 Yes Yes Works as 45

46 SNP-3302H SNP-3371TH SNP-5200 SNP-5200H SNP-3430H SNP-3371H,,,,,, Yes 4/0 Yes Yes Works as Yes 4/0 Yes Yes Works as Yes 4/0 Yes Yes Tested & No 0/0 Yes Yes Works as Yes 0/0 Yes Yes Works as Yes 4/0 Yes Yes Works as SNP-6200 H.624, Yes 4/0 Yes Yes Tested & SNP-6200H H.624, No 0/0 Yes Yes Works as SNP-5300 H.624, No 0/0 Yes Yes Tested & SNP-5300H H.624, Yes 4/0 Yes Yes Works as All other models Generic Model dependent* Yes* Yes* Yes Yes* Works as * Generic model is full featured which support dual video streams, audio stream, PTZ, dry contact events, query device, Edge device motion detection, alarm out. For specific model, handler dynamic query capabilities from camera. SONY This version of VideoEdge camera handler provides full integration with the SONY line of Video Encoders and IP cameras. SONY has number of API s (Application Programming Interface) camera handlers to communicate with their cameras. The VideoEdge NVR is fully integrated with SONY s 3 rd, 4 th, and 5 th generations of IP cameras. As SONY continues to release new cameras there can be instances where specific SONY cameras are not listed in the camera pack camera- list. A generic SONY camera handler is available in these instances. Supported SONY cameras and encoders: Model CODEC Supported Audio I/O VideoEdge Versions Supported Encoders Certification SNT-EX 101, Yes 2/ Works as SNT-EX 101E, Yes 2/ Works as SNT-EX 104, Yes 4/ Tested & SNT-EP 104, Yes No Works as SNT-EP 154, No No Tested & SNT-EX 154, Yes 4/ Tested & Fixed Cameras SNC-CS20, Yes 1/ Works as SNC-CH160, No No Tested & SNC-CH140, Yes 1/ Works as 46

47 SNC-CH240, Yes 1/ Tested & SNC-CH180, Yes 1/ Works as SNC-CH280, Yes No Works as SNC-CH120, No No Works as SNC-CH220, No No Works as SNC-CH260, No No Works as SNC-CM120, Yes 1/ Works as SNC-CS50N, Yes 1/ Tested & SNC-CS50P, Yes 1/ Works as SNC-CH110, No No Tested & SNC-CH210, No No Works as SNC-EB520, No 1/ Tested & SNC-EM520, No 0/ Works as SNC-EM521, No 0/ Works as Mini Dome Cameras SNC-DH140, Yes 1/ Works as SNC-DH140T, Yes 1/ Works as SNC-DH240, Yes 1/ Works as SNC-DH240T, Yes 1/ Works as SNC-DH280, Yes No Works as SNC-DH120, No No Works as SNC-DH120T, No No Works as SNC-DH220T, No No Works as SNC-DH160, No No Works as SNC-DH260, No No Works as SNC-DS10, Yes 1/ Works as SNC-DS60, Yes 1/ Works as SNC-DM110, Yes 1/ Works as SNC-DM160, Yes 1/ Works as SNC-DF50N, Yes 1/ Works as SNC-DF50P, Yes 1/ Works as SNC-DF80N, Yes 1/ Works as SNC-DF80P, Yes 1/ Works as SNC-DF85N, Yes 1/ Works as SNCDF85P, Yes 1/ Works as SNC-DH220, No No Tested & SNC-DH110, No No Works as SNC-DH110T, No No Works as SNC-DH210, No No Tested & SNC-DH210T, No No Works as SNC-DH180, Yes 1/ Tested & PTZ Dome SNC-RS44N, Yes 4/ Works as SNC-RS44P, Yes 4/ Works as SNC-RS84N, Yes 4/ Works as SNC-RS84P, Yes 4/ Works as 47

48 SNC-RS86N, Yes 4/ Works as SNC-RS86P, Yes 4/ Works as SNC-RH124, Yes 4/ Tested & SNC-RH164, Yes 4/ Works as SNC-RX530N, Yes 2/ Works as SNC-RX530P, Yes 2/ Works as SNC-RX550N, Yes 2/ Works as SNC-RX550P, Yes 2/ Works as SNC-RX570N, Yes 2/ Works as SNC-RX570P, Yes 2/ Works as SNC-EP550, Yes 2/ Works as SNC-EP580, Yes 2/ Tested & SNC-ER250/ER521, Yes 2/ Tested & SNC-EP520/EP521, Yes 2/ Works as SNC-ER550, Yes 2/ Works as SNC-ER580, Yes 2/ Works as Generic All other models Vivotek Corp. Dual Stream (H.262,, ) No No Works as VideoEdge camera handler is fully integrated with the Vivotek line of IP cameras. Vivotek generally doesn t change the core API interface for their cameras. VideoEdge camera handler is based on Vivotek API URL Command Document for All Series Version 1.4a, supporting all the listed cameras. As Vivotek continues to release new cameras, there may be instances where specific Vivotek cameras are not listed in the supported camera list. A generic Vivotek camera handler is available for these cameras. Supported Vivotek Cameras and Encoders: Model CODEC Supported Audio I/O VideoEdge Certification Versions Supported Encoders VS8801, Yes 8/ Tested & Fixed IP Cameras FD8136, Yes 1/ Works as FD8135H, Yes 3/ Tested & FD8335H, Yes 3/ Works as FE8171 Yes 1/ Tested & FE8171V Yes 1/ Works as FE8172 Yes 1/ Tested & FE8172V Yes 1/ Works as SF8172 Yes 1/ Works as SF8172V Yes 1/ Works as AF5127 Yes 1/ Works as AF5127V Yes 1/ Works as 48

49 IP8362, Yes 1/ Tested & PTZ Cameras SD8313E, Yes 3/ Tested & SD8323E, Yes 3/ Works as SD8312E, Yes 3/ Works as SD8322E, Yes 3/ Works as SD8311E, Yes 3/ Works as SD8321E, Yes 3/ Works as SD8362E, Yes 3/ Works as PZ8111, Yes 1/ Tested & PZ8121, Yes 1/ Tested & PZ8111W, Yes 1/ Works as PZ8121W, Yes 1/ Works as Generic All other models Model Dependant Generic Reduced Functionality 49

50 Appendix A Dry contact Alarm Recording With this patch release, the ability now exists to record the duration of a dry contact while active. In the NVR Admin Web GUI, on the Devices Alarms Sensors Page when defining an action, two new options have been added to the Action dropdown options: Camera Recording Camera Start Recording New Camera Stop Recording New PTZ to Preset Camera Recording The Sensor will only be triggered by the selected Input State from the section above. If the Recording Mode is set to Record-Only-On-Alarm (orange triangle), recording will begin and will include only the following: Alarm Pre Buffer + selected Sensor Input State trigger time + Alarm Post Buffer. After the configured Alarm Post Buffer, recording will turn off. Camera Start Recording Similar to Camera Recording above, the Sensor will only be triggered by the selected Input State. Recording (including Alarm Pre Buffer) will begin and will continue indefinitely. 50