below. AOTF Module / Optics R O B U ST. R E L I A B L E. A C C U R A T E AOTF Video Adapter (Series VA310) KEY FEATURES POTENTIAL APPLICATIONS

Transcription

1 KEY FEATURES VIS-NIR-SWIR Range nm Low-Power Consumption High-Switching Speed: 16,000 λ/sec Real Time Image Display Solid State / No Moving Parts High-Spectral Resolution Immune to vibration No Hysteresis Dual Use: Multispectral or Hyperspectral Imaging below. Suitable for Spectral Transmission & Reflectance Imaging AOTF Video Adapter (Series VA310) Brimrose s AOTF Video Adapters, Series VA310, are designed to be used with the customer supplied camera. Three versions ( nm, nm and nm) are available in the VIS region and one in the SWIR region ( nm). The universal C- Mount connection allows the end user to interface the camera with the AOTF module. The system is provided with the AOTF Module, Front Objective Lens and AOTF Controller as shown below: Front Objective Lens AOTF Module / Optics C-Mount POTENTIAL APPLICATIONS Military UAV Platform Laboratory and Industrial Applications Environmental Science Waste Material Sorting Remote Sensing Biological and Biomedical Research Cancer Detection Online Quality and Process Monitoring Other OEM Applications To PC or Laptop AOTF Control Driver The AOTF Controller includes input / output triggers allowing the end user easier interface and control of the camera. The VIS VA310 Series is provided with standard of the shelf f28mm zoom lens, and the SWIR system includes the Brimrose custom f22.5mm front objective lens. Brimrose Corporation of America

2 AOTF Video Adapter VA310 Specifications Model # VA VA VA VA Device Type Image Quality AOTF Wavelength Range nm nm nm nm Spectral Resolution 2-6 nm 5-20 nm Spatial Resolution Up to 2560 x 1920 pixels (Camera Dependent) Up to 1280 x 960 pixels (Camera Dependent) Sensor Size * 9 x 6.7 mm (2/3") 16 x 12.8 mm 12.8 x 9.6 mm Field of View for Camera System (Horizontal) Working Distance o with Zoom Lens f28-80 mm See above depends on lens use 16 o with Brimrose C-Mount SWIR Lens f22.5 mm Camera Mount ** Lens Mount Driving Power RF Connector - type Weight Dimensions C-mount C-Mount and F, PK Mount Adapter or OEM Integration ~2 watts SMA < 1.0 kg W x H x D: 60 x 70 x 178 mm * Other sensor sizes are available upon request. ** Other mounts are available upon request.

3 SPS/SPF Model AO Controller Specifications The SP Model AO Controllers are high-performance, RF frequency synthesizers incorporated into a self-contained case with AC power supply. A modular cable with a DB9 connector interface allows frequency control via the Personal Computer USB port (Serial RS232 optional). Using simple commands with any terminal (modem) program (such as ProComm) allows the user to set any frequency from the computer keyboard. In addition, included with the unit is a frequency control program that can be used with any IBM PC. Driver Model # VFI-XX-YY-SPS-A-C3 VFI-XX-YY-SPF-A-C3 Frequency Range Matching the AOTF requirements. Frequency Step Size 1 khz 10 Hz Frequency Stability 0.010% absolute (100 PPM); +15 o C to +75 o C 0.015%; +15 o C to +75 o C Frequency Switching Speed 15 ms typ. (from f min to f max ) 8 ns Minimum Duration of Each Step Power Output N/A 32 ns for sweeping mode 1 ms for hopping mode (for <300 hops) 15 ms for hopping mode (>300 hops) 5.0 w optimized for maximum performance of the AOTF device. Power Control N/A 12 bit attenuator with 25 db range (min.) Modulation Enclosure None (TTL or Analog Optional) The unit will be packaged in a 190 mm (7.5 inch) wide by 100 mm (4 inch) high by 220 mm (8.75 inch) deep instrument case. The rear panel heat sink increases the depth to 240 mm (9.75 inches) maximum. The size is exclusive of connectors. A detachable AC line cord and RF cable are provided. Environmental Output Impedance Output Connectors Nominal Laboratory Conditions: The maximum temperature is +35 C. The unit is not sealed against moisture or condensing humidity. 50 ohms SMA jack on front panel

4 OEM DS1 AO Controller The DS1 Direct Digital Synthesizer AO Controller is an RF frequency synthesizer. Key features of this controller includes control of input AOTF 1st and 2nd order beam wavelength / amplitude and level intensity output of incoherent or coherent laser light source. A compact OEM or laboratory version enclosure are available to suites application needs. Model No.: DS1-XX-XXX-A-M-T1-SO Parameter Value Unit Note Frequency Range XX to XXX MHz Frequency Resolution 1 Hz Frequency Stability +/- 25 Optional +1/-1 ppm 0 to 40 C, after 15 min warm-up Output Power 2 Watt 50 ohm impedance Total Harmonic < 15 dbc Analog Modulation Input - B1* 0-1 V Digital Modulation Input - B2* V None, See Note below for options Trigger Input (TI) V 3.3V CMOS compatible Sync Output (SO) 0 3 V 3.3V CMOS compatible Minimum Interval Computer Interface 32ns for linear scan 40 µsec for random scan USB Power Supply / 1 VDC / A Serial Communication (COM on PC), ASCII command RF Connector - SMA Option TI-SO Trigger Input / Sync Output Enclosure Type 140mm W x 95mm H x 55mm D OEM Enclosure. Max. temperature: 0-35 C ambient. Mounting flange must be heat sinked. Temperature at the mounting flange must not exceed 60 C. * B1 or B2 must be added to the model number. If none, please place A.

5 SWIR f22.5mm/f3.5 Lens Specifications Brimrose has designed the first Brimrose SWIR f22.5mm/f3.5 lens for operation in the nm wavelength range. The lens performs best with the Brimrose VA video adapter, or the IS or IS hyperspectral imagers. Specification Operating Wavelength Range Focal Length Aperture Mount Type Focus Distance Format Compatibility Angle of View (H & V) SWIR f22.5mm/f3.5 Lens nm 22.5 mm F3.5 ~ F16 C-Mount 0.5 m ~ All Brimrose SWIR AOTF Imaging System 16 o Groups/Elements 4/6 Dimensions (D x L) Weight Approx. 55 x 122 mm 340 g