Cisco.Actualtests v by.Nana.154q

Transcription

1 Cisco.Actualtests v by.Nana.154q Number: Passing Score: 800 Time Limit: 120 min File Version: Exam Code: Exam Name: Implementing Cisco Connected Physical Security 1 Exam

2 Exam A QUESTION 1 Order the following resolutions, by pixel count, from lowest to highest. A. D1, HD, QCIF, CIF B. D1, CIF, 4CIF, HD C. QCIF, CIF, D1, HD D. QCIF, D1, CIF, HD /Reference: QUESTION 2 What are the two differences between interlaced and progressive scan video? (Choose two.) A. Progressive scan video is generally better with fast-moving objects B. Interlaced video is generally better with fast-moving objects C. Interlaced video is constructed out of alternating odd and even lines D. Progressive scan video is constructed out of alternating odd and even lines Correct Answer: AC /Reference: QUESTION 3 Where should outdoor surveillance cameras be mounted when nearby sources of light are present? A. The camera should be mounted lower than the light source. B. The camera should be mounted in parallel with the nearest light source. C. The camera should be mounted above the light source. D. Location does not matter, as long as the camera is day/night capable. Correct Answer: A /Reference: QUESTION 4 What is the correct camera and lens setup for the use of IR lighting? A. Color camera with IR corrected lens B. A camera with day/night mode and IR corrected lens C. A camera with day/night mode and varifocal lens D. Color camera with varifocal lens

3 /Reference: QUESTION 5 Which switch port capability is recommended for an MSP server? A. Server switch ports should have 10/100 Mb capability B. Server switch ports should have 1000 Mb capability C. Server switch ports should have 10 Gb capability D. Servers should be connected to PoE-capable switches /Reference: QUESTION 6 On a converged network infrastructure, which Layer 2 technology can be easily enabled and configured to ensure separation of video surveillance traffic on the network from other sources (such as voice, , and web browsing)? A. IP routing B. Firewall C. QoS D. VLAN Correct Answer: D /Reference: QUESTION 7 In addition to bandwidth, which factors should be considered when designing an IP network capable of delivering high-quality surveillance video in real time? A. Minimize jitter and maximize latency B. Minimize latency and maximize jitter C. Minimize both jitter and latency D. Maximize both jitter and latency

4 /Reference: QUESTION 8 The Cisco Physical Security CPS-MSP-1RU-K9 platform can support which configuration of option cards? A. 1 x CIVS-FC-1P B. 2 x CIVS-ENC-8P C. 2 x CIVS-ENC-16P D. 1 x CIVS-FC-1P and 1 x CIVS-ENC-8P Correct Answer: A /Reference: QUESTION 9 Which two of the following Cisco Physical Security MSP servers support an optional secondary power supply? (Choose two.) A. CPS-MSP-1RU-K9 B. CPS-MSP-2RU-K9 C. CPS-MSP-4RU D. CPS-SS-4RU E. CIAC-PAME-1125-K9 C /Reference: QUESTION 10 What is the maximum number of internal encoder ports supported by the CPS-MSP-2RU-K9? A. 16 B. 24 C. 32 D. 48 Correct Answer: D /Reference: QUESTION 11 Which of the following must be considered when calculating storage and retention on a Cisco Physical Security

5 MSP server? A. Number of cameras, frame rates, camera distances, and record on motion requirements B. Number of cameras, frame rates, and server locations C. Number of cameras, frame rates, compression types, and record on motion requirements D. Number of cameras, camera distances, server locations, and compression types /Reference: QUESTION 12 What is the approximate total usable drive capacity for a CPS-MSP-1RU-K9 populated with 4 x 1 TB HDDs? A. 1 TB B. 2 TB C. 3 TB D. 4 TB /Reference: QUESTION 13 Order the servers from lowest to highest usable capacity. A. 2RU (6 x 1 TB), 2RU (12 x 1 TB), 2RU (6 x 2 TB), 2RU (12 x 2 TB) B. 2RU (6 x 1 TB), 2RU (6 x 2 TB), 2RU (12 x 1 TB), 2RU (12 x 2 TB) C. 2RU (12 x 2 TB), 2RU (12 x 1 TB), 2RU (6 x 2 TB), 2RU (6 x 1 TB) D. 2RU (12 x 2 TB), 2RU (6 x 2 TB), 2RU (12 x 1 TB), 2RU (6 x 1 TB) /Reference: QUESTION 14 How can video storage requirements be calculated? A. Camera count x bit rate x days recording B. Bit rate x frames per second x days recording C. Frames per second x codec x camera count D. Camera count x bit rate x hard drive capacity Correct Answer: A

6 /Reference: QUESTION 15 By default, which two passwords are NOT configured in Cisco Video Surveillance Manager 6.3.2? (Choose two.) A. VSMC password B. VSOM root user password C. Operator root user password D. Linux root user password E. MySQL root password E /Reference: QUESTION 16 Which network service should be enabled and configured to ensure an accurate and consistent time source for all video surveillance devices in the network? A. CDP B. DHCP C. NTP D. TCP/IP /Reference: QUESTION 17 In VSM 6.3.2, should the default password be changed to a new password? A. No, never change the default passwords B. Change the password for VSOM, but not the password for the operating system C. Yes, change the passwords for VSOM and the operating system D. The default passwords cannot be changed /Reference: QUESTION 18 When an installation of VSM is complete, what is the Cisco recommendation and best practice for the final step that should be taken?

7 A. Create a configuration backup on the same server B. Create a backup in a location other than the server C. Delete any batch administration files left over from the installation D. Stop and restart each archive /Reference: QUESTION 19 Upon power on, the CPS-MSP-2RU-K9 server starts beeping and continues to do so, even if the server seems to be operational. What is the probable cause of this issue? A. The clock battery in the server is empty and needs to be replaced B. One of the fans in the power supply has failed C. The incoming power voltage into the power supply is too low or too high D. One of the hard disk drives has failed and needs to be replaced Correct Answer: D /Reference: QUESTION 20 On a VSMS server, what is YaST used for? A. To check the status of the RAID storage B. To configure the network settings C. To monitor the network performance D. To troubleshoot video stream errors /Reference: QUESTION 21 You have been called to troubleshoot a network connectivity issue with a new Cisco VSM deployment. You are unable to ping the network gateway from the MSP server. Using the ifconfig command, you notice there are multiple network interfaces configured on the operating system. Which one of these network interfaces does the MSP server use in order to connect to the network gateway? A. LAN0 B. NIC1 C. Gigabit 0/1 D. ETH0 Correct Answer: D

8 /Reference: QUESTION 22 Which of the following Cisco Physical Security MSP servers support 2 TB hard drives? A. CPS-MSP-1RU-K9 only B. CPS-MSP-2RU-K9 only C. CIVS-MSP-4RU only D. CPS-MSP-1RU-K9, CPS-MSP-2RU-K9, and CIVS-MSP-4RU /Reference: QUESTION 23 When adding a new IP camera to VSM 6.3.2, which of the following is not an option when selecting Role Rights? A. View B. Modify C. Manage D. None /Reference: QUESTION 24 Servers can be added to VSM as which two of the following options? (Choose two.) A. VSMS Ð Backup B. VSMS C. VSBWT D. VSCS E. VSOM Ð Backup Correct Answer: AB /Reference: QUESTION 25 When configuring an event in Cisco VSOM, which of the following is not a valid configuration option?

9 A. Soft Trigger B. Analytics Trigger C. Time-Based Trigger D. Device Trigger /Reference: QUESTION 26 When configuring a recurring schedule in Cisco VSM, the user must select which of the following? A. Start Date, End Date, and Time Range B. Start Date and End Date C. Start Date, Occurrences, and Grooming Options D. End Date, Occurrences, and Grooming Options Correct Answer: A /Reference: QUESTION 27 When editing a view, which of the following cannot be changed? A. Camera Tour options B. Layout options C. Viewing Pane properties D. Default Display options /Reference: QUESTION 28 When editing a schedule, which of the following can be modified? A. Occurrences, End Date, and Rights B. Occurrences, Start Date, and End Date C. Start Date, End Date, and Rights D. Occurrences, Start Date, and Rights Correct Answer: A /Reference:

10 QUESTION 29 For event integration with a third-party application that supports HTTP triggers, which event type will you most likely use? A. Device trigger B. Soft trigger C. Motion event D. Third-party trigger /Reference: QUESTION 30 Which two of the following video feeds are not displayed under Batch Administration? (Choose two.) A. Cameras that are not made by Cisco and that have MJPEG encoding B. Child feeds C. Secondary feeds defined on Cisco cameras D. Camera feeds with 2CIF resolution E. Offline camera feeds C /Reference: QUESTION 31 When setting up a dual stream configuration, you should do which of the following? A. Configure the primary stream in VSOM and configure the secondary stream directly on the camera. B. Configure the primary and secondary streams directly on the camera first before adding the camera to VSOM. C. Configure both the primary and secondary streams from VSOM. D. It does not matter, since streams can be configured on VSOM or on the camera. /Reference: QUESTION 32 When adding a backup media server to VSOM, which of the following options is not correct? A. Backup media server can back up archives from multiple media servers B. Camera recordings can be selectively backed up

11 C. Either full recording or events from the past 24 hours can be backed up on a daily basis D. Backups can be scheduled to occur in the future, for example, after one week or one month Correct Answer: D /Reference: QUESTION 33 Cisco VSM services can be started, stopped, or restarted by using the Linux CLI. How do you stop the Cisco services on the server via the CLI? A. /etc/init.d/cisco stop B. /etc/init.d/cisco_all stop C. cisco stop D. /usr/init.d/cisco stop Correct Answer: A /Reference: QUESTION 34 From which web interface can the Cisco VSMS be upgraded? A. VSOM admin pages B. VSOM operator pages C. VSMC management console page D. VSMS BWT pages /Reference: QUESTION 35 What is the most typical reason for the following error? "Client Error: Insufficient client resources" A. The video surveillance camera does not have enough onboard memory resources to sufficiently render the video stream. B. VSMS has too many camera streams configured and has reached its threshold. C. The video software on the client PC or workstation is unable to set up the necessary resources to handle the video feed. D. The client PC or workstation does not have sufficient hard disk space resources to render the video streams.

12 /Reference: QUESTION 36 After troubleshooting an issue with VSM 6.3.2, you determine that a support case should be opened with Cisco TAC. VSM includes a tool to generate a support report for this purpose. Where is the support report generated from for Cisco TAC analysis? A. VSOM Admin pages > Reports tab B. VSOM Admin pages > Database Backups tab C. VSOM Admin pages > Health Dashboard tab D. VSMC Correct Answer: D /Reference: QUESTION 37 On a properly qualified client PC that meets workstation requirements, streaming video appears choppy with ghosting artifacts, but recorded clips that have been extracted and saved to the local PC do not display any quality issues. What is the most common cause of this problem? A. H.264 video needs to "settle" in the recording for best quality B. Network path congestion, QoS, and/or bandwidth issues C. Camera problem D. Video card driver /Reference: QUESTION 38 A new VSMS server has been added to VSOM, but the storage capacity says "No Repositories." What should you do in order to resolve this? A. Restart VSOM B. Delete the newly added VSMS server from VSOM, and re-add the server C. The HDDs are faulty. Replace the HDDs in the newly added media server D. Configure the Local Repositories setting from the VSMC page of the newly added media server Correct Answer: D /Reference: QUESTION 39 Users are is complaining of an error message when they first log into VSOM. The message is red on a black

13 background. What should be done? A. Their workstations are not powerful enough. Replace their workstations. B. This is not an error. A default view has not been selected. C. They are using an unsupported browser, and should switch to Internet Explorer. D. They are not using Microsoft Windows, and only Windows PCs are supported. /Reference: QUESTION 40 Which of the following resources can provide a real-time view into the media server activity and state of operation? A. support-report B. httpd.access C. ims.log D. vsom_health.log /Reference: QUESTION 41 In the Cisco VSM solution, VSOM is used for which two of the following functions? (Choose two.) A. View live and recorded video B. Record video from IP cameras C. Upgrade the VSMS D. Configure IP cameras, archives, and events E. Configure storage repositories for the system Correct Answer: AD /Reference: QUESTION 42 In the Cisco Video Surveillance solution, which of the following is the core component for distribution, archiving, and management of video feeds? A. Operations Manager B. Media Server C. Virtual Matrix D. Physical Security Operations Manager

14 /Reference: QUESTION 43 You are working with a customer, CSI Industries, to deploy Cisco Video Surveillance at a new branch office. As part of a centralized surveillance network design, IP cameras will stream across the WAN and be recorded by VSMS at the main data center. IP surveillance cameras will be placed on their own subnet to separate them from other voice and data traffic. The network administrator has allocated the following subnet for IP cameras: /27. What is the maximum number of IP cameras that can be placed on this subnet? A. 16 B. 30 C. 32 D. 254 /Reference: QUESTION 44 The branch security manager at a retail bank is asked to create a centralized surveillance solution using Cisco VSM. However, the WAN link between headquarters and some of the branches has limited bandwidth. Using Cisco VSM, flexibility of deployment is broad. Which one of the options below is NOT possible? A. Deploy a centralized VSM solution using H.264, instead of MJPEG encoding in branches with limited WAN speed B. Retain camera streams on local branch servers, and only access video from headquarters on demand (such as an event or alarm video) C. Configure cameras for H.264 encoding and 15 fps, store video locally on a server, then transcode the same video stream to 5 fps before sending it to the headquarters security center D. Configure dual streaming on each camerañone for high-quality local recording, and the other for streaming to headquarters over WAN E. Trigger remote viewing of live video stream only when the operator at headquarters requests it through VSOM /Reference: QUESTION 45 What is the source of video feeds that flow to a workstation for viewing? A. VSOM B. VSVM C. VSMS D. First VSMS and then through the VSOM server

15 E. Direct from the camera to the workstation /Reference: QUESTION 46 When should a parent-child proxy be used? A. When you are watching the same camera feed multiple times at a remote site that also has a media server B. When you are watching multiple camera feeds simultaneously at a remote site that also has a media server C. When you are watching the same camera feed multiple times at the local site D. When you are watching multiple camera feeds at the same time at the local site Correct Answer: A /Reference: QUESTION 47 How should the camera capacity for media servers be calculated? A. The CPS-MSP-1RU-K9 can handle up to 32 cameras. The CPS-MSP-2RU-K9 can handle up to 100 cameras. B. Camera capacity should be calculated by the available storage space on the media server C. Camera capacity should be calculated by the aggregate bit rate of all video streams, both inbound and outbound, on a media server D. Camera capacity cannot be calculated, and must be configured on site /Reference: QUESTION 48 In VSM 6.3.2, what is the maximum number of video panes that can be displayed at any given time in the VSOM Operators View? A. 4 B. 8 C. 16 D. 32 /Reference:

16 QUESTION 49 In VSM 6.3.2, which archive clip format allows for the downloading and playing back of multiple camera feeds simultaneously? A. CVA B. AVI C. WMV D. BWM Correct Answer: A /Reference: QUESTION 50 In VSM 6.3.2, which tool allows the user to search through archives by reviewing thumbnails? A. Smart Search B. Archive Clip C. Create View D. Forensic Search Correct Answer: D /Reference: QUESTION 51 In VSM 6.3.2, which of the following options cannot be used to create a snapshot? A. BMP B. TIFF C. PNG D. VSD Correct Answer: D /Reference: QUESTION 52 On the Operator page, which of the following view option check boxes are not available to a user that was created in VSOM? A. Title Bars B. Video Tools C. Reduced View D. Full Source

17 /Reference: QUESTION 53 You are ready to add a new media server to VSOM, as well as a new set of cameras that will archive video to this new VSMS. What is the first step you should perform in VSMC? A. Look in the system log for unknown messages B. Assign local repositories C. Check Mediaout to verify you have plenty of space available D. Define the RTP port range in the firewall /Reference: QUESTION 54 How are SNMP traps configured? A. SNMP traps can be added in the SNMP Trap Destinations section of VSMC B. SNMP traps are configured directly on the operating system C. SNMP traps are configured through VSOM, on the server network traps setup pages D. SNMP traps cannot be configured directly on the system, and a third-party application is needed Correct Answer: A /Reference: QUESTION 55 By default, when the IP address of a VSM server is typed into a web browser, the VSMC page appears. What needs to be done in order to change the default web page to the VSOM login page instead? A. Uninstall VSMC from the server. VSOM and VSMC should not be colocated on the same server B. Download VSOM from VSMC, and install it locally C. Under the Operations Manager menu in VSMC, set the default home page to VSOM instead of VSMC D. Under the Operations Manager menu in VSMC, enter the IP address for the VSOM page /Reference: QUESTION 56

18 Which of the following is a valid configuration for archives in VSM 6.3.2? A. Continuous Loop B. Simple Schedule C. Recurring Schedule D. Continuous Loop, Simple Schedule, and Recurring Schedule are valid configurations for archives in VSM Correct Answer: D /Reference: QUESTION 57 Which of the following reports are available in the Cisco Video Surveillance solution? A. User Configuration Report only B. Device Activity Report only C. Application History Report only D. User Configuration, Device Activity, and Application History reports are available in the Cisco Video Surveillance solution. E. User Configuration, Device Activity, and Application History reports are not available in the Cisco Video Surveillance solution. Correct Answer: E /Reference: QUESTION 58 Where do you install a new, third-party IP camera driver? A. VSOM only B. VSVM only C. VSMC only D. Third-party camera drivers can be installed through VSOM, VSVM, and VSMC E. Third-party camera drivers are not installed via VSOM, VSVM, or VSMC /Reference: QUESTION 59 In Cisco VSM 6.3.2, for which of the following does a license NOT need to be ordered? A. License for Virtual Matrix clients. B. License for the primary and secondary (if available and utilized) video streams on third-party (non-cisco) IP cameras.

19 C. Licenses for the primary and secondary (if used) video streams on Cisco IP Surveillance cameras. D. Licenses need to be ordered for Virtual Matrix Client, primary and secondary (if available and used) videos streams on third-party cameras, and primary and secondary (if used) video streams on Cisco IP cameras. Correct Answer: D /Reference: QUESTION 60 In VSM 6.3.2, how can PTZ cameras be controlled? A. USB joystick only B. USB mouse only C. PTZ interface control in VSOM only D. By a USB joystick, USB mouse, or PTZ control interface in VSOM. Correct Answer: D /Reference: QUESTION 61 Which Cisco IP Video Surveillance camera(s) allow for video to be stored locally (with optional storage accessory) in the event of losing network connectivity? A. Up to 16 GB of storage on 4300E and 4500E cameras B. Up to 8 GB of storage on 4300E and 4500E cameras C. Up to 8 GB of storage on 4300, 4300E, 4500, and 4500E cameras D. Up to 4 GB of storage on 2600 and 2900 series cameras /Reference: QUESTION 62 Which of the following statements is false with regard to the Cisco 4- and 8-channel standalone encoders? A. They both support dual streaming. B. They both support motion detection. C. They both support simultaneous video and audio. D. They both support H.264 compression. Correct Answer: A /Reference:

20 QUESTION 63 Which Cisco IP Video Surveillance camera model is vandal-resistant, ruggedized, and allows for deployment outdoors in difficult environments with high or low temperatures, moisture, or dust? A. CIVS-IPC-2611 B. CIVS-IPC-2621V C. CIVS-IPC-2630V D. CIVS-IPC-5010 /Reference: QUESTION 64 Which Cisco IP Video Surveillance camera(s) allow for remote focus and zoom through the web interface of the camera? A. CIVS-IPC-2500 and CIVS-IPC-2600 B. CIVS-IPC-2930 C. CIVS-IPC-2621V D. CIVS-IPC-4500E /Reference: QUESTION 65 What would be the advantage of using multicast instead of unicast to transport the camera video stream in the Cisco Video Surveillance solution? A. When viewing video stream on multiple operator workstations, the network will only be taxed with a single multicast stream. B. Multicast configuration on the switching and routing infrastructure is less complex than configuration for unicast traffic. C. You can configure one camera for streaming to two media servers at the same time, for data redundancy purposes. D. Multicast is not supported in the Cisco Video Surveillance solution. /Reference: QUESTION 66 When configuring the privilege level on a Cisco IP camera, which of the following is not a valid option?

21 A. Administrator B. User C. Monitor D. Viewer /Reference: QUESTION 67 How should you upgrade the firmware of the Cisco IP cameras deployed in a VSM system? A. Via the web interface of each camera only B. Via the VSMC page only C. Via the web interface of each camera and the VSMC page D. Via the Batch Admin tool /Reference: QUESTION 68 What does it mean when the video from a camera is black and white, but otherwise the picture is clear? A. The IR cut filter is in place B. The camera is not streaming the color data C. The camera has switched to night mode D. The camera is not getting enough power /Reference: QUESTION 69 When troubleshooting camera issues, which technology allows you to find the IP address of a Cisco IP camera from the Cisco switch it is connected to? A. DHCP B. SNMP C. CDP D. UPNP

22 /Reference: QUESTION 70 You are asked to design a Cisco Video Surveillance solution that will record 24 hours a day, in both bright and low light conditions. You decide to use Cisco IP cameras that are capable of day and night modes of operation. Which of the following Cisco IP camera series support day/night operations? A. Cisco 2600 Series SD IP cameras only B. Cisco 2900 Series SD PTZ IP cameras only C. Cisco 4000 Series HD IP cameras only D. Cisco 5000 Series HD PTZ IP cameras only E. Cisco 2600, 2900, 4000, and 5000 Series IP cameras Correct Answer: E /Reference: QUESTION 71 What is a possible cause for the motion detection feature not sending an alert? A. The SMTP server that the IP camera uses to send the may be filtering s to prevent spam from being sent through the server. B. The SMTP server that the IP camera uses to send the may not be filtering s to prevent spam from being sent through the server. C. Sudden changes in light level or movement have accidentally triggered the motion detector, and the configuration needs to be modified. D. The issue cannot be related to SMTP filtering, light levels, or movement. Correct Answer: A /Reference: QUESTION 72 Which two of the following are components of a virtualized VSM environment? (Choose two.) A. Cisco Physical Security MSP servers B. Cisco SRE 700 running UCS Express on ISR G2 routers C. Cisco SRE 910 running UCS Express on ISR G2 routers D. VMware vsphere (ESXi) E. Microsoft Hyper-V F. Citrix XenDesktop D /Reference:

23 QUESTION 73 What is the Cisco video architecture and technology that is embedded into Cisco IP cameras and can simplify deployment of video surveillance, save time, and reduce network configuration errors? A. Videoscape B. Medianet C. Cisco Discovery Protocol D. Media Experience Engine /Reference: QUESTION 74 Which of the following product families is a building block for a Cisco Borderless Network Architecture, designed specifically for branch deployments, and is capable of simultaneous LAN and WAN connectivity, security, mobility, voice, video, and customized applications such as Cisco Video Surveillance on a single platform? A. Cisco UCS B. Cisco Catalyst 3750-X Series Multilayer Switches C. Cisco 2600/3700 Series Multiservice Routers D. Cisco 2900/3900 Series Integrated Services Routers E. Cisco Wide Area Application Services Correct Answer: D /Reference: QUESTION 75 Which of the following Cisco products can natively pull video streams and camera hierarchy from the Cisco Video Surveillance system? A. Cisco Works B. Cisco Physical Access Manager C. Cisco Prime D. Cisco UCS Manager

24 /Reference: QUESTION 76 Which Cisco IOS switch command will provide information such as the IP camera model and firmware, connected switch port, IP address, and PoE power consumption? A. switch# show power inline B. switch# show ip cameras C. switch# show interface DeviceID D. switch# show cdp neighbors detail Correct Answer: D /Reference: QUESTION 77 How are customer workstations evaluated? A. The specifications must match Cisco recommendations exactly. B. The Workstation Profiler tool should be run to test each scenario. C. Workstations must be purchased from Cisco. No other options are supported. D. As long as the workstation runs Windows, it can display video streams. /Reference:

25 QUESTION 78 Choose the two operating system and browser combinations below that are supported for viewing video by Cisco VSM (Choose two.) A. Windows XP SP3 and Internet Explorer 8 B. Mac OS X 10.6.x and Safari 5.x C. SUSE Linux 10 SP1 and Firefox 6 or higher D. Windows 7 (64-bit) and Firefox 6 or higher E. Windows 7 (64-bit) and Internet Explorer 8 Correct Answer: AE /Reference: QUESTION 79 Using two identical graphics cards, how many monitors can be driven simultaneously for Cisco VSM 6.3.2? A. 2 B. 4 C. 6 D. 8 /Reference: QUESTION 80 Which of the following can affect the performance of the workstation that is used to display multiple panes of surveillance video? A. CPU and memory only B. Bus speed only C. Graphics card capabilities only D. CPU, memory, bus speed, and graphics card capabilities can affect workstation performance. E. CPU, memory, bus speed, and graphics card capabilities will not affect workstation performance. Correct Answer: D /Reference: QUESTION 81 Which two statements about differences between HD or full HD and megapixel cameras are true? (Choose two.)

26 A. Aspect ratio of full HD and megapixel cameras is the same. B. Resolution of full HD cameras is known, whereas megapixel cameras can vary. C. Megapixel cameras generally have higher frame rate than full HD cameras. D. Megapixel camera resolutions are common among different camera vendors. E. Megapixel cameras can have higher resolution than full HD cameras. E /Reference: QUESTION 82 Where should outdoor surveillance cameras be mounted when sources of light are nearby? A. Cameras should be mounted lower than the light source. B. Cameras should be mounted in parallel with the nearest light source. C. Cameras should be mounted above the light source. D. Location does not matter, as long as the cameras are day/night capable. Correct Answer: A /Reference: QUESTION 83 Cameras and a Cisco VSM server are connected to a Layer 2 switch. Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.)

27 A. GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command. B. GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command. C. Implement "router-on-a-stick". D. Implement inter-vlan routing. E. The link between GigE 0/5 and FE 1/1 should be configured as a trunk port. DE /Reference: QUESTION 84 Which option lists video resolutions in order from lowest to highest (by pixel count)?

28 A. D1, HD, QCIF, CIF B. D1, CIF, 4CIF, HD C. QCIF, CIF, D1, HD D. QCIF, D1, CIF, HD /Reference: QUESTION 85 Which three archive storage capacities are valid, per partition, in a virtualized Cisco VSM deployment on Cisco UCS C-Series? (Choose three.) A. 2 TB virtual disk B. 4 TB virtual disk C. 8 TB virtual disk D. 8 TB mapped raw LUN E. 16 TB mapped raw LUN F. 32 TB mapped raw LUN Correct Answer: ADE /Reference: QUESTION 86 What is the maximum number of Fibre Channel cards supported by any model of CPS-MSP servers? A. 1 B. 2 C. 3 D. 4 Correct Answer: A /Reference: QUESTION 87 Which three server platforms for Cisco Physical Security have built-in support for redundant power supplies? (Choose three.) A. Cisco UCS C-Series B. Cisco UCS B-Series C. Cisco UCS E-Series D. Cisco UCS Express / SRE 9xx

29 E. Cisco CPS-MSP-2RU-K9 Correct Answer: ABE /Reference: QUESTION 88 Cisco UCS B-Series chassis is populated with five half-width B200 compute blades. Each blade is configured with dual 6-core, 3 Ghz Intel Xeon processors and 96 GB of RAM. Assume 2 Mb video stream per camera and that no additional applications are running on this system. Which two configurations are valid and supported by this chassis? (Choose two.) A. 1 x VSOM virtual servers 20 x VSMS virtual servers 2,000 x cameras B. 2 x VSOM virtual servers 18 x VSMS virtual servers 2,000 x cameras C. 3 x VSOM virtual servers 15 x VSMS virtual servers 2,000 x cameras D. 4 x VSOM virtual servers 16 x VSMS virtual servers 2,000 x cameras E. 5 x VSOM virtual servers 20 x VSMS virtual servers 2,500 x cameras D /Reference: QUESTION 89 Which option must be considered when calculating storage and retention on a Cisco Physical Security MSP server? A. number of cameras, frame rates, camera distances, record on motion requirements B. number of cameras, frame rates, server locations C. number of cameras, frame rates, compression types, record on motion requirements D. number of cameras, camera distances, server locations, compression types /Reference: QUESTION 90 What is the approximate usable drive capacity for a CPS-MSP-2RU-K9 with half of the drive bays populated with 2 TB HDDs? A. 4 TB B. 8 TB C. 10 TB D. 20 TB

30 /Reference: QUESTION 91 In a brand new Cisco VSM7 physical appliance, in which two instances should you need to use the Linux CLI? (Choose two.) A. Very rarely, or never B. Only when you need to upgrade the Cisco VSM server using RPM commands C. During initial setup of network settings D. Rarely; use YaST instead E. Only as needed when working with Cisco TAC Correct Answer: AE /Reference: QUESTION 92 Which statement best describes the application deployment model that Cisco recommends for scaling Cisco VSM 7? A. The recommended application deployment model is a co-located system because it greatly simplifies deployment and management. B. Cisco VSM 7 is flexible enough that applications can be added or removed on-the-fly without any down time. C. The recommended application deployment model is to have a dedicated Operations Manager server with additional, dedicated Cisco VSMS servers. D. Additional media servers can be added to co-located Cisco VSOM or Cisco VSMS systems to achieve identical scale and capabilities as standalone Cisco VSOM + standalone Cisco VSMS systems. /Reference: QUESTION 93 Which statement best describes the physical and virtualized Cisco VSM 7 platforms that Cisco recommends? A. Operations Manager must be deployed on a physical MSP server, media server can be deployed on physical MSP servers and/or as virtual machines on Cisco UCS. B. Media server must be deployed on physical MSP server(s), Operations Manager can be deployed on physical MSP or as a virtual machine on Cisco UCS servers. C. Cisco VSM deployments should be either on dedicated physical MSP servers or virtualized UCS servers, but not both. D. Cisco VSM is interchangeable and interoperable across physical MSP and virtualized Cisco UCS deployments and can be mixed without additional configurations. Correct Answer: D

31 /Reference: QUESTION 94 When the CPS-MSP-2RU-K9 server is turned on, it starts beeping and continues to do so, even if the server seems to be operational. What is causing this issue? A. The clock battery in the server is drained and must be replaced. B. One of the fans in the power supply has failed. C. The incoming power voltage into the power supply is too low or too high. D. One of the hard disk drives has failed and must be replaced. Correct Answer: D /Reference: QUESTION 95 You just deployed a virtual, co-located Cisco VSM 7 OVA image and added a 1 TB virtual disk for media storage. You are trying to add a media server via Cisco VSOM and get the error message shown. What is causing this issue? A. The server should be rebooted. B. The Cisco VSM services on the server must be restarted. C. Media storage partitions were not created in the virtual machine. D. There was an issue with the import of the OVA image. The image should be reimported, new virtual hard drive should be added, and /media# directory created. /Reference: QUESTION 96 Which option lists the usable capacity on a Cisco MSP server from greatest to least? A. 2RU (12 x 2TB), 2RU (6 x 2TB), 2RU (12 x 1TB), 2RU (6 x 1TB) B. 2RU (12 x 2TB), 2RU (12 x 1TB), 2RU (6 x 2TB), 2RU (6 x 1TB) C. 2RU (6 x 1TB), 2RU (6 x 2TB), 2RU (12 x 1TB), 2RU (12 x 2TB) D. 2RU (6 x 1TB), 2RU (12 x 1TB), 2RU (6 x 2TB), 2RU (12 x 2TB)

32 /Reference: QUESTION 97 In the Cisco VSM 7.0.x solution, which three functions is Cisco VSOM used for? (Choose three.) A. View live and recorded video. B. Record video from IP cameras. C. Upgrade the Cisco VSMS. D. Modify the IP address of associated media servers. E. Configure IP cameras, archives, and events. F. Configure storage repositories for the system. Correct Answer: ADE /Reference: QUESTION 98 Which core component of the Cisco Video Surveillance solution is responsible for distribution, archiving, and storage of video feeds? A. Cisco VSOM B. Cisco SASD C. Cisco VSMS D. Cisco PSOM /Reference: QUESTION 99 In the Cisco VSM 7.0.x solution, where should you install a new, third-party IP camera driver? A. Cisco VSOM only B. Cisco VSMC only C. Cisco VSMS only D. Third-party camera drivers can be installed through Cisco VSOM, Cisco SASD, and Cisco VSMC. E. Third-party camera drivers are not installed via Cisco VSOM, Cisco VSMS, nor Cisco VSMC. /Reference:

33 QUESTION 100 How many Cisco camera licenses are included with Cisco VSOM? A. None. Even though they are no-cost part numbers, you still must order them separately depending on the number of cameras you plan to use. B C D. No licenses are necessary for Cisco cameras. /Reference: QUESTION 101 You are working with a customer, CSI Industries, to deploy Cisco Video Surveillance at a new branch office. As part of CSI's centralized surveillance network design, IP cameras will stream across the WAN and be recorded by Cisco VSMS at CSI's main data center. IP surveillance cameras will be placed on their own subnet to separate them from other voice and data traffic. CSI's network administrator has allocated this subnet for IP cameras: (subnet mask: ). What is the maximum number of IP cameras that can be placed on this subnet? A. 30 B. 254 C. 256 D. 510 E Correct Answer: D /Reference: QUESTION 102 The headquarters of a California regional bank wants to deploy a redundant IP video surveillance solution using Cisco VSM 7. The IT manager is asking for a redundant video storage solution, however, with minimal infrastructure cost. How should a Cisco VSM 7 redundancy be designed for this scenario? A. An IT engineer can define a cluster of Cisco VSMS servers, which all fall back to a backup Cisco VSMS server if any should fail. B. For redundancy, each media server needs to be doubled and servers then operate in load balancing fashion. C. VSM 7 can record the primary stream of each camera on Cisco media server (either MSP or virtual machine), and the secondary stream can be recorded to NAS storage for a cost-effective solution. D. Cisco VSM 7 does not support redundancy for Cisco VSOM and Cisco VSMS. Correct Answer: A

34 /Reference: QUESTION 103 What are the different view options in SASD? A. Alert Centric view, Map Centric view, Camera Centric view, Video Centric view B. Map Centric view, Camera Centric view, Alarm Centric view C. Map Centric view, Camera Centric view, Alarm Centric view, Event Centric view D. SASD views are fully customizable and as such there is no predefined viewing option. Correct Answer: A /Reference: QUESTION 104 How should the camera capacity for media servers be calculated? A. Cisco UCS Express can handle up to 32 cameras, CPS-MSP-1RU-K9 can handle up to 64 cameras, the CPS-MSP-2RU-K9 can handle up to 200 cameras, Cisco UCS C-Series can handle up to 1000 cameras, and Cisco UCS B-Series can handle up to 1000 cameras per blade. B. Camera capacity should be calculated by the maximum storage space on the media server when configured with full HDD utilization. C. Camera capacity should be calculated by the aggregate bit rate of all video streams, both inbound and outbound, on a media server. D. Camera capacity cannot be calculated, and must be configured on site. /Reference: QUESTION 105 In Cisco VSM (or higher), what is the maximum number of video panes that can be displayed at any given time in the VSOM Monitor Video tab? A. 1 B. 4 C. 16 D. 32 /Reference: QUESTION 106 In the Cisco Video Surveillance solution, which archive clip format allows for the downloading and playing back of multiple camera feeds simultaneously?

35 A. CVA B. AVI C. WMV D. BWM Correct Answer: A /Reference: QUESTION 107 In Cisco VSM 7.x, how can PTZ cameras be controlled? A. USB joystick only B. USB mouse only C. USB joystick and USB mouse are both required to control PTZ cameras. D. USB joystick or USB mouse can be used to control PTZ cameras. Correct Answer: D /Reference: QUESTION 108 In Cisco VSM 7.x, which tool allows the user to search through archives by focusing on a time slice of the video clip? A. Smart Search B. Archive Clip Search C. Thumbnail Search D. Forensic Search /Reference: QUESTION 109 In Cisco VSM 7, how many system default roles, user groups, and users exist in Operations Manager (Roles + User Groups + Users)? A. 8 B. 7 C. 6 D. 2

36 /Reference: QUESTION 110 Acme Company has two office buildings and has deployed Cisco Video Surveillance at this campus. A security guard who usually monitors surveillance video in Building A was asked to cover a colleague's shift in Building B. The operator successfully logs into Cisco SASD using his credentials and sees cameras in Building A, but is unable to view cameras in Building B. What is causing this issue? A. The user belongs to the system-defined "operator" role, which does not have sufficient permissions to view cameras in Building B. B. The user logged into the media server A instead of media server B. C. The user does not have an account on media server B. D. The user does not belong to the user group for Building B. E. The user does not have a compatible version of Cisco SASD and should use Operations Manager instead. Correct Answer: D /Reference: QUESTION 111 A system administrator is adding a new LTS media server to Operations Manager. Which three things must be configured? (Choose three.) A. IP address of the Operations Manager B. IP address of the LTS media server C. username and password for Operations Manager D. username and password for LTS media server E. password for Operations Manager F. password for LTS media server Correct Answer: ABF /Reference: QUESTION 112 After initial setup, a system administrator enters the IP address of the Cisco VSM server into the URL bar of the web browser and the Cisco VSMC login page is loaded. Which two situations is causing the issue? (Choose two.) A. Cisco VSOM is not the selected default login view. B. Cisco VSOM is not running on this server. C. Cisco VSMS is being managed by a separate Cisco VSOM server. D. Under the Operations Manager menu in Cisco VSMC, the default home page is set to Cisco VSMC instead of Cisco VSOM.

37 C /Reference: QUESTION 113 When a new camera template is added in Cisco VSOM, which two parameters are mandatory for configuring the template? (Choose two.) A. Template name B. Description C. Associated location D. Camera model E. Camera name Correct Answer: AC /Reference: QUESTION 114 Which three server types are valid when a new server is added to a Cisco VSM deployment? (Choose three.) A. primary media server B. backup media server C. redundant media server D. failover media server E. primary Operations Manager server F. redundant Operations Manager server Correct Answer: ACD /Reference: QUESTION 115 Which configuration is valid for recording video in the Cisco VSM 7.x solution? A. Continuous Recording mode B. Simple Schedule mode C. Recurring Loop mode D. Continuous Recording, Simple Schedule, and Recurring Loop are valid configurations for archiving. Correct Answer: A /Reference:

38 QUESTION 116 An operator is trying to set a lower video stream quality for a newly installed camera in the system. However, the video quality slider is grayed out and is not available. What is causing this issue? A. The operator does not have sufficient privileges to configure video stream properties. B. The camera only supports PAL settings, while the operator belongs to other location using NTSC standard only. C. The operator needs to ask an admin to log in and perform the changes to video quality settings. D. The operator should use a custom template. E. Camera is offline. Correct Answer: D /Reference: QUESTION 117 Which three Advanced Event configurations based on the template are valid? (Choose three.)

39 A. Trigger: Motion Started One-Time Action: Record for Some time Timeslot: Weekdays Stop after (min): 5 Stream Number: 1 B. Trigger: Motion Started One-Time Action: Alert Timeslot: --Any-.Stream Number: 1 C. Trigger: Motion Started One-Time Action: Record for Some time Timeslot: --Any-.Stop after (min): 5 Stream Number: 1 D. Trigger: Contact Opened One-Time Action: Aim Camera Timeslot: --Any-.Stream Number: 1 E. Trigger: Contact Opened One-Time Action: Record for Some time Timeslot: Nights and Weekends Stop after (min): 5 Stream Number: 1 Correct Answer: ACE /Reference: QUESTION 118 Which configuration flow is valid? A. Custom Schedules - Locations - Templates - Media Servers - Cameras B. Locations - Templates - Users - Media Servers - Cameras C. Locations - Schedules - Templates - Users - Cameras - Media Servers D. Locations - Schedules - Templates - Cameras - Media Servers - Users /Reference: QUESTION 119 When a View is edited, which four parameters can be modified? (Choose four.) A. access location

40 B. camera tour rotation order C. layout options D. cameras associated with a locked pane E. default video wall F. video wall rotation order Correct Answer: ABCD /Reference: QUESTION 120 When a Video Wall is edited, which three options can be modified? (Choose three.) A. access location B. camera tour rotation order C. layout options D. rollback time E. default view F. video wall rotation order Correct Answer: ADE /Reference: QUESTION 121 Which action type allows for event integration with a third-party application that supports HTTP triggers? A. Device trigger B. Soft trigger C. Motion event D. Alert /Reference: QUESTION 122 You are the system administrator for a newly deployed Cisco Video Surveillance solution. You want to save time by importing all of the Cisco IP cameras to the system without having to add each camera individually. Which two options accomplish this? (Choose two.)

41 A. Add each camera manually. B. Discover New Cameras (auto-discovery). C. Medianet auto-configuration. D. Import cameras from file. E. Set up a new media server to the deployment on the x network. D /Reference: QUESTION 123 You are the system administrator for a newly deployed Cisco Video Surveillance solution. Which three methods allow for all of the Cisco IP cameras to be added to the Cisco VSM 7 system successfully? (Choose three.)

42 A. Add each camera manually. B. Run Discover New Cameras (auto-discovery) for all networks shown. C. Medianet auto-configuration. D. Import cameras from file. E. Log into each camera and enter the Cisco VSOM server IP address into the web configuration interface of the camera. F. Set up a media server to the deployment to the x network. Correct Answer: ACD /Reference: QUESTION 124 In Cisco VSM 7, how should you configure a camera for dual-stream operations? A. Configure the primary stream in Cisco VSOM and configure the secondary stream directly on the camera. B. Configure the primary and secondary streams directly on the camera first before adding the camera to Cisco VSOM. C. Configure both primary and secondary stream in a template. D. It does not matter; streams can be configured on Cisco VSOM or on the camera. /Reference:

43 QUESTION 125 Which way of upgrading the Cisco VSM 7.x does Cisco recommend? A. via the management console web interface and.rpm files B. via the management console web interface and.zip file C. via Linux commandline:stop Cisco Services - Uninstall existing RPM files - Install new RPM files - Restart Cisco Services D. via an upgraded USB/DVD image /Reference: QUESTION 126 You just completed an upgrade of Cisco VSM from version 7.0 to using the management console. You also want to change the network settings of this server during this upgrade, but the fields are greyed out. What is causing this issue? A. The Cisco VSM services must be restarted before the network settings can be modified. B. The server is a co-located deployment (Cisco VSOM + Cisco VSMS applications) and the network was configured using the operating system. Changes should also be made using the operating system. C. The server is running the Cisco VSOM application and you should use the Cisco VSOM interface to change the network configurations. D. The server is running the Cisco VSMS application and you should use the Cisco VSOM interface to change the network configurations. Correct Answer: D

44 /Reference: QUESTION 127 You are the system administrator for a newly deployed Cisco Video Surveillance solution. To save time by not adding each camera individually, you decide to import Cisco IP cameras to the system using the Discover New Cameras method. However, cameras from the x network are not showing up after the discovery process. What is causing the issue? A. The medianet is misconfigured. B. Discover New Cameras must be rerun for each network. C. A media server must be set up on the x network prior to running Discover New Cameras. D. Discover New Cameras is working correctly. The cameras are in the Cameras Pending Approval list and must be enabled. /Reference: QUESTION 128 On a properly qualified client PC that meets workstation requirements, streaming video appears choppy with ghosting artifacts. However, recorded clips that are extracted and saved to the local PC for playback do not display any quality issues. What is causing the issue? A. H.264 video needs to "settle" in the recording for best quality. B. network path congestion, QoS, and/or bandwidth issues

45 C. camera problem D. video card driver /Reference: QUESTION 129 An operator is trying to log into Cisco VSM, however the login screen does not allow a change to the username (field is greyed out). What is causing this behavior? A. The operator is trying to log in on a workstation using an unsupported web browser, which allows only the local administrator to log in. B. The VSM system has just been rebooted and the user database has not been loaded yet. Refreshing the web page helps. C. The system is running low on resources and the access is temporarily limited to admin personnel only. D. The operator is trying to log into Cisco VSMC instead of Cisco VSOM. Correct Answer: D /Reference: QUESTION 130 As the system administrator, you have been asked to immediately delete cameras (and recordings) in Cisco VSM that are located at a building that was recently vacated by your company. Two days later, the night shift operator reports that although live video is unavailable, archived video from the vacated building is viewable. What must you do to purge the video archives? A. Wait until the retain recording timers expire, and then the archived video is purged automatically. B. Select the camera(s) in Cisco VSOM - Cameras and choose Full Delete. C. Move the soft-deleted cameras to a restricted location that is accessible only to system admins. D. Blacklist the camera(s) so that they no longer show up in Cisco VSM. /Reference:

46 QUESTION 131 As the system administrator, you have been asked to immediately delete cameras in Cisco VSM that are located at a building that was recently vacated by your company. However, due to security and corporate retention policy, you must keep the archived video for 14 days. What method does Cisco recommend to accomplish this task and ensure that the retention policy is met? A. "Soft Delete" the camera. B. Connect to the Cisco VSM server via FTP and transfer the video files to another server. C. Select the Retain Video and Blacklist option when deleting the camera. D. Set up Advanced Recording features and use an LTS server for retaining archives. Correct Answer: A /Reference: QUESTION 132 Mr. Cooper, branch security manager at a retail bank, is asked to create a centralized surveillance solution using Cisco VSM. However, the WAN link between HQ and some of the branches has very limited bandwidth. Using Cisco VSM, flexibility of deployment is broad. Which three changes make more efficient use of the limited bandwidth? (Choose three.) A. Deploy centralized Cisco VSM solution using H.264 instead of MJPEG encoding in branches with limited WAN speed. B. Retain camera recordings on local branch servers, and access video from HQ only when needed. C. Configure cameras for H.264 encoding and 15 FPS, store video locally on a server, then transcode the same video stream to 5 FPS before sending it to HQ security center. D. Configure dual streaming on each camera, one for high-quality local recording and the other for streaming to HQ over WAN. E. Enable multicast within the branch network and unicast video streams when traversing the WAN. Correct Answer: ABD /Reference: QUESTION 133 After you configure a new Cisco IP camera and save the configuration, you notice that under the Device Status tab for the same camera, Overall Status is Enabled: Critical. Despite the status, you can view the camera image and stream the video. What is causing the Critical configuration status?

47 A. No motion detection window has been set. B. The wrong template has been applied to the camera. C. The selected resolution is unsupported. D. There is a mismatch between the template settings and configurations on the IP camera itself. Correct Answer: A /Reference: QUESTION 134 Which four camera configurations are valid? (Choose four.) A. CIVS-IPC-3530:1280x720 at 30 fps

48 B. CIVS-IPC-3530:1280x800 at 30 fps C. CIVS-IPC-3530:1920x1080 at 5 fps D. CIVS-IPC-6030:1280x720 at 30 fps E. CIVS-IPC-6030:1280x800 at 30 fps F. CIVS-IPC-6030:1920x1080 at 15 fps Correct Answer: ABDF /Reference: QUESTION 135 Which three statements about the Cisco 4- and 8-channel standalone encoder are true? A. They both support dual streaming on all ports. B. They both support motion detection. C. They both support simultaneous video and audio. D. They both support H.264 compression. CD /Reference: QUESTION 136 Which Cisco Video Surveillance IP cameras can be configured as an indoor, vandal-resistant camera, without the use of a third-party external enclosure? A. CIVS-IPC-3520 B. CIVS-IPC-3530 C. CIVS-IPC-4500E D. CIVS-IPC-6000P Correct Answer: A /Reference: QUESTION 137 Which four Cisco IP camera families natively support medianet? (Choose four.) A. Cisco 2900 Series IP Cameras B. Cisco 3000 Series IP Cameras C. Cisco 4000 Series IP Cameras D. Cisco 5000 Series IP Cameras E. Cisco 6000 Series IP Cameras F. Cisco 7000 Series IP Cameras

49 CEF /Reference: QUESTION 138 What is the advantage of using multicast instead of unicast to transport the camera video stream in the Cisco Video Surveillance solution? A. When the video stream is viewed on multiple operator workstations, the network is taxed only with single multicast stream. B. Multicast configuration on switching and routing infrastructure is less complex than the configuration for unicast traffic. C. You can configure one camera to stream to two media servers at the same time, for data redundancy purposes. D. Multicast is not supported in the Cisco Video Surveillance solution. /Reference: QUESTION 139 You have installed a Cisco 4500E IP camera to monitor the area of interest near the center of an outdoor courtyard area 24 hours a day. Which three actions help to focus in on the area of interest and improve overall image quality? (Choose three.)

50 A. Use a wider angle lens to increase field of view. B. Enable Day/Night mode on the camera. C. Reposition the camera to minimize exposure of the sky. D. Avoid placing the camera near trees and other objects that could obstruct the view. E. Enable PTZ functionality to focus on the area of interest. CD /Reference: QUESTION 140 Cisco VSOM, Cisco VSMS servers, and IP cameras in the shown Cisco VSM deployment are utilizing default NTP behavior to ensure that time settings are synchronized across all devices. What is the IP address of the pointed-to NTP server for the device with IP address ?

51 A B C D /Reference: QUESTION 141 Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system? A. via the web interface of each camera only B. via Cisco VSOM - System Settings - System C. via Cisco VSMC - Maintenance - Server Upgrade D. via Cisco VSMC - Maintenance - Manage Drivers /Reference: QUESTION 142

52 You are the system administrator for a newly deployed Cisco Video Surveillance solution. Branch A cameras are streaming to Cisco VSMS-A and Branch B cameras are streaming to Cisco VSMS. B. Cisco VSOM is reporting a "Timed out waiting for server response" error when trying to load video from camera , but network pings are being responded to from your workstation at HQ. All other cameras from the network are working as expected. Which three options could have caused the error message? (Choose three.) A. There is a network configuration issue with the switch and switch port that camera is connected to. B. Media server is down and not responding. C. The Branch A and HQ routers are updating their routing tables and they have not yet converged. D. There is an IP address conflict on the network. E. The password on the camera was changed. Correct Answer: ADE /Reference: QUESTION 143 Why would a Cisco IP camera show clear, but black and white, video images? A. The IR cut filter is in place. B. The camera is not streaming the color data. C. The camera has switched to night mode. D. The camera is not getting enough power.

53 /Reference: QUESTION 144 When troubleshooting camera issues, which technology allows you to find the IP address of a Cisco IP camera from the Cisco switch it is connected to? A. DHCP B. SNMP C. CDP D. medianet /Reference: QUESTION 145 Which statement about virtualization support for Cisco VSM version is true? A. Cisco VSM 7 can be installed on any hypervisor, such as VMware vsphere, Microsoft Hyper-V, and Citrix XenServer B. Cisco VSM 7 OVA can be deployed and ready to use right away, without additional configuration steps. C. When using internal storage of Cisco UCS C-Series server for storing media repositories, external storage (such as SAN arrays) cannot be used. D. Each Cisco UCS B- or C-Series server can run several instances of Cisco VSM VM at the same time, as long as the resources of the server are sufficient. Correct Answer: D /Reference: QUESTION 146 Which Cisco technology is embedded in Cisco IP cameras that simplifies deployment of video surveillance, saves time, and reduces network configuration errors? A. Medianet MSI B. Medianet MSP C. Cisco Discovery Protocol D. Medianet Experience Engine Correct Answer: A /Reference:

54 QUESTION 147 Which product family is a building block for the Cisco Borderless Network Architecture, designed specifically for branch deployments and applications including Cisco Video Surveillance? A. Cisco UCS Express and UCS E-Series B. Cisco Catalyst 3750-X Series Multi-Layer Switches C. Cisco 3800 Unified Access Switches D. Cisco Integrated Services Routers Generation 2 Correct Answer: D /Reference: QUESTION 148 Which statement can be determined from the output shown? A. This is the output from the show power inline command. B. The connected device is an 802.af class 3 PoE camera. C. The switch management IP address is D. The PoE device is connected to switch port 0. /Reference: QUESTION 149

55 Which statement can be determined from the output shown? A. This is the output from the show power inline command. B. The connected device is an 802.af class 2 PoE camera. C. The switch management IP address is D. The PoE device is connected to switch port 7. Correct Answer: D /Reference: QUESTION 150 Which two OS + browser combinations are supported for viewing video using Cisco SASD? (Choose two.) A. Windows XP SP3 + Internet Explorer 8 (32- or 64-bit) B. Windows 7 (32-bit) + Internet Explorer 8 (32-bit) C. Windows 7 (32-bit) + Internet Explorer 9 (64-bit) D. Windows 7 (64-bit) + Internet Explorer 8 (32-bit) E. Windows 7 (64-bit) + Internet Explorer 9 (32-bit) Correct Answer: DE /Reference: QUESTION 151

56 Which option can affect the performance of the workstation used to display multiple panes of surveillance video? A. CPU and memory only B. bus speed only C. graphics card capabilities only D. CPU, memory, bus speed, and graphics card capabilities can affect workstation performance. E. CPU, memory, bus speed, and graphics card capabilities will not affect workstation performance. Correct Answer: D /Reference: QUESTION 152 Which two options are workstation requirements for Cisco VSM 7.x? (Choose two.) A. Microsoft Internet Explorer 8 (64-bit) B. Microsoft.NET Framework 4.0 C. Microsoft DirectX 11.0 or higher D. Microsoft Windows 7 Enterprise (64-bit) E. Microsoft Internet Explorer 8 (32-bit) C /Reference: QUESTION 153 You just developed a virtual co-located Cisco VSM 7 OVA image and added 1 TB for virtual disk for media storage. You ate trying to add Media Server via Cisco VSOM and get the following error message: "The follow error occurred while verified the hardware. Operation failed. There are no media partition on the media server..." Please the actions in column A below in the correct order to fix this error. Select and Place:

57 Correct Answer:

58 /Reference: QUESTION 154 Drag the actions from the left onto the locations on the right where they are performed. Select and Place:

59 Correct Answer: /Reference: