High intensity discharge lamps

Transcription

1 This lamp category offers excellent solutions for indoor lighting in retail, in hotels and restaurants as well as for outdoor lighting in road and city beautification. s and Gear High intensity discharge lamps 2.1

2 Introduction All lamps within the Compact HID category are among the most efficient and environmental-friendly lamps available.they are characterized by high reliability and long lamp life. Within the Compact HID category, clear modularity in lamp types is offered: The category of White SON SDW-T, MASTERColour CDM-TP and CDM-EP can be used the same luminair housing, and with the same reflector.this category is suited for open fixtures. temperatures can be chosen between 2500 K and 4200K in lumen packages up to 1000 lm. The category of MASTERColour CDM-TD and quartz MHN- TD Pro can be used in the same (closed) luminair with the same reflector and gear.the benefits of the MASTERColour CDM over quartz metal halide are clearly displayed in this category, by offering a 2x longer service life, very high reliability and a better color quality. The category of MASTERColour CDM-T and mini White SON SDW-TG lamps can be used the same luminair housing, and with the same reflector. temperatures can be chosen between 2500 K and 4200 K in lumen packages up to 00 lm. The category of MASTERColour CDM-TC offers a small size lamp, designed for small size fixtures. It will give the best performance when used in combination with electronic gear. The category of smallest MASTERColour lamp: the minimastercolour CDM-Tm offers the smallest system size in the market (comparable to halogen capsule lamps), designed for miniaturized fixtures. It can be used in combination with electronic gear only. The category of MASTERColour CDM-R reflector lamps meets the size of PAR 20 and PAR0 reflector lamps.the integrated reflector ensures the best, reliable performance. The category of MASTERColour CDM- R111 reflector lamps can be used in the popular halogen 111 fittings. It provides the benefits of the MASTERColour CDM technology in combination with an award-winning design look and comfort for the shoppers (due to its unique anti-glare shield, as well as its low heat output).this lamp gives the best performance in combination with electronic gear. High-pressure mercury-vapour lamps have been known for a long time, and are available as combined lamps (discharge lamp with integral heater filament) and as HPL-N and HPL-Comfort. These lamps are mainly used for street lighting. High pressure Metal-Halide vapour lamps represent another area of the HID range.the HPI(T) lamps are used for industrial lighting, floodlighting and the illumination of open areas and sports grounds.the MHD (-TD) lamps, with very good color reproduction and high power in very small envelopes, are ideal light sources for precision flood lights in large stadiums. The SO-E and SO low- pressure sodium vapour lamps with their monochromatic yellow light have the highest light efficiency of all light sources and are used for street lighting in various European countries. High-pressure sodium-vapour lamps SON, SON-T and SON- Comfort find their applications in street and open-area lighting, industrial lighting, training areas and floodlighting.their high efficiency and their gold-white color are particularly pleasing here. The top range of these lamps has the Philips Integrated Antenna which virtually eliminates early failures. 2.2 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.

3 MASTERColour CDM MASTERColour CDM-T MASTERColour CDM MASTERColour CDM-T CDM-T 70W G12 Range of single-ended, compact, high-efficiency, discharge lamps with a stable color over lifetime and a crisp, sparkling light Features Warm or cool white color impression rendering good to excellent Allows small-size luminaires designs that give high beam intensities Benefits Stable color impression over lifetime High lamp efficacy results in low operating costs and low heat generation Long lamp life compared with incandescent and halogen lamps Relatively low heat output enhances comfort for shoppers and staff All types are UV-Block for reduced fading risks Shops and shop windows, offices and public buildings Decorative outdoor: floodlighting and pedestrian areas Must be used in closed luminaires with a proper cover (IEC and 60598) Must be used in combination with a ballast and an ignitor, or electrical gear A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) If there is a constant voltage deviation of more than % of the rated voltage, a different ballast rating/tap must be used Electronic gear can be used, and increases lamp-life, improves system efficacy, and eliminates visible flicker MASTERColour CDM-T 5W/80 G G MASTERColour CDM-T 5W/942* G MASTERColour CDM-T 70W/80 G12 MASTERColour CDM-T 70W/942 G12 MASTERColour CDM-T 0W/80 G12 MASTERColour CDM-T 0W/942 G12 System Power G G G G Cap- MASTERColour CDM-T 5W/80 G12 MASTERColour CDM-T 5W/942* MASTERColour CDM-T 70W/80 G12 MASTERColour CDM-T 70W/942 G12 MASTERColour CDM-T 0W/80 G12 MASTERColour CDM-T 0W/942 G (sec) Re-ignition (min) Run-up % (min) Pinch MASTERColour CDM-T 5W/80 G CDMT5W80 MASTERColour CDM-T 5W/942* CDMT5W942 MASTERColour CDM-T 70W/80 G CDMT70W80 MASTERColour CDM-T 70W/942 G CDMT70W942 MASTERColour CDM-T 0W/80 G CDMT0W80 MASTERColour CDM-T 0W/942 G CDMT0W942 Note: * Electronic ballast only. Flux Mains Stable Operation min. (Im/W) Cap/ Operating Position (k) Net Weight Per Piece (g) Peak min. Overall Diameter Light center Arc length length length C D L O nom. nom. 5W/ W/ W/ W/ W/ W/ High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.5

4 MASTERColour CDM MASTERColour CDM-T MASTERColour CDM CDM-T /80 CDM-T /942 MASTERColour CDM-T /80 performance during run up MASTERColour CDM-T /942 performance during run up l la = current Φ = Flux V la = W la = l la = current Φ = Flux V la = W la = 2.6 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.7

5 MASTERColour CDM MASTERColour CDM-TC MASTERColour CDM MASTERColour CDM-TC Range of single-ended, very compact, high-efficiency, discharge lamps with a stable color over lifetime and a crisp, sparkling light Features Warm or cool white color impression with good color rendering Allows very small-size luminaires designs that give high beam intensities MASTERColour CDM-TC 5W/80 G8.5 MASTERColour CDM-TC 5W/942 G8.5* System Power Mains Stable Operation min. Cap/ G G MASTERColour CDM-TC 70W/80 G8.5* G (k) CDM-TC 70W Benefits Long lamp life compared with incandescent and halogen lamps UV-Block quartz outer bulb for reduced fading risks Stable color impression over lifetime High lamp efficacy results in low operating costs and low heat generation (which enhances comfort for shoppers and staff) MASTERColour CDM-TC 5W/80 G8.5 MASTERColour CDM-TC 5W/942 G8.5* MASTERColour CDM-TC 70W/80 G8.5* Flux (Im) (Im/W) Operating Position Peak min. Accent lighting display lighting with sparkling effect General and decorative lighting MASTERColour CDM-TC 5W/80 G8.5 (sec) 0 Re-ignition (min) Run-up % (min) Cap Pinch 00 Net Weight Per Piece (g) 10 CDMTC5W80 Luminaires Must be used in closed luminaires with a proper cover (IEC and 60598) MASTERColour CDM-TC 5W/942 G8.5* MASTERColour CDM-TC 70W/80 G8.5* Note: * Electronic ballast only CDMTC5W942 CDMTC70W80 System Preferably used with electronic gear, which offers minimum system volume, increases lamp-life, improves system efficacy, and offers flicker-free operation A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) CDM-TC /80 CDM-TC /942 [ W / (5nm. lm)] [nm] MASTERColour CDM-TC performance during run up Overall Diameter Light center Arc length length length C D L O nom. nom. 5W W l la = current Φ = Flux V la = W la = 2.8 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.9

6 MASTERColour CDM MASTERColour CDM-Tm MASTERColour CDM MASTERColour CDM-Tm MASTERColour CDM-Tm 20W/80 PGJ5 MASTERColour CDM-Tm 5W/80 PGJ5 Mains Stable Operation min. Cap/ (k) PGJ PGJ Miniature, single-ended ceramic metal halide lamp Crisp, sparkling light for a comfortable atmosphere Features Warm white color impression Good color rendering MASTERColour CDM-Tm 20W/80 PGJ5 MASTERColour CDM-Tm 5W/80 PGJ Flux (Im) Operating Position Peak (sec) Easy replacement due to robust twist-lock socket Universal burning position Benefits Stable color impression over lifetime High efficacy for low operating costs and low heat generation Long life compared with halogen lamps MASTERColour CDM-Tm 20W/80 PGJ5 MASTERColour CDM-Tm 5W/80 PGJ5 Re-ignition (min) Run-up % (min) Pinch Net Weight Per Piece (g) 6 6 CDMTM20W80 CDMTM50W80 CDM-Tm LK Relatively low heat output enhances comfort for shoppers and staff Mechanical retrofit in halogen capsule (G6.5) luminaires (same light centre length). For full retrofit, also gear and lampholder need to be exchanged UV Block for reduced fading risk of merchandise CDM-Tm /80 8 Accent and display lighting with a sparkling effect W/nm 6 Decorative outdoor floodlighting 4 Luminaires Must be used in closed luminaires with a proper cover (IEC and 60598) [nm] System Must be used in combination with Philips mini vision electronic gear Overall Diameter Light center Arc length length length C D L O nom. nom. 20W W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.11

7 MASTERColour CDM MASTERColour CDM-TP MASTERColour CDM MASTERColour CDM-TP CDM-TP PG12-2 Range of protected, high-efficiency, discharge lamps with a stable color over lifetime and a crisp, sparkling light to be used in open luminaires Features Warm or cool white color impression rendering good to excellent design is well-suited to be used in luminairs for power-spots (high intensity) and high-bay general lighting Double UV-Block quartz sleeves and a hard-glass outer bulb Benefits High lamp efficacy results in low operating costs and low heat generation Stable color impression over lifetime Long lamp life compared with incandescent and halogen lamps Relatively low heat output enhances comfort for shoppers and staff All types have UV-Block filtering for reduced fading risks Shops and shop windows, offices and public buildings Decorative outdoor: floodlighting and pedestrian areas System Power Mains Stable Operation min. Cap/ (k) MASTERColour CDM-TP 70W/80 PG PG MASTERColour CDM-TP 70W/942 PG PG MASTERColour CDM-TP 0W/80 PG PG MASTERColour CDM-TP 0W/942 PG PG Flux (Im/W) Operating Position Peak min. MASTERColour CDM-TP 70W/80 PG MASTERColour CDM-TP 70W/942 PG MASTERColour CDM-TP 0W/80 PG MASTERColour CDM-TP 0W/942 PG Re-ignition Run-up Cap- Net Weight (sec) (min) % (min) Per Piece (g) MASTERColour CDM-TP 70W/80 PG CDMTP70W80 MASTERColour CDM-TP 70W/942 PG CDMTP70W942 MASTERColour CDM-TP 0W/80 PG CDMTP0W80 MASTERColour CDM-TP 0W/942 PG CDMTP0W942 Luminaires Suitable for use in open luminaires CDM-TP /80 CDM-TP /942 System Must be used in combination with a ballast and ignitor or electrical gear A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) If there is a constant voltage deviation of more than % of the rated voltage, a different ballast rating/tap must be used Electronic gear can be used to increase lamp-life, improve system efficacy, and offer flicker-free operation MASTERColour CDM-TP /80 MASTERColour CDM-TP /942 performance during run up performance during run up Overall Diameter Light center Arc length length length C D L O nom. nom. 70W/ W/ W/ W/ l la = current Φ = Flux V la = W la = l la = current Φ = Flux V la = W la = 2.12 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.1

8 MASTERColour CDM MASTERColour CDM-TD MASTERColour CDM MASTERColour CDM-TD CDM-TD 70W Range of double-ended, compact, high-efficiency, discharge lamps with a stable color over lifetime and a crisp, sparkling light Features Warm or cool white color impression rendering good to excellent Retrofit in double-ended luminairs for quartz metal halide lamps (MHN/W-TD), thereby allowing to reduce operating costs and improve color quality Burning position horizontal +/-45 Benefits Stable color impression over lifetime High lamp efficacy results in low operating costs and low heat generation. Provides better operating costs and improved light quality versus standard quartz metal halide (MHN/W-TD) Long lamp life compared with incandescent, halogen and quartz metal halide (MHN/W-TD) lamps Relatively low heat output enhances comfort for shoppers and staff All types are UV-Block for reduced fading risks MASTERColour CDM-TD 70W/80 MASTERColour CDM-TD 70W/942 MASTERColour CDM-TD 0W/80 MASTERColour CDM-TD 0W/942 MASTERColour CDM-TD 70W/80 MASTERColour CDM-TD 70W/942 MASTERColour CDM-TD 0W/80 MASTERColour CDM-TD 0W/942 MASTERColour CDM-TD 70W/80 System Power Mains Stable Operation min. Cap/ (k) R7s R7s R7s R7s Flux (Im/W) Operating Position Peak P P P P45 (sec) Re-ignition (min) Run-up % (min) 0 Cap- Pinch Net Weight Per Piece (g) 21 min. CDMTD70W80 Shops and shop windows, offices and public buildings Decorative outdoor: floodlighting of facades, statues and monuments MASTERColour CDM-TD 70W/942 MASTERColour CDM-TD 0W/80 MASTERColour CDM-TD 0W/ CDMTD70W942 CDMTD0W80 CDMTD0W942 Luminaires Must be used in closed luminaires with a proper cover (IEC and 60598) CDM-TD /80 CDM-TD /942 System Must be used in combination with a ballast and ignitor or electronic gear A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) If there is a constant voltage deviation of more than % of the rated voltage, a different ballast rating/tap must be used Electronic gear can be used, and increases lamp-life, improves system efficacy, and eliminates visible flicker MASTERColour CDM-T /80 MASTERColour CDM-T /942 performance during run up performance during run up Overall length Width Arc length C D O nom. 70W/ W/ W/ W/ l la = current Φ = Flux V la = W la = l la = current Φ = Flux V la = W la = 2.14 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.

9 MASTERColour CDM MASTERColour CDM-R MASTERColour CDM MASTERColour CDM-R Range of compact, high-efficiency, discharge reflector lamps with a stable color over lifetime and a crisp, sparkling light Features Warm or cool white color impression with good color rendering High beam intensities are achieved very easy and efficiently from these compact reflector lamps CDM-R PAR20 10D A Benefits High lamp efficacy results in low operating costs and low heat generation Long lamp life compared with incandescent and halogen lamps Stable color impression over lifetime Unique DESIGN increases flexibility in application and allows powerful accents from small, unobtrusive luminaires Simplified luminaire design because CDM-R lamps can be used in open luminaires Relatively low heat output enhances comfort for shoppers and staff Integrated UV-Block shield reduces fading risks B C D E CDM-R PAR20 0D CDM-R PAR0L 10D CDM-R PAR0L 0D CDM-R PAR0L 40D Mains Stable Photo Letter MASTERColour CDM-R 5W/80 E27 PAR20 10D Operation min. (k) A MASTERColour CDM-R 5W/80 E27 PAR20 0D B MASTERColour CDM-R 5W/942 E27 PAR20L 10D* A MASTERColour CDM-R 5W/942 E27 PAR20L 0D* B MASTERColour CDM-R 5W/80 E27 PAR0L 10D C MASTERColour CDM-R 5W/80 E27 PAR0L 0D D Shops and shop windows, offices and public buildings Decorative outdoor: floodlighting and pedestrian areas MASTERColour CDM-R 70W/80 E27 PAR0L 10D C MASTERColour CDM-R 70W/80 E27 PAR0L 0D D MASTERColour CDM-R 70W/80 E27 PAR0L 40D E MASTERColour CDM-R 70W/942 E27 PAR0L 10D* C MASTERColour CDM-R 70W/942 E27 PAR0L 0D* D Luminaires E27 lampholders used must be suitable for ignition peaks up to 5 kv Suitable for use in open luminaires System Must be used in combination with a ballast and ignitor or electronic gear If there is a constant voltage deviation of more than % of the rated voltage, a different ballast rating/tap must be used A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) Electronic gear can be used and increases lamp-life, improves system efficacy and eliminates visible flicker /942 models can achieve optimal performance only with electronic ballast MASTERColour CDM-R 70W/942 E27 PAR0L 40D* E Shape MASTERColour CDM-R 5W/80 E27 PAR20 10D 4 MASTERColour CDM-R 5W/80 E27 PAR20 0D 4 MASTERColour CDM-R 5W/942 E27 PAR20L 10D* 71 MASTERColour CDM-R 5W/942 E27 PAR20L 0D* 71 MASTERColour CDM-R 5W/80 E27 PAR0L 10D PAR PAR20 66 PAR20 66 PAR20 Intensity Beam Angle Beam Angle Operating Position Description Technical (cd) (º) 2000 Spot 7.5 Narrow Flood Spot 7.5 Flood PAR0L Spot 7.0 MASTERColour CDM-R 5W/80 E27 PAR0L 0D PAR0L 7400 Narrow Flood 25.0 MASTERColour CDM-R 70W/80 E27 PAR0L 10D PAR0L Spot 7.0 MASTERColour CDM-R 70W/80 E27 PAR0L 0D PAR0L 00 Narrow Flood 26.0 MASTERColour CDM-R 70W/80 E27 PAR0L 40D PAR0L 00 Flood 4.0 MASTERColour CDM-R 70W/942 E27 PAR0L 10D* PAR0L 6000 Spot 7.0 MASTERColour CDM-R 70W/942 E27 PAR0L 0D* PAR0L 1000 Narrow Flood 26.0 MASTERColour CDM-R 70W/942 E27 PAR0L 40D* PAR0L 00 Flood 4.0 Note: * Electronic ballast only. Overall length Diameter C D nom. nom. CDM-R PAR CDM-R PAR0L High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.17

10 MASTERColour CDM MASTERColour CDM-R MASTERColour CDM MASTERColour CDM-R Cap/ (sec) Re-ignition (min) Run-up % (min) Net Weight Per Piece (g) Photometric diagrams MASTERColour CDM-R 5W/80 PAR20 10D Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R 5W/80 E27 PAR20 10D CDMR5W80ES2010 MASTERColour CDM-R 5W/80 E27 PAR20 0D CDMR5W80ES200 MASTERColour CDM-R 5W/942 E27 PAR20L 10D* CDMR5W942ES2010 MASTERColour CDM-R 5W/942 E27 PAR20L 0D* CDMR5W942ES200 MASTERColour CDM-R 5W/80 E27 PAR0L 10D CDMR5W80ES0L10 MASTERColour CDM-R 5W/80 E27 PAR0L 0D CDMR5W80ES0L0 MASTERColour CDM-R 70W/80 E27 PAR0L 10D CDMR70W80ES0L10 MASTERColour CDM-R 70W/80 E27 PAR0L 0D CDMR70W80ES0L0 MASTERColour CDM-R 70W/80 E27 PAR0L 40D CDMR70W80ES0L40 MASTERColour CDM-R 70W/942 E27 PAR0L 10D* CDMR70W942ES0L10 MASTERColour CDM-R 70W/942 E27 PAR0L 0D* MASTERColour CDM-R 70W/942 E27 PAR0L 40D* CDMR70W942ES0L CDMR70W942ES0L40 MASTERColour CDM-R 5W/80 PAR20 0D Light distribution curves Beam diagram Accent diagram CDM-R /80 CDM-R /942 MASTERColour CDM-R 5W/942 PAR20 10D Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R /80 MASTERColour CDM-R /942 performance during run up performance during run up MASTERColour CDM-R 5W/942 PAR20 0D Light distribution curves Beam diagram Accent diagram l la = current Φ = Flux V la = W la = l la = current Φ = Flux V la = W la = 2.18 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.19

11 MASTERColour CDM MASTERColour CDM-R MASTERColour CDM MASTERColour CDM-R MASTERColour CDM-R 5W/80 PAR0L 10D MASTERColour CDM-R 70W/80 PAR0L 40D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R 5W/80 PAR0L 0D MASTERColour CDM-R 70W/942 PAR0L 10D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R 70W/80 PAR0L 10D MASTERColour CDM-R 70W/942 PAR0L 0D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R 70W/80 PAR0L 0D MASTERColour CDM-R 70W/942 PAR0L 40D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram 2.20 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.21

12 MASTERColour CDM MASTERColour CDM-R111 MASTERColour CDM MASTERColour CDM-R111 The MASTERColour CDM-R111 combines the trendy look of 111mm aluminium reflector halogen lamps with the long life, high energy efficiency and crisp white light of MASTERColour CDM Features High lamp efficacy Long lamp life time compared to incandescent and halogen lamps The ceramic discharge tube is optimally positioned in the reflector Twist & Lock system UV-Block burner capsule Anti-glare cap design MASTERColour CDM-R111 5W/80 10D 8 MASTERColour CDM-R111 5W/80 24D 8 MASTERColour CDM-R111 5W/80 40D 8 MASTERColour CDM-R111 70W/80 10D* 7 MASTERColour CDM-R111 70W/80 24D* 7 MASTERColour CDM-R111 70W/80 40D* MASTERColour CDM-R111 20W/80 10D* System Power Mains Stable Operation min. Cap/ (k) G G G G G G G CDM-R111 Benefits Low operating costs Easy installation Relatively low heat output Less glare, comfort for shoppers and staff Reduced fading risks MASTERColour CDM-R111 5W/80 10D MASTERColour CDM-R111 5W/80 24D MASTERColour CDM-R111 5W/80 40D Reflector Reflector Reflector Intensity (cd) Beam Angle Description Spot Narrow Flood Flood Beam Angle Technical min. (º) Accent and decorative lighting: display lighting with sparkling, theatrical effects, even in surroundings with very high background ambient light levels like shops windows General lighting: in downlighters, a warm, comfortable atmosphere can be created Luminaires Standard 111mm reflector design increases flexibility in application and allows CDM-R111 to be easily fixed into the many existing 111 luminaires Simplified luminaire design because CDM-R111 lamps can be used in open luminaires G8.5 lamp connector used must be suitable for ignition peaks up to 5kV MASTERColour CDM-R111 70W/80 10D* MASTERColour CDM-R111 70W/80 24D* MASTERColour CDM-R111 70W/80 40D* MASTERColour CDM-R111 20W/80 10D* MASTERColour CDM-R111 5W/80 10D MASTERColour CDM-R111 5W/80 24D MASTERColour CDM-R111 5W/80 40D MASTERColour CDM-R111 70W/80 10D* MASTERColour CDM-R111 70W/80 24D* MASTERColour CDM-R111 70W/80 40D* MASTERColour CDM-R111 20W/80 10D* Operating Position Reflector Reflector 0 1 Spot Narrow Flood Reflector 00 Flood Reflector Spot 10 (sec) Re-ignition (min) Run-up % (min) Net Weight Per Piece (g) CDMR11W10 CDMR11W24 CDMR11W40 CDMR11170W10 CDMR11170W CDMR11170W CDMR11120W10 System Must be used in combination with a ballast and ignitor or electronic gear If there is a constant voltage deviation of more than % of the rated voltage, a different ballast rating/tap must be used A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) Electronic gear can be used and increases lamp-life, improves system efficacy and eliminates visible flicker 70W models can achieved optimal performance only with electronic ballast Note: * Electronic ballast only. ** CDM-R111 20W/80 24D will be launched in Q CDM-R111 /80 MASTERColour CDM-R111 /80 performance during run up Overall length Diameter C D 20W W W l la = current Φ = Flux V la = W la = 2.22 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.2

13 MASTERColour CDM MASTERColour CDM-R111 MASTERColour CDM MASTERColour CDM-R111 Photometric diagrams MASTERColour CDM-R111 5W/80 10D MASTERColour CDM-R111 70W/80 10D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R111 5W/80 24D CDM-R111 5W 40D MASTERColour CDM-R111 70W/80 24D CDM-R111 5W 40D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R111 5W/80 40D MASTERColour CDM-R111 70W/80 40D Light distribution curves Beam diagram Accent diagram Light distribution curves Beam diagram Accent diagram MASTERColour CDM-R111 20W/80 10D Beam diagram Accent diagram VBA 2 x 6 1 / 2Imax 2 x 5 h E0 d(m) h(m) (m) (lx) VBA 1 /2Imax K (m) m 2m m 4m E h (lx) 2.24 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.25

14 MASTERColour CDM MASTERColour CDM-EP MASTERColour CDM MASTERColour CDM-EP MHC P E27 ED17 CL Range of protected, high-efficiency long life ceramic metal halide lamps with a stable color over lifetime and a crisp, sparkling light to be used in open fixtures. Features Benefits Excellent color rendering(ra ). Superior color stability over life within K. to lamp color consistency over life. Higher lumen maintenance than standard metal halide. Pleasant cool white light (Tc=4000K) High lamp efficacy (up to 9 lumens per watt) for energy saving and low heat. Universal operating position; suitable for open fixtures. Fade Block for reduced fading risks. No shut off required in 24-hour-a-day/7-day-a-week operations (relamp fixtures at or before the end of rated life). Long lamp life compared to quartz metal halide lamps. UV-filter outerbulb Direct retrofit MH-NaSc low wattage Rated Cap MASTERColour CDM 70W/940 E27 P CL ALTO+FB E MASTERColour CDM 70W/940 E27 P CO ALTO+FB 1SL E MASTERColour CDM W/940 E27 CL ALTO+FB 1SL E MASTERColour CDM W/940 E27 P CO ALTO+FB E MASTERColour CDM 0W/940 E27 P CL ALTO+FB E MASTERColour CDM 0W/940 E27 P CO 1SL E Operating Flux Position min. (sec) MASTERColour CDM 70W/940 E27 P CL ALTO+FB MASTERColour CDM 70W/940 E27 P CO ALTO+FB 1SL MASTERColour CDM W/940 E27 CL ALTO+FB 1SL MASTERColour CDM W/940 E27 P CO ALTO+FB MASTERColour CDM 0W/940 E27 P CL ALTO+FB MASTERColour CDM 0W/940 E27 P CO 1SL MHC P E27 ED17 CO s Indoor-medium bay down light for industrial, public space and shop lighting MASTERColour CDM 70W/940 E27 P CL ALTO+FB MASTERColour CDM 70W/940 E27 P CO ALTO+FB 1SL MASTERColour CDM W/940 E27 CL ALTO+FB 1SL MASTERColour CDM W/940 E27 P CO ALTO+FB MASTERColour CDM 0W/940 E27 P CL ALTO+FB MASTERColour CDM 0W/940 E27 P CO 1SL Re-ignition (min) Run-up % (min) Cap Nett Weight In Grams CDMEP70W940ESCL CDMEP70W940ESCO CDMEPW940ESCL CDMEPW940ESCO CDMEP0W940ESCL CDMEP0W940ESCO CDM-EP /940 CL MASTERColour CDM-EP /940 normal white performance during run up O D C Overall Diameter Light center Arc length length length C D L O nom. nom. 70W CL W CL W CL Relative energy Wavelength (Nanometers) l la = current Φ = Flux V la = W la = L 2.26 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.27

15 MASTER City white MASTERColour CDM-ET MASTER City white MASTERColour CDM-ET High-intensity discharge lamps with a CDM discharge tube inside a SON lamp white coated elliptical outer bulb Feature Robust lamp giving a pleasant white light and a stable color over lifetime Good color rendering Dimming not recommended because of negative effects on lamp performance (lumen maintenance, color and life) MASTERColour City CDM-ET 70W/80 E27 MASTERColour City CDM-ET 0W/80 E40 EM Mains Stable Operation Cap E E Flux EM (lm/w) Operating Position Benefit Runs on SON gear so directly replaces equivalent wattage SON lamp for simple upgrade from yellow to white light MASTERColour City CDM-ET 70W/80 E27 MASTERColour City CDM-ET 0W/80 E CDM-ET E40 Road lighting: residential areas, city centres, shopping centres and pedestrian areas City beautification: decorative lighting and floodlighting MASTERColour City CDM-ET 70W/80 E27 MASTERColour City CDM-ET 0W/80 E40 Peak 2500 Cap Nett Weight In Grams CDMET70W80 CDMET0W80 Luminaires In the highly unlikely event of lamp breakage by incorrect use, vandalism or end of life effects, the luminaire housing should be able to contain heated glass, metal and/or ceramic particles System Must be used in combination with a ballast and an ignitor Must be used with a SON ballast and SON ignitor in accordance with SON IEC standards (ignition pulse between 1.8 kv and 2.5 kv for 70W) For optimum lamp performance, the mains voltage may deviate by +6/-8% from the voltage indicated on the type plate Warm restart time can be up to minutes. if the lamp does not start (e.g. with T5 ignitors), the installation must be switched off for minutes Overall length Diameter C D 70W W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.29

16 MASTER City white MASTERColour CDM-TT MASTER City white MASTERColour CDM-TT High-intensity discharge lamps with a CDM discharge tube inside a SON lamp clear tubular outer bulb Feature Robust lamp giving a pleasant white light and a stable color over lifetime Good color rendering Dimming not recommended because of negative effects on lamp performance (lumen maintenance, color and life) EM Mains Stable Operation Cap MASTERColour City CDM-TT 70W/80 E27 72 E MASTERColour City CDM-TT 70W/942 E27 7 E MASTERColour City CDM-TT 0W/80 E E MASTERColour City CDM-TT 250W/840 E E MASTERColour City CDM-TT 400W/840 E E MASTERColour City CDM-TT 0W/942 E E Benefit Runs on SON gear so directly replaces equivalent wattage SON lamp for simple upgrade from yellow to white light Flux EM (lm/w) Operating Position CDM-TT 0W E40 City centres, shopping centres and pedestrian areas, residential areas, road lighting City beautification: decorative lighting and floodlighting MASTERColour City CDM-TT 70W/80 E27 MASTERColour City CDM-TT 70W/942 E27 MASTERColour City CDM-TT 0W/80 E40 MASTERColour City CDM-TT 250W/840 E40 MASTERColour City CDM-TT 400W/840 E40 MASTERColour City CDM-TT 0W/942 E Luminaires In the highly unlikely event of lamp breakage by incorrect use, vandalism or end of life effects, the luminaire housing should be able to contain heated glass, metal and/or ceramic particles 250W and 400W protected version which allow to use open luminaires System Must be used in combination with a ballast and an ignitor Must be used with a SON ballast and SON ignitor in accordance with SON IEC standards (ignition pulse between 1.8 kv and 2.5 kv for 70W) For optimum lamp performance, the mains voltage may deviate by +6/-8% from the voltage indicated on the type plate Warm restart time can be up to minutes. if the lamp does not start (e.g. with T5 ignitors), the installation must be switched off for minutes Overall Diameter Light center Arc length length length C D L O nom. nom. 70W W W W MASTERColour City CDM-TT 70W/80 E27 MASTERColour City CDM-TT 70W/942 E27 MASTERColour City CDM-TT 0W/80 E40 MASTERColour City CDM-TT 250W/840 E40 MASTERColour City CDM-TT 400W/840 E40 MASTERColour City CDM-TT 0W/942 E40 CDM-TT / W per 5 nm per lm Peak Cap- Nett Weight In Grams CDMTT70W CDMTT70W942 5 CDMTT0W CDMTT250W CDMTT400W840 CDMTT0W942 nm MASTERColour CDM-TT / 840 normal white performance during run up V la l la W la l la = current Φ = Flux V la = W la = V la l la W la 2.0 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.1

17 MASTER City white MASTER CosmoPolis CPO-T White MASTER City white MASTER CosmoPolis CPO-T White CPO-TW 140W PGZ12 Desription New-generation ceramic metal halide lamps for outdoor lighting with white light, using a new lamp base and clear quartz outer bulb Features Extreme high energy efficiency Unique new burner design and positioning in combination with best lamp fixation (PGZ12) Compact size: 50% smaller than SON/HPL systems New electronic gear platform meets the most demanding public lighting requirements Benefits Attractive white light Best optical efficacy allows greater spacing between luminaires, thereby reducing investment Highest energy saving and lowest cost of ownership Lower our energy cost with 10-0% compared with todays lightsources for outdoor applications Compact size & unique burnershape allows optimized optic and luminaire design Optimal lamp service lifetime and energy savings initially and over lifetime Robust, dedicated outdoor electronic treme gear for long and reliable operation, ensuring future-proof outdoor installation lamp for simple upgrade from yellow to white light Rated EM MASTER Cosmo CPO-T White 60W/728 PGZ MASTER Cosmo CPO-T White 140W/728 PGZ MASTER Cosmo CPO-T White 60W/728 PGZ MASTER Cosmo CPO-T White 140W/728 PGZ Cap- MASTER Cosmo CPO-T White 60W/728 PGZ MASTER Cosmo CPO-T White 140W/728 PGZ Mains Stable Operation Flux Peak Nett Weight In Grams Cap PGZ PGZ EM (lm/w) CPOTWHITE60W728 CPOTWHITE140W728 Urban Public Lighting for city centers, residential areas and roads System Designed for use with electronic gear only s and gear developed together to ensure optimal system operation for: Lowest system energy initially and over lifetime Robust, long-life outdoor-proof installation (lightning strike and peak voltage protection) Overall length Width Light center length C D L 60W W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.

18 SDW White Son SDW-T White Son SDW White Son SDW-T White Son SDW-T W PG12-1 Range of high-efficiency, discharge lamps with warm color to be used in open luminairs Features Warm white color impression, very good color rendering, especially superb red rendition design is well-suited to be used in luminairs for power-spots (high intensity) and high-bay general lighting Benefits Exceptional brightness and color rendering especially of warm colors, e.g. red and gold High lamp efficacy results in low operating costs and low heat generation Long lamp life compared with incandescent and halogen lamps Shop lighting (create cosy atmosphere e.g. in furniture shops), excellent display of fresh goods (at butchers, bakeries, flowershops) and decorative outdoor lighting (gas-lantern imitation) Cap/ MASTER SDW-T 5W/825 PG12-1 SLV PG MASTER SDW-T 50W/825 PG12-1 SLV PG MASTER SDW-T W/825 PG12-1 SLV PG MASTER SDW-T 5W/825 PG12-1 SLV MASTER SDW-T 50W/825 PG12-1 SLV MASTER SDW-T W/825 PG12-1 SLV MASTER SDW-T 5W/825 PG12-1 SLV MASTER SDW-T 50W/825 PG12-1 SLV MASTER SDW-T W/825 PG12-1 SLV Peak Cap/ Flux Net Weight 5 5 Operating Position (lm/w) SDWT5W825 SDWT50W825 SDWTW825 System Must be used in combination with a ballast and a special Philips color control unit (CSLS) to avoid color shift. Not designed to be used in combination with electronic gear A high-current protection device (thermo-switch) in the gear is mandatory (IEC 61167) SDW-T 50W MASTERColour SDW-T performance during run up l la = current Φ = Flux V la = W la = Overall Diameter Light center Arc length length length C D L O nom. nom. 5W W W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.5

19 SDW White Son SDW-TG Mini White Son SDW White Son SDW-TG Mini White Son Range of high-efficiency, discharge lamps with warm color to be used in small, open luminairs designed around MASTERColour CDM-T lamps System Power Cap Features Warm white color impression, very good color rendering, especially superb red rendition design is well-suited to be used in luminairs for MASTERColour CDM-T power-spots UV-block for reducing fading risks MASTER SDW-TG 50W/825 G12-1 1CT 54 MASTER SDW-TG W/825 G12-1 1CT 99 MASTER SDW-TG 50W/825 G12-1 1CT Flux 2400 G G Operating Position Peak (lm/w) SDW-TG 50W G12-1 Benefits Exceptional brightness and color rendering especially of warm colors, e.g. red and gold High lamp efficacy results in low operating costs and low heat generation Long lamp life compared with incandescent and halogen lamps MASTER SDW-TG W/825 G12-1 1CT MASTER SDW-TG 50W/825 G12-1 1CT 469 (sec) Run-up % (min) 2 40 Cap Pinch Net Weight SDWTG50W Shop lighting (create cosy atmosphere e.g. in furniture shops), excellent display of fresh goods (at butchers, bakeries, flowershops) MASTER SDW-TG W/825 G12-1 1CT SDW-TG MASTERColour SDW-TG performance during run up 5 SDWTGW System Must be used in combination special Philips electronic gear to avoid color shift. Not designed to be used in combination with ballast and color control (CSLS) unit l la = current Φ = Flux V la = W la = Overall Diameter Light center Arc length length length C D L O nom. nom. 50W W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.7

20 MHN-TD Low wattage MHN-TD MHN-TD Low wattage MHN-TD MHN-TD R7s Doubled-ended lamps housed in a tubular clear UV-Block quartz evacuated outer envelop Benefits High lamp efficacy results in low operating costs and low heat generation Compact size for smaller luminaire Different ambiance by three color temperature (000K, 4200K and 5200K) Long life time compare to incandescent and halogen lamps UV-Block for reduced aging of plastic components in luminaires Shops and shop windows, offices and public buildings Decorative outdoor lighting, city beautification Billboard Luminaires It must be used in a luminare with a hard-glass cover to protect against possible discharge tube shattering Systems Must be used in combination with ballasts and ignitor is designed to operate on coventional SON system. For conventional gear, the lamp must only be used on SON 70W (reactor or constant wattage) ballast which comply with the lamp operating limits as defined in IEC The Mains voltage may only deviate by +6/-8% from the voltage indicated on the type plate. Operation of lamps beyond nominal line voltage and frequency for extended period of time (>25% of design life) can result in reduce lamp life. Warm restart time can be up to minutes. If the lamp does not start (e.g. with T5 ignitors). Cap MHN-TD 70W/ R x 7s MHN-TD 0W/ R x 7s MHN-TD 70W/ R x 7s MHN-TD 0W/ R x 7s MHN-TD 70W/ R x 7s MHN-TD 0W/ R x 7s MHN-TD Pro250W/ R x 7s MHN-TD 70W/70 MHN-TD 0W/70 MHN-TD 70W/842 MHN-TD 0W/842 MHN-TD 70W/852 MHN-TD 0W/852 MHN-TD Pro250W/842 MHN-TD 70W/70 MHN-TD 0W/70 MHN-TD 70W/842 MHN-TD 0W/842 MHN-TD 70W/852 MHN-TD 0W/852 MHN-TD Pro250W/842 MHN-TD 70/0W/70 [ W / (5nm. lm)] Flux Operating Position (Im) (Im) Horizontal +/- 45º Horizontal +/- 45º Horizontal +/- 45º Horizontal +/- 45º Horizontal +/- 45º Horizontal +/- 45º Horizontal +/- 45º Peak Cap- Permitted Net Weight MHNTD70W MHNTD0W MHNTD70W MHNTD0W MHNTD70W MHNTD0W MHNTD250W842 MHN-TD 70/0W/842 [ W / (5nm. lm)] [nm] [nm] Overall Diameter Light center Arc length length length C D L O B nom. nom. nom. 70W W W MHN-TD performance during run up % Ila 120 % Wla Vla 0 Φ t 95 Vla Ila 85 Φ Wla t l la = current W la = Φ = Flux V la = 2.8 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.9

21 MH/HPI Metal halide MHN-SA MH/HPI Metal halide MHN-SA MHN-SA (P)SFC MHN-SA 80R B A Compact quartz metal halide lamps with double-pinch Features Very compact source (Short Arc) with high luminous efficacy and superior color rendering Double-pinch concept results in long lifetime Natural white color appearance, high color rendering and good color stability Daylight color temperature eases transition from daylight to artificial lighting Benefits Allows compact and very efficient luminaire systems with high precision optics for good beam control and minimal spill light Very good color rendering creates a pleasant ambience with high visual comfort for players and spectators Continuous spectral distribution offers a superior solution for (semi-) professional stadiums with regular TV coverage Professional sports lighting and floodlighting Luminaires MHN-SA lamps require UV-absorbing and protective front glass and correct thermal behaviour for optimal lamp performance Main Cap/ MASTER MHN-SA 1800W/956 (P)SFC 20V (P)SFC 5600 MASTER MHN-SA 1800W/956 80R 20V R 5600 MASTER MHN-SA 1800W/956 (P)SFC 400V (P)SFC 5600 MASTER MHN-SA 2000W/956 80R 400V R 5600 MASTER MHN-SA 1800W/956 (P)SFC 20V 0 9 Flux (Im) (Im) 86 Luminance Average EM (cd/cm 2 ) 6500 MASTER MHN-SA 1800W/956 80R 20V MASTER MHN-SA 1800W/956 (P)SFC 400V MASTER MHN-SA 2000W/956 80R 400V MASTER MHN-SA 1800W/956 (P)SFC 20V MASTER MHN-SA 1800W/956 80R 20V MASTER MHN-SA 1800W/956 (P)SFC 400V MASTER MHN-SA 2000W/956 80R 400V Operating Position P P P P min Pinch Net Weight Per Piece (g) MHNSA1800W20V956P MHNSA1800W20V956 MHNSA1800W400V956P MHNSA2000W400V956 MHN-SA 1800W MHN-SA 2000W W/nm 8 W/nm [nm] [nm] A MASTER MHN-SA performance during run up The allowed burning position A O B D Overall Overall Diameter Arc length length length A C D O nom. nom. nom. 1800W/80R W/80R W (P) SFC l la = current Φ = Flux V la = W la = 2.40 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.41

22 MH/HPI Metal halide MHN-LA MH/HPI Metal halide MHN-LA MHN-LA 0W A Compact quartz metal halide lamps with double-pinch Features Compact source (Long Arc) with high luminous efficacy Double-pinch concept results in long lifetime Natural white color appearance, high color rendering and good color stability Daylight color temperature eases transition from daylight to artificial lighting Benefits Allows compact and efficient luminaire systems with precision optics for good beam control and minimal spill light Good color rendering creates a pleasant ambience with high visual comfort for players and spectators Continuous spectral distribution offers options for semiprofessional stadiums and for professional stadiums with regular TV coverage Professional and semi-professional sports lighting and floodlighting Main Cap/ MASTER MHN-LA 0W/842 20V Cable MASTER MHN-LA 0W/956 20V Cable 5600 MASTER MHN-LA 2000W/ V Cable MASTER MHN-LA 2000W/ V Cable 5600 Flux (Im) (Im) Luminance Average EM (cd/cm 2 ) MASTER MHN-LA 0W/842 20V MASTER MHN-LA 0W/956 20V MASTER MHN-LA 2000W/ V MASTER MHN-LA 2000W/ V MASTER MHN-LA 0W/842 20V MASTER MHN-LA 0W/956 20V MASTER MHN-LA 2000W/ V MASTER MHN-LA 2000W/ V Operating Position P5 P5 P5 P5 min Pinch Net Weight Per Piece (g) MHNLA0W20V842 MHNLA0W20V956 MHNLA2000W400V842 MHNLA2000W400V956 MHN-LA 2000W B Luminaires MHN-LA lamps require UV-absorbing and protective front glass and correct thermal behaviour for optimal lamp performance MHN-LA /842 MHN-LA /956 MHN-LA /842 MHN-LA /956 Overall Diameter Arc length length A D O nom. nom. 0W W MASTER MHN-LA performance during run up l la = current Φ = Flux V la = W la = The allowed burning position 2.42 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.4

23 MH/HPI Metal halide MHN-SB MH/HPI Metal halide MHN-SB Compact quartz metal halide lamp with single pinch Features Compact source (Short lamp dimensions) with short electrode distance and high luminous efficacy Single pinch concept with long lifetime Natural white color appearance, good color rendering and stability Daylight color temperature eases transition from daylight to artificial lighting Main Cap/ MHN-SB Pro 2000W/956 Cable 400V Cable 5600 Luminance Flux Average EM (Im) (Im) (cd/cm 2 ) MHN-SB Pro 2000W/956 Cable 400V MHN-SB Benefits Allows compact and efficient luminaire systems with precision optics for good beam control and minimal light spill Long lifetime and high reliability in Short outer dimensions to minimise service needs and maintenance costs Good color rendering for a pleasant ambience with high visual comfort Professional and semi-professional sports, area and floodlighting MHN-SB Pro 2000W/956 Cable 400V MHN-SB /956 Operating Position P min Pinch 420 MHN-SB performance during run up Net Weight Per Piece (g) 110 MHNSB2000W400V956 Luminaires Requires UV-absorbing and protective front glass Correct thermal conditions are required for optimal lamp performance The allowed burning position l la = current Φ = Flux V la = W la = Overall Diameter Arc length length A C D O nom. nom. nom. 2000W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.45

24 MH/HPI Metal halide HPI-T High MH/HPI Metal halide HPI-T High Quartz metal halide lamps with clear outer bulb Feature tubular outer bulb Unique -band technology resulting in high luminous efficacy, both initially and over long lifetime Renders a natural white color appearance and good color stability HPI-T 0W/64 E40 SLV HPI-T 0W/64 E40 SLV HPI-T 2000W/642 E40 80V CRP HPI-T 2000W/646 E40 220V CRP Rated Mains Stable Operation Cap E40 E40 E40 E40 Benefit High safety and comfort level, maintained over life Minimal maintenance cost Flux (lm/w) HPI-T 2000W Sports lighting, floodlighting of buildings and monuments, area lighting e.g. harbours and building sites HPI-T 0W/64 E40 SLV HPI-T 0W/64 E40 SLV HPI-T 2000W/642 E40 80V CRP HPI-T 2000W/646 E40 220V CRP Luminaires HPI-T Pro lamps require a protective front glass Peak min. Cap- Nett Weight In Grams HPI-T 0W/64 E40 SLV HPIT0WGES HPI-T 0W/64 E40 SLV HPIT0WGES HPI-T 2000W/642 E40 80V CRP HPIT2000W64280V HPI-T 2000W/646 E40 220V CRP HPIT2000W646220V HPI-T 0W HPI-T performance during run up Overall Diameter Light center Arc length length length C D L O nom. nom. 0W W/80V W/220V l la = current Φ = Flux V la = W la = 2.46 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.47

25 MH/HPI Metal halide HPI-T Plus MH/HPI Metal halide HPI-T Plus Quartz metal halide lamps with clear outer bulb Feature tubular outer bulb Unique -band technology resulting in high luminous efficacy, both initially and over long lifetime Renders a natural white color appearance and good color stability Benefits High safety and comfort level, maintained over life Minimal maintenance cost Initial investment saving options with "Plus"-concept MASTER HPI-T Plus 250W/645 E40 SLV MASTER HPI-T Plus 400W/645 E40 SLV MASTER HPI-T Plus 250W/645 E40 SLV MASTER HPI-T Plus 400W/645 E40 SLV Rated / / Mains Cap Stable Operation HPL system 128 E E Flux Run-Up HPL/SON (lm/w) / / HPI-T Sports lighting. floodlighting of buildings and monuments, area lighting e.g. harbours and building sites, canopy lighting e.g. petrol stations, horticultural lighting MASTER HPI-T Plus 250W/645 E40 SLV Peak HPL/SON 750 min. Cap Nett Weight In Grams 180 HPITPLUS250WGES Luminaires HPI-T Plus lamps require a protective front glass System Can be run on HPI-gear as well as on SON-gear ("Plus"-concept). The results in both light output and color temperature are different. MASTER HPI-T Plus 400W/645 E40 SLV HPI-T Plus HPI-T Plus performance during run up % Ila 185 HPITPLUS400WGES 80 Wla 40 0 Vla Φ l la = current Φ = Flux V la = W la = 5 t Overall Diameter Light center Arc length length length C D L O nom. nom. 250W W High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.49

26 MH/HPI Metal halide HPI Plus MH/HPI Metal halide HPI Plus Quartz metal halide lamps with opalized outer bulb Feature Ovoid, internally white coated outer bulb Unique -band technology resulting in high luminous efficacy, both initially and over long lifetime Available in cool white and daylight color appearance demonstrating good color stability "S"-type for direct retrofit for HPL lamps "P"-type for use without protective front shield MASTER HPI Plus 250W/745 BU E40 SLV MASTER HPI Plus 250W/745 BU-P E40 CRP MASTER HPI Plus 250W/767 BU E40 CRP MASTER HPI Plus 400W/745 BU E40 SLV MASTER HPI Plus 400W/745 BU-P E40 CRP MASTER HPI Plus 400W/745 BUS E40 SLV MASTER HPI Plus 400W/745 HOR E40 CRP MASTER HPI Plus 400W/767 BU E40 CRP MASTER HPI Plus 400W/745 BUS-P E40 CRP Rated Mains Stable Operation Cap HPL/SON E / E / E / E / E / E / E / E / E / HPI Benefit High safety and comfort level, maintained over life Minimal maintenance cost Initial investment saving options with "Plus"-concept and "S" and "P"-types Adjustable atmosphere creation by using appropriate color temperature MASTER HPI Plus 250W/745 BU E40 SLV MASTER HPI Plus 250W/745 BU-P E40 CRP MASTER HPI Plus 250W/767 BU E40 CRP Flux HPL/SON / / / EM (lm/w) Run-Up High bay lighting, e.g. industrial workshops, exhibition halls, hypermarkets, shopping malls, DI stores, churches, airports and train stations MASTER HPI Plus 400W/745 BU E40 SLV MASTER HPI Plus 400W/745 BU-P E40 CRP MASTER HPI Plus 400W/745 BUS E40 SLV MASTER HPI Plus 400W/745 HOR E40 CRP MASTER HPI Plus 400W/767 BU E40 CRP MASTER HPI Plus 400W/745 BUS-P E40 CRP / / / / / / Luminaires HPI Plus BU-P and BUS-P suitable for use in open luminaires For other HPI Plus lamps a protective front glass is required Peak HPL/SON Cap- Nett Weight In Grams System Can be run on HPI-gear as well as on SON-gear ("Plus"-concept). The results in both light output and color temperature are different HPI Plus BUS and BUS-P types require an HPL-ballast and no ignitor MASTER HPI Plus 250W/745 BU E40 SLV MASTER HPI Plus 250W/745 BU-P E40 CRP MASTER HPI Plus 250W/767 BU E40 CRP MASTER HPI Plus 400W/745 BU E40 SLV MASTER HPI Plus 400W/745 BU-P E40 CRP MASTER HPI Plus 400W/745 BUS E40 SLV MASTER HPI Plus 400W/745 HOR E40 CRP MASTER HPI Plus 400W/767 BU E40 CRP 750/ 750/ 750/ 750/ 750/ NA 750/ 750/ HPIPLUS250WBUGES HPIPLUS250WBUSPGES HPIPLUS250W767BU HPIPLUS400WBUGES HPIPLUS400WBUPGES HPIPLUS400WBUSGES HPIPLUS400WHORGES HPIPLUS400W767BU MASTER HPI Plus 400W/745 BUS-P E40 CRP NA HPIPLUS400WBUSPGES Overall length Diameter C D 250W W HPI Plus [mw/(m 2. 5nm. 0 lux)] [nm] HPI Plus performance during run up % Ila Wla Vla Φ t % Vla Ila 85 Wla Φ Relative supply voltage in % l la = current Φ = Flux V la = W la = 2.50 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.51

27 MH/HPI Metal halide MH-T Artcolour MH/HPI Metal halide MH-T Artcolour Single-ended Metal Halide lamp emitting variant colors (Red,Violet, Blue and Green) consisting a quartz discharge tube, and a clear tubular gas-filled glass bulb. Rated Cap Feature Quartz discharge tube containing high-pressure mercury, and mixture of certain metal halides (Thallium, Indium, Sodium, Lithium), which contributes to different color. There are four colors available Red, Green,Violet and Blue. Relatively higher lumen efficacy than other lamps with expensive filter. Tubular clear glass bulb. Burning position horizontal +/- 20º. Artcolour MH-T 400W Blue E40 SLV E40 Artcolour MH-T 400W Green E40 SLV E40 Artcolour MH-T 400W Red E40 SLV E40 Artcolour MH-T 400W Violet E40 SLV E40 Flux Run-Up min. Artcolour MH-T 400W Blue E40 SLV 00.4 Artcolour MH-T 400W Green E40 SLV Nett Weight In Grams MHTBU400WGES MHTGR400WGES MH-T Benefit Ideal cost and energy saving solution for color flood lighting Specially designed to retrofit with HPI to directly replace from normal white to color flood lighting Artcolour MH-T 400W Red E40 SLV Artcolour MH-T 400W Violet E40 SLV MH-T Blue MH-T Green MHTRE400WGES MHTVI400WGES Decorative flood lighting buildings (hotels, pavilions), landmarks (statues towers, monuments), parks, tourist resorts Multi-functional lighting promotional lighting, seasonal lighting, event lighting (festivals, Christmas). Intensity 2 1 Intensity Luminaires MH-T lamps must be used in a luminaire with a hard-glass cover to protect against possible discharge tube shattering MH-T Violet 4 Intensity 700 [nm] [nm] [nm] MASTER MHN-SA performance during run up Overall Diameter Light center Arc length length length C D L O nom. nom. 400W % Wla 40 0 Ila Vla Φ t % Vla 95 Ila 85 Wla 75 Φ Relative supply voltage in % l la = current Φ = Flux V la = W la = 2.52 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.5

28 MH/HPI Metal halide MH-NaSc MH/HPI Metal halide MH-NaSc Sodium Scandium Metal Halide s consisting of a gas-filled glass bulb, which alternatively are clear or internal coated, and a quartz discharge tube (DT). Rated Mains Stable Operation Cap MH E26/E27 CL Feature Quartz discharge tube containing high-pressure mercury and a mixture of Sodium and Scandium halides, which contribute to multi-lines spectra; with Ar to aid ignition. Better color rendering index around 60 efficacy up to lm/w Low wattage lamps with extra quartz tube around DT to prevent the risk of outer bulb shattering when abnormal operated or to the end of life. Universal operation position permitted Benefit Energy saving solution with better color appearance and rendering property for conventional version. MH 70W/640 E27 CL SLV MH 70W/640 E27 P CL SLV MH W/640 E27 CL SLV MH W/640 E27 P CL SLV MH 0W/640 E27 CL SLV 0 0 MH 175W/67 E40 CO U SLV MH 175W/640 E40 CL U SLV MH 250W/67 E40 CO U SLV MH 250W/640 E40 CL U SLV MH 400W/67 E40 CO U SLV MH 400W/640 E40 CL U SLV MH 70W/640 E27 CL SLV E E E E E E E E E E E Flux Run-Up (lm/w) MH 70W/640 E27 P CL SLV MH E40 CO Stadium and sports facilities lighting Industrial and commercial lighting factory, supermarket and exhibition hall etc. Public lighting square, station, port, airport etc. Decorative flood lighting monument, buildings e.g. hotel. MH W/640 E27 CL SLV MH W/640 E27 P CL SLV MH 0W/640 E27 CL SLV MH 175W/67 E40 CO U SLV MH 175W/640 E40 CL U SLV MH 250W/67 E40 CO U SLV MH 250W/640 E40 CL U SLV MH 400W/67 E40 CO U SLV Luminaires MH 400W/640 E40 CL U SLV MH-NaSc must be used in a luminaire with a hard-glass cover to protect against possible discharge tube shattering Protected structure of low wattage lamps allows lower Luminaires protection level. Peak min. Cap- Nett Weight In Grams MH 70W/640 E27 CL SLV MH70WES MH 70W/640 E27 P CL SLV MH70WPES MH W/640 E27 CL SLV MHWES MH W/640 E27 P CL SLV MHWPES MH 0W/640 E27 CL SLV MH0WES MH 175W/67 E40 CO U SLV MH175WUGESCO MH 175W/640 E40 CL U SLV MH175WUGES MH 250W/67 E40 CO U SLV MH250WUGESCO MH 250W/640 E40 CL U SLV MH250WUGES Overall length Width Light center length C D L nom. 70W/W/0W W W W MH 400W/67 E40 CO U SLV MH 400W/640 E40 CL U SLV MH400WUGESCO MH400WUGES 2.54 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.55

29 MH/HPI Metal halide MH-NaSc MH/HPI Metal halide MH 70/0W MH 175/400W MH 70/0W performance during run up Run-up P lamp U lamp I lamp (Sec) Vla Ila Lm l la = current Φ = Flux V la = W la = 2.56 High intensity discharge lamps s and Gear s and Gear High intensity discharge lamps 2.57