Chemglass Life Sciences

Transcription

1 Chemglass Life Sciences Equipment, Glass and Consumables for Cell and Tissue Culture, Standard & Chemistry Laboratories Product List 2016 Dunn Labortechnik GmbH Thelenberg Asbach Tel. +49 (0) / Fax +49 (0) / info@dunnlab.de Internet:

2 Index Page Adapter for Overhead Drive 13 Aluminum Seals 25 Anaerobic Culture Tubes and Bottles with Aluminum Seals Aseptic Filling Bell 23 Bags for Cell Culture 31 Balch Culture Tubes (Anaerobic) 25 BioProcess Spinner Flasks and Accessories 4-9 Bio Reactor Vessels and Accessories BioVortexer, Homogenizer Motor and Pestle 30 Bottles Anaerobic 26 Hybridization Bottles 23 Roller Bottles, Glass and Polystyrene 36 Roux Culture Bottles 19 Spinner Flasks und Accessories 4-9 Transfer-Medium Bottles 19 Caps and Closures (Stainless Steel, Polypropylene, Silicone Sponge, Vented) Carriers for Spinner Flasks or Bioreactor Vessels 13 Cell Culture Bags 31 Cell Spreader (Drigalski) 26 Centrifuge Tubes 22, 24 Cloning Cylinders 24 Closures and Caps (Stainless Steel, Polypropylene, Silicone Sponge, Vented) Counting Chamber 24 Cover Slips, round or rectangular, German Glass 27 Crimper for Aluminum Seals 26 Culture and Shake Flasks Decapper for Aluminum Seals 26 Disposable Cell Culture Bag WAVE Type 31 Dewar Flask, Foam 22 Dura-Drive Overhead Drive and Adapter 13 Dura-Mag Magnetic Stirrer, 2, 5 and 9 Positions 10 Dura-Drive, Overhead Drive, Adapter and Accessories 13, 29 Erlenmeyer and Fernbach Flasks Evaporator Adapter 22 Fernbach Culture Flask 15, 19 Gaskets 21 Glass Frit 12 Hemocytometer 24 Homogenizer BioVortexer, Motor and Pestles 30 Dounce 28 Cellector Homogenizer and Mesh Screens 30 Glass- or PTFE Pestles Griffiths Homogenizer 29 Potter-Elvehjem Homogenizer 28 Overhead Drive 29 Tenbroeck Pyrex Homogenizer 29 Hungate Culture Tubes (Anaerobic) 25 Hybridization Bottles 23 Incubators 35 Lab Armor TM Beads (Water and Ice Replacement) 27 Magnetic Stirrer (Dura-Mag ) for Spinner Flasks, 2-, 5- and 9-Positions 11 Membrane Cap 21 Orbital Shaker, Versa-Orb Overhead Drive, Adapters and 14, 29 2

3 Page Port Assembly Stainless Steel 7, 9, 11 Pouring Rings 21 Reaction Vials with Pressure Relief Cap 23 Reciprocating Shaker, Versa-Shake 33 Rocker, Versa-Rock 32 Roller Apparatus Versa Roll Roller Bottles, Glass und Polystyrene 36 Roux Culture Flasks 19 Sampling Vessel 12 Screw Caps, Solid or Open Top, with Membrane 20-21, 36 Shake Flasks, Glass and Polycarbonate Shakers Orbital and Mini-Orbital Reciprocating 33 Rockers 32 Silicone Sponge Closures 20 Siphon Assembly, Stainless Steel 9, 11 Sparger for Bioreactor Vessels 12 Spinner Flasks and Accessories 4-9 Spot Plate 24 Sticky Pads for Rocker and Shaker 33 Tissue Grinders Transfer Media Bottles 19 Trypsinizing Flasks 19 Tubes 22, 24 Universal Port Assembly for Sidearm 7 UV Lamp 34 Versa -Laboratory Equipment Series Vials 23 Water Jacketed Spinner Flask, BioProcess 7 Also in our programme: Glass for Chemistry, Research and Analytics Chemistry Labware CHEMGLASS AIRFREE MINUM-WARE PIE-BLOCK CHEM-CAP CHEM-STIR OPTICHEM CHEMVAC OPTITHERM Vials for Research and Industry Autosampler Vials and Closures Storage Vials Special-Vials and Accessories V-Vial for High Sample Recovery Crimp Vial and Caps Snap/Crimp Vial and Caps Crimping- and Decapping Tools Racks and Boxes For detailed information please contact us. 3

4 Spinner Flasks and Accessories Spinner Flasks, BioProcess For optimal growth of suspension cultures Flow dynamic impellers ensure optimal cell suspension even at low speeds Several models available: Height adjustable shaft, with or without impeller blade; internal impeller assembly Different bottom designs: Flat bottom, or dimpled bottom to prevent cell accumulation Complete includes bottle, impeller assembly, shaft and cap with gasket or pouring ring All parts autoclavable at 121 C Height is approximate, fully assembled Cat. No. Description Ø Central Ø Sidearm Ø x Height BioProcess Spinner Flask, Height Adjustable Shaft, Complete CLS ml, dimpled bottom 70 mm 32 mm 70 x 175 mm CLS ml, dimpled bottom 70 mm 32 mm 85 x 210 mm CLS ml, dimpled bottom 70 mm 45 mm 110 x 250 mm CLS L 1 l, dimpled bottom 100 mm 45 mm 135 x 305 mm CLS L 6 l, flat bottom 100 mm 45 mm CLS L 8 l, flat bottom 100 mm 45 mm BioProcess Spinner Flask, Flat Bottom, Height Adjustable Shaft, Complete CLS-1430-F ml, flat bottom 70 mm 32 mm 70 x 175 mm CLS-1430-F ml, flat bottom 70 mm 32 mm 85 x 210 mm CLS-1430-F ml, flat bottom 70 mm 45 mm 110 x 250 mm CLS-1430-F1L 1 l, flat bottom 100 mm 45 mm 135 x 305 mm CLS-1430-F3L 3 l, flat bottom 100 mm 45 mm 165 x 355 mm BioProcess Spinner Flask, Magnetic Stir Bar Only, Height Adjustable Shaft, Complete CLS ml, flat bottom 38 mm 18 mm 38 x 120 mm CLS ml, flat bottom 51 mm 18 mm 55 x 110 mm CLS ml, flat bottom 70 mm 32 mm 70 x 175 mm CLS ml, flat bottom 70 mm 32 mm 85 x 210 mm CLS ml, flat bottom 70 mm 45 mm 110 x 250 mm CLS L 1 l, flat bottom 100 mm 45 mm 135 x 305 mm CLS L 3 l, flat bottom 100 mm 45 mm 165 x 355 mm BioProcess Spinner Flask Internal Impeller Assembly, complete CLS ml, dimpled bottom 70 mm 32 mm 70 x 175 mm CLS ml, dimpled bottom 70 mm 32 mm 85 x 210 mm CLS ml, dimpled bottom 70 mm 45 mm 110 x 250 mm CLS L 1 l, dimpled bottom 100 mm 45 mm 135 x 305 mm CLS L 3 l, flat bottom 100 mm 45 mm 165 x 355 mm Replacement parts, impeller assemblies, shafts and caps see pages 5-6 4

5 Replacement Spinner Flasks Cat. No. Description Ø Central Ø Sidearm Ø x Height Replacement Glass Flask, Sidearm Caps only, without Impeller Assembly CLS ml, flat bottom 38 mm 18 mm 38 x 120 mm CLS ml, flat bottom 51 mm 18 mm 55 x 110 mm CLS ml, flat bottom 70 mm 45 mm 70 x 110 mm CLS ml, flat bottom 100 mm 45 mm 85 x 145 mm CLS ml, flat bottom 100 mm 45 mm 110 x 185 mm CLS L 1 l, flat bottom 100 mm 45 mm 135 x 240 mm CLS L 3 l, flat bottom 100 mm 45 mm 165 x 290 mm CLS L 6 l, flat bottom 100 mm 45 mm 204 x 410 mm CLS L 8 l, flat bottom 100 mm 45 mm 240 x 430 mm CLS L 15 l, flat bottom 100 mm 45 mm 295 x 460 mm CLS ml, dimpled bottom 70 mm 32 mm 70 x 110 mm CLS ml, dimpled bottom 100 mm 32 mm 85 x 145 mm CLS ml, dimpled bottom 100 mm 45 mm 110 x 185 mm CLS L 1 l, dimpled bottom 100 mm 45 mm 135 x 240 mm CLS L 3 l, dimpled bottom 100 mm 45 mm 165 x 290 mm CLS L 6 l, dimpled bottom 100 mm 45 mm 204 x 410 mm CLS L 8 l, dimpled bottom 100 mm 45 mm 240 x 430 mm Replacement Components for BioProcess Internal Impeller Spinner Flasks Complete stirring assembly includes: - top cap - silicone gasket - glass shaft - compression fitting - paddle - magnetic stir bar - magnet holder Impeller Assembly Glass Shaft Cat. No. Flask capacity Cat. No. Flask capacity CLS ml CLS ml CLS ml CLS ml CLS ml CLS ml CLS l CLS l CLS l CLS l 5

6 Replacement Components for BioProcess Spinner Flasks with Height Adjustable Shaft Impeller assembly includes: - Magnetic stir bar - Impeller blade - Blade holder Cap assembly includes - Screw cap - Liner - Compression fitting Cap Assembly CLS Cap assembly for 25 ml spinner flasks 1 CLS Cap assembly for 50 ml spinner flasks 1 CLS Cap assembly for 100, 250 and 500 ml BioProcess spinner flasks 1 CLS Cap assembly for 1 and 3 l BioProcess spinner flasks 1 CLS Cap assembly for 6, 8, 15 and 36 l BioProcess spinner flasks 1 Glass Shaft Only CLS Glass shaft for 25 ml, 50 ml, 100 ml and 250 ml spinner flasks, Ø 7 mm 1 CLS Glass shaft for 500 ml spinner flasks, Ø 7 mm 1 CLS Glass shaft for 1 l spinner flasks, Ø 7 mm 1 CLS Glass shaft for 3 l spinner flasks, Ø 7 mm 1 CLS Glass shaft for 6 l, 8 l und 15 l spinner flasks, Ø 9 mm 1 CLS Glass shaft for 36 l spinner flasks, Ø 9 mm 1 CLS H Glass shaft for 1 l spinner flasks CLS-1445 series, Ø 7 mm, CLS-1445 series 1 CLS H Glass shaft for 3 l spinner flasks CLS-1445 series, Ø 7 mm, CLS-1445 series 1 Impeller Assembly CLS Impeller assembly for 25 ml spinner flasks, CLS-1445 series 1 CLS Impeller assembly for 50 ml spinner flasks, CLS-1445 series 1 CLS Impeller assembly for ml BioProcess spinner flasks 1 CLS Impeller assembly for 500 ml BioProcess spinner flasks 1 CLS Impeller assembly for 1 3 l BioProcess spinner flasks 1 CLS Impeller assembly for 6 8 l BioProcess spinner flasks 1 Replacement Gaskets CLS Silicone gasket, for 25 ml spinner flask, 38 mm central cap, white 1 CLS Silicone gasket, for 50 ml spinner flask, 51 mm central cap, white 1 CLS Silicone gasket, for ml spinner flask, 70 mm central cap, white 1 CLS l, Silicone gasket for 100 mm central cap, white 1 CLS l, Silicone gasket for central cap, white 1 Replacement Magnetic Stir Bars CLS Magnetic stir bar for 25 ml spinner flasks 1 CLS Magnetic stir bar for ml spinner flasks 1 CLS Magnetic stir bar for 1 und 3 l spinner flasks 1 CLS Magnetic stir bar for 6, 8, 15 und 36 l spinner flasks 1 Replacement Parts CLS O-ring for compression fitting, Ø 7 mm 20 CLS O-ring for compression fitting, Ø 9 mm 10 CLS Compression fitting, Ø 7 mm 1 CLS Silicone plug, Ø 7 mm 10 CLS Compression fitting, Ø 9 mm 1 CLS Silicone plug, Ø 9 mm 10 6

7 Spinner Flasks, BioProcess, Water Jacketed, Height Adjustable Shaft Spinner flask with height adjustable impeller assembly, water jacketed, flat bottom: - Type 1 Class A Borosilicate Glass - For use with recirculating water baths - Jacketed volumes are approximate - Flasks are not graduated - Microcarrier style impeller with glass shaft, PTFE paddle and magnetic stir bar Cat. No. Description Ø Central Ø Sidearm Jacket Volume Ø x Height Spinner Flask, Water Jacketed, Complete with Caps and Impeller Assembly CLS-1430-J ml, flat bottom 70 mm 32 mm 75 ml 70 x 160 mm CLS-1430-J ml, flat bottom 70 mm 32 mm 175 ml 85 x 200 mm CLS-1430-J ml, flat bottom 70 mm 45 mm 260 ml 110 x 200 mm CLS-1430-J1L 1 l, flat bottom 100 mm 45 mm 875 ml 150 x 255 mm CLS-1430-J3L 3 l, flat bottom 100 mm 45 mm ml 200 x 330 mm CLS-1430-J6L 6 l, flat bottom 100 mm 45 mm ml 200 x 445 mm Spinner Flask Only, Water Jacketed CLS-1430-J ml, flat bottom 70 mm 32 mm 75 ml 70 x 160 mm CLS-1430-J ml, flat bottom 70 mm 32 mm 175 ml 85 x 200 mm CLS-1430-J ml, flat bottom 70 mm 45 mm 260 ml 110 x 200 mm CLS-1430-J1L1 1 l, flat bottom 100 mm 45 mm 875 ml 150 x 255 mm CLS-1430-J3L1 3 l, flat bottom 100 mm 45 mm ml 200 x 330 mm CLS-1430-J6L1 6 l, flat bottom 100 mm 45 mm ml 200 x 445 mm Vent Port Assemblies for Sidearms Cat. No. Description Flask size Sidearm Cs. CLS Two port ml 32 mm 1 CLS Single port ml 45 mm 1 CLS Two port ml 45 mm 1 CLS Two port angled ml 45 mm 1 CLS Replacement screw cap, GL-45, open top, blue, for port assembly 6 CLS Replacement gasket, only, GL-45, for port assembly 1 CLS Replacement screw cap, GL-32, open top, blue, for port assembly 6 CLS Replacement gasket, only, GL-32, for port assembly 1 CLS Replacement screw cap, GL-45, open top, green, for port assembly 6 CLS Replacement screw cap, GL-45, open top, yellow, for port assembly 6 7

8 Spinner Flasks with symmetric Impeller Ideal for suspension cultures Several models available: Height adjustable shaft or internal impeller assembly Different bottom designs: Flat bottom, or dimpled bottom to prevent cell accumulation Complete includes: Bottle, impeller assembly, shaft, caps and central cap gasket Entire unit can be autoclaved at 121 C Made from 33 expansion glass, ASTM Typ 1, Class A, and USP Type 1 Overall height is approximate, assembled complete flat dimpled Cat. No. Description Ø Central Ø Sidearm Ø x Height Standard Spinner Flask, Height Adjustable Shaft, Complete CLS ml, flat bottom 38 mm 18 mm 38 x 185 mm CLS ml, flat bottom 51 mm 18 mm 55 x 175 mm CLS ml, flat bottom 70 mm 32 mm 70 x 175 mm CLS ml, flat bottom 70 mm 32 mm 85 x 210 mm CLS ml, flat bottom 70 mm 45 mm 110 x 250 mm CLS L 1 l, flat bottom 100 mm 45 mm 135 x 305 mm CLS L 3 l, flat bottom 100 mm 45 mm 165 x 355 mm CLS L 6 l, flat bottom 100 mm 45 mm 204 x 475 mm CLS L 8 l, flat bottom 100 mm 45 mm 240 x 495 mm CLS L 15 l, flat bottom 100 mm 45 mm 295 x 525 mm CLS ml, dimpled bottom 70 mm 32 mm 70 x 175 mm CLS ml, dimpled bottom 70 mm 32 mm 85 x 210 mm CLS ml, dimpled bottom 70 mm 45 mm 110 x 250 mm CLS L 1 l, dimpled bottom 100 mm 45 mm 135 x 305 mm CLS L 3 l, dimpled bottom 100 mm 45 mm 165 x 355 mm CLS L 6 l, dimpled bottom 100 mm 45 mm 204 x 475 mm Spinner Flask, Internal Impeller Assembly, Complete CLS ml, flat bottom 70 mm 32 mm 70 x 110 mm CLS ml, flat bottom 70 mm 32 mm 85 x 145 mm CLS ml, flat bottom 70 mm 45 mm 110 x 185 mm CLS L 1 l, flat bottom 100 mm 45 mm 135 x 240 mm CLS L 3 l, flat bottom 100 mm 45 mm 165 x 290 mm CLS ml, dimpled bottom 70 mm 32 mm 70 x 110 mm CLS ml, dimpled bottom 70 mm 32 mm 85 x 145 mm CLS ml, dimpled bottom 70 mm 45 mm 110 x 185 mm CLS L 1 l, dimpled bottom 100 mm 45 mm 135 x 240 mm CLS L 3 l, dimpled bottom 100 mm 45 mm 165 x 290 mm 8

9 Replacement Stirring Assembly for CLS-1410, -1411, and Spinner Flasks Stirring assembly complete for Complete internal stirring assembly (IOB) includes: - top cap - silicone gasket - glass rod - compression fitting magnet holder - paddle - magnetic stir bar Single components available Glass shaft only for Cat. No. Flask size Cat. No. Flask size CLS ml CLS ml CLS ml CLS ml CLS l CLS l CLS l CLS l CLS l For Cat. No. Shaftsize Impeller Assembly Glass Shaft Cap Assembly CLS CLS CLS CLS CLS CLS CLS CLS CLS /CLS CLS CLS CLS CLS /CLS CLS CLS CLS CLS /CLS CLS CLS CLS CLS L/CLS L 7 CLS CLS CLS CLS L/CLS L 7 CLS CLS CLS CLS L/CLS L 9 CLS CLS CLS CLS L 9 CLS CLS CLS CLS L 9 CLS CLS CLS Port Assemblies for Spinner Flasks, Stainless Steel (316L) Impeller Unit Glass Shaft Cap 2-Port or 3-Port assemblies, including GL-45 screw cap and silicone gasket Assemblies with siphon, fill- or vent tube Thermowell: 3-Port assembly with extra large inner diameter tube for thermometer probes Cat. No. Flask size Longest tube 2-port with siphon and vent tube CLS ml 64 mm CLS l 100 mm CLS l 140 mm CLS l 254 mm CLS l 280 mm CLS l 292 mm 3-port with siphon, fill and vent tubes for spinner flasks with GL45 sidearms (45 angled sidearm) (for addition or sampling of media) CLS ml CLS l CLS l CLS l CLS l CLS l and 36 l Thermowell 3-port with siphon, fill and vent tubes for spinner flasks with GL45 angled sidearms CLS CLS CLS CLS CLS l 3 l 6 l 8 l 15 l and 36 l 9

10 Dura-Mag Magnetic Stirrer The digital magnetic stirrer Dura-Mag TM series are designed for both cell culture in spinner flasks as well as general laboratory procedures requiring the use of magnetic stirring equipment. Dura-Mag TM stirrers feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. Dura-Mag TM magnetic stirrers are available as 2-, 5- or 9-position models. Dura-Mag 2-Position Magnetic Stirrer Low profile (8,6 cm) Designed to fit side-by-side in most incubators Speed range: rpm Dimensions (WxDxH): 28 x 51 x 8,6 cm Maximum flask sizes: 2 x 8 Liter Cat. No. CLS E CLS-4100-A2E Description 2-Position magnetic stirrer 2-Position magnetic stirrer with factory installed alarm Dura-Mag 5- Position Magnetic Stirrer Standard and compact model Low profile (7,6 cm) Speed range: rpm Dimension (WxDxH): Standard: 42 x 46 x 7,6 cm Compact: 37 x 37 x 7,6 cm Maximum flask sizes: Standard: 5 x 1 Liter or 4 x 3 Liter Compact: 5 x 100 ml or 4 x 1 Liter Cat. No. CLS E CLS-4100-A6E CLS E CLS-4100-A4E Description 5-Position magnetic stirrer, standard 5-Position magnetic stirrer, standard, with factory installed alarm 5-Position magnetic stirrer, compact 5-Position magnetic stirrer, compact, with factory installed alarm Dura-Mag 9-Position Magnetic Stirrer Low profile (7,6 cm) Speed range: rpm Dimension (WxDxH): 42 x 46 x 7,6 cm Maximum flask sizes: 9 x 500 ml Cat. No. CLS E CLS-4100-A9E Description 9-Position magnetic stirrer 9-Position magnetic stirrer with factory installed alarm 10

11 Bio Reactor Vessels and Accessories Bio Reactor Vessels with vertical side arm (VSA) Ideal for cell cultivation and fermentation For use with Overhead Drives and magnetic stirrers 4 or 6 vertical Sidearms, 45 mm OD Without baffles 3 and 6 Liter vessels have a low profile (reduced vessel height maximizes incubator space) Cat. No. Description Ø Central Ø Sidearm Ø x Height CLS l, 4 Sidearms, Low Profile 100 mm 45 mm 240 x 250 mm CLS l, 4 Sidearms, Low Profile 100 mm 45 mm 240 x 295 mm CLS l, 4 Sidearms 100 mm 45 mm 240 x 425 mm CLS l, 4 Sidearms 100 mm 45 mm 295 x 460 mm CLS l, 6 Sidearms, Low Profile 100 mm 45 mm 240 x 250 mm CLS l, 6 Sidearms, Low Profile 100 mm 45 mm 240 x 295 mm CLS l, 6 Sidearms 100 mm 45 mm 240 x 425 mm CLS l, 6 Sidearms 100 mm 45 mm 295 x 460 mm CLS l, 6 Sidearms 100 mm 45 mm 410 x 535 mm Port Assembly, Stainless Steel 2-Port Assembly 3-Port Assembly Thermowell Cat. No. Bottle Size 2-Port with siphon and vent tube CLS l Media bottle CLS l Bio Reactor Vessel or 2 l Media bottle CLS l Bio Reactor Vessel or 5 l Media bottle CLS l Bio Reactor Vessel or 10 l Media bottle CLS l, 36 l Bio Reactor Vessel 3-Port with siphon, fill and vent tube CLS l Media bottle CLS l Bio Reactor Vessel or 2 l Media bottle CLS l Bio Reactor Vessel or 5 l Media bottle CLS l Bio Reactor Vessel or 10 l Media bottle CLS l, 36 l Bio Reactor Vessel For Bio Reactor Vessel with vertical sidearms or media bottles with GL45 neck Stainless steel 316L with 20Ra finish 2- or 3-Port assemblies With siphon, vent or fill tube Thermowell: 3-Port Assembly with large diameter tube for thermometer probes Including 45 mm PP screw cap and silicone gasket Thermowell 3-Port with siphon, vent and large diameter tube CLS l Bio Reactor Vessel CLS l Bio Reactor Vessel CLS l Bio Reactor Vessel CLS l, 36 l Bio Reactor Vessel 3-Port with harvest tube CLS l Bio Reactor Vessel CLS l Bio Reactor Vessel CLS l Bio Reactor Vessel CLS l, 36 l Bio Reactor Vessel 11

12 3-Port Assembly with Sparger Stainless steel 316L with 20Ra finish, including 45 mm PP screw cap and silicone gasket 3-Port Assembly Two models: for gentle aeration with frit or for vigorous aeration with drilled holes for vertical side arm vessels With siphon, fill and aeration tube Cat. No. Bottle Size 3-Port assembly with frit CLS-1437-F50 3 l Bio Reactor Vessel CLS-1437-F51 6 l Bio Reactor Vessel CLS-1437-F52 8 l Bio Reactor Vessel CLS-1437-F53 15 l, Bio Reactor Vessel CLS-1437-F54 36 l Bio Reactor Vessel CLS-1437-F75 Frit only, sparger, stainless steel, 25,4 mm long, 10 µm porosity 3-Port assembly with drilled holes CLS-1437-H40 3 l Bio Reactor Vessel CLS-1437-H41 6 l Bio Reactor Vessel CLS-1437-H42 8 l Bio Reactor Vessel CLS-1437-H43 15 l, Bio Reactor Vessel CLS-1437-H44 36 l Bio Reactor Vessel Glass Frit Cat. No. CLS-1437-G1 Increases aeration Porosity µm Autoclavable Easily attaches with dip tube assemblies Description Glass Frit, 50 mm length, stem OD 8 mm Sampling and Addition Vessel with 2-Port Tube Assembly Flat bottom glass vessel with 2-port drip tube assembly Designed for addition or sampling of media, acid or base Port assembly, stainless steel 316L with 20Ra finish Hose Barbs for attachment of silicone tubing Includes GL32 screw cap PP and gasket CLS-1437-B01 Sampling vessel including 2-port assembly, gasket and PP GL32 screw cap 1 CLS-1437-B02 Sampling vessel only, OAL 94 mm, OD 32 mm 1 CLS port drip tube assembly with gasket 1 CLS Silicone gasket, white 1 CLS GL32 screw cap, PP, blue 6 12

13 Carriers for Bio Reactor Vessels and Spinner Flasks Stainless steel Allows for easy transport of bio reactor vessels and spinner flasks or large carboys Cat. No. Bottle Size / Carboy Size Height x Ø CLS-1406-C06 6 Liter / 9 Liter 203,2 x 228,6 mm CLS-1406-C08 8 Liter / 13 Liter 254,0 x 279,4 mm CLS-1406-C15 15 Liter / 19 Liter 279,4 x 304,8 mm CLS-1406-C36 36 Liter / 45 Liter 330,2 x 431,8 mm Dura-Drive Overhead Motor and Adapters Speed range: rpm. Torque: 2,15 Nm, 30 W Forward and Reverse Digital LCD-Display Easy mounting bracket (peg & grommet) With carrying handle Dimensions: 11 x 15 x 20 cm Weight: 2,0 kg Cat. No. CLS E Description Dura-Drive, digital Overhead Drive CLS Adapter for Overhead Drive, couples motor to PTFE or SS impeller, for 100 mm opening Further Overhead Drives: see page 29 Impeller Assemblies for Overhead Drive Impeller Assemblies PTFE or stainless steel Stainless steel assemblies: with pitched blade for improved uplift mixing in vertical side arm vessels (p. 12) supplied with a dust shield and locking ring Cat. No. Vessel Size and Type Width x Height PTFE-Impeller Assembly for CLS l Spinner flask 75 x 133 mm CLS l Spinner flask 75 x 171 mm CLS l Bio reactor vessel VSA 75 x 171 mm CLS l Bio reactor vessel VSA 75 x 171 mm CLS l Bio reactor vessel VSA 75 x 228 mm CLS l Bio reactor vessel VSA, Low Profile 75 x 171 mm CLS l Bio reactor vessel VSA, Low Profile 75 x 171 mm SST-Impeller Assembly for CLS-1440-P43 3 l Bio reactor vessel VSA, Low Profile CLS-1440-P53 6 l Bio reactor vessel VSA, Low Profile CLS-1440-P48 8 l Bio reactor vessel VSA CLS-1440-P49 15 l Bio reactor vessel VSA CLS-1440-P50 36 l Bio reactor vessel VSA 13

14 NEW! Components for Applikon and Broadley-James bio reactors Available in 2, 3, 5, 7 and 15 l sizes Like-for-like replacement parts for Applikon und Broadley-James brands of bio reactors Clear glass vessel is made from heavy wall, borosilicate glass for superior visibility and resistance to thermal shock Jacketed vessels and red stained vessels available. Stain allows less than 1% of light transmission below 400 nm Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better Impeller blades - Ruston and Marine style available Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James is a registered trademark of Broadley James Corperation CLS Bio reactor vessel, 3 l, unjacketed, clear 1 CLS-1380-R-03 Bio reactor vessel, 3 l, unjacketed, red stained 1 CLS Bio reactor vessel, 3 l, jacketed, clear 1 CLS-1380-STD3 CLS-1381-STD3 Tripod stand for unjacketed vessel (3 l). Top, two-piece ring is made of anodized aluminum while lower ring and legs are electropolished stainless steel. Silicon O-ring and six knurled nuts for headplate attachment included Tripod stand for jacketed vessel (3 l). Top, two-piece ring is made of anodized aluminum while lower ring and legs are electropolished stainless steel. Silicon O-ring and six knurled nuts for headplate attachment included 1 1 CLS Headplate, stainless steel (316L), supplied with silicone O-ring, 1 18 total ports: central M30, 1 x G3/4, 5 x M18, 2 x M12, 6 x M10, 3 x M6 CLS Agitator assembly, stainless steel (316L), shaft (L x Ø) 222 x 8 mm 1 CLS Impeller Blade, Marine style, Vortex (Down), Ø 43 mm, Shaft Ø 8 mm 1 CLS Triple port adapter, M18, 3 x 1/8 tubing ports, inlets staggered in height 1 CLS Septum holder, M18,supplied with silicone rubber septum, for injections 1 CLS Replacement septa, silicone rubber, for CLS CLS Thermowell, M10, 0,31 ID, immersion length 200 mm 1 CLS Aeration tube, M10, sintered (15 µm) sparger, immersion length 238 mm 1 CLS Air inlet / adapter, M10 1 CLS Sampling tube, adjustable, max. immersion length 232 mm, tubing OD ¼ 1 CLS Blind stoppers, M6, fitted from the inside 1 CLS Blind stoppers, M10, fitted from the inside 1 CLS Blind stoppers, M18, fitted from the inside 1 CLS Heat exchanger, cold finger style, M18 1 CLS Harvest tube, M10, tapered tip extends to within 2 mm of the bottom of the vessel 1 CLS Baffle assembly, M6, increases mixing efficiency 1 CLS Probe holder, M18, height adjustable with compression fitting, for 12 mm probes 1 CLS-1380-GC1 Condenser, glass, 12 mm tubing for use with CLS CLS Stirrer with controller, 240 W, U/Min, 643 mnm, RS-232 port 1 Replacement silicone o-rings are also available from us For other bio reactor sizes and a large choice of further accessories please contact us 14

15 Culture and Shake Flasks Fernbach Flasks No Baffles Plain Top GL45 Top DeLong Top Three Side Baffles 70 mm Screw Thread Top Different designs available: - No baffles - Three side baffles - Three bottom baffles - Six baffles Different tops: - Plain: (59 mm ID) - DeLong Neck: (38 mm OD) - GL45 screw thread top - 70 mm screw thread top Screw caps available as solid or vented caps Volume: ml Dimensions: - (Ø x Height): 210 x 225 mm Material: - Borosilicate glass, Typ I, Class A Three Bottom Baffles Six Baffles Six Baffles CLS No baffle, plain top (ID = 59 mm) 1 CLS No baffle, DeLong top (OD = 38 mm) 1 CLS No baffle, vented screw cap (GL45) 1 CLS No baffle, solid screw cap (thread diameter = 70 mm) 1 CLS No baffle, vented screw cap (thread diameter = 70 mm) 1 CLS Three side baffles, plain top (ID = 59 mm) 1 CLS Three side baffles, DeLong top (OD = 38 mm) 1 CLS Three side baffles, solid screw cap (GL45) 1 CLS Three side baffles, vented screw cap (GL45) 1 CLS Three side baffles, vented screw cap (thread diameter = 70 mm) 1 CLS Three bottom baffles, plain top (ID = 59 mm) 1 CLS Three bottom baffles, DeLong top (OD = 38 mm) 1 CLS Three bottom baffles, solid screw cap (GL45) 1 CLS Three bottom baffles, vented screw cap (GL45) 1 CLS Three bottom baffles, solid screw cap (thread diameter = 70 mm) 1 CLS Three bottom baffles, vented screw cap (thread diameter = 70 mm) 1 CLS Six baffles, plain top (ID = 59 mm) 1 CLS Six baffles, DeLong top (OD = 38 mm) 1 CLS Six baffles, vented screw cap (GL45) 1 CLS Six baffles, vented screw cap (thread diameter = 70 mm) 1 15

16 Erlenmeyer Flasks (Pyrex ) Designed from ASTM specification E 1404, Type I, class 1 requirements Narrow neck with reinforced top Thick walled body White graduation CG-8496-P25 25 ml, 41 x 65 mm (Ø x H) 1 CG-8496-P50 50 ml, 51 x 75 mm (Ø x H) 1 CG-8496-P ml, 67 x 114 mm (Ø x H) 1 CG-8496-P ml, 82 x 132 mm (Ø x H) 1 CG-8496-P ml, 89 x 144 mm (Ø x H) 1 CG-8496-P ml, 101 x 176 mm (Ø x H) 1 CG-8496-P1L 1000 ml, 129 x 216 mm (Ø x H) 1 CG-8496-Pack 5 Flask in following sizes 50 ml, 125 ml, 250 ml, 500 ml and 1000 ml 1 Erlenmeyer Flasks with GL45 Screw Cap Type 1 Class A Borosilicate Glass White graduation With screw thread Supplied with PP linerless cap and pouring ring CG ml, 120 mm height, screw thread GL-32 1 CG ml, 130 mm height, screw thread GL-45 1 CG ml, 170 mm height, screw thread GL-45 1 CG ml, 220 mm height, screw thread GL-45 1 CG ml, 275 mm height, screw thread GL-45 1 CG ml, 340 mm height, screw thread GL-45 1 Shake Flasks Type 1 Class A Borosilicate Glass With reinforced top Choose between three side baffles or three extra deep side baffles Shake flask, three side baffles CLS ml, 70 x 116 mm (Ø x H) 1 CLS ml, 85 x 140 mm (Ø x H) 1 CLS ml, 130 x 215 mm (Ø x H) 1 CLS ml, 160 x 270 mm (Ø x H) 1 Shake flask, three extra deep side baffles CLS ml, 85 x 140 mm (Ø x H) 1 CLS ml, 100 x 180 mm (Ø x H) 1 CLS ml, 130 x 215 mm (Ø x H) 1 CLS ml, 160 x 270 mm (Ø x H) 1 16

17 Shake Flasks (continued) Type 1 Class A Borosilicate Glass With DeLong neck No baffles Supplied with or without stainless steel closure Cat. No. Description Neck diameter Cs. Shake flask, DeLong neck, no baffles CLS ml, 40 x 96 mm (Ø x H) 18 mm 1 CLS ml, 50 x 105 mm (Ø x H) 18 mm 1 CLS ml, 70 x 140 mm (Ø x H) 25 mm 1 CLS ml, 85 x 160 mm (Ø x H) 38 mm 1 CLS ml, 100 x 200 mm (Ø x H) 38 mm 1 CLS ml, 130 x 230 mm (Ø x H) 38 mm 1 CLS ml, 160 x 300 mm (Ø x H) 38 mm 1 CLS ml, 205 x 350 mm (Ø x H) 38 mm 1 CLS ml, 235 x 410 mm (Ø x H) 38 mm 1 Shake flask, DeLong neck, no baffles, including stainless steel closure CLS ml, 40 x 96 mm (Ø x H) 18 mm 1 CLS ml, 50 x 105 mm (Ø x H) 18 mm 1 CLS ml, 70 x 140 mm (Ø x H) 25 mm 1 CLS ml, 85 x 160 mm (Ø x H) 38 mm 1 CLS ml, 100 x 200 mm (Ø x H) 38 mm 1 CLS ml, 130 x 230 mm (Ø x H) 38 mm 1 CLS ml, 160 x 300 mm (Ø x H) 38 mm 1 CLS ml, 205 x 350 mm (Ø x H) 38 mm 1 CLS ml, 235 x 410 mm (Ø x H) 38 mm 1 Type 1 Class A Borosilicate Glass With DeLong neck Three side baffles Alternatively three extra deep side baffles Shake flask, DeLong neck, three side baffles CLS ml, 50 x 105 mm (Ø x H) 1 CLS ml, 70 x 140 mm (Ø x H) 1 CLS ml, 85 x 160 mm (Ø x H) 1 CLS ml, 100 x 200 mm (Ø x H) 1 CLS ml, 130 x 230 mm (Ø x H) 1 CLS ml, 160 x 300 mm (Ø x H) 1 Shake flask, DeLong neck, three extra deep side baffles CLS ml, 50 x 105 mm (Ø x H) 1 CLS ml, 70 x 140 mm (Ø x H) 1 CLS ml, 85 x 160 mm (Ø x H) 1 CLS ml, 100 x 200 mm (Ø x H) 1 CLS ml, 130 x 230 mm (Ø x H) 1 CLS ml, 160 x 300 mm (Ø x H) 1 CLS ml, 185 x 340 mm (Ø x H) 1 CLS ml, 205 x 350 mm (Ø x H) 1 17

18 Shake Flasks (continued) Type 1 Class A Borosilicate Glass With DeLong neck Six baffles: three side baffles, three bottom baffles Alternatively four bottom baffles Shake flask, DeLong neck, six baffles, three side baffles and three bottom baffles CLS ml, 85 x 160 mm (Ø x H) 1 CLS ml, 100 x 200 mm (Ø x H) 1 CLS ml, 130 x 230 mm (Ø x H) 1 CLS ml, 160 x 300 mm (Ø x H) 1 CLS ml, 185 x 340 mm (Ø x H) 1 CLS ml, 205 x 350 mm (Ø x H) 1 Shake flask, DeLong neck, four bottom baffles CLS ml, 85 x 153 mm (Ø x H) 1 CLS ml, 100 x 200 mm (Ø x H) 1 CLS ml, 130 x 230 mm (Ø x H) 1 Type 1 Class A Borosilicate Glass With screw thread for vented screw caps (0,22 µm PTFE-membrane) The flasks can be autoclaved with the cap attached Three or six baffles Six baffled flask supplied with vented cap attached Shake flask, screw thread, three side baffles, no cap CLS ml, 65 x 120 mm, screw thread Ø=32 mm 1 CLS ml, 85 x 125 mm, screw thread Ø=45 mm 1 CLS ml, 100 x 165 mm, screw thread Ø=45 mm 1 CLS ml, 130 x 215 mm, screw thread Ø=45 mm 1 CLS ml, 160 x 275 mm, screw thread Ø=45 mm 1 Shake flask, GL45 screw thread, six baffles, including vented cap CLS ml, 85 x 125 mm 1 CLS ml, 100 x 165 mm 1 CLS ml, 130 x 215 mm 1 CLS ml, 160 x 275 mm 1 CLS Blue vented cap, GL32, non sterile 5 CLS Grey vented cap, GL45, non sterile 1 CLS Blue vented cap, GL45, non sterile 5 Type 1 Class A Borosilicate Glass 70 mm inner diameter screw thread Solid or vented screw cap, ID=70 mm, 0,22 µm PTFE-membrane for vented cap Capacity 2 liter Six bottom baffles CLS ml, supplied with 70 mm vented cap 1 CLS ml, supplied with 70 mm solid cap 1 18

19 Shake Flask from Polycarbonate Erlenmeyer and Fernbach flasks constructed from optically clear Polycarbonate Flat bottom or with three baffles Autoclavable Vented cap included (Thread Ø = 70 mm) CLS-2170-EP2L Erlenmeyer flask, 2000 ml, flat bottom, 70 mm vented cap 6 CLS-2170-FP2L Fernbach flask, 2000 ml, flat bottom, 70 mm vented cap 6 CLS-2170-FP3L Fernbach flask, 3000 ml, flat bottom, 70 mm vented cap 4 CLS-2171-EB2L Erlenmeyer flask, 2000 ml, baffled bottom, 70 mm vented cap 6 CLS-2171-FB2L Fernbach flask, 2000 ml, baffled bottom, 70 mm vented cap 6 CLS-2171-FB3L Fernbach flask, 3000 ml, baffled bottom, 70 mm vented cap 4 CLS-2172-V070 Vented cap, 70 mm 24 Trypsinizing Flask Type 1 Class A Borosilicate Glass 3 deep side baffles for optimum agitation Beaded, break-resistant lip and 50 mm OD neck CLS ml, 158 x 290 mm (Ø x H) 1 CLS ml, 205 x 360 mm (Ø x H) 1 Transfer Media Bottle Type 1 Class A Borosilicate Glass Hose Barb outlet at the bottom for easy gravity transfer of solutions Pouring ring and GL-45 vented cap included CLS ml, hose barb for ¼ ID tubing 1 CLS ml, hose barb for ¼ ID tubing 1 CLS ml, hose barb for ¼ ID tubing 1 CLS L 1 l, hose barb for ¼ ID tubing 1 CLS L 2 l, hose barb for ¼ ID tubing 1 CLS L 5 l, hose barb for ¼ ID tubing 1 CLS L 10 l, hose barb for ½ ID tubing 1 Roux Culture Flask Type 1 Class A Borosilicate Glass Offset neck prevents cultures from entering the neck area Supplied with rubber lined phenolic closure CLS ml, including screw cap 1 19

20 Closures from Stainless Steel or Polypropylene Ideal for use with culture tubes or flasks 305 stainless steel or polypropylene SST closures with finger grips for firm fit PP closures with two positions, open for gas exchange or closed for humidified environment Autoclavable Stainless steel closures with fingers CLS Ø 18 mm, stainless steel 10 CLS Ø 25 mm, stainless steel 10 CLS Ø 38 mm, stainless steel 10 Polypropylene closures with two positions CLS Ø 25 mm, polypropylene 10 CLS Ø 38 mm, polypropylene 10 Closures, Silicone Sponge Silicone sponge sealed in a silicone rubber ring Flange fits snugly over necks permitting gas exchange whilst reducing evaporation Ideal for aerobic cultures Withstand heat sterilization up to 180 C and autoclaving Cat. No. For use with: Cs. CLS mm culture tubes, 18 mm screw necks 10 CLS mm culture tubes, ml Erlenmeyer flasks, ml DeLong flasks CLS ml Erlenmeyer flasks 10 CLS mm culture tubes, ml Erlenmeyer flasks, ml DeLong flasks 10 Vented Cap Polypropylene, 45 mm or 70 mm 0,22 µm PTFE or 20 µm PVDF membrane Sterile or non-sterile Non-sterile autoclavable at 121 C CLS Grey vented cap, GL-45, non-sterile 1 CLS Blue vented cap, GL-45, non-sterile 5 CLS Blue vented cap, GL-25, non-sterile 5 CLS Blue vented cap, GL-25, non-sterile 5 CLS Orange vented cap, GL-45, sterile, for use on plastic vessels only 1 CLS-1484-A-70 Blue vented cap, 70 mm, non-sterile 1 CLS-1484-A-72 Silicone gasket only, for 70 mm vented cap 1 20

21 Caps, GL Thread, Polypropylene, solid Polypropylene, 45 mm, 70 mm or 100 mm Autoclavable at 140 C Clear premium caps (CLS ) o Made from TpCh260 (similar to PFA) o Can be used from -196 C to 260 C o PTFE coated silicone seal Screw caps CLS GL-25, blue 10 CLS GL-32, blue 10 CLS GL-32, orange 10 CLS SC GL-45, blue 10 CLS GL-45, grey 10 CLS GL-45, green 10 CLS GL-45, orange 10 CLS GL-45, purple 10 CLS GL-45, yellow 10 CLS GL-45, clear, premium caps (see above for features) 5 Screw caps 70 mm and 100 mm CLS Blue, 70 mm 1 CLS Silicone liner only for 70 mm cap 1 CLS Blue, 100 mm 1 CLS Silicone liner only for 100 mm cap 1 Pouring Rings Polypropylene Autoclavable at 140 C CLS GL-32, blue 10 CLS GL-32, clear 10 CLS GL-45, blue 10 CLS GL-45, green 10 CLS GL-45, grey 10 CLS GL-45, yellow 10 CLS GL-45, clear 10 Open Top Cap, GL Thread, Polypropylene Polypropylene Autoclavable at 140 C PTFE-Septa sold seperately Open Top Caps, screw thread CLS GL-32, blue 6 CLS GL-45, blue 6 CLS GL-45, green 6 CLS GL-45, yellow 6 PTFE-Septa for open top caps CG PTFE-Septa for GL-32 1 CG PTFE- Septa for GL

22 Break Resistent Foam Dewar Flask Chemical inert and mechanical robust foam suitable for use with liquid nitrogen Different models available Each Dewar is supplied with a lid Optional freezer packs for 800 ml or 1400 ml For use with Lab Armor Beads (see p. 31) Cat. No. Form and Capacity Cs. CG-1590-F500 Low form, 500 ml 1 CG-1590-F800 Low form, 800 ml 1 CG-1590-F1400 Low form, 1400 ml 1 CG-1594-F1800 Tall form, 1800 ml 1 CG-1590-F100 Freezer packs for 800 ml or 1400 ml vessels 4 Centrifuge Tubes, Black CELLTREAT centrifuge tubes For light-sensitive samples Material: tube PE, cap HDPE Temperature range -80 C C Max force RCF: 15 ml g 50 ml g Cat. No. Capacity Description Cs. CLS-4303-B14 15 ml PE, black, inner package 25 pieces 100 CLS-4303-B15 15 ml PE, black, inner package 25 pieces 500 CLS-4303-B49 50 ml PE, black, inner package 25 pieces 100 CLS-4303-B50 50 ml PE, black, inner package 25 pieces 500 Rotary Evaporator Adapter Simple connection of standard sample vial to vapour tube or bump trap of a rotary evaporator 6 double threaded connectors, PTFE lined PP 3 different top outer joints CG Adapter kit complete: 24/40 glass adapter with 6 threaded vial adapters: 1 Kit , , , , , CG Adapter kit complete: 29/26 glass adapter with 6 threaded vial adapters: 1 Kit , , , , , CG Adapter kit complete: 29/42 glass adapter with 6 threaded vial adapters: 1 Kit , , , , , CG threaded vial adapters set: , , , , , Set CG /40 Glass adapter 1 CG /26 Glass adapter 1 CG /42 Glass adapter 1 CG Connector to fit vials 1 CG Connector to fit vials 1 CG Connector to fit vials 1 CG Connector to fit vials 1 CG Connector to fit vials 1 CG Connector to fit vials 1 22

23 Filling Bell, Aseptic Type 1 Class A Borosilicate Glass Tubing is attached to the serrated hose connection Receiving vessel is placed inside the bell Different sizes available Cat. No. ID of Bell / Height Cs. CLS mm / 75 mm 1 CLS mm / 95 mm 1 CLS mm / 100 mm 1 CLS mm / 125 mm 1 CLS mm / 130 mm 1 Pressure Relief Reaction Vials Special open top caps which prevent pressures above 10,3 bar (150 psi) Made from 33 expansion glass, conform to ASTM Typ 1, Class A and ISO 3585 for maximum thermal and chemical resistance Capacity from 4-40 ml Packaged in a SBS coated tray with alphanumeric coordinates Cat. No. Capacity Cs. CG ml 100 CG ml 100 CG ml 100 CG ml 100 Hybridization Bottles Type 1 Class A Borosilicate Glass Heavy Wall Either with red (to 180 C) or blue (to 140 C) screw cap Dual chamber bottles also available Cat. No. Bottle ID x Length (mm), cap style Cs. CG x 75 mm, red cap 1 CG x 100 mm, red cap 1 CG x 150 mm, red cap 1 CG x 250 mm, red cap 1 CG x 300 mm, red cap 1 CG x 150 mm, dual chamber, red cap 1 CG x 300 mm, dual chamber, red cap 1 CG x 75 mm, blue cap 1 CG x 100 mm, blue cap 1 CG x 150 mm, blue cap 1 CG x 250 mm, blue cap 1 CG x 300 mm, blue cap 1 CG x 150 mm, dual chamber, blue cap 1 CG x 300 mm, dual chamber, blue cap 1 23

24 Centrifuge Tubes Pyrex Type 1 Class A Borosilicate Glass Round bottom or conical bottom Screw thread closures or rubber stoppers CG ml centrifuge tubes, Pyrex glass, black phenolic and rubber lined screw cap, 12 round bottom, 29 x 122 mm (OD x Length) CG ml centrifuge tube, Pyrex glass, black PP and PTFE lined screw cap, round bottom, 43 x 139 mm (OD x Length) 1 CG ml centrifuge tube, black phenolic PP lined screw cap, conical bottom 1 CG ml centrifuge bottles, Pyrex glass, heavy wall, for rubber stoppers # 6 12 CG ml centrifuge bottles, Pyrex glass, heavy wall, for rubber stoppers # 6 6 Spot Plate Pyrex Type 1 Class A Borosilicate Glass 9 concave depressions which are useful for soil chemistry, colour reactions, microchemical applications and microscopic observations Dimensions of depressions: 22 x 7 mm (Ø x D) CG Spot plate, 9 concave depressions, 85 x 100 mm 6 Cloning Cylinders Type 1 Class A Borosilicate Glass To clone single cells or subpopulations in a tissue culture dish Can be autoclaved or dry heat sterilized Cylinders are sealed to the plate with sterile silicone high vacuum grease Cat. No. OD Height Cs. CLS mm 8 mm 125 CLS mm 8 mm 125 CLS mm 10 mm 125 Disposable Hemocytometer, C-Chip TM, Plastic Grid: Neubauer Improved Two chambers per Chip 10 µl sample volume Further properties: - Use with: erythrocytes, leukocytes, mammal cells etc. - Dimensions: 25 x 75 x 1,6 mm - Chamber depth: 100 µm - 50 chips = 100 tests per box CLS Disposable Hemocytometer, C-Chip 1 Box 24

25 Anaerobic Culture Tubes Hungate Anaerobic Culture Tubes, Screw Thread The technique developed by Hungate et al. is ideal for cultivation of anaerobic microorganism Hungate tubes complete consist of following items: a) Screw cap with a 9 mm opening b) Flange style stopper made from butyl rubber c) 16 x 125 mm screw thread style tube designed to maintain anaerobic conditions Lit.: Use of Syringe Methods for anaerobics ; J.M. Macy, J.E. Snellen and R.E. Hungate. J. Clin. Nutrition, Dec Cat. No. Description Dimensions Cs. (mm) CLS Hungate Tubes complete, incl. butyl stoppers and screw caps 16 x Replacement components CLS Hungate glass tubes only 16 x CLS Open top screw caps only Opening mm CLS Butyl rubber stoppers only Height 5,4 mm 100 Balch Anaerobic Culture Tubes, Aluminum Seal Especially suited for studies with over pressures between 2-3 bar Culture tubes complete consist of following items: a) 20 mm Aluminum Crimp Seal b) Flange style stopper made from blue butyl rubber c) 18 x 150 mm crimp style tube designed to maintain anaerobic conditions Crimper and Decapper for aluminum seals (see page 26) Cat. No. Description Dimensions Cs. (mm) CLS Anaerobic tubes complete, incl. butyl stoppers and aluminum seals 18 x Replacement components CLS Glass tubes only 18 x CLS Aluminum seals only CLS Butyl rubber stoppers only

26 Anaerobic Bottles Bottles for anaerobic cultivation or media storage Gas tight blue butyl rubber stoppers as for CLS Manufactured from borosilicate glass Media bottle for anaerobic applications CLS-4217 supplied with butyl rubber stopper and aluminum seal CLS Anaerobic culture bottle, 500 ml, single neck 1 CLS Anaerobic culture bottle, 1000 ml, single neck 1 CLS Anaerobic culture bottle, 2000 ml, two necks 1 CLS Anaerobic media bottle, 50 ml, 46 x 88 mm, single neck 1 CLS Anaerobic media bottle, 100 ml, 56 x 100 mm, single neck 1 CLS Anaerobic media bottle, 250 ml, 70 x 138 mm, single neck 1 CLS Anaerobic media bottle, 500 ml, 85 x 176 mm, single neck 1 CLS Anaerobic media bottle, 1000 ml, 100 x 215 mm, single neck 1 Replacement components CLS Aluminum seals only 100 CLS Butyl rubber stoppers only 100 Crimper and Decapper for Anaerobic Culture Tubes and Bottles Hand operated For 20 mm aluminum seals CG Crimper 1 CG Decapper, simple 1 CV Decapper 1 Glass Cell Spreader, Drigalski and L-Shaped Manufactured from 5 mm Ø borosilicate glass tubing Ideal for spreading on agar Two styles available: 120 bend (Drigalski) 90 bend (L-Shape) CLS Cell spreader, bend 120 (Drigalski) 10 CLS Cell spreader, bend 90 (L-Shaped) 10 26

27 Round Cover Slips Cover Slips Manufactured from highest quality borosilicate glass High chemical resistance Ideal for neuronal tissue cultures and less adherent cells Exceptional for fluorescence and confocal microscopy approx. pcs. CLS mm, round, German Glass, Thickness # CLS mm, round, German Glass, Thickness # CLS mm, round, German Glass, Thickness # CLS mm, round, German Glass, Thickness # CLS mm, round, Corning 0211 Float Glass, Thickness # CLS mm, round, Corning 0211 Float Glass, Thickness # CLS mm, round, Corning 0211 Float Glass, Thickness # CLS mm, round, Corning 0211 Float Glass, Thickness # CLS mm, round, Corning 0211 Float Glass, Thickness # Rectangular and square Cover Slips Manufactured from Corning 0211 Float Glass Thickness: # 1 (0,13-0,16 mm) - # 1,5 (0,16-0,19 mm); # 2 (0,17-0,25 mm) Packing unit: one Ounce / ca. 28 g Cat. No. Description Size Cs. approx. pcs. CLS Square, Thickness # 1 9 x 9 mm 765 CLS Square, Thickness # 1 18 x 18 mm 242 CLS Square, Thickness # 1 22 x 22 mm 150 CLS Square, Thickness # 1 25 x 25 mm 125 CLS Rectangular, Thickness # 1 9 x 22 mm 435 CLS Rectangular, Thickness # 1 9 x 35 mm 260 CLS Rectangular, Thickness # 1 9 x 50 mm 175 CLS Rectangular, Thickness # 1 10,5 x 35 mm 215 CLS Rectangular, Thickness # 1 10,5 x 50 mm 150 CLS Rectangular, Thickness # 1 13 x 54 mm 120 CLS Rectangular, Thickness # 1 22 x 30 mm 119 CLS Rectangular, Thickness # 1 22 x 40 mm 89 CLS Rectangular, Thickness # 1 22 x 50 mm 71 CLS Rectangular, Thickness # 1 24 x 30 mm 109 CLS Rectangular, Thickness # 1 24 x 40 mm 82 CLS Rectangular, Thickness # 1 24 x 50 mm 65 CLS Rectangular, Thickness # 1 24 x 60 mm 54 CLS Rectangular, Thickness # 1 25 x 75 mm 40 CLS Square, Thickness # 1,5 18 x 18 mm 209 CLS Square, Thickness # 1,5 22 x 22 mm 140 CLS Rectangular, Thickness # 1,5 22 x 30 mm 103 CLS Rectangular, Thickness # 1,5 22 x 40 mm 77 CLS Rectangular, Thickness # 1,5 22 x 50 mm 62 CLS Rectangular, Thickness # 1,5 24 x 30 mm 94 CLS Rectangular, Thickness # 1,5 24 x 40 mm 71 CLS Rectangular, Thickness # 1,5 24 x 50 mm 56 CLS Rectangular, Thickness # 1,5 24 x 60 mm 47 CLS Square, Thickness # 2 18 x 18 mm 179 CLS Square, Thickness # 2 22 x 22 mm 120 CLS Square, Thickness # 2 25 x 25 mm 93 27

28 Tissue Grinders, Homogeniziers Tissue Grinder, Dounce Designed for studies where the nucleus has to remain intact Polished mortar and pestles All glass construction Supplied with two pestles: - Pestle A: large clearance, for initial sample reduction - Pestle B: small clearance, to form the final homogenate Cat. No. Working capacity Pestle diameter, chamber length Cs. CLS ml 11 mm, 48 mm 1 CLS ml 13 mm, 82 mm 1 CLS ml 22 mm, 94 mm 1 CLS ml 32 mm, 140 mm 1 Tissue Grinder, Potter-Elvehjem, Round un-ground glass pestle and polished mortar Generally used with soft tissue such as brain and liver Cat. No. Working capacity Pestle diameter, chamber length Cs. CLS ,1 ml 3,65 mm, 31 mm 1 CLS ml 5,0 mm, 55 mm 1 CLS ml 9,0 mm, 60 mm 1 CLS ml 10 mm, 65 mm 1 CLS ml 13 mm, 75 mm 1 CLS ml 15 mm, 80 mm 1 CLS ml 19 mm, 105 mm 1 CLS ml 25 mm, 125 mm 1 Tissue Grinder, Potter-Elvehjem, PTFE-Pestle PTFE-pestle and un-ground mortar Stainless steel shaft, suitable for Overhead Drive - see page 29 Optional T handle to assist manual grinding Generally used with soft tissue such as brain and liver Cat. No. Working capacity Pestle diameter, chamber length Cs. CLS ml 10 mm, 65 mm 1 CLS ml 13 mm, 75 mm 1 CLS ml 15 mm, 80 mm 1 CLS ml 19 mm, 105 mm 1 CLS ml 25 mm, 125 mm 1 CLS Optional T handle stainless steel 1 28

29 Tissue Grinder, Tenbroeck To homogenize small samples Clearance between pestle and mortar approx. 0,15 mm Hollow pestle allowing addition of ice water to keep samples chilled during grinding process Cat. No. Working capacity Pestle Ø, chamber length, stopper size Cs. CLS ml 10 mm, 65 mm, CLS ml 13 mm, 75 mm, 00 1 CLS ml 15 mm, 80 mm, 0 1 CLS ml 19 mm, 105 mm, 2 1 CLS ml 25 mm, 125 mm, 4 1 Tissue Grinder, Tapered, all glass Conical shaped ungrounded pestle, mortar and pestle all glass Large surface for most effective grinding For tougher samples such as heart, lung or muscle Two styles available: A : with reservoir and T-shaped handle B : without reservoir and rod style handle Cat. No. Working capacity Style Cs. CLS ml A 1 CLS ml B 1 Tissue Grinder, Griffiths, all glass All glass construction 5 ml size for grinding of emulsions and tissues, ground half round sphere ensures perfect grinding 15 ml size, pestle with projections at the end for coarse grinding, upper chamber is precision ground Cat. No. Working capacity Pestle diameter, chamber length Cs. CLS ml 12 mm, 80 mm 1 CLS ml 15 mm, 95 mm 1 Tissue Grinder, Micro Overhead Stirrer Lightweight micro stirrer Ideal for tissue grinders having stainless steel pestles Supplied complete with stirrer / controller, tripod with a vertical support rod, clamp holder and coupling Coupling fits 6,35 mm stainless steel pestle rod CG-2039-A-500 Micro Overhead stirrer for tissue grinders, complete 1 For more overhead stirrers see page 13 29

30 BioVortexer, Motor, Disposable Pestles and Tubes Battery-powered, two AA batteries included Pestles and tubes manufactured from PP, DNase-, RNase- and Pyrogen-free Sterile Centrifugal pellets, precipitates and other solids are completely dispersed in seconds CLS BioVortexer Mixer only 1 CLS Pestle, for 0,5 ml tubes, individually wrapped 100 CLS Tubes, 0,5 ml, PP, individually wrapped 100 CLS Pestle and Tubes, 0,5 ml, individually wrapped 100 CLS Pestle, for 1,5 ml Tubes, individually wrapped 100 CLS Tubes, 1,5 ml, PP, individually wrapped 100 CLS Pestle and Tubes, 1,5 ml, individually wrapped 100 CLS-5002-B21 Pestle, for 0,5 ml Tubes, bulk packed 100 CLS-5002-B23 Tubes, 0,5 ml, PP, bulk packed 100 CLS-5002-B25 Pestle and Tubes, 0,5 ml, bulk packed 100 CLS-5002-B31 Pestle, for 1,5 ml Tubes, bulk packed 100 CLS-5002-B33 Tubes, 1,5 ml, PP, bulk packed 100 CLS-5002-B35 Pestle and Tubes, 1,5 ml, bulk packed 100 Tissue Grinder, Stainless Steel, Cell Dissociation Sieves Designed to make single cell suspensions from tissue pieces Manufactured from stainless steel Two sieve cup sizes: 85 ml and 130 ml Screen diameter 37 mm Complete includes: pan, glass pestle, key and nine screens (10 to 150 mesh size / one each) CLS Tissue Grinder, dissociation sieve, complete, 85 ml 1 CLS Tissue Grinder, dissociation sieve, complete, 130 ml 1 CLS Cell/Screen (SS), 10 mesh, Ø 2000 µm 5 CLS Cell/Screen (SS), 20 mesh, Ø 841 µm 5 CLS Cell/Screen (SS), 30 mesh, Ø 595 µm 5 CLS Cell/Screen (SS), 40 mesh, Ø 420 µm 5 CLS Cell/Screen (SS), 50 mesh, Ø 297 µm 5 CLS Cell/Screen (SS), 60 mesh, Ø 250 µm 5 CLS Cell/Screen (SS), 80 mesh, Ø 177 µm 5 CLS Cell/Screen (SS), 100 mesh, Ø 149 µm 5 CLS Cell/Screen (SS), 150 mesh, Ø approx. 100 µm 5 CLS Cell/Screen (SS), 200 mesh, Ø 74 µm 5 CLS Cell/Screen (SS), 300 mesh, Ø approx. 50 µm 5 CLS Cell/Screen (SS), 400 mesh, Ø 37 µm 5 CLS Cell/Screen (SS), 500 mesh, Ø approx. 30 µm 5 CLS Glass pestle only, 16 mm 1 CLS Cell pan & locking ring key only, 85 mm 1 CLS Cell pan & locking ring key only, 130 mm 1 30

31 Bags, Cell Culture, Premium, 8-Port, to fit GE WAVE TM Rocking Platforms 8-ports, standard ports, fill port and oxygen sensor sleeve Sterile (gamma irradiated) Constructed using flex-crack resitant films, EVA (Ethylenvinylacetate) or PE (Polyethylene) Working volume is 50 % of stated bag size Cat. No. Capacity Working volume Material Cs. CLS-1202-E10 10 l 5 l EVA 1 CLS-1202-E20 20 l 10 l EVA 1 CLS-1202-E22 22 l 11 l EVA 1 CLS-1202-E50 50 l 25 l EVA 1 CLS-1202-P10 10 l 5 l PE 1 CLS-1202-P20 20 l 10 l PE 1 CLS-1202-P22 22 l 11 l PE 1 CLS-1202-P50 50 l 25 l PE 1 Bags, Cell Culture, Ultra Clear, 6-Port, to fit GE WAVE TM Rocking Platforms Material: - inner: PE (Polyethylene) - outer: Flex 600 Sterile (gamma irradiated) Excellent choice for mammalian and plant cell lines with extended mixing times USP Class VI tested materials CLS l, Flex 600 Film, 6 ports 1 CLS l, Flex 600 Film, 6 ports 1 CLS l, Flex 600 Film, 6 ports 1 CLS l, Flex 600 Film, 6 ports 1 Rocking platforms for cell culture bags see page 33 LAB ARMOR TM Beads - Water, Ice and Oil Replacement Dry metallic beads replace water in water baths, aluminum blocks and ice in ice buckets Maintain temperatures from -20 C to 8 C for 4 or more hours Temperature range - 80 C to 180 C Prevents contamination by water entering your samples Reusable CLS Lab Armor Beads 2 l CLS Lab Armor Beads 4 l CLS Lab Armor Beads (2 x 4 l Containers) 8 l CLS Walkabout insulative scoop tray ca. 0,5 l 1 CLS Chill Bucket TM ice bucket, incl. beads, bead bag and 2 chill packs 1 CLS Chill Bucket TM ice bucket, without beads, with bead bag and 2 chill packs 1 CLS Chill packs 4 pcs. 31

32 Versa-Rock TM Digital Rocker Equipment The Versa-Rock TM is a digital slow speed rocker for general laboratory cell culture work. This rocking platform accepts a variety of optional trays. Peg and grommet style trays make changing convenient and interchangeable with other similar systems. Low profile chassis Digital speed display Locking speed control knob Peg and grommet tray connection Rocks: 5-30 / Min. Range of motion: 5-14 Max. load: 9 kg - evenly distributed Base overall dimensions: 30,2 x 31,75 x 14,3 cm 2-Year warranty Cat. No. CLS E CLS CLS CLS CLS Description Rocker, Base only, digital Aluminum tray with liners, 305 x 305 mm Aluminum tray with liners, 381 x 381 mm Aluminum tray with liners, 508 x 508 mm Aluminum tray with liners, 508 x 762 mm Versa-Orb TM Digital Orbital Shaker, 1 Orbit The Versa-Orb TM is a heavy-duty, variable speed shaker. The device is ideal for the agitation of gels, staining, de-staining and assay development. The orbital platform accepts a variety of optional trays. Peg and grommet style trays make changing of platforms (i.e. tilting rack - see below) convenient and interchangeable with other similar systems Digital speed display Locking speed control knob Peg and grommet tray connection Speed range: rpm Orbit: 25,4 mm / 1 Max. load: 10 kg Dimensions, base: 30,2 x 30,5 x 11,4 cm Cat. No. CLS E CLS CLS CLS CLS CLS CLS CLS CLS-4285-R1 Description Orbital shaker, base only, digital Aluminum tray with liners, 305 x 305 mm Aluminum tray with liners, 381 x 381 mm Aluminum tray with liners, 508 x 508 mm Aluminum tray with liners, 508 x 762 mm Stackable tray kit for CLS , 305 x 305 mm Stackable tray kit for CLS , 381 x 381 mm Stackable tray kit for CLS , 508 x 508 mm Tilting rack, 49 positions, for 50 ml tubes 32

33 Versa-Orb Mini Digital Orbital Shaker, 1/16 Orbit This Digital Mini Orbital Shaker is a high speed shaker for general laboratory cell culture use. The platform accepts a variety of optional trays. The peg and grommet design offers a simple method to install or change trays. With its brushless DC motor the shaker is designed for minimal maintenance. Digital speed display Locking speed control knob Peg and grommet tray connection Speed range: rpm Orbit: 1,5875 mm / 1/16 Dimensions: 30,2 x 30,5 x 11,4 cm 2-year warranty Cat. No. CLS E CLS CLS CLS CLS CLS Description Orbital shaker, mini, base only Aluminum tray with liners, 305 x 305 mm Aluminum tray with liners, 381 x 381 mm Aluminum tray with liners, 508 x 508 mm Tray, 8-positions for microtiter plate Tray, 32-positions for microtiter plate Versa-Shake Digital Reciprocating Shaker The Versa-Shake reciprocating digital shaker is designed to shake clear plastic cell culture bags from 5 to 50 liters and for general laboratory purposes. The unit incorporates a digital speed control that allows 20 to 240 oscillations per minute. Digital speed control Suction cup feet Speed range: Oscillations / Min. Stroke: 25,4 mm / 1 Max. load: 16 kg evenly distributed Dimensions: 30,2 x 30,5 x 11,4 cm 2-year warranty Cat. No. CLS E CLS CLS CLS CLS Sticky Pad Description Reciprocating shaker, base only, digital Aluminum tray with liners, 305 x 305 mm Aluminum tray with liners, 381 x 381 mm Aluminum tray with liners, 508 x 508 mm Aluminum tray with liners, 508 x 762 mm Cell culture bags for platform: see page 31 Designed for securing containers with flat wide bases Ideal for bottles and dishes that cannot be held by traditional flask clamps Shaking speed (fill volume 25 %): ml, max. 200 rpm l, max. 250 rpm - 3 l, max. 300 rpm l, max. 250 rpm CLS Sticky Pad, 150 x 150 mm 1 CLS Sticky Pad, 200 x 200 mm 1 CLS Sticky Pad, 460 x 460 mm 1 33

34 Cordless, Handheld UV Lamp UV lamps can be used for observing and imaging of DNA and RNA gels. They are essential for medical hygiene, bio-engineering, molecular biology, genetic studies and biological production, anti-counterfeit inspection, pharmaceutical production, criminal and forensic examination and verification. These cordless handheld models can be used wherever needed. The ergonomic handle permits a safe grip even with gloves. The safety switch prevents exposure of user to UV radiation by switching off the lamp if turned upside down. Reliable, high intensity UV radiation Portable, lightweight and ergonomic Safety switch turns unit off if turned upside down Single- or dual wavelength models available Charger and rechargeable batteries included Cat. No. CLS CLS CLS Description UV Lampe, handheld, wavelength 254 nm UV Lampe, handheld, wavelength 365 nm UV Lampe, handheld, dual wavelength 254 und 365 nm Versa Roll Roller Apparatus The Versa-Roll cell production roller apparatus is designed for use in the production of various adherent cells. With up to 50 bottle positions it can provide up to cm 2 surface area. (continued on page 35) Features: Rollers formulated from a chemical-resistant, non-slip EDPM Heavy-duty, maintenance-free DC brushless motors Rubber bumpers, swivel castors and rear guards Fixed frame (series CLS-3855) or modular (series CLS-3857) Frame: powder-coated aluminum Close (6-¼ ) deck to deck space All Position Drive to prevent slipping of lightweight bottles Accommodates standard roller bottles ( mm Ø) in plastic of glass with max. body length of 510 mm Rotation speed: rpm (based on 110 mm bottle) Digital speed display and locking speed control knob Optional equipment: Battery Back-up system Rotation Alarm Slow Speed Kit 34

35 Versa Roll Roller Apparatus (continued) Cat. No. Description Dimensions (overall) (W x D x H) No. of bottle positions Alarm Modular system CLS Deck assembly kit 818,9 x 645,3 x 161,9 mm 5 CLS E Base and 1 Deck 818,9 x 645,3 x 576,2 mm 10 No CLS-3857-A02E Base and 1 Deck 818,9 x 645,3 x 576,2 mm 10 Yes CLS E Base and 2 Decks 818,9 x 645,3 x 738,1 mm 15 No CLS-3857-A03E Base and 2 Decks 818,9 x 645,3 x 738,1 mm 15 Yes CLS E Base and 3 Decks 818,9 x 645,3 x 900,0 mm 20 No CLS-3857-A04E Base and 3 Decks 818,9 x 645,3 x 900,0 mm 20 Yes CLS E Base and 4 Decks 818,9 x 645,3 x 1061,9 mm 25 No CLS-3857-A05E Base and 4 Decks 818,9 x 645,3 x 1061,9 mm 25 Yes CLS E Base and 5 Decks 818,9 x 645,3 x 1223,9 mm 30 No CLS-3857-A06E Base and 5 Decks 818,9 x 645,3 x 1223,9 mm 30 Yes CLS E Base and 6 Decks 818,9 x 645,3 x 1385,8 mm 35 No CLS-3857-A07E Base and 6 Decks 818,9 x 645,3 x 1385,8 mm 35 Yes CLS E Base and 7 Decks 818,9 x 645,3 x 1547,7 mm 40 No CLS-3857-A08E Base and 7 Decks 818,9 x 645,3 x 1547,7 mm 40 Yes CLS E Base and 8 Decks 818,9 x 645,3 x 1709,6 mm 45 No CLS-3857-A09E Base and 8 Decks 818,9 x 645,3 x 1709,6 mm 45 Yes Fixed frame CLS E Base and 1 Deck 818,9 x 645,3 x 576,2 mm 10 No CLS-3855-A02E Base and 1 Deck 818,9 x 645,3 x 576,2 mm 10 Yes CLS E Base and 2 Decks 818,9 x 645,3 x 738,1 mm 15 No CLS-3855-A03E Base and 2 Decks 818,9 x 645,3 x 738,1 mm 15 Yes CLS E Base and 3 Decks 818,9 x 645,3 x 900,0 mm 20 No CLS-3855-A04E Base and 3 Decks 818,9 x 645,3 x 900,0 mm 20 Yes CLS E Base and 4 Decks 818,9 x 645,3 x 1061,9 mm 25 No CLS-3855-A05E Base and 4 Decks 818,9 x 645,3 x 1061,9 mm 25 Yes CLS E Base and 5 Decks 818,9 x 645,3 x 1223,9 mm 30 No CLS-3855-A06E Base and 5 Decks 818,9 x 645,3 x 1223,9 mm 30 Yes CLS E Base and 6 Decks 818,9 x 645,3 x 1385,8 mm 35 No CLS-3855-A07E Base and 6 Decks 818,9 x 645,3 x 1385,8 mm 35 Yes CLS E Base and 7 Decks 818,9 x 645,3 x 1547,7 mm 40 No CLS-3855-A08E Base and 7 Decks 818,9 x 645,3 x 1547,7 mm 40 Yes CLS E Base and 8 Decks 818,9 x 645,3 x 1709,6 mm 45 No CLS-3855-A09E Base and 8 Decks 818,9 x 645,3 x 1709,6 mm 45 Yes CLS E Base and 9 Decks 818,9 x 645,3 x 1871,6 mm 50 No CLS-3855-A10E Base and 9 Decks 818,9 x 645,3 x 1871,6 mm 50 Yes Optional equipment: CLS Batterie Back-up CLS-3854-SPK Slow Speed Kit Roll-In- and large incubators with or without CO 2 from ShelLab/Sheldon Incubators for roller apparatus The Roll-In and large capacity incubators are especially designed to be used in combination with roller apparatus. Please enquire for further incubators also from other manufacturers 35

36 Roller Bottles, Glass Borosilicate glass conforming to ASTM E438, Type 1, Class A specifications With 38 or 51 mm rubber lined black phenolic cap or GL-45 solid or vented PP cap Vented caps ideal for gas exchange in CO 2 eniviroment Cat. No. Description Ø x Length Surface Cs. (mm) Area (cm²) CLS Bottle, GL-45 cap, PP, solid 110 x CLS Bottle, GL-45 cap, PP, solid 110 x CLS Bottle, GL-45 cap, PP, solid 110 x CLS Bottle, GL-45 cap, PP, vented 110 x CLS Bottle, GL-45 cap, PP, vented 110 x CLS Bottle, GL-45 cap, PP, vented 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x CLS Bottle, GPI phenolic cap, rubber lined 110 x Replacement caps CG GPI phenolic cap, rubber lined 25 CG GPI phenolic cap, rubber lined 25 For GL-45 replacement caps see pages Roller Bottles, Graduated, TC-Treated, Polystyrene (PS) TC-treated roller bottles (CELLTREAT ) manufactured from Polystyrene Hydrophilic surface for cell attachment Black printed graduations Sterile, individually bagged Screw cap either solid or vented Cat. No. Description Surface Cs. Area (cm²) CLS-1189-S01 Roller bottle, TC-treated, solid cap CLS-1189-V01 Roller bottle, TC-treated, vented cap CLS-1188-S01 Roller bottle, TC-treated, solid cap CLS-1188-V01 Roller bottle, TC-treated, vented cap CLS-1188-ES1 Roller bottle, TC-treated, solid cap CLS-1188-EV1 Roller bottle, TC-treated, vented cap