MiniGrid Modular Switch Plates (Unfurnished)

Transcription

1 MiniGrid Plate Switches (Modular) The smooth modern lines of the Define accessory plate will fit easily into traditional and contemporary designs alike. Define flat plate switches are developed largely as a modular range based on the large selection of switch modules available in the CLICK MINIGRID Module range. Simple, single screw fixing of modules offers the simplest possible means of installing and replacing modules.

2 Product Range Finish Comparison Brushed Steel (BS) Black Nickel (BN) Pearl Nickel (PN) Polished Chrome (CH) Stainless Steel (SS)

3 Product Range MiniGrid Modular Switch Plates (Unfurnished) FP**401## 1 Gang Plate Single Aperture FP**402## 1 Gang Plate Twin Aperture FP**403## 1 Gang Plate Triple Aperture FP**404## 2 Gang Plate (2+2) Aperture FP**406## 2 Gang Plate (3+3) Aperture FP**426## 2 Gang Plate 6 In-Line Aperture FPBS401WH FPBN402BK FPPN403WH FPSS404BK FPCH406WH FPSS426BK Errors & Omissions excluded. Specification is subject to change without notice. ** Denotes Plate Finish, ## Insert Colour

4 Inceptor Product Dimensional Max - Electrical Drawings Parameters (mm) FP**401 FP**402 FP** FP** FP**406 FP** Errors & Omissions excluded. Specification is subject to change without notice. ** Denotes Plate Finish

5 Technical Specification MiniGrid Modular Switch Plates (Unfurnished) Material Composition Front Plate: Stainless Steel Insert: Urea Earth Terminal: Brass Earth Strap: Mild Steel Cable Size Back Box Depth Modular Warranty IP Rating Operational Temperature Dependent on modules fitted Dependent on modules fitted Yes 10 Years IP20-5 o to +40 o C Standards BS 5733 : A1 : 2014 Additional Information Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal. Interchangeable with modules in the MINIGRID system. Errors & Omissions excluded. Specification is subject to change without notice.

6 DECLARATION OF CONFORMITY 1. Issuer Name Scolmore International Limited 2. Issuer Address 1 Scolmore Park, Landsberg, Lichfield Road Industrial Estate, Tamworth, Staffordshire, B79 7XB 3. Object(s) of Declaration Define Range a. Group Modular Switch Plates (Unfurnished) b. Model No. FP-401, FP-402, FP-403, FP-404, FP-406, FP The object of the declaration described above is in conformity with the requirements of the following Legislations: 5. All products contained within the aforementioned comply with the relevant standards and requirements listed below. BS 5733 : A1 : I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications. The unit complies with all applicable Essential Requirements of the Directives. In conjunction with the above all manufacture and process controls are in accordance with ISO 9001:2008 Signed, for and on behalf of: Scolmore International Limited Steven Bettson BSc - Senior Technical Support Engineer 15