B/W PAN/TILT FIXED DOME CAMERA

Transcription

1 B/W PAN/TILT FIXED DOME CAMERA OWNER S MANUAL INSTALLATION AND OPERATION MODEL: BEFORE INSTALLING OR OPERATING THE SYSTEM, PLEASE READ THIS MANUAL. CA1022

2 Important Safety Instructions Remove all packaging and clear it away before plugging in the CA 1022 Dome Camera Read the installation instructions carefully before proceeding Do not attempt to repair any part of the system by opening the casing. If the camera requires repair, phone If storing the system, choose a cool, dry location. Protect the camera from dust and do not store any heavy objects on top of the unit. Do not install the camera near water, oil, or heat source areas such as a stove. Use of unauthorized cables and accessories are not recommended. Attaching incompatible parts may damage the system. 1

3 Table of Contents Section Page Important Safety Installations...1 Table of Contents...2 Introduction...3 Packing List...3 Features...4 Key Components...4 Installation procedure...5 Installing the Dome Camera with a Control unit and Surveillance Monitor...6 Installing the Dome Camera with a Control unit, Surveillance monitor and 2 or 4 cameras...6 Trouble Shooting Guide...7 Specifications...7 Warranty...8 2

4 Introduction Congratulations on choosing the Home Sentinel CA 1022 B/W Pan/Tilt Fixed Dome Camera. The CA 1022 system is reliable, versatile, and is produced with high quality standards. This versatile dome camera must be used with the PT 400 Pan/Tilt control unit for the motorized mechanism to pan and tilt. This dome camera and controller can be integrated with your existing Home Sentinel video surveillance system. This compact smoked acrylic dome blends with any décor and provides discrete video surveillance. The built-in microphone provides audio monitoring as well. The motorized controls has the ability to give you a viewing angle of 355 horizontal and 85 vertical. Packing List 1. B/W Pan/Tilt Dome Camera ft Din Cable (6 pin) 3. 6 ft Din Cable 4. Mounting hardware 3

5 Features A reliable, high quality 1/3 CCD Camera providing optimum image clarity Electronic IRIS for use in applications with a wide angle spectrum of lighting Pan/Tilt controls (with a PT 400 Pan/Tilt Control unit) 3.6mm lens, 1 lux (f2.0) Operating Temperature : -10 C ~ +50 C Key Component Adaptor plate Ø3 x 20 screw Hook Base (hold base when you twist to attach the dome to adaptor plate) Swivel Bubble 4

6 Installation Procedure FRONT VIEW TOP VIEW 107 A 105 RED (+12V) WHITE (VIDEO OUT) Before installation, make sure: (A) Proper lift equipment or ladder to reach the installation (B) Electrical power is not connected to the dome and surveillance monitor during installation To install the dome camera on a ceiling or wall follow these procedures: 1. Twist open the clear dome cover in a counter-clockwise direction to reach inside the dome camera. (turn at the swivel section of the camera) 2. Place the PT400 Control unit on a flat surface 3. Connect the 6 ft Din cable from the controller, marked To Monitor from one of the channel outputs CH 1,2,3 or 4 to the corresponding camera input CA 1,2,3 or 4 on the back of the monitor. 4. Run the 65 ft Din cable (included with the dome camera) from the wired lead of the dome camera to the control unit, marked To camera CH 1,2,3 or Please note : If the camera input on the controller is on CH 1 then the monitor output on the controller must also be a corresponding CH 1 6. Attach the adapter plate on the ceiling or wall, using the 3 screws provided (M3 X 20 screw). 7. Twist the base of the dome camera onto the adapter plate already on the ceiling/wall. Note : Do not hold the clear bubble or swivel when you attach the dome to the adapter 8. Repeat steps 1 to 6 to install other dome cameras

7 CA1 CA2 CA3 CA4 Installation Procedure Installing the Dome Camera(s) with a Control unit and Surveillance Monitor PAN/TILT DOME CONTROLLER PT 400 MONITOR TO MONITOR CH1 CH2 CH3 CH4 TO CAMERA CH1 CH2 CH3 CH4 CAMERA 4 CAMERA 3 POWER AC IN PUT ALARM OUT AUDIO IN VIDEO IN V C R SLAVE IN OUT OUT REMOTE AUDIO VIDEO CAMERA 2 NC N.O COM CAMERA IN PUT CAMERA 1 PAN/TILT DOME CAMERA CA 1022 Installing the Dome Camera(s), Control unit, surveillance monitor and 2 or 3 cameras MONITOR PAN/TILT DOME CONTROLLER PT 400 TO MONITOR TO CAMERA CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 POWER AC IN PUT AUDIO IN CAMERA 2 VIDEO IN V C R SLAVE IN OUT OUT ALARM OUT NC N.O COM CA1 CA2 CA3 CA4 CAMERA IN PUT REMOTE AUDIO VIDEO CAMERA 1 CAMERA 4 CAMERA 3 CCD CAMERA PAN/TILT DOME CAMERA CA

8 Troubleshooting Guide Before calling for service, please use the following guide for possible solutions Problem Solution No picture Picture, but no sound Pan or Tilt does not work Check that the camera is plugged in Check that the cable connection at the monitor is plugged in Check the volume control on the monitor. Check that nothing is impeding the microphone at the camera location Call for service Specifications Power Source 12V (from controller) Image sensor 1/3 B/W CCD Active pixels EIA : 512(H) X 492(V) Image sensor area 4.8(H) X 3.7(V)mm Signal to noise 46dB Electronic IRIS 1/100,000 seconds Synchronization Internal Signal format EIA : 525 lines, 2:1 interlace Video output 1.0V p-p (75 ohm) Audio output 600 ohm line level Ambient temperature -10 C ~ +50 C Ambient humidity 0-96% Non-condensing Resolution Greater than 380 TV lines Minimum illumination 1 Lux Lens 3.6mm Power consumption Max. 2.4W 7

9 Warranty Home Sentinel warrants this home security product ( The Product ) to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty does not cover any expenses incurred in the removal and reinstallation of the product. This warranty is offered to the original purchaser of the product only. If the product should prove defective within the warranty period, return the product postage prepaid to Home Sentinel, along with your dated sales slip or other proof of purchase which will establish your eligibility for the warranty. Home Sentinel will at its option, replace or repair the product free of charge and return the product to you postage prepaid. This warranty dose not apply to the product which has been damaged, misused, altered or repaired by anyone other than a Home Sentinel authorized service facility. ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE, AND NO PERSON IS AUTHORIZED TO ASSUME FOR HOME SENTINEL ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. HOME SENTINEL EXPRESSLY DISCLAIMS LIABILITY IN CONNECTION WITH THE SALE OF DAMAGES CAUSED BY THE PRODUCT. THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS. This warranty gives you specific legal right, and you may also have other rights which vary from state to state or province to province. Some states/provinces do not allow limitation to how long warranty lasts, so the above limitation may not apply to you. Additionally, some states/provinces do not allow the exclusion of limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you. 8

10 DISTRIBUTED BY: MANSOOR ELECTRONICS LTD. 310 ALDEN ROAD, MARKHAM, ONTARIO, CANADA L3R 4C1 TEL: (905) FAX: (905) TOLL FREE: