Providing the accessories you need from quality brands you can rely on.

Transcription

1

2 Providing the accessories you need from quality brands you can rely on. Imaging Accessories Electronic Accessories Mobile Phone Accessories Everything you need is at your fingertips at Sporting Goods Tel , Fax ,

3 Manfrotto Photo Accys MANFROTTO 030 HEXAGONAL PLATE W/1/4in FIXING SCREW $44.95 MANFROTTO 030 HEXAGONAL PLATE W/3/8in FIXING SCREW $44.95 Hexagonal quick release plate with 1/4 screw. Hexagonal quick release plate with 3/8 screw. MANFROTTO 030 ARCHITECTURAL HEXAGON PLATE W/1/4in FIXING SCREW 030ARCH-14 $54.95 MANFROTTO HEXAGONAL PLATE W/VHS 1/4in LOCATING PIN 030VHS-14 $54.95 Provides alignment for 90 shots with 35mm SLR camera Hexagonal quick release plate with VHS Locating Pin 1/4

4 MANFROTTO CAMERA STUD FOR 035 SUPER CLAMP MANFROTTO 055 LEVELLING CENTRE COLUMN 037 $ LC $ Plugs into Super Clamp 035 socket To mount cameras, directly or with a camera head. 3/8 and 1/4 threads. Allows quick levelling of photo or video heads Levelling half ball at the top of the tripod s centre column Top plate angle independent from the rest of the tripod 3/8-inch male screw for attachment to a photo or video head Built-in bubble spirit level MANFROTTO MONOPOD BELT POUCH MANFROTTO ADAPTER 1/4in TO 3/8in 080 $ $19.95 Worn on a belt, the easy to use 080 pouch offers support for the base of a Monopod. Female 1/4-20 to Male 3/8 Thread Adapter

5 MANFROTTO ADAPTER SMALL 1/4in - 3/8 088LBP $24.95 MANFROTTO HEAVY DUTY VIDEO DOLLY FOR XB 117B 114 $ Converts 1/4 screw to 3/8 Heavy duty, super sturdy dollies are designed for use with large still and video tripods They feature large 127mm individually braked wheels with cable guards Folds for transporting. MANFROTTO HEAVY DUTY VIDEO DOLLY SPIKED FEET FOR 545G/GB 546G/GB 114MV $ MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FOOT FOR 695CX 116SC1 $64.95 Heavy duty, super sturdy dollies are designed for use with large still and video tripods They feature large 127mm individually braked wheels with cable guards Folds for transporting. A rubber suction cup foot with retractable stainless steel spike The suction cup increases the suitable area of the foot of the monopod by almost 20 times, giving much greater stability when needed The foot can be removed and replaced at will. For monopod 695CX.

6 MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FEET (3) FOR 190CXPRO4 116SCK3 $ MANFROTTO RUBBER SPIKED FOOT FOR 695CX 116SP1 $39.95 Rubber suction cup foot (set of 3) with retractable stainless steel spike The suction cup increases the suitable area of the feet, giving much greater stability when needed The foot can be removed and replaced at will For tripod: 190CXPRO4 Reversible rubber/metal spiked foot supplied with a dedicated fixing tool The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion For monopod 695CX MANFROTTO SPIKED FEET (3) FOR 190CXPRO4 116SPK3 $79.95 SUCTION CUP/RETRACTABLE FEET (3) for MK/ MT293A4, MKBFRA4-BH 12SCK3 $ Reversible rubber/metal spiked feet (set of 3) supplied with a dedicated fixing tool The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion For tripod: 190CXPRO4 Suction Cup Feet for Aluminum Tripods Compatible with MT/MK293A4 - MKBFRA4

7 RUBBER SPIKED FEET (3) for MK/MT293A4, MKBFRA4-BH 12SPK3 $84.95 MANFROTTO 131 HEXAGONAL PLATE W/1/4in FLAT SCREW $49.95 Spiked feet for Aluminum Tripods Compatible with MT/MK293A4 - MKBFRA4 Hexagonal quick release plate with 1/4 screw. MANFROTTO 130 HEXAGONAL PLATE W/3/8in FLAT SCREW $49.95 MANFROTTO ACCESSORY ARM FOR 2 HEADS 131D $ Hexagonal quick release plate with 3/8 screw. Mounts on any column with 3/8 thread, this side arm allows positioning of two heads on a 90 perpendicular angle.

8 MANFROTTO ACCESSORY ARM BLACK FOR 2 HEADS MANFROTTO ACCESSORY ARM BLACK FOR 4 HEADS 131DB $ DDB $ Mounts on any column with 3/8 thread, this side arm allows positioning of two heads on a 90 perpendicular angle. Mounts on any column with 3/8 thread, this side arm allows positioning of two heads on a 90 perpendicular angle Two positional head mounts on the side arm allowing the possible mounting of four heads. MANFROTTO MAGIC ARM W/RC2 QR PLATE MANFROTTO FLASH SHOE 1/4in MALE ATTACHMENT 143RC $ S $29.95 Your extra arm in the studio One lever locks three pivot points Supplied with a quick release camera plate with secondary safety lock based on the 200PL-14 system Ideal for mounting a camera or a camcorder exactly at the angle you need it. Fits any 5/8 female sockets Works especially well with 035 Super Clamp. Flash shoe with 1/4 male attachment

9 MANFROTTO SPECIAL ADAPTER 1/4in TO 3/8in (SET OF 5) 148KN $21.95 MANFROTTO TILT-TOP HEAD WITH QUICK RELEASE PLATE 155RC $ These special bushings adapt a 3/8- Inch thread to 1/4- Inch- 20 Great for adapting heads or cameras Set of 5 Not strictly a tripod head, but an extremely versatile camera support for compact and 35mm cameras used in conjunction with Super Clamp 035 Supplied with quick release camera plate and secondary safety lock. SUCTION CUP, RETRACTABLE FEET (3) for MK/MT 293A3 190XPRO4 190GO! 15SCK3 $89.95 RUBBER SPIKED FEET (3) - MK/MT293A3, MK/MT 293A3 190XPRO4 190GO! 15SPK3 $69.95 Suction Cup Feet for Aluminum Tripods Compatible with MT/MK293A3 - MT/ MK294A4 - MK/MT190XPRO4

10 MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FOOT FOR 676B 694CX 559B 160SC1 $59.95 MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FEET (3) for MT055CXPRO4 160SCK3 $84.95 A rubber suction cup foot with retractable stainless steel spike The suction cup increases the suitable area of the foot of the monopod by almost 20 times, giving much greater stability when needed The foot can be removed and replaced at will For monopod 694CX. Rubber suction cup foot (set of 3) with retractable stainless steel spike The suction cup increases the suitable area of the feet, giving much greater stability when needed The foot can be removed and replaced at will For tripods: 190XB, 190XDB, 190XPROB, 190CX3, 190CXPRO3, 055CXPRO4 MANFROTTO RUBBER SPIKED FOOT FOR 676B 694CX 559B 160SP1 $36.95 MANFROTTO RUBBER SPIKED FEET (3) for 055CXPRO4 160SPK3 $79.95 Reversible rubber/metal spiked foot supplied with a dedicated fixing tool The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion For monopod 694CX. Reversible rubber/metal spiked feet (set of 3) supplied with a dedicated fixing tool The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion For tripods 190XB, 190XDB, 190XPROB, 190CS3, 190CXPRO3, 055CXPRO4

11 MANFROTTO APRON SUPPORT FOR TRIPODS MANFROTTO ALUMINUM TABLE FOR PROJECTORS 166 $ $89.95 Three compartments hang below the column supported by straps above the leg locks Fits most Manfrotto tripods Made of sturdy aluminum, this 9.8 x (25cm x 35cm) platform can support up to 44lbs (20kg) Ideal as a projector or monitor stand. MANFROTTO 190 SHORTER CENTRE COLUMN 190XSCC $84.95 SUCTION CUP/RETRACTABLE FEET (3) for MK/MT 294A3 190X3 190XPRO3 19SCK3 $ The shorter column improves the tripod s positioning flexibility. If you need to work with legs set at the third angle of inclination (about 60 ) but still need to be able to move the camera up and down to achieve perfect adjust your shot perfectly, this shorter column replaces the one supplied with the tripod. Suction Cup Feet for Aluminum Tripods Compatible with MT/MK294A3 - MK/MT190XPRO3

12 RUBBER SPIKED FEET (3) for MK/MT 294A3 190X 190XPRO3 19SPK3 $69.95 MANFROTTO RECTANGULAR PLATE W/1/4in FIXING SCREW and 3/8in BUSHING 200PL $34.95 Spiked feet for Aluminum Tripods Compatible with MT/MK294A3 - MK/MT190XPRO3 Ideal for quickly attaching all compatible Manfrotto products equipped with RC2/Q2 attachment to the camera The compact dimensions and the lightweight aluminum construction allow to stay always attached under the camera without adding weight and dimension The grip rubber maintains the camera safely attached providing maximum precision when moving and setting the camera MANFROTTO ARCHITECTURAL RECTANGULAR PLATE W/3/8in FIXING SCREW 200PLARC14 $49.95 MANFROTTO ARCHITECTURAL RECTANGULAR PLATE W/1/4in FIXING SCREW 200PLARC38 $49.95 Rapid Connect Architectural Mounting Plate with 1/4 screw. Rapid Connect Architectural Mounting Plate with 3/8 screw.

13 MANFROTTO UNIVERSAL ANTI-TWIST SPOTTING SCOPE PLATE 200USS $ MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FOOT FOR 679B 680B 558B 204SC1 $69.95 This adapter plate has been specifically designed to eliminate unwanted rotation of the spotting scope during viewing Its universal design means it can be used to mount all makes of spotting scope, no matter what their foot shape (square, rectangular, trapezium), on any Manfrotto two-way head with rapid RC2 connector system The adapter is made from machine-tooled aluminum with a black anodized finish A rubber suction cup foot with retractable stainless steel spike The suction cup increases the suitable area of the foot of the monopod by almost 20 times, giving much greater stability when needed The foot can be removed and replaced at will. MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FEET (3) FOR 055CXPRO3 204SCK3 $79.95 MANFROTTO RUBBER SPIKED FEET (3) for MT055CXPRO3 204SPK3 $79.95 Rubber suction cup foot (set of 3) with retractable stainless steel spike The suction cup increases the suitable area of the feet, giving much greater stability when needed. The foot can be removed and replaced at will For tripods: 055CX3, 055CXPRO3 Reversible rubber/metal spiked feet (set of 3) supplied with a dedicated fixing tool The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion For tripods: 055CX3, 055CXPRO3

14 MANFROTTO CAMERA MOUNTING ADAPTER W/3/8in THREAD 208 $44.95 MANFROTTO CAMERA MOUNTING ADAPTER HEXAGONAL PIN W/3/8in THREAD 208HEX $47.95 Allows use of 3/8 camera mounting plate in to 16mm socket Compatible with 035 Super Clamp and 484RC2 or 486RC2 Ball Head Diameter: 59.5mm. The main feature of the 208HEX is the hexagonal pin which, compared to the 208 s round one, gives more grip when used to hold heavy cameras mounted on photo or video heads in combination with accessories like the super clamp 035. SUCTION CUP/RETRACTABLE FEET (3) for MK/ MT055XPRO3 22SCK3 $84.95 RUBBER SPIKED FEET (3) for MK/MT055XPRO3 22SPK3 $79.95 Suction Cup Feet for Aluminum Tripods Compatible with MK/MT055XPRO3 Spiked feet for Aluminum Tripods Compatible with MK/MT055XPRO3

15 MANFROTTO TRIPOD SNOW SHOES MANFROTTO SPIKED FOOT FOR MONOPOD 230 $ $49.95 Attach to tripod feet or monopods to provide stability in snow, mud or soft ground (set of 3). Converts 679, 680 and 681 series monopods rubber foot to a spiked foot. MANFROTTO PUMP CUP WITH FLAT BASE MANFROTTO CAR WINDOW POD 241FB $ $59.95 Suction Cap for lightweight photographic and video equipment, such as 35mm SLR, digital cameras and lightweight video cameras The 60mm diameter disc with a 3/8 W male thread is built in the pump cup and enables you to mount most of Manfrotto s heads. Can be fixed to surfaces up to 60mm thick Has 2 x 3/8 male threads for mounting ball head and camera.

16 MANFROTTO VARIABLE FRICTION ARM W/RC2 QR PLATE 244RC $ MANFROTTO FLASH ADAPTER FOR METZ 248 $29.95 Articulated arm with large locking knob Variable friction and locking of arm obtained by adjusting the knob Supplied with quick release camera plate with secondary safety lock based on the 200PL-14 camera plate mechanism Ideal for mounting a photographic or video camera exactly at the angle you need it A special long 1/4 camera screw used in conjunction with the hexagonal 030 camera plate which allows you to fit the Metz flash bracket. MANFROTTO SUCTION CUP/RETRACTABLE SPIKED FOOT FOR 681B 557B 250SC1 $69.95 MANFROTTO RUBBER SPIKED FOOT FOR 681B 557B 250SP1 $39.95 A rubber suction cup foot with retractable stainless steel spike The suction cup increases the suitable area of the foot of the monopod by almost 20 times, giving much greater stability when needed The foot can be removed and replaced at will. Reversible rubber/metal spiked foot supplied with a dedicated fixing tool The spike is made of a special hard anodized aluminum alloy extremely resistant to corrosion For monopod: 681B

17 MANFROTTO EXTENSION FOR TABLE TOP TRIPOD 1/4in THREAD 259B $59.95 MANFROTTO ADAPTER FOR NIKON FLASH 262 $29.95 The Manfrotto 259B Extension is designed to be used with the Bogen Manfrotto 209 Table Top Tripod This extension gives 6-10 height adjustment for your pod. Converts Nikon flash mount to universal flash bracket. MANFROTTO 5/8inSURVEY ADAPTER FOR TRIPOD MANFROTTO TELEPHOTO LENS SUPPORT 273 $ $ Converts tripod head screw from 3/8 threads to 5/8 Support for medium telephoto lens The length of the bracket is adjustable to take different length lenses and different diameters by tilting the Tilt Head 234RC (included) Length from head to lens support adjustable from 200 to 295mm Attachments: four 3/8 female and three 1/4 female.

18 MANFROTTO ADDITIONAL CAEMRA PLATE FOR 322RC2 322RA $64.95 MANFROTTO RECTANGULAR QR ADAPTER 323 $79.95 Camera plate attachment assembly for the 322RC2 can also be available as a separate accessory in case you want the camera to be as close as possible to the tripod s center of gravity, which provides a higher rate of stability. Supplied with 1/4 camera fixing screws Fixing 1/4 and 3/8 tread 200PL rectangular plate included. MANFROTTO MACRO BRACKET SUPPORT MANFROTTO HOT SHOE 2 AXIS BUBBLE LEVEL 330B $ $79.95 Allows two flash heads to be mounted with a camera onto a tripod head Attachments: 3/8 & 1/4 female threads & 1/4 camera fixing screw. The 337 is a double axis spirit level that mounts to the hot shoe of any standard 35mm SLR camera to help you achieve a finer degree of accuracy and consistency in panoramic photo sequences.

19 MANFROTTO LEVELLING BASE 338 $ MANFROTTO TABLE MOUNT CAMERA SUPPORT W/234 MONOPOD HEAD 355 $89.95 The 338 is fitted between tripod and head and is used in combination with tripods that don t have built-in leveling mechanisms Its three adjustment dials enable the operator to make fine, finger tip adjustments up to +/- 5 degrees to ensure the camera is perfectly level The dials also have locking rings to ensure stability once the right position is reached This simple table mounting support is supplied with three holes for fixing or clamping Comes complete with the Monopod Tilt Head 234. MANFROTTO WALL MOUNT CAMERA SUPPORT W/234 MONOPOD TILT HEAD 356 $89.95 MANFROTTO SLIDING PLATE ADAPTER W/357PLV PLATE 357 $94.95 As for the 355 but designed to be mounted to a wall Comes complete with the Monopod Tilt Head 234. This Quick Release adapter gives you the freedom to remove the camera from the head and put it on any other support Supplied with two 1/4 and two 3/8 camera screws Sliding travel of plate: 80mm.

20 MANFROTTO LONG LENS SUPPORT MANFROTTO SHOULDER BRACE FOR MONOPOD $ $59.95 This Manfrotto Long Lens Support is a very useful addition to any photographer s complement of attachments. Complete with Super Clamp 035 and Mini Ball Head 482. Fully adjustable between 40cm and 60cm with a simple telescopic locking device. Designed to fit to the top end of any make of Monopod to give additional stability Adjustable length with pivoting shoulder support. MANFROTTO SET OF 3 LEG WARMERS FOR 055 TRIPOD SERIES 380 $64.95 MANFROTTO indove TAILin PLATE ADAPT 384 $ Set of 3 Manfrotto Patented Leg Warmers, which have a zip system so they can be easily fitted and will not slip down in use Offers good grip Protect the legs and insulate your hands when using the tripod in cold weather. Supplied with 1/4 and 3/8 camera fixing screws Fixing 1/4 and 3/8 thread 384PL and 384PLARCH plates included.

21 MANFROTTO indove TAILin PLATE W/1/4 FIXING SCREW 384PL-14 $49.95 MANFROTTO indove TAILin ARCHITECTUR PLATE W/1/4in FIXING SCREW 384PLARC14 $54.95 Plate with 1/4 screw. Provides alignment for 90 shots with 35mm SLR camera 384PLARCH-14 with 14 screw. MANFROTTO TABLE CENTERPOST AIR CUSHIONED MANFROTTO LONG LENS MONOPOD BRACKET 385 $ $ Centre column equipped with a standard 58mm disc and three grub screws as used on Manfrotto 190 and 055 tripods Column can be combined with any head from our range The bottom of the column has an 80mm disc which can be screwed directly to countertop/table or, alternatively, bolted to the included second disc on the underside of the countertop Column diameter: 30mm/26mm. Minimum Height 36cm Maximum Height 62cm Weight 1.1 kg Load capacity 10 kg Specifically developed for use with very long lenses on Monopods Friction base which enables the bracket to pan on Monopod, also can be used on a tripod Two rubber hand grips plus rubber protection to prevent damage to lens when tilted to maximum Variable center height adjustment in three steps.

22 MANFROTTO QUICK RELEASE PLATE ADAPTER 394 $99.95 MANFROTTO DOUBLE ARTICULATING ARM 2-SECTION W/143BKT CAMERA BRACKET 396B-2 $ This Manfrotto 394 low profile Quick Release Plate Adapter is supplied with 1/4 and 3/8 fixing screws on both camera and tripod ends. Includes 410PL plate. Equipped with 2 built-in spirit levels. Excellent performance: robustness, lightness and versatility The 396 family has been developed to provide greater robustness than the 196 range and to support heavier loads (upto 5kg), though keeping versatility thanks to its extendable sliding arm system (extends upto 860mm), further enhanced by its quick lock system MANFROTTO ACCESSORY PLATE W/1/4in a 3/8in FIXING SCREWS 410PL $39.95 MANFROTTO LONG PLATE W/DOUBLE ATTACHMENT 430 $ PL (RC4 style) supplied with 1/4 and 3/8 screw. Allows two camera mounting positions Supplied with 2 x 1/4 and 2 x 3/8 camera fixing screws.

23 MANFROTTO BALL CAMERA LEVELLER 3/8i ATTACHMENT 438 $ MANFROTTO MICRO POSITIONING SLIDING PLATE 454 $ The 438 is fitted between tripod and head and provides easy, fast leveling for tripods without built-in leveling mechanisms Range of movement: 10 Ideal for macro photography to make precise positioning movements to achieve the perfect framed shot For QTVR and other precise copy/ repro work, the new sliding plate has finger-tip control for hairs-breadth positioning but with a simple lock-release lever for fast set-up Two plates can be interlocked at 90 degrees for full lateral/forward/back movement (over 120mm) MANFROTTO LEVELING ADAPTER FOR COLUMNS IN HORIZONTAL POSITION 553 $ MANFROTTO LEVELING CENTER COLUMN FOR 055 SERIES 555B $ Working with the centre column in the horizontal position on Manfrotto tripod models MDEVE tripod family has always caused a slight difficulty, in that the head remains at 90 to the ground making it more difficult to position the camera correctly for shooting Our innovative system means you can quickly level your photo or video head without needing to make time-consuming adjustments to the length and angle of each single tripod leg One of the most common problems in still photography and, above all, video has been resolved by Manfrotto, thanks to the use of a 50mm diameter levelling half ball mounted at the top of a tripod centre column so as to make the angle of the top plate independent of the rest of the tripod

24 MANFROTTO LEVELING CENTER COLUMN FOR 190 SERIES 556B $ MANFROTTO HEXAGONAL PLATE ADAPTER W/303 PLATE 625 $ Our innovative system means you can quickly level your photo or video head without needing to make time-consuming adjustments to the length and angle of each single tripod leg One of the most common problems in still photography and, above all, video has been resolved by Manfrotto, thanks to the use of a 50mm diameter levelling half ball mounted at the top of a tripod centre column so as to make the angle of the top plate independent of the rest of the tripod Hexagonal plate supplied with 1/4 and 3/8 camera fixing screws Fixing 1/4 and 3/8 tread 030 hexagonal plate included Equipped with 2 built-in spirit levels. MANFROTTO BASIC PANORAMIC HEAD ADAPTER 627 $89.95 MANFROTTO UNIVERSAL FOLDING BASE FOR 679B 680B 681B 678 $ Basic panoramic adapter that can be mounted on top of a head, monopod, or tripod The adapter camera platform has a graduated scale in millimeters to set the camera position during different shooting sequences and a dual 1/4 and 3/8 camera fixing screw This accessory can be connected to a head, monopod, or tripod by a 3/8 female attachment. This unique accessory allows you to add a base made of three foldable high strength steel legs to the Monopods 679, 680, 681 After using them, the legs can be folded and stored inside the bottom section of the monopod, ready in a few seconds when needed.

25 MANFROTTO QR PLATE FOR MODO/DIGI W/1/4in FIXING SCREW 785PL $24.95 MANFROTTO UTLITY TRAY 29X29cm (11 4inX11 4in) 844 $ Plate supplied with 1/4 camera fixing screw. Optional accessory tray makes it easy to keep meters and extra film holders at arms length. MANFROTTO L BRACKET W/Q2 QR PLATES MANFROTTO L BRACKET W/Q5 QR PLATES MS050M4-Q2 $ MS050M4-Q5 $ The Manfrotto L bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position Manfrotto L Bracket combines lightness with maximum support The magnesium structure provides a sturdy solution in terms of stability, lightweight, and transportability for all types of equipment The Manfrotto L bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position Manfrotto L Bracket combines lightness with maximum support

26 MANFROTTO L BRACKET WITH RC4 QUICK RELEASE MANFROTTO TOP LOCK QUICK RELEASE ADAPTER MS050M4-R4 $ MSQ6 $ The Manfrotto L bracket is a unique accessory designed for all the professional photographer who would like to change photo formats in an easy and fast way by quickly flipping the camera from horizontal to vertical position. Manfrotto L Bracket combines lightness with maximum support. The magnesium structure provides a sturdy solution in terms of stability, lightweight, and transportability for all types of equipment. This adaptor allows you to fit the Manfrotto Q6 Top Lock quick release system to an existing photo head. The Top Lock system has been developed to offer photographers a fast, easy to use and very secure camera quick release mechanism suitable for heavy pro equipment. The camera plate clicks into the clamp from above, and as soon as it engages, it triggers a safety pin that stops the plate and camera from sliding out accidentally. MANFROTTO TOPLOCK QUICK RELEASE PLATE MSQ6PL $62.95 MANFROTTO TWIST GRIP - UNIVERSAL SMARTPHONE CLAMP MTWISTGRIP $69.95 Camera attachment plate for use with Manfrotto s Arcacompatible Q6 Top Lock quick release system, developed to offer photographers a fast, easy to use and very secure quick release mechanism suitable for heavy pro camera equipment. The plate has a redesigned screw, which can be tightened to your camera in a number of different ways: by hand, using the special flip-handle; using a coin, inserted into the wide slot; or with the supplied allen key for maximum stability. TwistGrip is the premium universal smartphone clamp from Manfrotto, specifically devised for all smartphone users interested in smartphone photography who want to increase the potential of their device.

27 ROUND PLATE WITH 1/4 INCH FIXING SCREW FOR COMPACT ACTION TRIPOD KIT RROUND-PL $19.95 Rounded camera plate. New round quick release system is fast, adaptable and foolproof. Effortless camera attachment by hand. Compatible with Compact Action.

28

29 We re helping retailers become more profitable. In today s fast-paced retail environment, the right partner can make a world of difference. Our commitment to our clients is simple yet powerful we work closely with them to maximize the potential of each and every electronic, wireless telecom, photographic imaging, digital imaging, and optical product they carry. How do we do this? By taking the time to understand the marketplace in which our customers operate as well as their existing product mix, by looking for ways to build on their success, by introducing new opportunities and leading edge products, and by providing after-sales service that is second to none. Satisfied customers, improved sales, and increased profit margins. At Gentec International, we achieve these results by working in partnership with our clients. We do our homework we understand the challenges retailers face and what their customers want. We visit our clients stores to get a clear sense of what they carry and how they re being presented. Then, we recommend ways that we believe can help increase their sales. This might include additions to the range of products they carry or fresh approaches to packaging, display, and promotion. Finally, we ensure that our clients have everything they need to make the sale from custom displays to point-of-purchase support. And, throughout the year, we make regular visits to provide in-store detailing. Our clients count on us for effortless ordering and error-free fulfillment. Gentec International s high cube, state-of-the-art computerized 100,000 square foot warehouse and distribution centre allows us to offer efficient, seamless service to our customers. We manage our stock with the goal to eliminate back orders. In fact, based on our clients forecasts, we guarantee we ll have 100% of the items they need in stock, 100% of the time. Plus, when they place an order with Gentec International, most shipments leave our warehouse within 24 hours. And we make every effort to ensure that the shipment is accurate so that everything they ordered arrives. At Gentec International, we also make regular investments to ensure that our ability to serve our clients continually improves. A reputation for service and a head for business. The same principles our clients used to build their companies are at work in ours. With the support of over 100 people in the Gentec family worldwide, our management team has the depth of experience and breadth of knowledge needed in today s fast-paced world. And, we re constantly evaluating our people, processes, and products to ensure that we are exceeding our customers expectations. Together we achieve the extraordinary

30