Macon Plastics, Inc. Solvent Weld SCH 40/80 DWV

Transcription

1 Catalog #210SDWV MP Macon Plastics, Inc. & DWV Fittings P R I C E L I S T Solvent Weld /80 DWV Effective Date: 02/02/15 Catalog : 210SDWV Revision: D Supercedes: 209SDWV Not sure if you have a current catalog? Check to view our current catalogs online. Multipliers DWV DWV P.O. Box Macon, GA Fax

2 & DWV Fittings Catalog #210SDWV Table of Contents Adapter Bushing... 1 Adapter Coupling... 1 Bushing, Flush... 7 Bushing, Increaser Concentric... 8 Bushing, Increaser Eccentric... 8 Cap... 2 Cleanout Adapter with Plug, Female... 2 Cleanout Adapter with Plug, Male... 2 Coupling, Increaser Concentric... 9 Coupling, Increaser Eccentric... 9 Coupling, Internal... 2 Coupling, Repair... 2 Coupling, Stop... 3 Cross... 3 Downspouts, Hub... 2 Downspouts, Male... 2 Elbows; 11¼, 22½, 30, 45 and ,5 Elbows; Street 11¼, 22½, 30, 45 and ,5 Flange, Blind... 6 Flange, Van Stone... 6 Flange, Van Stone Spigot... 6 Male Adapter... 7 Offset... 6 Plug, Spigot... 3 Plug, Threaded Countersunk... 3 Plug, Threaded Raised Head... 3 P-Trap... 6 P-Trap with Cleanout... 6 Tee Tee, Cleanout 2-way Tee, Cleanout with Plug Tee, Sanitary Tee, Sanitary Double Tee-Wye (Combination) Tee-Wye, Double (Double Combination) Terms Wye Wye, Double Note Drawings in this catalog are representations and are not for engineering purposes. Contact the factory for submittals. All fittings in this catalog are for non-pressure service and should not be confused with their pressure rated equivalents.

3 Catalog #210SDWV & DWV Fittings Adapter Bushing Adapter Bushing 3034 SDR35 x IPS DR 18 x C900 DR * * * x16 * * * * * * * * * * Adapter Bushing Adapter Coupling x 3034 DR SDR35 x IPS DR x15 * x15 * * x14 * x16 * * Adapter Bushing Adapter Coupling C900 DR18 x IPS DR 18 x C-900 DR 18 4 * * * * * * * * * * *

4 & DWV Fittings Catalog #210SDWV Female Cleanout Adapter With Plug Hub x Fipt Male Cleanout Adapter With Plug Male x Fipt P.O.A * * * * * * *22518 P.O.A *54728 P.O.A *22519 P.O.A *54729 P.O.A * * * * * * *22528 P.O.A *54738 P.O.A *22529 P.O.A *54739 P.O.A Available with countersunk plugs. Advise Customer Service when ordering. Downspout Adapter DS x Hub Cap Hub x Cap 4x4x x5x x6x x5x4 * x5x6 * x6x x8x8 * Downspout Adapter DS x Male * * * * * * * *33638 P.O.A *33639 P.O.A Internal Coupling Male x Male 4x4x x5x x6x x5x4 * x5x6 * x6x x8x8 * * * * * * Repair Coupling * * * * * * * * * * * * * * * * *99048 P.O.A * *99049 P.O.A

5 Catalog #210SDWV & DWV Fittings Stop Coupling Cross x Spigot Plug Male x Cap Threaded Plug, Raised Head Mipt Threaded Plug, Countersunk Mipt * * * *33678 P.O.A *33679 P.O.A * * * * * * * *07443 P.O.A * *07444 P.O.A P.O.A * * * * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x16 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x16 * * x18 * * x4 * *33716 P.O.A x6 * *33717 P.O.A x8 * *33718 P.O.A x10 * *33719 P.O.A x12 * *33720 P.O.A x14 * *33721 P.O.A x16 * *33722 P.O.A x18 * *33723 P.O.A x20 * *33724 P.O.A x4 * *33725 P.O.A x6 * *33726 P.O.A x8 * *33727 P.O.A x10 * *33728 P.O.A x12 * *33729 P.O.A x14 * *33730 P.O.A x16 * *33731 P.O.A x18 * *33732 P.O.A x20 * *33733 P.O.A x24 * *33734 P.O.A

6 & DWV Fittings Catalog #210SDWV 11 1/4 Elbow 11 1/4 Elbow * * * *33743 P.O.A *33744 P.O.A * * * *33753 P.O.A *33754 P.O.A Elbow 15 Elbow 6 * * * * * * * * * * * * * * * *34468 P.O.A * *34469 P.O.A * * * * * * * * * * * * * * * *34478 P.O.A * *34479 P.O.A /2 Elbow 22 1/2 Elbow * * * *33763 P.O.A *33764 P.O.A Elbows can be made to any angle. Contact factory for pricing * * * *33773 P.O.A *33774 P.O.A

7 Catalog #210SDWV & DWV Fittings 30 Elbow 30 Elbow * * * *33783 P.O.A *33784 P.O.A * * * *33793 P.O.A *33794 P.O.A Elbow 45 Elbow * * * *33803 P.O.A *33804 P.O.A * * * *33813 P.O.A *33814 P.O.A Elbow 90 Elbow * * * *33823 P.O.A *33824 P.O.A Elbows can be made to any angle. Contact factory for pricing * * * *33833 P.O.A *33834 P.O.A

8 & DWV Fittings Catalog #210SDWV Blind Flange Offset 1/2 Thick 1 Thick 6 * * * * * * * * * * * * * * * * * * *25512 P.O.A *25513 P.O.A *25514 P.O.A *25515 P.O.A *25516 P.O.A *25517 P.O.A Please specify advance and offset when ordering. Check with factory on any offsets over 36 advance length. Van Stone Flange Flange x Hub P-Trap 6 * * * * * * * * * * * * Van Stone Spigot Flange Flange x Spigot P-Trap with Cleanout 6 * * * * * * * * * * *

9 Catalog #210SDWV & DWV Fittings Flush Bushing Male Adapter Hub x Mipt 4x6 * x8 * x8 * x10 * x10 * x10 * x12 * x12 * x12 * x12 * x14 *99075 P.O.A x14 *99076 P.O.A x14 *99077 P.O.A x14 *99078 P.O.A x14 *99079 P.O.A x16 *99080 P.O.A x16 *99081 P.O.A x16 *99082 P.O.A x16 *99083 P.O.A x16 *99084 P.O.A x16 *99085 P.O.A x18 *99086 P.O.A x18 *99087 P.O.A x18 *99088 P.O.A x18 *99089 P.O.A x18 *99090 P.O.A x18 *99091 P.O.A x18 *99092 P.O.A x20 *99093 P.O.A x20 *99094 P.O.A x20 *99095 P.O.A x20 *99096 P.O.A x20 *99097 P.O.A x20 *99098 P.O.A x20 *99099 P.O.A x20 *99100 P.O.A x24 *99101 P.O.A x24 *99102 P.O.A x24 *99103 P.O.A x24 *99104 P.O.A x24 *99105 P.O.A x24 *99106 P.O.A x24 *99107 P.O.A x24 *99108 P.O.A x24 *99109 P.O.A * * * * * *

10 & DWV Fittings Catalog #210SDWV Increaser Bushing Concentric Hub x Male Style A Increaser Bushing Eccentric Hub x Male Style B Style C 4x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x16 * * x * x * x * x * x * x18 * * x18 * * x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * *33964 P.O.A x20 * *33965 P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * *33973 P.O.A x24 * *33974 P.O.A x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x16 * * x * x * x * x * x * x18 * * x18 * * x20 * *34048 P.O.A x20 * *34049 P.O.A x20 * *34050 P.O.A x20 * *34051 P.O.A x20 * *34052 P.O.A x20 * *34053 P.O.A x20 * *34054 P.O.A x20 * *34055 P.O.A x24 * *34056 P.O.A x24 * *34057 P.O.A x24 * *34058 P.O.A x24 * *34059 P.O.A x24 * *34060 P.O.A x24 * *34061 P.O.A x24 * *34062 P.O.A x24 * *34063 P.O.A x24 * *34064 P.O.A

11 Catalog #210SDWV & DWV Fittings Increaser Coupling Concentric Style A Increaser Coupling Eccentric Style B Style C 4x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x16 * * x * x * x * x * x * x18 * * x * x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * * P.O.A x20 * *33919 P.O.A x20 * *33920 P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * * P.O.A x24 * *33928 P.O.A x24 * *33929 P.O.A x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x16 * * x * x * x * x * x * x18 * * x18 * * x20 * *34003 P.O.A x20 * *34004 P.O.A x20 * *34005 P.O.A x20 * *34006 P.O.A x20 * *34007 P.O.A x20 * *34008 P.O.A x20 * *34009 P.O.A x20 * *34010 P.O.A x24 * *34011 P.O.A x24 * *34012 P.O.A x24 * *34013 P.O.A x24 * *34014 P.O.A x24 * *34015 P.O.A x24 * *34016 P.O.A x24 * *34017 P.O.A x24 * *34018 P.O.A x24 * *34019 P.O.A

12 & DWV Fittings Catalog #210SDWV Cleanout Tee With Plug x Fipt Tee x Hub 6x *33610 P.O.A x *33611 P.O.A x *33612 P.O.A x *33613 P.O.A x *33614 P.O.A x *33615 P.O.A x *33616 P.O.A x *33617 P.O.A x *33618 P.O.A x *33619 P.O.A x *33620 P.O.A x *33621 P.O.A x *33622 P.O.A x *33623 P.O.A x4 * *33624 P.O.A x6 * *33625 P.O.A x8 * *33626 P.O.A x10 *29237 P.O.A *33627 P.O.A x12 *29238 P.O.A *33628 P.O.A x14 *29239 P.O.A *33629 P.O.A x4 * x6 * x8 * x10 *29243 P.O.A x12 *29244 P.O.A x14 *29245 P.O.A x16 *29246 P.O.A Two-Way Cleanout Tee x Hub 4x x x x * x * x * x * x * x * x * x * x * x * x * x * x * x * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x4 * *34211 P.O.A x6 * *34212 P.O.A x8 * *34213 P.O.A x10 * *34214 P.O.A x12 * *34215 P.O.A x14 * *34216 P.O.A x16 * *34217 P.O.A x18 * *34218 P.O.A x20 * *34219 P.O.A x4 * *34220 P.O.A x6 * *34221 P.O.A x8 * *34222 P.O.A x10 * *34223 P.O.A x12 * *34224 P.O.A x14 * *34225 P.O.A x16 * *34226 P.O.A x18 * *34227 P.O.A x20 * *34228 P.O.A x24 * *34229 P.O.A

13 Catalog #210SDWV & DWV Fittings Sanitary Tee x Hub Double Sanitary Tee x 6x * x * x * x * x * x4 * * x6 * * x8 * * x10 * * x4 * * x6 * * x8 * * x10 * * x12 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x16 * * x4 * * x6 * * x8 * * x10 *66341 P.O.A * x12 *66342 P.O.A * x14 *66343 P.O.A * x16 *66344 P.O.A * x18 *66345 P.O.A * x4 * *69211 P.O.A x6 * *69212 P.O.A x8 * *69213 P.O.A x10 *66349 P.O.A *69214 P.O.A x12 *66350 P.O.A *69215 P.O.A x14 *66351 P.O.A *69216 P.O.A x16 *66352 P.O.A *69217 P.O.A x18 *66353 P.O.A *69218 P.O.A x20 *66354 P.O.A *69219 P.O.A x4 * *69220 P.O.A x6 * *69221 P.O.A x8 * *69222 P.O.A x10 *66358 P.O.A *69223 P.O.A x12 *66359 P.O.A *69224 P.O.A x14 *66360 P.O.A *69225 P.O.A x16 *66361 P.O.A *69226 P.O.A x18 *66362 P.O.A *69227 P.O.A x20 *66363 P.O.A *69228 P.O.A x24 *66364 P.O.A *69229 P.O.A x4 * *69681 P.O.A x6 * *69682 P.O.A x4 * * x6 * * x8 * * x4 * * x6 * * x8 * * x10 *66824 P.O.A *69689 P.O.A x4 * * x6 * * x8 * * x10 *66828 P.O.A *69693 P.O.A x12 *66829 P.O.A *69694 P.O.A x4 * * x6 * * x8 * * x10 *66833 P.O.A *69698 P.O.A x12 *66834 P.O.A *69699 P.O.A x14 *66835 P.O.A *69700 P.O.A x4 * * x6 * * x8 * * x10 *66839 P.O.A *69704 P.O.A x12 *66840 P.O.A *69705 P.O.A x14 *66841 P.O.A *69706 P.O.A x16 *66842 P.O.A *69707 P.O.A x4 * * x6 * * x8 * * x10 *66846 P.O.A *69711 P.O.A x12 *66847 P.O.A *69712 P.O.A x14 *66848 P.O.A *69713 P.O.A x16 *66849 P.O.A *69714 P.O.A x18 *66850 P.O.A *69715 P.O.A x4 * *69716 P.O.A x6 * *69717 P.O.A x8 * *69718 P.O.A x10 *66854 P.O.A *69719 P.O.A x12 *66855 P.O.A *69720 P.O.A x14 *66856 P.O.A *69721 P.O.A x16 *66857 P.O.A *69722 P.O.A x18 *66858 P.O.A *69723 P.O.A x20 *66859 P.O.A *69724 P.O.A x4 * *69725 P.O.A x6 * *69726 P.O.A x8 * *69727 P.O.A x10 *66863 P.O.A *69728 P.O.A x12 *66864 P.O.A *69729 P.O.A x14 *66865 P.O.A *69730 P.O.A x16 *66866 P.O.A *69731 P.O.A x18 *66867 P.O.A *69732 P.O.A x20 *66868 P.O.A *69733 P.O.A x24 *66869 P.O.A *69734 P.O.A

14 & DWV Fittings Catalog #210SDWV Tee-Wye (Combination) x Hub Double Tee-Wye (Double Combination) x 6x * x * x * x * x * x4 * * x6 * * x8 * * x10 * * x4 * * x6 * * x8 * * x10 * * x12 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x16 * * x4 * * x6 * * x8 * * x10 *33396 P.O.A * x12 *33397 P.O.A * x14 *33398 P.O.A * x16 *33399 P.O.A * x18 *33400 P.O.A * x4 * *34266 P.O.A x6 * *34267 P.O.A x8 * *34268 P.O.A x10 *33404 P.O.A *34269 P.O.A x12 *33405 P.O.A *34270 P.O.A x14 *33406 P.O.A *34271 P.O.A x16 *33407 P.O.A *34272 P.O.A x18 *33408 P.O.A *34273 P.O.A x20 *33409 P.O.A *34274 P.O.A x4 * *34275 P.O.A x6 * *34276 P.O.A x8 * *34277 P.O.A x10 *33413 P.O.A *34278 P.O.A x12 *33414 P.O.A *34279 P.O.A x14 *33415 P.O.A *34280 P.O.A x16 *33416 P.O.A *34281 P.O.A x18 *33417 P.O.A *34282 P.O.A x20 *33418 P.O.A *34283 P.O.A x24 *33419 P.O.A *34284 P.O.A x4 * * x6 * *34287 P.O.A x4 * * x6 * * x8 * *34290 P.O.A x4 * * x6 * * x8 * * x10 * *34294 P.O.A x4 * * x6 * * x8 * * x10 * *34298 P.O.A x12 * *34299 P.O.A x4 * * x6 * * x8 * * x10 * *34303 P.O.A x12 * *34304 P.O.A x14 * *34305 P.O.A x4 * * x6 * * x8 * * x10 * *34309 P.O.A x12 * *34310 P.O.A x14 * *34311 P.O.A x16 * *34312 P.O.A x4 * * x6 * * x8 * * x10 * *34316 P.O.A x12 * *34317 P.O.A x14 * *34318 P.O.A x16 * *34319 P.O.A x18 * *34320 P.O.A x4 * *34321 P.O.A x6 * *34322 P.O.A x8 * *34323 P.O.A x10 * *34324 P.O.A x12 * *34325 P.O.A x14 * *34326 P.O.A x16 * *34327 P.O.A x18 * *34328 P.O.A x20 * *34329 P.O.A x4 * *34330 P.O.A x6 * *34331 P.O.A x8 * *34332 P.O.A x10 * *34333 P.O.A x12 * *34334 P.O.A x14 * *34335 P.O.A x16 * *34336 P.O.A x18 * *34337 P.O.A x20 * *34338 P.O.A x24 * *34339 P.O.A

15 Catalog #210SDWV & DWV Fittings Wye x Hub Double Wye x 6x * x * x * x * x * x * x * x * x * x * x * x * x * x * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x * x4 * *34376 P.O.A x6 * *34377 P.O.A x8 * *34378 P.O.A x10 * *34379 P.O.A x12 * *34380 P.O.A x14 * *34381 P.O.A x16 * *34382 P.O.A x18 * *34383 P.O.A x20 * *34384 P.O.A x4 * *34385 P.O.A x6 * *34386 P.O.A x8 * *34387 P.O.A x10 * *34388 P.O.A x12 * *34389 P.O.A x14 * *34390 P.O.A x16 * *34391 P.O.A x18 * *34392 P.O.A x20 * *34393 P.O.A x24 * *34394 P.O.A x * x * x * x * x * x4 * * x6 * * x8 * * x10 * * x4 * * x6 * * x8 * * x10 * * x12 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x16 * * x4 * * x6 * * x8 * * x10 * * x12 * * x14 * * x16 * * x18 * * x4 * *34431 P.O.A x6 * *34432 P.O.A x8 * *34433 P.O.A x10 * *34434 P.O.A x12 * *34435 P.O.A x14 * *34436 P.O.A x16 * *34437 P.O.A x18 * *34438 P.O.A x20 * *34439 P.O.A x4 * *34440 P.O.A x6 * *34441 P.O.A x8 * *34442 P.O.A x *34443 P.O.A x12 * *34444 P.O.A x14 * *34445 P.O.A x16 * *34446 P.O.A x18 * *34447 P.O.A x20 * *34448 P.O.A x24 * *34449 P.O.A

16 & DWV Fittings Catalog #210SDWV TERMS Two percent discount for cash if paid no later than 10 days following date of invoice. Purchaser should inquire about the trade and cash discount in effect at any particular time. Purchaser agrees to pay a finance charge of 1½ percent per month (18 percent annual rate) on all past due accounts. If purchaser's account is past due and is placed with an attorney for collection or suit, the purchaser agrees to pay attorney and court fees. All orders placed by accounts with a past due balance will be placed on credit hold until the account is brought current or other arrangements are made. FREIGHT All DWV goods are sold F.O.B. point of shipment with full freight allowed to all shipping points within the United States except Alaska and Hawaii on net order value of $1, or more. Seller shall not be liable for failure to deliver or delays in delivery due to causes beyond Seller's control or the control of its suppliers and carriers. MINIMUM ORDER Orders must be at least $ net to be accepted. CANCELLATION Nonstandard or specially produced fittings cannot be cancelled once production has begun. Large quantities of a single product may require a non-cancelable agreement. RETURNED GOODS Goods will not be accepted for return without a Return Goods Authorization issued by Macon Plastics, Inc. A restocking charge and freight costs of returned goods (plus out freight if applicable) will be assessed. Special fittings or unreasonably large quantities are non-returnable. Fittings must be clean, of current design and in resalable condition. LIMITED WARRANTY Since the use of this product is beyond the control of the seller, liability of the seller shall be limited to replacement of NOTICE product. Possession of this price list is not an offer to sell. All Macon Plastics, Inc. warrants that its products are orders are subject to acceptance by Macon Plastics, Inc. s manufactured free of defects in material and workmanship for a shown on this price sheet supersede all previous issues, and are period of one year from date of purchase. subject to change without notice. The limit of liability for failure of any of the products to Orders shall not be binding until approved at Seller's office meet foregoing warranties or breach of any warranty, express, in Macon, Georgia. implied or statutory shall be to supply an equivalent amount of This agreement shall be governed in accordance with the product or refund of purchase price for any products returned to it laws of the State of Georgia, therefore all litigation will take place in within thirty (30) days of failure and found by Macon Plastics, Inc. to the State of Georgia. be defective. This warranty does not apply to a product that has been subjected to; (a) improper storage or installation other than in accordance with ASTM D2321; (b) accident, damage, abuse or misuse; (c) abnormal or unusual operating conditions or applications; (d) operating conditions or applications above the rated capacity for the product; (e) operating conditions or applications not made known to Macon Plastics, Inc. prior to the date of the sale of the product; or (f) a purpose of application in any way different from that for which the product was designed. Due to the widely varying conditions under which these products are used or installed, if these products are not installed within current industry standards, Macon Plastics, Inc. offers no warranty as to the length of service or suitability for any particular purpose of the products. In no event shall Macon Plastics, Inc. be liable for incidental or consequential damages. Any action for breach of warranty must be brought within twelve (12) months from the date of delivery. Macon Plastics, Inc. retains the right to make changes or improvements from time to time in their products. 14 DISCLAIMER OF OTHER WARRANTIES The warranty provided above is strictly limited to its terms and is in lieu of all other warranties, express, implied and statutory. Macon Plastics, Inc. specifically disclaims any implied warranties of merchantability or fitness for particular purpose. Purchaser specifically understands and agrees that Macon Plastics, Inc., it's successors, assigns, directors, officers, agents and employees shall not be liable in tort, whether based on negligence, strict liability, or any other theory of tort liability, for any action or failure to act in respect to the manufacture, preparation for sale, sale, delivery, or use of Macon Plastics, Inc.'s products. It is the parties' intent to absolve and protect Macon Plastics, Inc. and Macon Plastics, Inc.'s successors, assigns, directors, officers, agents and employees from any and all tort liability. Purchaser expressly agrees that its sole and exclusive remedy for breach of warranty set forth above, for any tort related conduct, or for any other cause of action, shall be the remedies set forth above. Purchaser further specifically understands and agrees that, except provided, no remedy shall be available to purchaser, including, but not limited to claims for incidental, consequential, special or punitive damages, for any cause whatsoever, or injury to or death of persons or damage to property or any other consequential economic or incidental loss. Under no circumstances will Macon Plastics, Inc. be liable for loss of anticipated profits or any other loss caused by reason of the non-operation of, or the increased expense of operation caused by Macon Plastics, Inc.'s products. This exclusion shall apply to all claims, whether sounding in tort, contract or otherwise and shall apply to all damages. CLAIMS FOR SHORTAGE OR DAMAGE Shortage claims must be made within ten (10) days from receipt of goods. Claims for lost shipments, goods damaged in transit, or error in shipment must be made by consignee with the delivering carrier.