Third Party Tested. Sam Roberts & Associates, Inc.
|
|
- Opal Mills
- 6 years ago
- Views:
Transcription
1 Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes D Applications The most complex installations require the most advanced fittings. Injection molded Perfect Fit DWV fittings from Plastic Trends eliminate typical problems resulting from installing a DWV system with inconsistent, inaccurate, or non-certified fittings. When installing or specifying Perfect Fit DWV you can count on a 45 bend being exactly that, a 45 bend. Literally from every angle, Plastic Trends understands the importance of accuracy and consistency on the job site and provides you with a perfect fit from roof to grade. Perfect Fit DWV fittings make installation of the system quicker, easier and less costly. Productivity gains are significant when Perfect Fit DWV fittings are specified and installed. Combine with our fabricated fittings to ensure a trouble-free installation. Certifications Perfect Fit PVC Solvent Weld DWV Molded Fittings are third party tested and listed by NSF, UPC, and CSA to meet specifications defined in ASTM D 2665, F 1866, and CSA B181.2, where applicable. Fabricated fittings conform to ASTM F Short Specs 4 through 12 injection molded solvent weld Drain, Waste, and Vent (DWV) fittings shall be manufactured in accordance with ASTM D2665, F1866, F2135, and CSA B181.2, as applicable. Injection molded solvent weld DWV fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D2665, F1866, and ASTM F2135, as applicable; and by the Canadian Standards Association (CSA) to meet CSA B181.2 as applicable. They shall be certified by the International Association of Plumbing and Municipal Officials (IAPMO) to meet the requirements of the Uniform Plumbing Code (UPC), as applicable. Product Spotlights Test Tees Plastic Trends is the only manufacturer to offer molded threaded test tees with plugs available up to 12 in diameter featuring the most compact branch in the industry. Test tees are commonly used in DWV systems around columns or in raceways because it is in these areas where space is often a critical factor. Plastic Trends test tees are offered with a raised or countersunk plug. Refer to page D2 for available configurations and pricing. ATTENTION: Plastic Trends fittings are not to be used with compressed air or gases. Plastic Trends does not recommend that piping systems that include its products be tested with compressed air or gases. Third y Tested Fit-Rite PVC Adjustable Floor Flange An exclusive addition to the Plastic Trends Perfect Fit DWV product line. Plastic Trends is the only manufacturer to offer this innovative product. Adjustable to any floor height whether it is tile over concrete or linoleum over plywood. It can be reduced with a 4 x 3 coupling or a 4 x 3 90 closet bend and still fit in a 2 x 10 joist. Refer to page D8 for available configurations and pricing. Sam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax: North Texas 1220 Round Table Dr. Dallas, Texas Fax:
2 Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Page D1 Additional Sizes Available upon Request * Denotes Molded Fitting Non-Stock items are non-cancelable, Third party non-returnable tested and listed by CSA, NSF and UPC Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2 Page D2 Stan Roberts & Associates, Inc Houston Dallas Straight Tee HxHxH 45 Degree Wye HxHxH *4 x 4 D *4 x 4 D *6 x 4 D *6 x 4 D *6 x 6 D *6 x 6 D *8 x 4 D *8 x 4 D *8 x 6 D *8 x 6 D *8 x 8 D *8 x 8 D *10 x 4 D *10 x 4 D *10 x 6 D *10 x 6 D *10 x 8 D *10 x 8 D *10 x 10 D *10 x 10 D *12 x 4 D *12 x 4 D *12 x 6 D *12 x 6 D *12 x 8 D *12 x 8 D *12 x 10 D *12 x 10 D *12 x 12 D *12 x 12 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 4 D x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 20 D , x 20 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 20 D , x 20 D , x 24 D , x 24 D , Test Tee with Countersunk Plug HxHxFIPT Test Tee with Raised Plug HxHxFIPT *4 x 4 D *4 x 4 D *6 x 4 D *6 x 4 D *6 x 6 D *6 x 6 D x 4 D x 4 D *8 x 6 D *8 x 6 D *8 x 8 D *8 x 8 D *10 x 4 D *10 x 4 D *10 x 6 D *10 x 6 D *10 x 8 D *10 x 8 D *10 x 10 D *10 x 10 D *12 x 4 D *12 x 4 D *12 x 6 D *12 x 6 D *12 x 8 D *12 x 8 D *12 x 10 D , *12 x 10 D , *12 x 12 D , *12 x 12 D , x 4 D x 4 D x 6 D , x 6 D , x 8 D , x 8 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D ,672.74
3 Test Tee without Plug HxHxFIPT Solvent Weld DWV Fittings Sanitary Tee (T-Y) HxHxH *4 x 4 D *4 x 4 D *6 x 4 D *6 x 4 D *6 x 6 D *6 x 6 D x 4 D *8 x 4 D *8 x 6 D *8 x 6 D *8 x 8 D *8 x 8 D *10 x 4 D x 4 D *10 x 6 D x 6 D *10 x 8 D x 8 D *10 x 10 D x 10 D *12 x 4 D x 4 D *12 x 6 D x 6 D *12 x 8 D x 8 D *12 x 10 D x 10 D *12 x 12 D x 12 D x 4 D x 4 D x 6 D , x 6 D , x 8 D , x 8 D , x 4 D , x 10 D , x 6 D , x 12 D , x 8 D , x 14 D , Tee Cross HxHxHxH 16 x 4 D , x 4 D x 6 D , x 4 D x 8 D , x 6 D x 10 D , x 4 D x 12 D , x 6 D x 14 D , x 8 D x 16 D , x 4 D x 4 D , x 6 D x 6 D , x 8 D x 8 D , x 10 D x 4 D , x 4 D x 6 D , x 6 D x 8 D , x 8 D x 4 D , x 10 D x 6 D , x 12 D x 8 D , x 4 D , x 6 D , Combo Wye & 1/8 Bend HxHxH (2 Piece) 14 x 8 D , x 4 D x 10 D , x 4 D x 12 D , x 6 D x 14 D , x 4 D x 4 D , x 6 D x 6 D , x 8 D x 8 D , x 4 D x 10 D , x 6 D x 12 D , x 8 D x 14 D , x 10 D , x 16 D , x 4 D x 4 D , x 6 D x 6 D , x 8 D x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 4 D x 14 D , x 6 D , x 16 D , x 8 D , x 18 D , x 10 D , x 4 D , x 12 D , x 6 D , x 14 D , x 8 D , x 4 D , x 10 D , x 6 D , x 12 D , x 8 D , x 14 D , x 10 D , x 16 D , x 12 D , x 18 D , x 14 D , x 20 D , x 16 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 4 D , x 12 D , x 6 D , x 14 D , x 8 D , x 16 D , x 4 D , x 18 D , x 6 D , x 20 D , x 8 D , x 24 D , D * Denotes Molded Assembled Fitting from Molded Components Third party tested and listed by Specifications: CSA, NSF and ASTM UPC D2665, F1866, CSA B181.2 Additional Denotes Assembled Sizes Available from upon Molded Request Components Specifications: ASTM D2665, Non-Stock F1866, CSA items B181.2 are non-cancelable, non-returnable Page D2 Page D3
4 Stan Roberts & Associates, Inc Houston Dallas Double Sanitary Tee (T-Y) HxHxHxH Double 45 Degree Wye HxHxHxH 4 x 4 D x 4 D x 4 D *6 x 4 D x 6 D *6 x 6 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D , x 10 D x 4 D x 4 D x 6 D x 6 D x 8 D , x 8 D x 10 D , x 10 D x 12 D , x 12 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 20 D , x 20 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 20 D , x 20 D , x 24 D , x 24 D , Long Radius Sanitary Tee HxHxH 2-Way Cleanout HxHxH *4 x 4 D *4 x 4 D *6 x 6 D /4 Bend (90) Vent HxH 1/4 Bend (90) Vent SxH *4 D *4 D *6 D *6 D *8 D *8 D *10 D *10 D *12 D *12 D Denotes Assembled from Molded Components * Denotes Molded Fitting Specifications: ASTM D2665, Third F1866, party CSA tested B181.2 and listed by CSA, Page NSF and D3 UPC Additional Sizes Available upon Request Denotes Assembled from Molded Non-Stock Components items are non-cancelable, Specifications: non-returnable ASTM D2665, F1866, CSA B181.2 Page D4
5 Item Size in Item Solvent Weld DWV Fittings Size in 1/4 Bend (90) HxH Long Sweep 1/4 Bend (90) SxH Long Sweep *4 D *4 D *6 D *6 D *8 D *8 D D D D D D D D , D , D , D , D , D , D , D , D 1/6 Bend (60) HxH 1/6 Bend (60) SxH 4 D D D D D D D D D D D D D D D , D , D , D , D , D , /8 Bend (45) HxH 1/8 Bend (45) SxH *4 D *4 D *6 D *6 D *8 D *8 D *10 D *10 D *12 D *12 D D D D D D , D , D , D , D , D , /12 Bend (30) HxH 1/12 Bend (30) SxH 4 D D D D D D D D D D D D D D D D , D , D , D , D , /16 Bend (22.5) HxH 1/16 Bend (22.5) SxH *4 D *4 D *6 D *6 D *8 D *8 D *10 D *10 D *12 D *12 D D D D D D D D , D , D , D , /32 Bend (11.25) HxH 1/32 Bend (11.25) SxH 4 D D D D D D D D D D D D D D D D , D , D , D , D , * Denotes Molded Assembled Fitting from Molded Components Third party tested and listed by Specifications: CSA, NSF and ASTM UPC D2665, F1866, CSA B181.2 Additional Denotes Assembled Sizes Available from upon Molded Request Components Specifications: ASTM D2665, Non-Stock F1866, CSA items B181.2 are non-cancelable, non-returnable Page D4 Page D5
6 Item Cap (H) Stan Roberts & Associates, Inc Houston Dallas Drain Grate (S) Size in Item Size in Spigot Plug (S) *4 D *4 T *6 D *6 T *8 D *8 T *10 D *10 D *12 D *12 D D D D D D D D , D D , D , Male Adapter HxMPT *4 D *4 x 4 D *6 D *6 x 6 D Stop Coupling HxH Denotes Assembled from Molded Components * Denotes Molded Fitting Specifications: ASTM D2665, Third F1866, party tested CSA B181.2 and listed by CSA, Page NSF and UPC D5 Additional Sizes Available upon Request Denotes Assembled from Molded Non-Stock Components items are non-cancelable, Specifications: non-returnable ASTM D2665, F1866, CSA B181.2 Page D6 Repair Coupling HxH *4 D *4 D *6 D *6 D *8 D *8 D *10 D *10 D *12 D *12 D D D D D D D D D , D D , Concentric Reducer Coupling HxH Concentric Reducer Bushing SxH *6 x 4 D *6 x 4 D *8 x 4 D *8 x 4 D *8 x 6 D *8 x 6 D *10 x 4 D *10 x 4 D *10 x 6 D *10 x 6 D *10 x 8 D *10 x 8 D *12 x 4 D *12 x 4 D *12 x 6 D *12 x 6 D *12 x 8 D *12 x 8 D *12 x 10 D *12 x 10 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 14 D x 14 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 4 D , x 4 D x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 20 D , x 20 D ,426.51
7 Eccentric Reducer Coupling HxH Solvent Weld DWV Fittings Eccentric Reducer Bushing SxH 6 x 4 D x 4 D x 4 D x 4 D x 6 D x 6 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 14 D x 14 D x 4 D x 4 D x 6 D x 6 D x 8 D , x 8 D x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 4 D , x 4 D , x 6 D , x 6 D , x 8 D , x 8 D , x 10 D , x 10 D , x 12 D , x 12 D , x 14 D , x 14 D , x 16 D , x 16 D , x 18 D , x 18 D , x 20 D , x 20 D , Expansion Joint Coupling HxH Flush Reducer Bushing SxH 2 x 2 D x 4 D x 3 D x 6 D x 4 D x 8 D x 6 D x 4 D Supplied in Grey PVC 12 x 6 D x 8 D x 10 D D DWV Adapter Coupling HxH (SDR35) Solvent Sewer Hub x Solvent DWV Hub DWV Adapter Bushing SxH (SDR35) Solvent (Short) Sewer Spigot x Solvent DWV Hub *4 x 3 P *3 x 1! P *4 x 4 P *3 x 2 P *6 x 4 P *4 x 1! P *6 x 6 P *4 x 2 P x 8 P *4 x 3 P x 8 P *4 x 4 P x 10 P *6 x 4 P x12 P *6 x 6 P Gasketed DWV Adapter Coupling GxDWV G SDR26 Gasket Sewer Hub x Gasket DWV Hub Gasketed DWV Adapter Bushing SxDWV G SDR26 Chamfer Sewer Spigot x Gasket DWV Hub *4 x 4 H *4 x 4 H *6 x 4 H *6 x 4 H *6 x 6 H *6 x 6 H x 8 H x 8 H x 10 H x 10 H x 12 H x 12 H * Denotes Molded Assembled Fitting from Molded Components Third party tested and listed by Specifications: CSA, NSF and ASTM UPC D2665, F1866, CSA B181.2 Additional Denotes Assembled Sizes Available from upon Molded Request Components Specifications: ASTM D2665, Non-Stock F1866, CSA items B181.2 are non-cancelable, non-returnable Page D6 Page D7
8 Stan Roberts & Associates, Inc Houston Dallas Gasketed DWV Adapter Coupling HxDWV G SDR26 Solvent Sewer Hub x Gasket DWV Hub Gasketed DWV Adapter Bushing SxDWV G SDR26 Solvent Sewer Spigot x Gasket DWV Hub *4 x 4 H *4 x 4 H *6 x 4 H *6 x 4 H *6 x 6 H *6 x 6 H x 8 H x 8 H x 10 H x 10 H x 12 H x 12 H DWV Adapter Bushing SxH (SDR35) Chamfer (Long) Sewer Spigot x Solvent DWV Hub DWV Adapter Bushing SxH (SDR26) Chamfer (Long) Sewer Spigot x Solvent DWV Hub *4 x 4 G x 4 H *6 x 4 G x 4 H *6 x 6 G x 6 H *8 x 8 G x 8 H x 10 L x 10 H x 12 L x 12 H DWV Adapter Sleeve DWV SxG Solvent DWV Spigot x SDR35 Gasket Sewer Hub DWV Adapter Sleeve DWV SxG Solvent DWV Spigot x SDR26 Gasket Sewer Hub *4 x 4 G *4 x 4 H *6 x 6 G *6 x 6 H x 8 L x 8 H x 10 L x 10 H x 12 L x 12 H DWV Adapter Sleeve DWV SxH Solvent DWV Spigot x SDR35 Solvent Sewer Hub Gasketed DWV Hub Adapter SxG Solvent DWV Spigot x Gasket DWV Hub *4 x 4 P *4 x 4 D *6 x 6 P *6 x 6 D x 8 P *8 x 8 D x 10 P x 10 D x 12 P x 12 D Temporary Plug Polyethylene (S) Vertical Riser Adapter SxS *4 x 4 G *4 x 4 T *6 x 6 G *6 x 6 T *8 x 8 G *8 x 8 T In-Line Backwater Valve HxH IntelliCap with 3M Marker Terminal Backwater Valve H *4 x 4 D D *6 x 4 D D x 8 D , D x 10 D , D x 12 D , D IntelliDisc with 3M Marker *4 P1614-SN *4 P1624-SN *6 P1616-SN *6 P1626-SN Fit-Rite Adjustable Closet Flange Locator for 3M Marker *4 D P POR Downspout Adapter (H) Downspout x Solvent DWV Hub Flushmount Downspout Adapter (H) Flushmount Downspout x Solvent DWV Hub *2x3 x 4 D *4x6 x 6 D *3x4 x 3 D *3x4 x 4 D Denotes Assembled from Molded Components * Denotes Molded Fitting Specifications: ASTM D2665, Third F1866, party tested CSA B181.2 and listed by CSA, Page NSF and UPC D7 Additional Sizes Available upon Request Denotes Assembled from Molded Non-Stock Components items are non-cancelable, Specifications: non-returnable ASTM D2665, F1866, CSA B181.2 Page D8
9 Threaded Plug - Raised Female Adapter HxFIPT Solvent Weld DWV Fittings Threaded Plug - Countersunk *4 D *4 D *6 D *6 D *8 D *8 D *10 D *10 D *12 D *12 D Fitting Cleanout SxFIPT *4 x 4 D *4 x 4 D *6 x 6 D *6 x 6 D *8 x 8 D *8 x 8 D *10 x 10 D *10 x 10 D *12 x 12 D *12 x 12 D Female Adapter with Countersunk Plug Fitting Cleanout with Countersunk Plug 4 x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D , x 12 D , Female Adapter with Raised Plug Fitting Cleanout with Raised Plug 4 x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D , x 12 D , Saddle Tee with SS Clamps Solvent Skirt x Solvent Inlet Saddle Wye with SS Clamps Solvent Skirt x Solvent Inlet 6 x 4 D x 4 D x 4 D x 4 D x 6 D x 6 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 14 D x 14 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 14 D x 14 D x 16 D x 16 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 14 D x 14 D x 16 D x 16 D x 18 D x 18 D x 4 D x 4 D x 6 D x 6 D x 8 D x 8 D x 10 D x 10 D x 12 D x 12 D x 14 D x 14 D x 16 D x 16 D x 18 D x 18 D , x 20 D , x 20 D , D * Denotes Molded Assembled Fitting from Molded Components Third party tested and listed by Specifications: CSA, NSF and ASTM UPC D2665, F1866, CSA B181.2 Additional Denotes Assembled Sizes Available from upon Molded Request Components Specifications: ASTM D2665, Non-Stock F1866, CSA items B181.2 are non-cancelable, non-returnable Page D8 Page D9
10 Stan Roberts & Associates, Inc Houston Dallas Skirt Gasket for Saddle Tee Skirt Gasket for Saddle Wye 4 Inlet G Inlet G Inlet G Inlet G Stainless Steel Clamp (QuickLock) U Bend (Two Piece) 6 P x 4 D P x 6 D Page D10 * Denotes Molded Fitting Denotes Assembled from Molded Components Specifications: ASTM D2665, F1866, CSA B181.2
Sam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax:
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 P Applications Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry.
More informationSeries P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series
Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690
More informationSolvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36
Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes Fabricated in Sizes 0 Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry. They
More informationSolvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3" 12" Fabricated in Sizes 10" 36"
Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes " " Fabricated in Sizes 0" " Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry.
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"
eavy Wall Gasketed Sewer Fittings SDR Injection Molded in Sizes " " Fabricated in Sizes " " With a.% thicker wall than SDR and high impact retention ring, Royal Building Product s PVC eavy Wall Gasketed
More informationPVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
More informationPVC SOLVENT WELD SEWER & DRAIN FITTINGS
LIST U41-0418-IP PVC SOLVENT WELD SEWER & DRAIN FITTINGS APRIL 9, 2018 SUPERSEDES U41-1017-IP (OCTOBER 30, 2017) www.ipexna.com For products requiring bar coding, - 1 - www.ipexna.com LIST U41-0418-IP
More informationPVC DWV Drain Waste Vent Fittings
PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS
More informationPVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
More informationPipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE OCTOBER 1, 2018 DWV-PVC 2 x FPT x MPT
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE JANUARY 2, 2019 DWV-PVC 2 x FPT x MPT
More informationADAPTERS. Fig. No. Packaging C $ C x 1 1 / Fig. No.
PVC DWV FITTINGS SUGGESTED LIST PRICES PDWV-0918 Effective September 4, 2018 Supercedes PDWV-0318 of March 19, 2018 Prices and MTO status subject to change without notice Visit our website for the most
More informationORDERS MUST BE PLACED BY ING
MIDLAND METAL MFG Fittings, Valves, Clamps & Accessories for Hose, Pipe and Tube ORDERS MUST BE PLACED BY EMAILING SPECIALS@MIDLANDMETAL.COM PVC DWV FITTINGS 2 WEEK LEAD TIME Use your Midland Metal multiplier
More informationSincerely, Your Partners at Specified Fittings
N E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
More informationDWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices
Discount Codes 07 DWV-PVC through 8 22 VAC Corrected Pricing hi-lited in Yellow DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: July 1, 2014 x FPT KEY:...ub
More informationMacon Plastics, Inc. Solvent Weld SCH 40/80 DWV
Catalog #210SDWV MP Macon Plastics, Inc. & DWV Fittings P R I C E L I S T Solvent Weld /80 DWV Effective Date: 02/02/15 Catalog : 210SDWV Revision: D Supercedes: 209SDWV Not sure if you have a current
More informationPipes and fittings. Drain,Waste & Vent (DWV)
K e y P l a s t i c s I n n o v a t i v e d e s i g n & e x c e p t i o n a l s e r v i c e Pipes and fittings Drain,Waste & Vent (DWV) DWV Pipes and Fittings Contents 3 Pipes 4 Plain, I.O & Access Bends
More informationPIPE FITTINGS - PLASTIC - ABS/DWV ARH A
PIPE FITTINGS - PLASTIC - ABS/DWV ARH 172-251A NIBCO DRAINAGE FITTINGS AUG 7 2015 VENDOR NUMBER 039923 CANCELS APR 3 2015 SOIL PIPE ADAPTER, CAST IRON - Hub x Hub 19400 5800 2" $23.66 $47.32 + 19402 5800
More informationCITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
More informationSincerely, Your Partners at Specified Fittings
N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
More informationDR-18 Gasketed C900 & C907 Fittings ENGINEERED FOR DURABILITY
LIST PC920180410 HARCO LIST ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version of this price list LIST PC920180410 HARCO LIST
More informationWITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
More informationEVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS (NO HUB) DIVISION: PLUMBING SECTION: SANITARY WASTE AND VENT PIPING
ICC-ES Report PMG-1082 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS (NO HUB) DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationBS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS
Soil Waste & Vent Pipes Sweep Bend Sweep Bend with Inspection Opening 91¼ Soil Waste & Vent pipes for solvent weld connection to all fittings. Wall Length Mean Outside Thickness L in per M. Dia. D (mm)
More informationSCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
More informationDWV Systems. Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: < STANDARDS >
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > CSA B181.2 System 15 CAN/ULC S102.2 PVC is the most frequently specified
More informationSection 1. Schedule 80 PVC Piping System. Pipe and Fittings Sizes ¼" to 16"
Section Schedule 80 PVC Piping System Pipe and Fittings s ¼" to 6" Effective September 27, 200 Glossary FP = Female Pipe hread MP = Male Pipe hread S = apered Socket SPG = Spigot End (same dimension as
More informationPVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
More informationDWV Systems Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > System 15 CSA B181.2 System XFR CAN/ULC S102.2 introduction PVC is the
More informationPVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
More informationAir-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
More informationSCHEDULE 80 PVC. List Prices
SCHEDULE 80 PVC List Prices Effective: May 28, 2001 Revised June 2003 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in PVC fittings joints,
More informationContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated
ContainTech Dimensional Data Expertise in Engineered Plastics Dated 3-17-11 Table of Contents Cap... 23 Clean Out... 22 Combo Lateral ( Sanaitry Tee)... 16 Elbow: 90... 9 Elbow: 45... 10 End Seal... 3
More informationSCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
More information2.1 PVC PIPE & FITTINGS DRAINAGE
2.1 pvc DRAINAGE pipe & fittings NOVADRAIN & SUPERTUFF EXTRA Drain Waste and Vent Pipes for Sewer and Drain (NON-PRESSURE APPLICATIONS ONLY) Compliance: Manufactured in accordance with AS / NZS 1260:1999
More informationSCHEDULE 80 CPVC. List Prices
SCHEDULE 80 CPVC List Prices Effective: September 26, 2010 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in CPVC fittings joints, can cause
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More informationSpecialist Drainage. Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system. Specialist Drainage
Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system Vulcathene is a completely purpose-designed chemical resistant plumbing system that has been specified and
More informationSCHEDULE 40 PVC. List Prices
SCHEDULE 40 PVC List Prices Effective: November 14, 2005 Tee 401-003 3/8 100 1.99 401-005 0.64 401-007 0.73 401-010 1 50 1.38 401-012 1 1 /4 25 2.15 401-015 1 1 /2 25 2.61 401-020 2 25 3.80 401-025 2 1
More informationWrot and Cast Pressure Fittings
Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................
More informationCall us on
RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983
More informationDuo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
More informationTerms And Conditions Of Sale
N E S Specified Fittings E S Washington Location Specified Fittings 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location Specified Fittings 483 Airport
More informationUnitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
More informationSOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-0617 Effective June 26, 2017 Supercedes CH-PVC-0315 of March 30, 2015 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
More informationSOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-1018 Effective October 1, 2018 Supercedes CH-PVC-0617 of June 26, 2017 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
More informationCH-PVC-0315 PVC SCHEDULE 80 FITTINGS. Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, coupling - threaded
PVC SCHEDULE 80 FITTINGS CH-PVC-0315 Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, 2012 socket & Threaded fittings Suggested List Prices Subject to Change Without Notice Visit our website
More informationCPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
More informationPrice Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Product Catalogue www.ipexinc.com ISSUE DATE: APRIL 2011 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough
More informationSCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationThe Trade Soil & Waste Product Guide
The Trade Soil & Waste Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Trade Soil & Waste Product Guide. This
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationPotable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
More informationBevel Seat. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN. we strive to:
BEVEL SEAT FITTINGS Bevel Seat For over 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence,
More informationSADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
More informationEVALUATION SUBJECT: PLASTIC COMPRESSION FITTINGS DIVISION: PLUMBING SECTION: DOMESTIC WATER PIPING. Report Holder: PHILMAC PTY LTD
ICC-ES Report PMG-1253 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: PLASTIC COMPRESSION FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 11 16 DOMESTIC WATER PIPING Report
More informationWater Distribution Products. Price List - June 1, 2010
Water Distribution Products Price List - June 1, 2010 2 Elster Perfection Elster Perfection Hydrosert PE Water Fittings Products Hydrosert Mechanical Couplings Hydrosert Elbows 61025 3/4 CTS SDR 9 25 $
More informationChemDrain. ChemDrain CPVC Chemical Waste Drain System DIMENSIONAL CATALOG. (Updated November 13, 2018) DC-CD
DMESOAL AALOG hemdrain hemdrain PV hemical Waste Drain System (Updated ovember 13, 2018) 2005-2018 harlotte Pipe and Foundry ompany D-D hemdrain PV hemical Waste Drain System Dimensions All products manufactured
More informationPP-R & PVC-U Products Catalogue
PP-R & PVC-U Products Catalogue INDEX PP-R Products Page 3 PVC-U Products Page 7 Points To Pay Attention When Installing Ppr Pipes And Fittings Due to their brittle characteristic and behavior below 0
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue www.ipexinc.com ISSUE DATE: APRIL 2015 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough products
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationUSA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
More informationARTPLASTICS PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS. BOUNTYBRASSWARE Designer Bathroom Fittings. Innovative Plumbing Fittings
PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS Innovative Plumbing Fittings BOUNTYBRASSWARE Designer Bathroom Fittings ABOUT US Art Plastics commenced its operations in Bayswater, Perth in February 19.
More informationSpears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
More informationPlumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
More informationStandard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0414 Effective April 28, 2014 Supercedes BLZM-0413R of April 22, 2013 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
More informationstandard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
More informationJune 1, 2017 BOARD OF COUNTY COMMISSIONERS ORANGE COUNTY, FLORIDA
June 1, 2017 BOARD OF COUNTY COMMISSIONERS ORANGE COUNTY, FLORIDA REVISED AMENDMENT NO.3/ CONTRACT NO. Y16-182 TERM CONTRACT FOR COUNTY WIDE ROOF MAINTENANCE AND REPAIR ADVANCED ROOFING, INC. 200 Northstar
More informationViega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
More informationStandard Fittings. Fig. List Incremental UPC Bag Box No. Size Price Order Qty Weight Qty. Qty.
BLZM-0717 Effective July 31, 2017 Supercedes BLZM-0414 of April 28, 2014 Standard Fittings Prices and MTO status subject to change without notice Visit our website for the most current information ADAPTERS
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationDiscount Codes. 05/B5 Inserts - PVC INSERTS - PVC. Cold Water Only. List Prices
Discount Codes 05/B5 s - PVC INSERTS - PVC Cold Water Only List Prices Effective: August 25, 2012 Revised September 2014 2 INSERTS - PVC Products Catalog www.lascofittings.com Pricing Effective August
More informationSYLLABUS FOR PLUMBING & SANITARY TRADE
SYLLABUS FOR PLUMBING & SANITARY TRADE Duration at Skills Training Institute (Spread in three months) : 600 Hrs 1. Introduction to ITI : 3 Hrs 2. Introduction to the Trade : 3 Hrs 3. Introduction to Trade
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue ISSUE DATE: SEPTEMBER 2016 We build tough products for tough environments. Bookmark Our Website www.ipexna.com PRODUCT INFO, TECHNICAL DOCUMENTS, ON-SIGHT TRAINING & MUCH
More informationPVC Effective June 26, 2017 Supercedes PVC-0415 of April 13, Tee Reducing - slip x slip x slip (Cont.) Tee - slip x slip x slip
PVC SCHEDULE 40 PRESSURE FITTINGS PVC-0617 Effective June 26, 2017 Supercedes PVC-0415 of April 13, 2015 Suggested List Prices Subject to Change Without Notice Visit our website for the most current information
More informationFig. List Incremental UPC Packaging No. Size Price Order Qty* Box Skid
PVC Schedule 40 Pressure Fittings PVC-0812 Effective Aug. 27, 2012 Supercedes PVC-0611 dated June 27, 2011 Suggested List Prices Subject to Change Without Notice Visit our website for the most current
More informationPNEUMATIC CONVEYING COMPONENTS
PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying
More informationPE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
More informationPVC, DBII & ENT Conduit & Fittings
PVC, DBII & ENT Conduit & Fittings 6 SECTION August 1, 2010 93 Number Number Trade Size Case Box Price Rigid PVC Conduit CRATE BUNDLE CON10005 1/2" 6000' 100' $ 136.00 CON10007 3/4" 4400' 100' $ 171.00
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue www.ipexna.com ISSUE DATE: NOVEMBER 2017 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough products
More informationRosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
More informationHarrison Machine & Plastic Corporation HARRISON SUPERDUCT FUME EXHAUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG
Harrison Machine & Plastic Corporation HRRISON SUPERDUCT FUME EXHUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 01-01-2018 1 HRRISON SUPERDUCT PVC DUCT PIPE Part No. Size O.D.
More informationPRICE LIST. PE100 Metric. 1 May Electrofusion & Spigot Piping Systems SDR 11 ELECTROFUSION COUPLERS SDR 17 ELECTROFUSION COUPLERS IPA WIPES
109 PRICE LIST 1 May 2018 Electrofusion & Spigot Piping Systems Quality and Standards Plastic Systems is a leading distributor of PE piping systems in New Zealand and carries a comprehensive range of fittings
More informationCONSTRUCTION & DEVELOPMENT MANUAL SUMTER COUNTY, FLORIDA
CONSTRUCTION & DEVELOPMENT MANUAL SUMTER COUNTY, FLORIDA Original: June 1, 2004 Revised: May 31, 2005 Revised: August 8, 2006 Revised: September 1, 2006 Revised: August 20, 2007 Revised: November 1, 2011
More informationPlumbing & Mechanical Product Catalogue
Plumbing & Mechanical Catalogue www.ipexna.com ISSUE DATE: MAY 2018 Potable Water Systems DWV Systems Gas Venting Fire Protection Xirtec PVC and Corzan CPVC Cements and Primers We build tough products
More informationSAFETY re-defined. Backwater Protection. The new Staufix FKA/SWA and Pumpfix F series Top-level backwater protection. Quality Safety Success
SAFETY re-defined Backwater Protection The new Staufix FKA/SWA and Pumpfix F series Top-level backwater protection Quality Safety Success Backwater protection: KE System innovations Body with only mm gradient
More informationEUROMARK RANGE 14.01
EUROMARK RANGE 14.01 COMPANY PROFILE CONTENTS Eurocelt Plastics (Pty)Ltd is a KwaZulu Natal based company producing piping and drainage fittings for both above and below ground applications. Although recently
More informationCURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE IN FITTING & PLUMBING UNDER DEVELOPMENT Prepared By CURRICULUM DEVELOPMENT CELL INSTITUTE OF RESEARCH, DEVELOPMENT, TRAINING,U.P., KANPUR-208002 SIX MONTH CERTIFICATE
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More information