Thermal camera -monokular with range finder Manual PASS

Size: px

Start display at page:

Download "Thermal camera -monokular with range finder Manual PASS"

Ernest Dennis Lester
5 years ago
Views:

1 Thermal camera -monokular with range finder Manual PASS Attention! Before the use you read carefully the operating instructions, was written intentionally around you with all necessary information for a proper use according to the basic security standards to supply!

2 Table of contents 1. Contents Precautions Assignment Technical specifications Appearance and installation ofthe device Basic operation The use of accessories Possible disturbances Rules for storage and transportation..... Thermal camer monokular Hand loop Carryall User guide 1. Contents 2. Precautions It is strictly forbidden to straighten the objective of the device directly on intensive energy sources, such like lasers emitting devices, the sun or objects with more than 500 C because it can lead to the damage of electronic components. Within the scope of the guarantee it is not stuck for the damages caused by wrong use. Protect the device against pushes and mechanical damages. Put out the device not to high temperatures or open flames Wipe no lens and eyepieces with hard and abrasiven materials Store the device not with batteries Hold the device beyond the reach of children. 3. Assignment The Monokular serves for the supervision of moved and stationary objects as well as for the measurement of the distance to them, with insufficient lighting and limited visibility (night, fog, dust etc. )

3 4. Technical specification Model Sensor: pixel resolution / detector distance 336x256/ 17 μm Lens: focal length / relative aperture F40 /1,0 Optical magnification, variety 2,5Х Angle of view, degree 8,1 х 6,1 Digital zoom x2, x4 Sensing distance (Object 0.5x1.8m), m min 1000 Spectral, μm 7,5-13,5 Frequency, Hz 60 Color palettes 14 Micro-Display: Type, resolution OLED 1024x768 Diopteradjustment, D ±4 Removing the exit pupil, mm 25 Rangefinder: measuring distance, m up to 700 Voltage / cells / battery 6В / 2xCR123A Lith / LC ,7В 1000 ма External power supply 9-15В / DC 5,5х2,1 мм Video recording: media (removable), format SD Karte (up to 32 GB), 960х720 avi Continuous operation duration (+ 20 C, without video recording), hours continuous operation (+ 20 C, 2,5 without video recording), hours Operating temperature, C Protective kind after IEC (optionally) IPX5 Dimensions, mm 188x114x66 Weight, kg 0,6 Manual strengthening regulation matrix / delicacy matrix / brightness microdisplay Yes/Yes/Yes Russian English, Menu language German, Spanish Connecting to a smartphone / computer Yes, Wi-Fi

5. Appearance and installation of the device 4 3 2 1 5 6 1. Case 2. Lens 3.

On/ Off button 9. Control button 10. Digital zoom button 11. Recording button 12.

4 5. Appearance and installation of the device Case 2. Lens 3. Rangefinder 4. Ocular 5. Battery slot 6. SD- card slot 7. Strarp 8. On/ Off button 9. Control button 10. Digital zoom button 11. Recording button 12. Remote control button 13. External power connection 14. Power indicator

5 6. Basic operation Turn on the device and get started. Unscrew the battery compartment lid (5) and instal the batteries accordingly on the case (1) given polarity and draw the battery compartment lid firmly. Remove either the external stream spring, while you unscrew the cover of the external stream connection (13). Remove the objective lid (2). Press / from key of the device (8), and the Einschaltanzeige (14) should shine red. Wait for the fact that the picture appears in the eyepiece. The switch-on time amounts 3-5 seconds. With the dioptrischen set ring of the eyepiece achieve the most sharp picture in the eyepiece (see service letters and Icons on the screen in the eyepiece). Put afterwards the device on the observant object and turn the Linsenfokussierring (2) to receive a clear picture of the observed object. If no picture appears more than 5 seconds in the eyepiece and the controlling light (14) is red, check whether the batteries are properly installed in the battery compartment or the external stream connection. The intercoanimal end sparkling of the announcement (14) and the absence of a picture in the eyepiece indicate the need to substitute for the batteries. After ending of the works with the device you switch off him by pressure of the key (8). Management Operating parameters setting (Gain / BRGT / Sens / Polar) The crossing between the parametres occurs through pressure of the regulator (9). Change the parametre values by tricks of the regulator (9). Setting of the sensor strengthening (strengthening). This parametre is recommended to regulate with a small contrast of the temperatures of the observed object or the phenomenon with the surroundings. It varies from-10 to +10 Adjusting of the brightness of the microdisplay (BRGT). It varies from 0 to 30. Delicacy setting (sen). This parametre is only advisable to adapt if there is an object with a high contrast of temperatures relatively as the background in the view field. It varies from 40 to 80. Polarity of the picture (Polar). Change to the polarity of the picture hotly knows / black hotly (only for palettes No. 1 and 14) Digital zoom (Zoom) Press the key (10) repeats to select the optimum enlargement (the elective enlargement is indicated in the view field on the display: 1x, 2x, 4x) Video recording (Rec) If the suitable element is selected in the main menu, the pressure of the record button (11) switches on the admission of the video (960x720, 30fps) on in the slot under the cover (6) used SD maps, on the display there shines a gleaming REC ( ) sign. To switch off the admission, press the key (11) once more. Rangefinder Direct the device upon the object, the distance which you would like to measure and press then the tax key of the range finder (12). On the screen in the middle there is a Sighting range finder, combines the sight with the desired object for ~ 1 second, after 1 sec. flashes of the distance knives (measure). The measuring result appears in the view field. Please, note that the range finder is available only in ZOOM 1x and 2x modes.

6 Main menu Give the main menu of the device, while you hold the regulator (9) low-spirited. Moving the main menu points occurs through tricks of the regulator. Select from menu points by unique pressure of the regulator. The parametre in the elective menu point is also changed by tricks of the regulator, while one confirms the value by pressure of the knob and returns then in the main menu list. Profile device setting. There are three preset profiles with fixed settings and three profiles for user settings. Palette. There are 14 types of color palettes. Polarity. Changing the polarity of the image for palettes # 1 and # 14 (white hot / black hot) is duplicated by briefly pressing "GAIN" on the ring. Video recording module. Setting up the video recorder: works continuously / permanently off / on by pressing the REC button. Wi-Fi-module. Enable / disable the Wi-Fi module. Production of thermo matrix. The setting of the delicacy strengthening of the sensor varies from-10 to +10. Duplicated by short pressure of "GAIN" on the ring Adapt the brightness of the microdisplay (Microdisplay brightness).it varies from 0 to 30. It is duplicated by short pressure of "GAIN" on the ring. Indicate really contrast. Turn on / off the increased contrast of the display. Thermo matrix delicacy.it varies from 40 to 80. It is duplicated by short pressure of "GAIN" on the ring Distance position.the position on the screen of the result of the measurement of the distance to the object by the range finder (on top / below). Status strip.the status of the service-status strip on the screen (on top / below). Menüposition. Position on the main menu display (on top / middle / below). Language.The choice of the Schnittstellensprache: In Russian, English, German, Spanish. Put back of the settings.put back the main settings on the work settings.

then you begin the Wi Finetwork search on your computer / Smartphone.

7 Bandaging of a Monokulars with a computer or a Smartphone about Wi-Fi. To connect the Monokular to a computer or a Smartphone, make sure in the main menu of the device that a video recording module and a WiFi module is activated in the Monokular and then you begin the Wi Finetwork search on your computer / Smartphone. Connect She with a Wi Fi-access point with the name "NVD", the password is " " Begin the Internet browser (or FTP client) and give in the address line: ftp://192,168. 0,110, then the family list of the SD map in the device becomes available. Choose in the indicated list the desired videofile (files with the enlargement. avi) and click on it to download them into your computer / Smartphone.

8 7. The use of accessories In the device it is possible, about a plug (13) or a portable external stream spring with a source tension of 8-14,5 V and a DC 5. 5x for 2. 1 plugs an external stream spring with a tension of To connect V (vehicle board net) 8. Possible disturbances Thermal Imaging Monocular is a complicated electronic optical-mechanical device. The repair and servicing may be carried out only by an authorised customer service or manufacturer. If the device does not shine after the turning on of the device or flashes and the picture is absent or flashes in the eyepiece, the batteries can be used or be defective the contacts in the battery compartment. Change the batteries and check the contact on the battery compartment cover and the contact in the battery compartment. They should freely be from corrosion and any contamination. If you exchange the batteries and clean the controls, this does not help, and if there are other disturbances in the Monokular, do not try to disassemble it and to repair. This can lead to even more damage and loss of the guarantee. Contact the shop assistant or the manufacturer. 9. Rules for storage and transportation The device should be kept in a dry, heated and ventilated place at a place inaccessible for children with a relative humidity from up to 80% at a temperature of 5 C to 30 C. In the space there should be no present in the air of steams, acids, lyes and other aggressive pollutions Also with brief storage the batteries from the device take By the preparation of the instrument for the long time storage follower is necessary: 1.3. You smear the thread of the battery compartment lid, the internal contact of the battery compartment 1.4. Dry the device The transportation of the device is possible by the transport of all kinds according to the transport regulations which act in this transport kind

LN-TCL1 & LN-TCL1-LRF

LN-TCL1 & LN-TCL1-LRF THERMAL IMAGING CLIP- ON MONOCULAR WITH OPTIONAL BUILT-IN LASER RANGEFINDER INSTRUCTION MANUAL IMPORTANT: Please read this manual in its entirety prior to using this device! 1 INTRODUCTION