xe910 Updated Form Factor Pin Out

Transcription

1 xe910 Updated Form Factor Pin Out Rev [ ]

2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTICE While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. Copyrights This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product. Computer Software Copyrights The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product NT11427A REV PAGE 2 OF

3 Usage and Disclosure Restrictions I. LICENSE AGREEMENTS The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. II. COPYRIGHTED MATERIALS Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit III. HIGH RISK MATERIALS Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. IV. TRADEMARKS TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners. V. THIRD PARTY RIGHTS The software may include Third Party Right software. In this case you agree to comply with all terms and conditions imposed on you in respect of such separate software. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third Party Right software. TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY OTHER CODE ), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES NT11427A REV PAGE 3 OF

4 APPLICABILITY TABLE PRODUCTS LE910CX SERIES UE910 SERIES HE910 SERIES CE910-DUAL CE910-SC DE910-DUAL DE910-SC LE910 SERIES LE920 AUTO SERIES LE910 V2 SERIES LE910 CAT.1 SERIES GE910-QUAD GE910-GNSS GE910-QUAD AUTO GE910-QUAD V3 GL865-DUAL 80502NT11427A REV PAGE 4 OF

5 Contents I. LICENSE AGREEMENTS... 3 II. COPYRIGHTED MATERIALS... 3 III. HIGH RISK MATERIALS... 3 IV. TRADEMARKS... 3 V. THIRD PARTY RIGHTS INTRODUCTION... 6 Contact Information, Support... 6 Text Conventions... 7 Related Documents SAFETY RECOMMENDATIONS... 9 READ CAREFULLY ACRONYMS SCOPE AND OVERVIEW PIN DESCRIPTION PIN MAP LAYOUT DIMENSION CURRENT XE910 VS UPDATED XE910 LAYOUT COMPARISON (TOP VIEW) DOCUMENT HISTORY NT11427A REV PAGE 5 OF

6 1. INTRODUCTION The information presented in this document is believed to be accurate and reliable. However, no responsibility is assumed by Telit Communications S.p.A. for its use, nor any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent rights of Telit Communications S.p.A. other than for circuitry embodied in Telit products. This document is subject to change without notice. Contact Information, Support For general contact, technical support services, technical questions and report documentation errors contact Telit Technical Support at: Alternatively, use: For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit: Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements. Telit appreciates feedback from the users of our information NT11427A REV PAGE 6 OF

7 Text Conventions Danger This information MUST be followed or catastrophic equipment failure or bodily injury may occur. Caution or Warning Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction. Tip or Information Provides advice and suggestions that may be useful when integrating the module. All dates are in ISO 8601 format, i.e. YYYY-MM-DD NT11427A REV PAGE 7 OF

8 Related Documents 1VV _LE910Cx_Hardware_User_Guide_r0_ NT11427A REV PAGE 8 OF

9 2. SAFETY RECOMMENDATIONS READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas: Where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc. Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is the responsibility of the user to enforce the country regulation and the specific environment regulation. Do not disassemble the product; any mark of tampering will compromise the warranty validity. We recommend following the instructions of the hardware user guides for correct wiring of the product. The product has to be supplied with a stabilized voltage source and the wiring has to be conformed to the security and fire prevention regulations. The product has to be handled with care, avoiding any contact with the pins because electrostatic discharges may damage the product itself. Same cautions have to be taken for the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM when the product is in power saving mode. The system integrator is responsible for the functioning of the final product; therefore, care has to be taken to the external components of the module, as well as any project or installation issue, because the risk of disturbing the GSM network or external devices or having impact on the security. Should there be any doubt, please refer to the technical documentation and the regulations in force. Every module has to be equipped with a proper antenna with specific characteristics. The antenna has to be installed with care in order to avoid any interference with other electronic devices and has to guarantee a minimum distance from the body (20 cm). In case this requirement cannot be satisfied, the system integrator has to assess the final product against the SAR regulation. The European Community provides some Directives for the electronic equipment introduced on the market. All of the relevant information is available on the European Community website: The text of the Directive 99/05 regarding telecommunication equipment is available, while the applicable Directives (Low Voltage and EMC) are available at: NT11427A REV PAGE 9 OF

10 3. ACRONYMS TTSC USB HS DTE UMTS WCDMA HSDPA HSUPA UART HSIC SIM SPI ADC DAC I/O GPIO CMOS MOSI MISO CLK MRDY SRDY CS RTC PCB ESR VSWR VNA TELIT TECHNICAL SUPPORT CENTRE UNIVERSAL SERIAL BUS HIGH SPEED DATA TERMINAL EQUIPMENT UNIVERSAL MOBILE TELECOMMUNICATION SYSTEM WIDEBAND CODE DIVISION MULTIPLE ACCESS HIGH SPEED DOWNLINK PACKET ACCESS HIGH SPEED UPLINK PACKET ACCESS UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER HIGH SPEED INTER CHIP SUBSCRIBER IDENTIFICATION MODULE SERIAL PERIPHERAL INTERFACE ANALOG DIGITAL CONVERTER DIGITAL ANALOG CONVERTER INPUT OUTPUT GENERAL PURPOSE INPUT OUTPUT COMPLEMENTARY METAL OXIDE SEMICONDUCTOR MASTER OUTPUT SLAVE INPUT MASTER INPUT SLAVE OUTPUT CLOCK MASTER READY SLAVE READY CHIP SELECT REAL TIME CLOCK PRINTED CIRCUIT BOARD EQUIVALENT SERIES RESISTANCE VOLTAGE STANDING WAVE RADIO VECTOR NETWORK ANALYZER 80502NT11427A REV PAGE 10 OF

11 4. SCOPE AND OVERVIEW The aim of this document is the description of new xe910 pin assignments and the comparison with the conventional xe910 family product. This document describes the form-fit of the family. Each product will have its own datasheet in which the supported functionality specific to each module will be noted. Not all functions are supported in the all products. The product specific datasheet should always be considered as the most accurate and up to date specification 80502NT11427A REV PAGE 11 OF

12 5. PIN DESCRIPTION The table below provides a comparison between the current ball map and the updated ball map xe910 FF Pin OUT (New) xe910 FF Pin OUT (Current) PAD Signal I/O Description PAD Signal I/O Description USB 2.0 Interface USB 2.0 Interface A13 USB_VBUS AI Power for the internal USB transceiver. A13 USB_VBUS AI Power for the internal USB transceiver. A14 USB_ID AI USB_ID, USB OTG use A14 USB_ID AI USB_ID, USB OTG use B15 USB_D+ I/O USB differential Data (+) B15 USB_D+ I/O USB differential Data (+) C15 USB_D- I/O USB differential Data (-) C15 USB_D- I/O USB differential Data (-) USB 3 Interface D8 USB_SS_TX_P O USB 3.0/3.1 Super Speed TX Data (+) D9 USB_SS_TX_N O USB 3.0/3.1 Super Speed TX Data (-) D10 USB_SS_RX_P I USB 3.0/3.1 Super Speed RX Data (+) D11 USB_SS_RX_N I USB 3.0/3.1 Super Speed RX Data (-) Asynchronous UART - Prog. / Data + HW Flow Control Asynchronous UART - Prog. / Data + HW Flow Control N15 C103/TXD I M15 C104/RXD O L14 C105/RTS I P15 C106/CTS O P14 C107/DSR O Serial data input (TXD) from DTE Serial data output (RXD) to DTE Input for Request to Send (RTS) from DTE Output for Clear to Send (CTS) to DTE Output for Data Set Ready (DSR) to DTE N15 C103/TXD I Serial data input (TXD) from DTE M15 C104/RXD O Serial data output (RXD) to DTE L14 C105/RTS I Input for Request to Send (RTS) from DTE P15 C106/CTS O Output for Clear to Send (CTS) to DTE P14 C107/DSR O Output for Data Set Ready (DSR) to DTE M14 C108/DTR I Input for Data Terminal Ready (DTR) from DTE M14 C108/DTR I Input for Data Terminal Ready (DTR) from DTE N14 C109/DCD O Output for Data Carrier Detect (DCD) to DTE N14 C109/DCD O Output for Data Carrier Detect (DCD) to DTE R14 C125/RING O Output for Ring Indication (RI) to DTE R14 C125/RING O Output for Ring Indication (RI) to DTE 80502NT11427A REV PAGE 12 OF

13 Asynchronous Auxiliary UART (Dedicated Location) Asynchronous Auxiliary UART (Dedicated Location) K4 TX_AUX O Auxiliary UART (Debug) L4 RX_AUX I Auxiliary UART (Debug) SIM card interface 1 SIM card interface 1 A3 SIMVCC1 - External SIM signal 1 Power supply for the SIM A3 SIMVCC1 - External SIM signal 1 Power supply for the SIM A6 SIMCLK1 O External SIM signal 1 Clock A6 SIMCLK1 O External SIM signal 1 Clock A4 SIMIN1 I External SIM signal 1 Card detect (Active low) A4 SIMIN1 I External SIM signal 1 Card detect (Active low) A5 SIMIO1 I/O A7 SIMRST1 O External SIM signal 1 Data I/O External SIM signal 1 Reset A5 SIMIO1 I/O External SIM signal 1 Data I/O A7 SIMRST1 O External SIM signal 1 Reset Analog Audio Analog Audio B2 EAR1_MT+ AO B3 EAR1_MT- AO B4 MIC1_MT+ AI B5 MIC1_MT- AI Handset ear signal output, phase + Handset ear signal output, phase - Handset microphone signal input; phase+ Handset microphone signal input; phase- B2 EAR1_MT+ AO Handset ear signal output, phase + B3 EAR1_MT- AO Handset ear signal output, phase - B4 MIC1_MT+ AI Handset microphone signal input; phase+ B5 MIC1_MT- AI Handset microphone signal input; phase- Digital Voice Interface (DVI) Digital Voice Interface (DVI) B6 DVI_RX I PCM data input B6 DVI_RX I PCM data input B8 DVI_CLK I/O PCM clock B8 DVI_CLK I/O PCM clock B7 DVI_TX O PCM data output B7 DVI_TX O PCM data output B9 DVI_WAO I/O PCM sync B9 DVI_WAO I/O PCM sync B12 REF_CLK O Codec Reference Clock B12 REF_CLK O Codec Reference Clock 80502NT11427A REV PAGE 13 OF

14 SPI (Master/Slave) SPI (Master/Slave) D15 SPI_MOSI/ AUX_TX_ TGPIO11 I/O SPI Master output Slave Input / AUX UART TX D15 SPI_MOSI/ AUX_TX_ TGPIO11 I/O SPI Master output Slave Input / AUX UART TX E15 SPI_MISO/AUX_RX_TG PIO12 I/O SPI Master input Slave output / / AUX UART TX E15 SPI_MISO/AUX_RX _TGPIO12 I/O SPI Master input Slave output / / AUX UART TX H14 SPI_CS_TGPIO13 I/O SPI chip select H14 SPI_CS_TGPIO13 I/O SPI chip select F15 SPI_CLK_TGPIO14 I/O SPI clock F15 SPI_CLK_TGPIO14 I/O SPI clock H15 SPI_MRDY I/O SPI Master Ready (Not supported by Qualcomm) H15 SPI_MRDY I/O SPI Master Ready (Not supported by Qualcomm) J15 SPI_SRDY I/O SPI Slave Ready (Not supported by Qualcomm) J15 SPI_SRDY I/O SPI Slave Ready (Not supported by Qualcomm) I2C Interface I2C Interface B11 I2C_SCL_TGPIO15 I/O I2C clock B11 I2C_SCL_TGPIO15 I/O I2C clock B10 I2C_SDA_TGPIO16 I/O I2C Data B10 I2C_SDA_TGPIO16 I/O I2C Data DIGITAL IO DIGITAL IO C8 TGPIO_01 I/O GPIO_01 C8 TGPIO_01 I/O GPIO_01 C9 TGPIO_02 I/O GPIO_02 C9 TGPIO_02 I/O GPIO_02 C10 TGPIO_03 I/O GPIO_03 C10 TGPIO_03 I/O GPIO_03 C11 TGPIO_04 I/O GPIO_04 C11 TGPIO_04 I/O GPIO_04 B14 TGPIO_05 I/O GPIO_05 B14 TGPIO_05 I/O GPIO_05 C12 TGPIO_06 I/O GPIO_06 C12 TGPIO_06 I/O GPIO_06 C13 TGPIO_07 I/O GPIO_07 C13 TGPIO_07 I/O GPIO_07 K15 TGPIO_08 I/O GPIO_08 K15 TGPIO_08 I/O GPIO_08 L15 TGPIO_09 I/O GPIO_09 L15 TGPIO_09 I/O GPIO_09 G15 TGPIO_10 I/O GPIO_10 / MMC_PWR_EN G15 TGPIO_10 I/O GPIO_10 / MMC_PWR_EN M7 TGPIO_20 I/O GPIO_20 / FASTBOOT 80502NT11427A REV PAGE 14 OF

15 WIFI SDIO Interface WIFI SDIO Interface L12 WIFI_SDRST_TGPIO17 I/O Wi-Fi reset L12 WIFI_SDRST_TGPIO 17 I/O Wi-Fi reset L13 WIFI_SDCLK_TGPIO18 I/O Wi-Fi CLK L13 WIFI_SDCLK_TGPIO 18 I/O Wi-Fi CLK N13 WIFI_SDCMD_TGPIO19 I/O Wi-Fi CMD N13 WIFI_SDCMD_TGPI O19 I/O Wi-Fi CMD J13 WIFI_SD0_TGPIO20 I/O Wi-Fi SD0 J13 WIFI_SD0_TGPIO20 I/O Wi-Fi SD0 M13 WIFI_SD1_TGPIO21 I/O Wi-Fi SD1 M13 WIFI_SD1_TGPIO21 I/O Wi-Fi SD1 K13 WIFI_SD2_TGPIO22 I/O Wi-Fi SD2 K13 WIFI_SD2_TGPIO22 I/O Wi-Fi SD2 H13 WIFI_SD3_TGPIO23 I/O Wi-Fi SD3 H13 WIFI_SD3_TGPIO23 I/O Wi-Fi SD3 M11 WLAN_SLEEP_CLK O WiFi Sleep Clock M11 WLAN_SLEEP_CLK O WiFi Sleep Clock M8 WCI_TXD_TGPIO24 DO Wireless coexistence interface TXD (From LTE modem) M9 WCI_RXD_TGPIO25 DI Wireless coexistence interface RXD (To LTE modem) SD/MMC Card Interface SD/MMC Card Interface F13 VCC_MMC - G13 MMC_CD I Power supply out for MMC card MMC card detect(active low) F13 VCC_MMC - Power supply out for MMC card G13 MMC_CD I MMC card detect(active low) G12 MMC_DAT0 I/O MMC card data 0 H12 MMC_DAT1 I/O MMC card data 1 J12 MMC_DAT2 I/O MMC card data 2 K12 MMC_DAT3 O MMC card data3 E12 MMC_CLK O MMC card clock F12 MMC_CMD I/O MMC card command 80502NT11427A REV PAGE 15 OF

16 RF SECTION RF SECTION F1 ANT_DIV I RF antenna diversity1 F1 ANT_DIV I RF antenna diversity1 K1 ANT I/O Main Cellular RF antenna K1 ANT I/O Main Cellular RF antenna R4 ANT_2 I/O Antenna for future use GPS SECTION GPS SECTION R9 ANT_GPS I GPS antenna R9 ANT_GPS I GPS antenna R7 GPS_LNA_EN O Enable the external regulator for GPS LNA R7 GPS_LNA_EN O Enable the external regulator for GPS LNA P7 GPS_PPS O GPS_PPS P7 GPS_PPS O GPS_PPS N9 GPS_SYNC O GPS_SYNC N9 GPS_SYNC O GPS_SYNC Miscellaneous Functions Miscellaneous Functions D12 HW_KEY O Reference 1 kω resistor for production D12 HW_KEY O Reference 1 kω resistor for production C14 VRTC AI VRTC Backup capacitor C14 VRTC AI VRTC Backup capacitor P11 RESET_BB I Reset input to baseband controller P11 RESET_BB I Reset input to baseband controller M5 S/W_RDY O Ready for AT command input R13 SNDN I Emergency power off R13 SNDN I Emergency power off R12 ON_OFF* I Power ON/OFF R12 ON_OFF* I Power ON/OFF J4 STAT_LED O Status indicator LED E13 VIO_1.8_REF AO 1.8V IO domain Reference E13 VIO_1.8_REF AO 1.8V IO domain Reference R11 VAUX/PWRMON O Auxiliary Power output for external accessories/power on monitor R11 VAUX/PWRMON O Auxiliary Power output for external accessories/power on monitor M10 RFCLK2_QCA O Low noise RF clock output 2 SIM 2 Interface SIM 2 Interface D2 SIMVCC2 - External SIM signal 2 Power supply for the SIM D2 SIMVCC2 - External SIM signal 2 Power supply for the SIM C1 SIMCLK2 O External SIM signal 2 Clock C1 SIMCLK2 O External SIM signal 2 Clock G4 SIMIN2 I External SIM signal 2 Card detect (Active low) C2 SIMIO2 I/O External SIM signal 2 Data I/O C2 SIMIO2 I/O External SIM signal 2 Data I/O 80502NT11427A REV PAGE 16 OF

17 D1 SIMRST2 O ADC Ports External SIM signal 2 Reset D1 SIMRST2 O External SIM signal 2 Reset ADC Ports B1 ADC_IN1 AI Analog to Digital converter 1 B1 ADC_IN1 AI Analog to Digital converter 1 H4 ADC_IN2 AI Analog to Digital converter 2 D7 ADC_IN3 AI Analog to Digital converter 3 HSIC interface HSIC interface A12 HSIC_DATA I/O A11 HSIC_STB I/O High-speed inter-chip interface - data High-speed inter-chip interface - strobe A12 HSIC_DATA I/O High-speed inter-chip interface - data A11 HSIC_STB I/O High-speed inter-chip interface - strobe E4 SGMII_RX_P AI SGMII Receive Positive F4 SGMII_RX_M AI SGMII Receive Negative D5 SGMII_TX_P AO SGMII Transmit Positive D6 SGMII_TX_M AO SGMII Transmit Negative JTAG JTAG C6 JTAG_TDI I JTAG C6 JTAG_TDI I JTAG C3 JTAG_RESET I JTAG C3 JTAG_RESET I JTAG D3 JTAG_TCK I JTAG D3 JTAG_TCK I JTAG C4 JTAG_TRST* I JTAG C4 JTAG_TRST* I JTAG E3 JTAG_TDO O JTAG E3 JTAG_TDO O JTAG C5 JTAG_TMS I JTAG C5 JTAG_TMS I JTAG G3 JTAG_PS_HOLD I Power supply hold signal G3 JTAG_PS_HOLD I Power supply hold signal Power Supply Power Supply M1 VBATT - M2 VBATT - Main power supply for Baseband Main power supply for Baseband M1 VBATT - Main power supply for Baseband M2 VBATT - Main power supply for Baseband N1 VBATT_PA - Main power supply for PA N1 VBATT_PA - Main power supply for PA N2 VBATT_PA - Main power supply for PA N2 VBATT_PA - Main power supply for PA P1 VBATT_PA - Main power supply for PA P1 VBATT_PA - Main power supply for PA P2 VBATT_PA - Main power supply for PA P2 VBATT_PA - Main power supply for PA 80502NT11427A REV PAGE 17 OF

18 GND GND A2 GND - A2 GND - B13 GND - B13 GND - D4 GND - D4 GND - E1 GND - E1 GND - E2 GND - E2 GND - E14 GND - E14 GND - F2 GND - F2 GND - G1 GND - G1 GND - G2 GND - G2 GND - H1 GND - H1 GND - H2 GND - H2 GND - J1 GND - J1 GND - J2 GND - J2 GND - K2 GND - K2 GND - L1 GND - L1 GND - L2 GND - L2 GND - M3 GND - M3 GND - M4 GND - M4 GND - M12 GND - M12 GND - N3 GND - N3 GND - N4 GND - N4 GND - N5 GND - N5 GND - N6 GND - N6 GND - P3 GND - P3 GND - P4 GND - P4 GND - P5 GND - P5 GND - P6 GND - P6 GND - P8 GND - P8 GND - P9 GND - P9 GND NT11427A REV PAGE 18 OF

19 P10 GND - P10 GND - P13 GND - P13 GND - R2 GND - R2 GND - R3 GND - R3 GND - R4 ANT_2 I/O ANT_2 R4 GND - R5 GND - R5 GND - R6 GND - R6 GND - R8 GND - R8 GND - R10 GND - R10 GND - GND middle pads GND middle pads G7 GND - - G8 GND - G9 GND - H7 GND - H8 GND - H9 GND - J7 GND - J8 GND - J9 GND - RFU RFU A8 RFU - Was USB SIM A8 RFU - Was USB SIM A9 RFU - Was USB SIM A9 RFU - Was USB SIM A10 RFU - Was GNSS_3V3 A10 RFU - Was GNSS_3V3 C7 RFU - Was JTAG TRIG OUT C7 RFU - Was JTAG TRIG OUT D13 RFU - Was VDD_MIPI D13 RFU - Was VDD_MIPI D14 RFU - Was VIO_1V2 D14 RFU - Was VIO_1V2 F3 RFU - Was JTAG TRIG IN F3 RFU - Was JTAG TRIG IN F14 RFU - Was VPP F14 RFU - Was VPP G14 RFU - Was GNSS_EN G14 RFU - Was GNSS_EN H3 RFU - Was GNSS_I2C_SDA H3 RFU - Was GNSS_I2C_SDA 80502NT11427A REV PAGE 19 OF

20 J3 RFU - Was GNSS_I2C_SCL J3 RFU - Was GNSS_I2C_SCL J14 RFU - Was GNSS_NMEA_TX J14 RFU - Was GNSS_NMEA_TX K3 RFU - Was GNSS_CAN0TX K3 RFU - Was GNSS_CAN0TX K14 RFU - Was GNSS_NMEA_RX K14 RFU - Was GNSS_NMEA_RX L3 RFU - Was GNSS_CAN0RX L3 RFU - Was GNSS_CAN0RX N7 RFU - Was GPS_CLK N7 RFU - Was GPS_CLK N8 RFU - Was GPS_RFPAON N8 RFU - Was GPS_RFPAON N10 RFU - Was GNSS_INT N10 RFU - Was GNSS_INT N11 RFU - Was GPS_32KHZ N11 RFU - Was GPS_32KHZ N12 RFU - Was EXC_IND N12 RFU - Was EXC_IND P12 RFU - Was WIFI_CMD on some designs P12 RFU - Was WIFI_CMD on some designs 80502NT11427A REV PAGE 20 OF

21 6. PIN MAP Figure 1 xe910 Form Factor [TOP VIEW] 80502NT11427A REV PAGE 21 OF

22 Figure 2 Updated Form Factor [TOP VIEW] A B C D E F G H J K L M N P R 1 ADC_IN1 SIMCLK2 SIMRST2 GND ANT_DIV GND GND GND ANT_MAIN GND VBATT VBATT_PA VBATT_PA 2 GND EAR+ SIMIO2 SIMVCC2 GND GND GND GND GND GND GND VBATT VBATT_PA VBATT_PA GND 3 SIMVCC EAR- JTAG_RESET* JTAG_TCK JTAG_TDO JTAG_TRIGIN JTAG_PS_HOLD GNSS_I2C_SDA GNSS_I2C_SCL GNSS_CAN0TX GNSS_CAN0RX GND GND GND GND 4 SIMIN MIC+ JTAG_TRST* GND SGMII_RX_P SGMII_RX_M SIMIN2 ADC_IN2 STAT_LED TX_AUX RX_AUX GND GND GND ANT_2 5 SIMIO MIC- JTAG_TMS SGMII_TX_P S/W_RDY GND GND GND 6 SIMCLK DVI_RX JTAG_TDI SGMII_TX_M RES GND GND GND 7 SIMRST DVI_TX JTAG_TRIGOUT ADC_IN3 GND GND GND GPIO_20 GPS_CLK GNSS_PPS GPS_LNA_EN 8 USB_SIM_D DVI_CLK GPIO_01 USB_SS_TX_M GND GND GND WCI_TXD_TGPIO24 GPS_RFPAON GND GND 9 USB_SIM_D+ DVI_WA0 GPIO_02 USB_SS_TX_P GND GND GND WCI_RXD_TGPIO25 GPS_SYNC GND ANT_GPS 10 GNSS_3V3 I2C_SDA GPIO_03 USB_SS_RX_P RFCLK2_QCA GPS_INT GND GND 11 HSIC_STB I2C_SCL GPIO_04 USB_SS_RX_M WLAN_SLEEP_CLK GPS_32KHZ RESET_BB* VAUX/PWRMON 12 HSIC_DATA REF_CLK GPIO_06 HW_KEY MMC_DAT0 MMC_CLK MMC_DAT1 MMC_DAT3 MMC_CMD MMC_DAT2 WIFI_SDRST GND EXC_IND ON_OFF ON_OFF* 13 VUSB GND GPIO_07 VDD_MIPI VSD2_1V8 VMMC MMC_CD WIFI_SD3 WIFI_SD0 WIFI_SD2 WIFI_SDCLK WIFI_SD1 WIFI_SDCMD GND HW_SHUTDOWN* 14 USB_ID GPIO_05 VRTC VIO_1V2 GND VPP GNSS_EN SPI_CS GNSS_NMEA_TX GNSS_NMEA_RX C105/RTS C108/DTR C109/DCD C107/DSR C125/RING 15 USB_D+ USB_D- SPI_MOSI / TX_AUX SPI_MISO/RX_AUX SPI_CLK GPIO_10 SPI_MRDY SPI_SRDY GPIO_08 GPIO_09 C104/RXD C103/TXD C106/CTS 80502NT11427A REV PAGE 22 OF

23 7. LAYOUT DIMENSION Figure 3 xe910 Current Form Factor [TOP VIEW] 80502NT11427A REV PAGE 23 OF

24 Figure 4 Updated Form Factor [TOP VIEW] 80502NT11427A REV PAGE 24 OF

25 8. CURRENT XE910 VS UPDATED XE910 LAYOUT COMPARISON (TOP VIEW) 80502NT11427A REV PAGE 25 OF

26 9. DOCUMENT HISTORY Revision Date Changes First issue Updated AUX UART location Updated few minor typos 80502NT11427A REV PAGE 26 OF

27 [ ]