Obtaining the New and Enhanced Device Drivers... 2 Which Jar File is a Device Using?... 2 New Support for Cisco Routers... 4
|
|
|
- Shanna Tate
- 5 years ago
- Views:
Transcription
1 Addendum: Additional VNE Driver Support for Cisco Prime Network 5.1 Date: November 30, 2018 This is a companion document to Cisco Prime Network 5.1 Supported VNEs. It contains the following: Information about new or enhanced Virtual Network Elements (VNE) drivers, new modules, new technologies and new software versions supported after Prime Network 5.1 release. Device support information for Change and Configuration Management. Device support information for command scripts (scripts launched by right-clicking an NE in Prime Network Vision and choosing Commands). Contents Obtaining the New and Enhanced Device Drivers... 2 Which Jar File is a Device Using?... 2 New Support for Cisco Routers... 4 Cisco ASR 920 Routers Additional Support... 4 Cisco ASR 5000 Series Routers Additional Support... 4 Cisco Network Convergence System 540 Series Routers (NCS 540) Additional Support... 5 Cisco Industrial Ethernet 2K Additional Support... 6 Cisco ISR 842 Routers Additional Support... 7 New Support for Cisco Switches... 7 Cisco Catalyst 2960 Series Switches Additional Support... 7 Cisco Nexus 7000 Series Switches Additional Support... 8 Cisco Nexus 9000 Series Switches Additional Support... 8 New Support for VMware Devices... 8 VMware VirtualCenter Server Additional Support... 8 New Support for Data Center... 8 Cisco UCS Additional Support... 8 Support for Change and Configuration Management... 9 Cisco Network Convergence System 540 Series Routers (NCS 540)
2 Obtaining the New and Enhanced Device Drivers New and enhanced VNE support for multiple device families is provided through Prime Network Device Packages (DPs) and Point Patches, as they become available. To obtain this additional support, do the following: For Device Packages (DPs), log into Cisco.com and go to the Cisco Prime Network Software Download site. For Patches, log into Cisco.com and go to the Cisco Prime Network Software Download site. Once you download the new support, you can install on Cisco Prime Network 5.1. DP contents are described in this document (and in the Readme that accompanies the download). Point Patch contents are described in the Release Note or Readme available on the download site. Which Jar File is a Device Using? To identify the jar file that is being used by any devices that are managed by Prime Network, open the Administration client and check the properties of the VNE. In the General tab, the driver file name is displayed. The following example shows a Nexus 9000 device that is using the driver file Cisco-Nexus90xx-v jar, which was provided in the release of Prime Network 5.1(DP0). 2
3 With this information, you can check if a newer version is available and what new support it provides (see the New Support sections in this document). 3
4 New Support for Cisco Routers Cisco ASR 920 Routers Additional Support Cisco ASR 920 Supported Software Versions Software Version IOS-XE SP / 15.6(2)SP4 DP 1809 Cisco ASR 5000 Series Routers Additional Support Cisco ASR 5000 Supported Software Versions Software Version StarOS StarOS 21.8 StarOS Cisco ASR 5000 Supported Events and Miscellaneous Support Support for: staruidhurlhostdatabaseupgradefailurestatus staruidhurlhostdatabaseupgradesuccessstatus starsmartlicensefeatureooc starsmartlicensefeatureoocclear stariftaskbootconfigapplied CISCO-SYSTEM-EXT-MIB CseHaRestartNotify CseShutDownNotify CseFailSwCoreNotify CseFailSwCoreNotifyExtended csenormalmodechangenotify csemaintmodechangenotify CISCO-ENHANCED-IPSEC-FLOW-MIB CiscoEnhIpsecFlowTunnelStart CiscoEnhIpsecFlowTunnelStop ciscoenhipsecflowsysfailure ciscoenhipsecflowcertexpiry 4
5 Support for: ciscoenhipsecflowcertrenewal ciscoenhipsecflowsetupfail ciscoenhipsecflowbadsa CISCO-IF-EXTENSION-MIB CiePortLinkDown CiePortLinkUp ciedelayedlinkupdownnotify Cisco Network Convergence System 540 Series Routers (NCS 540) Additional Support Cisco Network Convergence System 540 Series Routers (NCS 540) Supported software versions Software Version IOS-XR XR DP 1809 IOS-XR XR DP 1809 Cisco Network Convergence System 540 Series Routers (NCS 540) Supported Network Elements NE Type Product Name SysOID Cisco NCS 540 (N540-X-24Z8Q2C-M) Cisco NCS DP 1809 Cisco Network Convergence System 540 Series Routers (NCS 540) Supported Modules Module Name Module Description Added in N540-FAN N540-FAN DP 1809 QSFP-40G-SR4-S E QSFP-40G-SR4-S E DP
6 Cisco Network Convergence System 540 Series Routers (NCS 540) Supported Technologies Support for AAA Access List CDP LAG LLDP IS-IS Label Switching Modular OS MPBGP MPLS-TE MPLS-TP OSPF and OSPFv3 QOS IPv4 and IPv6 VRF Local Switching BFD Pseudowire VSI Bridge PIM IGMP DP 1809 Cisco Network Convergence System 540 Series Routers (NCS 540) Supported Syslogs Syslog %L2-OPTICS-2-TRANSCEIVER_REMOVED: Optics module FortyGigE0/0/1/0 type QSFP+ 40G SR4 removed DP 1809 %L2-OPTICS-6-TRANSCEIVER_INSERTED: Optics module FortyGigE0/0/1/0 type QSFP+ 40G SR4 inserted Cisco Industrial Ethernet 2K Additional Support Cisco Industrial Ethernet 2K Supported Modules Module Name Module Description Added in IE TC-G-L IE TC-G-L IE PTC-G-L IE PTC-G-L 6
7 Cisco ISR 842 Routers Additional Support Cisco ISR 842 Supported Software Versions Software Version IOS M10(MD) Cisco ISR 842 Supported Network Elements NE Type Product Name SysOID CISCO892F-K9 CISCO892F-K C892FSP-K9 C892FSP-K Cisco ISR 842 Supported Modules Module Name Module Description Added in C892FSP Mother board C892FSP Mother board New Support for Cisco Switches Cisco Catalyst 2960 Series Switches Additional Support Cisco Cat 2960 Supported Software Versions Software Version 15.2(4)E2 DP 1809 Cisco Cat 2960 Supported Modules Module Name Module Description WS-C2960C-8TC-L WS-C2960C-8TC-L DP 1809 WS-C2960X-24TS-L WS-C2960X-24TS-L DP 1809 WS-C2960X-24TD-L WS-C2960X-24TD-L DP 1809 WS-C2960C-12PC-L WS-C2960C-12PC-L DP
8 Cisco Nexus 7000 Series Switches Additional Support Cisco Nexus 7000 Supported Software Versions Software Version NX-OS 6.2(20) DP 1809 Cisco Nexus 7000 Supported Network Elements NE Type Product Name SysOID Nexus 7004 Nexus DP 1809 Cisco Nexus 9000 Series Switches Additional Support Cisco Nexus 9000 Supported Software Versions Software Version 7.0(3)I7(3) DP (3)I4(8a) DP 1809 New Support for VMware Devices VMware VirtualCenter Server Additional Support VMware VirtualCenter Server Supported Software Versions Software Version New Support for Data Center Cisco UCS Additional Support Cisco UCS Supported Software Versions Software Version Frimware version:2.2(8l) ; NX-OS version: 5.2(3)N2(2.28l) Frimware version:3.1(3k); NX-OS version: 5.0(3)N2(3.13h) 8
9 Software Version Frimware version:3.2(3h); NX-OS version: 5.0(3)N2(3.23e) Frimware version:4.0(1b); NX-OS version: 5.0(3)N2(4.01b) Support for Change and Configuration Management Change and Configuration Management is enhanced through device packs and point patches to support the following: Cisco Network Convergence System 540 Series Routers (NCS 540) Device Series Software Version/Feature Provided/ NCS 540 Cisco IOS-XR 6.3.2/6.3.3 DP 1809 Features Support Level of Support/Limitations Backup Running-config Restore Running-config supports both overwrite and merge mode Edit and restore / Edited Config Archive restore: Configuration deploy mode will be Merge by default. Change log Configuratio n Export Distribution To perform image operations application changes are required. Install add Application changes will be part of Point Patch (PP) release. For more details, refer the bug CSCvm13586 Activation Deactivate Remove Rollback Commit Image Baseline Synchronize No ISSU No Support Supported Protocol: TFTP,SFTP 9
Obtaining the New and Enhanced Device Drivers... 3 Which Jar File is a Device Using?... 3 New Support for Cisco Routers... 5
Addendum: Additional VNE Driver Support for Cisco Prime Network 5.0 Date: Date: November 30, 2018 This is a companion document to Cisco Prime Network 5.0 Supported VNEs. It contains the following: Information
Device support information for Change and Configuration Management.
Addendum: Additional VNE Driver Support for Cisco Prime Network 4.3.1 Date: Jan 24, 2017 This is a companion document to Cisco Prime Network 4.3.1 Supported VNEs. It contains: Device support information
Cisco Prime Network 3.8 VNE Device Package Installation Guide
Page 1 of 12 Cisco Prime Network 3.8 VNE Device Package Installation Guide Date: March 28, 2012 OL-25214-01 Contents 1 Overview: Installing and Uninstalling Device Packages... 2 2 Installation Prerequisites...
Readme for Device Pack 16 for Cisco Prime Infrastructure 3.1
Readme for Device Pack 16 for Cisco Prime Infrastructure 3.1 Revised: 10/10/2017 This Readme provides information on installing and upgrading, bug fixes, and additional documentation for Cisco Prime Infrastructure,
This chapter explains Simple Network Management Protocol (SNMP) as implemented by NCS 4000.
This chapter explains Simple Network Management Protocol (SNMP) as implemented by NCS 4000. Generic IETF Traps, page 1 SNMP Traps Supported in OTN, page 2 Generic IETF Traps OTN supports the generic IETF
Readme for Device Packs 5.0 for Cisco Prime Infrastructure 2.0
Readme for Device Packs 5.0 for Cisco Prime Infrastructure 2.0 Revised: 05/07/2014 This Readme provides information on installing and upgrading, bug fixes, and additional documentation for Cisco Prime
NETCONF Protocol. Restrictions for the NETCONF Protocol. Information About the NETCONF Protocol
Restrictions for the, on page 1 Information About the, on page 1 How to Configure the, on page 4 Verifying the Configuration, on page 7 Additional References for, on page 9 Feature Information for, on
Configuring Layer 3 Virtualization
CHAPTER 14 This chapter describes how to configure Layer 3 virtualization. This chapter includes the following sections: Layer 3 Virtualization, page 14-1 Licensing Requirements for VRFs, page 14-5 Prerequisites
Viewing Network Element Properties
CHAPTER 3 The following topics describe the user access roles required to use Cisco Prime Network Vision (Prime Network Vision) and how to view network element physical and logical properties in any mapped
Cisco Virtual Networking Solution for OpenStack
Data Sheet Cisco Virtual Networking Solution for OpenStack Product Overview Extend enterprise-class networking features to OpenStack cloud environments. A reliable virtual network infrastructure that provides
Supported Platforms for Cisco Path Trace, Release x. This document describes the supported platforms for the Cisco Path Trace, Release x.
Cisco Path Trace Application for APIC-EM Supported Platforms, Release 1.5.0.x First Published: 2017-06-23, Release 1.5.0.x This document describes the supported platforms for the Cisco Path Trace, Release
Introduction. Overview of Cisco NCS 4206 and NCS Cisco NCS 4206
The Cisco NCS 4206 and Cisco NCS 4216 are full-featured, modular aggregation platforms designed for the cost-effective delivery of converged mobile, residential, and business services. This document provides
Centralized Management and Service Assurance for the Whole Network
Data Sheet Cisco Prime Network Cisco Prime Network is a comprehensive and cost-effective device operation, administration, and network fault management solution for today s complex and fastevolving next-generation
OTV Loopback Join Interface
This chapter contains the following sections: Finding Feature Information, page 1 Information About, page 1 Licensing Information for, page 2 Guidelines and Limitationsfor, page 2 Prerequisites for, page
Flexible NetFlow IPFIX Export Format
The feature enables sending export packets using the IPFIX export protocol. The export of extracted fields from NBAR is only supported over IPFIX. Finding Feature Information, page 1 Information About,
Introduction. Overview of Cisco NCS 4206 and NCS Cisco NCS 4206
The Cisco NCS 4206 and Cisco NCS 4216 are full-featured, modular aggregation platforms designed for the cost-effective delivery of converged mobile, residential, and business services. This document provides
BFD on BDI Interfaces
The Cisco feature alleviates limitations on the maximum number of interfaces per system that switched virtual interfaces (SVI) impose. This document describes how to configure the Bidirectional Forwarding
Device Configuration Tasks for VNE Creation
APPENDIXA These topics describe the configuration tasks you must perform so that Prime Network can properly model and manage devices. Prime Network automatically performs a series of validation checks
Using the Management Ethernet Interface
The Cisco ASR 920 Series Router has one Gigabit Ethernet Management Ethernet interface on each Route Switch Processor. The purpose of this interface is to allow users to perform management tasks on the
To implement LPTS features mentioned in this document you must understand the following concepts:
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
Remote Access MPLS-VPNs
First Published: August 12, 2002 Last Updated: May 4, 2009 The feature allows the service provider to offer a scalable end-to-end Virtual Private Network (VPN) service to remote users. This feature integrates
Cisco IOS Software Release 15M&T Q&A
Cisco IOS Software Release 15M&T Q&A Last updated: July, 2010 General Q. What is Cisco IOS Software Release 15M&T? A. Developed for wide deployment in the world's most demanding Enterprise, Access, and
Introduction to Change and Configuration Management
CHAPTER 1 Introduction to Change and Configuration Management Cisco Prime Network Change and Configuration Management provides tools that allow you to manage the software and device configuration changes
C. The ESP that is installed in the Cisco ASR 1006 Router does not support SSO.
Volume: 197 Questions Question No : 1 SSO was configured on a Cisco ASR 1006 Router by using two RPs. When the main RP failed, a service disruption occurred. What are two reasons that the SSO did not work?
Cisco IOS XE Software for Cisco ASR 920 Series Aggregation Services Routers
Data Sheet Cisco IOS XE Software for Cisco ASR 920 Series Aggregation Services Routers Cisco IOS Software is continuously evolving to provide you with the features of higher quality. Cisco IOS Software
Cisco IOS Embedded Event Manager
Data Sheet Cisco IOS Embedded Event Manager Last updated: November 2011 Product Overview Cisco IOS Embedded Event Manager (EEM) is a unique subsystem within Cisco IOS Software. EEM is a powerful and flexible
Cisco Emergency Responder Version 11.5(4) Release Notes
Cisco Emergency Responder Version 11.5(4) Release Notes First Published: 2017-11-20 Last Modified: 2018-02-26 Introduction Cisco Emergency Responder Release 11.5(4) supports the following new feature:
This document is not restricted to specific software and hardware versions.
Contents Introduction Prerequisites Requirements Components Used Background Information Configure Network Diagram Configuration DN Bit Verify Troubleshoot Related Cisco Support Community Discussions Introduction
Autoroute Announce and Forwarding Adjacencies For OSPFv3
Autoroute Announce and Forwarding The Autoroute Announce and Forwarding Adjacencies for OSPFv3 feature advertises IPv6 routes over MPLS/TE IPv4 tunnels. This module describes how to configure the Autoroute
Autoroute Announce and Forwarding Adjacencies For OSPFv3
Autoroute Announce and Forwarding The Autoroute Announce and Forwarding Adjacencies for OSPFv3 feature advertises IPv6 routes over MPLS/TE IPv4 tunnels. This module describes how to configure the Autoroute
Cisco NCS 5011 Router Data Sheet
Data Sheet Cisco NCS 5011 Router Data Sheet Cisco helps service providers capture the digitization opportunity with cloud-scale software and hardware innovations that deliver unprecedented automation,
Vendor: Cisco. Exam Code: Exam Name: Designing Cisco Data Center Unified Fabric (DCUFD) Version: Demo
Vendor: Cisco Exam Code: 642-996 Exam Name: Designing Cisco Data Center Unified Fabric (DCUFD) Version: Demo DEMO QUESTION 1 Which three Cisco technologies or solutions are used during the virtualization
CCIE Routing & Switching
CCIE Routing & Switching Cisco Certified Internetwork Expert Routing and Switching (CCIE Routing and Switching) certifies the skills required of expert-level network engineers to plan, operate and troubleshoot
Verified Scalability Limits
This chapter describes the Cisco NX-OS configuration limits for the Cisco Nexus 316Q switch. Introduction, page 1 (Unidimensional), page 1 Introduction The values provided in this guide should not be interpreted
Configuring SDM Templates
Finding Feature Information, on page 1 Information About, on page 1 How to Configure SDM Templates, on page 3 Monitoring and Maintaining SDM Templates, on page 4 Configuration Examples for SDM Templates,
Working with Prime Network Vision Maps
CHAPTER 5 The topological map is the main tool used by Cisco Prime Network Vision (Prime Network Vision) to display the links and relationships between the network elements and aggregations. The following
VNE Administration: VNE Lifecycle and Creating VNEs
CHAPTER 19 VNE Administration: VNE Lifecycle and Creating VNEs These topics provide information about advanced VNE administration tasks: What Are VNE Communication and Investigation States?, page 19-1
Cisco Cloud Services Router 1000V with Cisco IOS XE Software Release 3.13
Q&A Cisco Cloud Services Router 1000V with Cisco IOS XE Software Release 3.13 Q. What is the Cisco Cloud Services Router 1000V? A. The Cisco Cloud Services Router 1000V (CSR 1000V) is a router in virtual
Overview Supported Network Elements in Prime Network Version 3.8.x and 3.9.x
CHAPTER 2 Overview Supported Network Elements in Prime Network.8.x and.9.x This chapter provides an overview of network elements (NEs) that are supported by Prime Network.8.x and.9.x: This chapter contains
Change and Configuration Management Administration
CHAPTER 7 Change and Configuration Management Administration These topics provide administrative information on Change and Configuration Management: Configuring Global Settings for Configuration Management,
Add and Organize Devices
This chapter contains the following topics: Add Devices to Prime Infrastructure, on page 1 Import Devices from Another Source, on page 7 Create Device Import CSV Files, on page 7 Add Devices Manually (New
BGP mvpn BGP safi IPv4
The BGP mvpn BGP safi 129 IPv4 feature provides the capability to support multicast routing in the service provider s core IPv4 network This feature is needed to support BGP-based MVPNs BGP MVPN provides
BGP Best External. Finding Feature Information
The feature provides the network with a backup external route to avoid loss of connectivity of the primary external route. The feature advertises the most preferred route among those received from external
Cisco Emergency Responder Version 12.0(1)SU(1) Release Notes
Cisco Emergency Responder Version 12.0(1)SU(1) Release Notes First Published: 2018-01-16 Last Modified: 2018-02-26 Introduction Cisco Emergency Responder release 12.0(1) SU1 supports the following new
Configuring SDM Templates
Information About, on page 1 How to Configure SDM Templates, on page 2 Monitoring and Maintaining SDM Templates, on page 3 Configuration Examples for SDM Templates, on page 4 Additional References for
Cisco Aggregation Services Router 9000 Series Essentials
Cisco Aggregation Services Router 9000 Series Essentials Duration: 5 Days Course Code: ASR9KE Version: 4.0 Overview: This instructor-led course introduces you to the features and functions of the Cisco
Configuring Virtual Private LAN Services
Virtual Private LAN Services (VPLS) enables enterprises to link together their Ethernet-based LANs from multiple sites via the infrastructure provided by their service provider. This module explains VPLS
Cisco Prime Network 4.3 Supported Technologies and Topologies
Cisco Prime Network 4.3 Supported Technologies and Topologies July, 2016 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000
Cisco Prime Network Client Overview
CHAPTER 1 Cisco Prime Network (Prime Network) provides a suite of GUI tools that offer an intuitive interface for managing the network and services, and for performing required system administration activities.
Cisco Integrated Services Virtual Router
Data Sheet Cisco Integrated Services Virtual Router The Cisco Integrated Services Virtual Router (ISRv) is a virtual form-factor Cisco IOS XE Software router that delivers comprehensive WAN gateway and
Cisco Lawful Intercept Security Best Practices
White Paper Cisco Lawful Intercept Security Best Practices Cisco Systems, Inc. 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 10 Contents Target Audience...
Cisco License Manager 3.1
Product Bulletin Cisco License Manager 3.1 Last Updated: May 2011 Cisco announces Cisco License Manager 3.1 for managing Cisco IOS Software activation and license management for a wide range of Cisco platforms
Configure Multipoint Layer 2 Services
This module provides the conceptual and configuration information for Multipoint Layer 2 Bridging Services, also called Virtual Private LAN Services (VPLS). Note VPLS supports Layer 2 VPN technology and
MLDP In-Band Signaling/Transit Mode
This module contains information for configuring Multicast Label Distribution Protocol (MLDP) in-band signaling to enable the MLDP core to create (S,G) or (*,G) state without using out-of-band signaling
Implementing LPTS. Prerequisites for Implementing LPTS. Information About Implementing LPTS
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
MPLS VPN Half-Duplex VRF
The feature provides scalable hub-and-spoke connectivity for subscribers of an Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) service. This feature addresses the limitations of hub-and-spoke
BGP-MVPN SAFI 129 IPv6
Subsequent Address Family Identifier (SAFI) 129, known as VPN Multicast SAFI, provides the capability to support multicast routing in the service provider's core IPv6 network. Border Gateway Protocol (BGP)
Cisco Nexus 7000 Next-Generation Hardware and NX-OS Software Release 6.0
Product Bulletin Cisco Nexus 7000 Next-Generation Hardware and NX-OS Software Release 6.0 PB688075 Product Overview Cisco continues its Unified Fabric innovations with the introduction of next-generation
Configuring SDM Templates
Information About, on page 1 How to Configure SDM Templates, on page 2 Monitoring and Maintaining SDM Templates, on page 3 Configuration Examples for SDM Templates, on page 4 Additional References for
Discovering Network Devices
CHAPTER 5 To generate reports, Prime Performance Manager must discover your network devices. This is accomplished by importing the device inventory from Cisco Prime Network, running device discovery from
Module 5: Cisco Nexus 7000 Series Switch Administration, Management and Troubleshooting
The Detailed course Modules for (DCNX7K) Configuring Cisco Nexus 7000 Switches Training Online: Module 1: Cisco Nexus 7000 Series Switches Cisco unified fabric trends Nexus 7000 series switch Deployment
Implementing Static Routes on Cisco IOS XR Software
Implementing Static Routes on Cisco IOS XR Software This module describes how to implement static routes. Static routes are user-defined routes that cause packets moving between a source and a destination
Cisco Nexus 3000 Series Switch NX-OS Verified Scalability Guide, Release 7.x
Cisco Nexus 3000 Series Switch NX-OS Verified Scalability Guide, Release 7.x First Published: 2015-0-24 Last Modified: 2017-11-23 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose,
Excessive ARP Punt Protection was supported.
Local Packet Transport Services (LPTS) maintains tables describing all packet flows destined for the secure domain router (SDR), making sure that packets are delivered to their intended destinations. For
BGP Event-Based VPN Import
The feature introduces a modification to the existing Border Gateway Protocol (BGP) path import process. The enhanced BGP path import is driven by events; when a BGP path changes, all of its imported copies
Configuring sflow. Information About sflow. sflow Agent. This chapter contains the following sections:
This chapter contains the following sections: Information About sflow, page 1 Licensing Requirements, page 2 Prerequisites, page 2 Guidelines and Limitations for sflow, page 2 Default Settings for sflow,
CCIE Service Provider
CCIE Service Provider 1.0 Core Routing 25% 30% 1.1. Interior Gateway Protocol 1.1.a. Describe, implement, and troubleshoot IS-IS 1.1.b. Describe, implement, and troubleshoot OSPFv2 and OSPFv3 1.1.c. Describe
Using the Management Ethernet Interface
This chapter covers the following topics: Gigabit Ethernet Management Interface Overview, page 1 Gigabit Ethernet Port Numbering, page 1 IP Address Handling in ROMmon and the Management Ethernet Port,
Manage Device Software Images
Set Up Software Image Management, page 1 Copy Software Images from Devices to the Image Repository (Create a Baseline), page 5 How Do I Find Out Which Images Are Used by Network Devices?, page 6 How Do
MPLS LDP Autoconfiguration
First Published: November 8, 2004 Last Updated: November 25, 2009 The feature enables you to globally configure Label Distribution Protocol (LDP) on every interface associated with a specified Interior
Manage Device Software Images
Set Up Software Image Management, page 2 Copy Software Images from Devices to the Image Repository (Create a Baseline), page 8 How Do I Find Out Which Images Are Used by Network Devices?, page 9 How Do
Cisco Router Configuration Handbook
Cisco Router Configuration Handbook Second Edition Dave Hucaby, CCIE No. 4594 Steve McQuerry, CCIE No. 6108 Andrew Whitaker Cisco Press 800 East 96th Street Indianapolis, IN 46240 IX Contents Introduction
OSPFv3 Route Filtering Using Distribute-List
The OSPFv3 route filtering using distribute-list feature allows users to filter the incoming routes that are programmed in routing table, and the outgoing routes that are advertised. Finding Feature Information,
MPLS over GRE. Finding Feature Information. Prerequisites for MPLS VPN L3VPN over GRE
The feature provides a mechanism for tunneling Multiprotocol Label Switching (MPLS) packets over a non-mpls network. This feature utilizes MPLS over generic routing encapsulation (MPLSoGRE) to encapsulate
Cisco Nexus 9200 Switch Datasheet
Cisco Nexus 9200 Switch Datasheet CONTENT Content... 1 Overview... 2 Appearance... 2 Key Features and Benefits... 3 NX-OS Software... 4 Nexus 9200 Compare models... 6 Specification of nexus 9200 series
Multicast only Fast Re-Route
First Published: November 24, 2010 Last Updated: November 24, 2010 (MoFRR) is an IP solution that minimizes packet loss in a network when there is a link or node failure. It works by making simple enhancements
Monitoring and visualization of LLDP information in Zabbix
Monitoring and visualization of LLDP information in Zabbix Agenda Introduction Technical choice & Problems Solution Use case Unresolved issue & Plan for the future How to use Introduction About me Takeshi
For Ethernet and IP/MPLS networks
DATA SHEET MPC480 EDGE ROUTER For Ethernet and IP/MPLS networks Cost efficient Pay-as-you-grow Edge Router for IP/MPLS Service Router/BNG The MPC480 is a cost efficient, pay-as-you-grow, router for Ethernet
Configuring VXLAN EVPN Multi-Site
This chapter contains the following sections: About VXLAN EVPN Multi-Site, on page 1 Licensing Requirements for VXLAN EVPN Multi-Site, on page 2 Guidelines and Limitations for VXLAN EVPN Multi-Site, on
Flexible NetFlow - MPLS Support
The feature supports the monitoring of the following MPLS-related fields: MPLS Labels 1-6 (3 bytes -- 20 bits of label, 3 bits of EXP, 1 bit of EOS). Top Label EXP i.e. the EXP field for label 1. Top Label
Use Plug and Play to Deploy New Devices
About Plug and Play, page 1 Prerequisites for Using Plug and Play, page 2 Plug and Play Workflow, page 2 Use the Plug and Play Dashboard to Monitor New Device Deployments, page 4 Create Plug and Play Profiles
CCIE Data Center Written Exam ( ) version 1.0
CCIE Data Center Written Exam (350-080) version 1.0 Exam Description: The Cisco CCIE Data Center Written Exam (350-080) version 1.0 is a 2-hour test with 80 110 questions that will validate that a data
N-Series Switches IDEAL FOR DATA CENTER NETWORKS AND HIGH-END CAMPUS NETWORKS
N-Series Switches IDEAL FOR DATA CENTER NETWORKS AND HIGH-END CAMPUS NETWORKS FS N-series switches are designed for data center networks and high-end campus networks, providing stable, reliable and secure
Implementing Management Plane Protection
The Management Plane Protection (MPP) feature in Cisco IOS XR software provides the capability to restrict the interfaces on which network management packets are allowed to enter a device. The MPP feature
For Ethernet and IP/MPLS networks
DATA SHEET MPC480 EDGE ROUTER For Ethernet and IP/MPLS networks Cost efficient Pay-as-you-grow Edge Router for IP/MPLS Service Router/BNG The MPC480 is a cost efficient, pay-as-you-grow, router for Ethernet
Cisco Ios Interface Configuration Guide
Cisco Ios Interface Configuration Guide If you are searched for the ebook Cisco ios interface configuration guide in pdf form, then you've come to faithful website. We furnish utter variation of this book
RADIUS Route Download
The feature allows users to configure their network access server (NAS) to direct RADIUS authorization. Finding Feature Information, page 1 Prerequisites for, page 1 Information About, page 1 How to Configure,
Configuring Easy Virtual Network Shared Services
Configuring Easy Virtual Network Shared Services This chapter describes how to use route replication and redistribution to share services in an Easy Virtual Network (EVN). Finding Feature Information,
ibgp Multipath Load Sharing
This feature module describes the feature. This feature enables the BGP speaking router to select multiple ibgp paths as the best paths to a destination. The best paths or multipaths are then installed
Cisco Modelling Labs Lessons from a Virtual World
Cisco Modelling Labs Lessons from a Virtual World Joel Obstfeld Distinguished Engineer Network Virtualisation The challenge - How do you deploy new services, make changes, or troubleshoot in the live network
H-VPLS N-PE Redundancy for MPLS Access
The feature enables two network provider edge (N-PE) devices to provide failover services to a user provider edge (U-PE) device in a hierarchical virtual private LAN service (H-VPLS). Having redundant
Configuring Bidirectional Forwarding Detection on Cisco IOS XR
Configuring Bidirectional Fwarding Detection on Cisco IOS XR Bidirectional fwarding detection (BFD) provides low-overhead, sht-duration detection of failures in the path between adjacent fwarding engines.
PASS4TEST. IT Certification Guaranteed, The Easy Way! We offer free update service for one year
PASS4TEST \ http://www.pass4test.com We offer free update service for one year Exam : 640-864 Title : Designing for Cisco Internetwork Solutions Vendor : Cisco Version : DEMO Get Latest & Valid 640-864
Cisco CRS-1 16-Slot Line Card Chassis Route Processor
Data Sheet Cisco CRS 16-Slot Line Card Chassis Route Processor B The Cisco CRS-1 Carrier Routing System is the industry s first carrier router offering continuous system operation, unprecedented service
Cisco ONE Software Overview. October 2017
Cisco ONE Software Overview October 2017 Agenda Why Cisco ONE Software and the Outcome Offers and Use Case Access (Wireless and Switching) WAN Cloud and Compute DC Networking Smart Accounts Resources Cisco
Cisco Configuring Cisco Nexus 7000 Switches v3.1 (DCNX7K)
Course Overview View Course Dates & Register Today This course is designed for systems and field engineers who configure the Cisco Nexus 7000 Switch. This course covers the key components and procedures
Static Routing Commands
This module describes the commands used to establish static routes on Cisco ASR 9000 Series Aggregation Services Routers. For detailed information about static routing concepts, configuration tasks, and
Cisco Prime Data Center Network Manager 6.2
Product Bulletin Cisco Prime Data Center Network Manager 6.2 PB639739 Product Overview Modern data centers are becoming increasingly massive and complex. Proliferation of new technologies such as virtualization
ECMP Load Balancing. MPLS: Layer 3 VPNs Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 900 Series) 1
Equal-cost multi-path routing (ECMP) is a routing strategy where next-hop packet forwarding to a single destination can occur over multiple "best paths" which tie for top place in routing metric calculations.
Network Virtualization Configuration Guide, Cisco IOS XE (Cisco NCS 4200 Series)
Network Virtualization Configuration Guide, Cisco IOS XE 16.5.1 (Cisco NCS 4200 Series) Revised: April 23, 2017, Enabling Network Virtualization Satellite Mode Overview The Satellite Network Virtualization