CERTIFICATE. Siliconware Precision Industries Co., Ltd. No. 8, Sec. 2, Changhsin Road, Hemei, Changhua, Taiwan
|
|
- Herbert Shepherd
- 6 years ago
- Views:
Transcription
1 CERTIFICATE This is to certify that No. 8, Sec. 2, Changhsin Road, Hemei, Changhua, has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS : 2009 (with product design) Certification decision This certificate is valid until Certificate registration no. IATF No. Main certificate registration no. Buffalo Grove, IL, USA TS For and on behalf of DQS GmbH Ganesh Rao Managing Director, UL DQS Inc. IATF Contract Office: DQS GmbH, August-Schanz-Straße 21, Frankfurt am Main, Germany Issuing Office: UL DQS Inc., 1130 West Lake Cook Road, Suite 340, Buffalo Grove, IL USA 1 / 2
2 Annex to Certificate Registration No.: TS09 Main Certificate Registration No.: IATF-No.: No. 8, Sec. 2, Changhsin Road, Hemei, Changhua, Remote Location Scope No. 123, Sec. 3, Da Fong Road, Tantzu, Taichung Ref. No.: No. 153, Sec. 3, Chung Shan Road, Tantzu, Taichung Ref. No.: No. 4, Creation Rd. IV, No. 17, Park Avenue II, No. 1-1, R&D RD. II, Strategic planning, Corporate quality, Sales, Marketing, Customer service, Purchasing, Supplier control, Human resource, Information technology. R&D, Calibration, Laboratory. This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
3 CERTIFICATE This is to certify that No. 153, Sec. 3, Chung Shan Road, Tantzu Taichung has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No TS For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 /
4 Annex to certificate registration no.: TS09 IATF-No.: No. 153, Sec. 3, Chung Shan Road, Tantzu Taichung Remote Location Scope No. 123, Sec. 3, Da Fong Road, Tantzu Taichung No. 4, Creation Rd. IV Science-Based Industrial Park Hsinchu Strategic planning, Policy making, Management review, Quality system management, Internal audit management, Sales, Marketing, Customer service, Purchasing, Supplier mnagement, Human resource, Information technology. No. 1-1, R&D RD. II Science-Based Industrial Park Hsinchu This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 /
5 CERTIFICATE This is to certify that No. 123, Sec. 3, Da Fong Road, Tantzu, Taichung, has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS : 2009 (with product design) Certification decision This certificate is valid until Certificate registration no. IATF No. Main certificate registration no. Buffalo Grove, IL, USA For and on behalf of DQS GmbH Ganesh Rao Managing Director, UL DQS Inc. IATF Contract Office: DQS GmbH, August-Schanz-Straße 21, Frankfurt am Main, Germany Issuing Office: UL DQS Inc., 1130 West Lake Cook Road, Suite 340, Buffalo Grove, IL USA 1 / 2
6 Annex to Certificate Registration No.: Main Certificate Registration No.: IATF-No.: No. 123, Sec. 3, Da Fong Road, Tantzu, Taichung, Remote Location Scope No. 153, Sec. 3, Chung Shan Road, Tantzu, Taichung Ref. No.: No. 4, Creation Rd. IV, No. 17, Park Avenue II, No. 1-1, R&D RD. II, R&D, Calibration and Laboratory. This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
7 CERTIFICATE This is to certify that CTSP Branch No. 19, Keya Rd., Daya Dist., Taichung, has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS : 2009 (with product design) Certification decision This certificate is valid until Certificate registration no. IATF No. Main certificate registration no. Buffalo Grove, IL, USA TS For and on behalf of DQS GmbH Ganesh Rao Managing Director, DQS Inc. IATF Contract Office: DQS GmbH, August-Schanz-Straße 21, Frankfurt am Main, Germany Issuing Office: DQS Inc., 1130 West Lake Cook Road, Suite 340, Buffalo Grove, IL USA 1 / 2
8 Annex to Certificate Registration No.: TS09 IATF-No.: CTSP Branch No. 19, Keya Rd., Daya Dist., Taichung, Remote Location No. 123, Sec. 3, Da Fong Road, Tantzu, Taichung, Scope Strategic planning, Quality System Management, Sales & Marketing, Customer service, Purchasing, Supplier Management, Human resource, Information technology. Calibration, Laboratory. No. 153, Sec. 3, Chung Shan Road, Tantzu, Taichung, This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
CERTIFICATE. Siliconware Precision Industries Co., Ltd. Scope: The design and manufacture of integrated circuit assembly.
CERTIFICATE This is to certify that No. 123, Sec. 3, Da Fong Road, Tantzu has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly. An
More informationCERTIFICATE. United Microelectronics Corporation
CERTIFICATE This is to certify that FAB 8ABCD No. 3, Li-Hsin Road II, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated
More informationCERTIFICATE. United Microelectronics Corporation
CERTIFICATE This is to certify that Fab 8AB, Fab 8C, Fab 8D No. 3, Li-Hsin Road II, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library
More informationCERTIFICATE. Walsin Technology Corporation. Scope: The design and manufacture of multi-layer chip capacitors (MLCC) and thin film passive components.
CERTIFICATE This is to certify that 806 has implemented and maintains a Quality Management System. Scope: The design and manufacture of multi-layer chip capacitors (MLCC) and thin film passive components.
More informationCERTIFICATE. United Microelectronics Corporation
CERTIFICATE This is to certify that Fab 8AB, Fab 8C, Fab 8D No. 3, Li-Hsin Road II, Science-Based Industrial Park with the organizational units/sites as listed in the annex has implemented and maintains
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Manufacture of Powder Metal Injection Moulded
More informationBUSCHE PLANTS 2/3/ EAST STATE ROAD 8 ALBION, IN 46701
BUSCHE PLANTS 2/3/5 1563 EAST STATE ROAD 8 ALBION, IN 46701 with a scope of: MANUFACTURE OF MACHINED COMPONENTS AND ASSEMBLY American Systems Registrar issues this certificate and applicable appendices
More informationCERTIFICATE. UTAC Thai Limited (UTL1) 237 Lasalle Road, Bangna, Bangkok Thailand. IATF First Edition
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that has established and applies a Quality Management System for Design, Development and Manufacture of Integrated Circuits
More informationCERTIFICATE. Wöhrle GmbH & Co. KG ISO 9001:2015. Kengelweg Wildberg Germany
including the sites and scope of application see enclosure. a Quality Management System. An audit was performed, Report No. 70003876. Proof has been furnished that the requirements according to ISO 9001:2015
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Development, production, sales and service
More informationHuber Engineered Materials ISO 9001:2008
Certificate US01/2693.00 The management system of Huber Engineered Materials 187 Gordon Street Fairmount, GA 30139, United States has been assessed and certified as meeting the requirements of ISO 9001:2008
More informationIATF - International Automotive Task Force Rules for Achieving and Maintaining IATF Recognition IATF Rules 5 th Edition Frequently Asked Questions
Rules for Achieving and Maintaining IATF Recognition IATF Rules 5 th Edition Frequently Asked Questions The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationCERTIFICATE. Rosenberger Hochfrequenztechnik GmbH & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Design & development, manufacturing and sales
More informationOfficial Certification Information
Quality Management Department Official Certification Information For ISO 9001: 2015 Quality Management Systems To whom it may concern, We are proud to declare that the (UOSSM) has been successfully audited
More informationDQS Group. DQS Medizinprodukte GmbH August-Schanz-Straße Frankfurt am Main, Germany 04/
DQS Group DQS Medizinprodukte GmbH August-Schanz-Straße 21 60433 Frankfurt am Main, Germany 04/2017 2016-05 DQS Group of companies DQS Holding DQS GmbH (100%) DQS Medizinprodukte GmbH (100 %) DQS CFS GmbH
More informationBORSIG GmbH Egellsstraße Berlin Germany
CERTIFICATE Management system as per DIN EN ISO 9001 : 2008 In accordance with TÜV NORD CERT procedures, it is hereby certified that BORSIG GmbH Egellsstraße 21 13507 Berlin Germany with the locations
More informationDQS Group. DQS Medizinprodukte GmbH August-Schanz-Straße Frankfurt am Main, Germany 04/
DQS Group DQS Medizinprodukte GmbH August-Schanz-Straße 21 60433 Frankfurt am Main, Germany 04/2017 2018-02 DQS Group of companies DQS Holding DQS GmbH (100%) DQS Medizinprodukte GmbH (100 %) DQS CFS GmbH
More informationISO : Competence Requirements Clause 7
ISO 17021 : 2011 Competence Requirements Clause 7 3 Terms and definitions 3.7 Competence Ability to apply knowledge and skills to achieve intended results 3 Terms and definitions 3.10 Technical area Area
More informationREVISION 5. International Automotive Task Force TRANSITION STRATEGY ISO/TS IATF Dated 1 March
REVISION 5 Dated 1 March 2018 International Automotive Task Force TRANSITION STRATEGY ISO/TS 16949 IATF 16949 2 CONTENTS Foreword Revision 1 dated 3 October 2016 Revision 2 dated 21 November 2016 Revision
More informationIATF Stakeholder Conference
IATF Stakeholder Conference 13 September 2017 Oberursel, Germany Rüdiger Funke (BMW Group) Number of certified sites against ISO/TS 16949 (and IATF 16949) 70,000 60,000 50,000 40,000 30,000 30,156 50,071
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationEN CEPA CERTIFIED: HERE IS HOW IT WORKS DQS - COMPETENCE FOR SUSTAINABILITY
EN 16636 - CEPA CERTIFIED: HERE IS HOW IT WORKS DQS - COMPETENCE FOR SUSTAINABILITY AT LAST: THE EUROPEAN STANDARD FOR PEST MANAGEMENT HAS ARRIVED After more than three years of intensive work, the European
More informationFrequently Asked Questions and Answers
Frequently Asked Questions and Answers Table of Contents 1. What is the Global Quality Seal?... 2 2. How will being certified help me to win new work and keep existing clients?... 2 3. Who is the certifying
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
More informationTransition in the Automotive Industry. Presented by: Desmond Govender
Transition in the Automotive Industry Presented by: Desmond Govender Background Summary of Transition Rules Certification Status Summary of Challenges Background In October 2016 IATF 16949:2016 was published
More informationPRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
More informationApplication for admission for IATF rd party auditors for IATF-recognized certification bodies
Preliminary remarks Please note that only the official contact person of an IATF-recognized certification body is authorized to register auditors to participate in the initial face-to-face training & examination
More informationRMS Client Guide. Application, Quote, Login & Password August 2018
RMS Client Guide Application, Quote, Login & Password August 2018 Table of Contents Request A Quote Slides 4-11 Accepting A Quote Slides 13-15 Applying for Additional Certifications 17-18 Password Help
More informationCertification Process Household and Similar Equipment
Certification Process Household and Similar Equipment Ordinance No. 371, of December 29, 2009 Objective: Evaluation of household and similar appliances, with a focus on security requirements in order to
More informationCERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM
CERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM Table of Content 1.0 INTRODUCTION... 2 2.0 CERTIFICATION PROCESS... 2 3.0 SCHEDULE OF FEES... 3 4.1 CERTIFICATION REQUIREMENTS... 3 4.2 Eligibility criteria
More informationAreas of impact for client consideration taken from the Rules for achieving IATF recognition Third edition for ISO/TS
Areas of impact for client consideration taken from the Rules for achieving IATF recognition Third edition for ISO/TS 16949 June 2009 1 Matrix of areas of impact on the client: Clause Area of impact content
More informationAdvanced Systems, Inc. Registration Form. (Please complete all information)
Registration Form (Please complete all information) To register by email, send a note to Advanced Systems, Inc., (mmoore@advancedsys.com) and indicate that you would like to register for the Field Sampling
More informationGuidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External
Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External PREPARED BY: Head (MSCD) APPROVED BY: C.E.O PAGE : 1 OF 10 Table of Content 1.
More informationAPPLICATION FOR ACCREDITATION OF CERTIFICATION BODIES
For office use: ENAO Acc. No Date of application First Accreditation Renewal of Accreditation 1.THIS FORM SHOULD BE COMPLETED IN FULL AND RETURNED TO : Ethiopian National Accreditation Office Attention:
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
More informationTÜV NORD Group Certification
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express prior consent is strictly forbidden. Hasler Rail AG Peter
More informationIATF Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB
IATF 16949 Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy
More informationPRODUCT CERTIFICATION SCHEME FOR FOOD CONTACT MATERIALS
Ref No: RACS/PCS/07 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Food
More informationE A54-UL 2012-AUGUST-29 XP POWER L L C SUITE E DYER RD SANTA ANA CA 92705
CERTIFICATE OF COMPLIANCE Certificate Number 20120829-E139109 Report Reference Issue Date E139109-A54-UL 2012-AUGUST-29 Issued to: XP POWER L L C SUITE 150 1241 E DYER RD SANTA ANA CA 92705 This is to
More informationNCS 8776 Certification scheme to NTA 8776
NCS 8776 Certification scheme to NTA 8776 RD_130, Issue 02 This guide describes the procedures and conditions for testing and certification used for conformity assessment within the NCS 8776 Certification
More informationIATF Transition Strategy Presenter: Cherie Reiche, IAOB
IATF 16949 Transition Strategy Presenter: Cherie Reiche, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy in April
More information- Manual - Stakeholder Analysis for all Standards ISO 9001/ISO 14001/ISO 45001/
Stakeholder Analysis for all Standards ISO 9001/ISO 14001/ISO 45001/ - Manual - by: DQS CFS GmbH August-Schanz-Str. 21 60433 Frankfurt GERMANY Effective: 2017-09-04 Stakeholder Analysis Overall Objective
More informationReport. Certificate Z
Report to the Certificate Z10 14 06 78930 002 Software tool for safety-related development TESSY Manufacturer Razorcat Development GmbH Witzlebenplatz 4 D-14057 Berlin Report no. RB 84018 C Revision: 1.3,
More informationMANILA TRAINING SCHEDULES Issue Date: 30 September 2016
ISO 9001:2015 QUALITY MANAGEMENT SYSTEM 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter QMS21 ISO 9001:2015 Interpretation 1 5,000.00 QMS21 09 01 02 03 04 06 QMS22 ISO 9001:2015 Interpretation and Implementation
More informationPRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS
Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationfulfils all applicable audit criteria for document management solutions of VOI Verband Organisations- und Informationssysteme e. V.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Finanz Informatik GmbH & Co. KG Theodor-Heuss-Allee 90 60486 Frankfurt am Main, Germany to confirm that
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationCERTIFICATE OF APPROVAL No CF 5349 TAIWAN DAEDALUS DOOR CONTROL CO. LTD
1 CERTIFICATE OF APPROVAL No CF 59 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of TAIWAN DAEDALUS DOOR
More informationIndonesia - SNI Certification Service Terms
Indonesia - SNI Certification Service Terms These Service Terms shall govern the Indonesian National Standard ( SNI ) Certification Services performed by the UL Contracting Party (as identified in the
More informationInternet copy. DSRC Key Management. Annex 2.5 to Joint Venture Agreement Toll Service Provider Agreement
DSRC Key Management Annex 2.5 to Joint Venture Agreement Toll Service Provider Agreement This copy of the document was published on and is for information purposes only. It may change without further notice.
More informationC E R T I F I C A T E
C E R T I F I C A T E for the Energy Management System as per In accordance with TÜV NORD CERT procedures, it is hereby certified that with the locations / sites according to the annex applies a management
More informationVDA 6.3 Module A General Principles for Process Auditors
VDA 63 Qualification as Process Auditor in Product Life Cycle with Certificate of Successful Completion - 1-week seminar (Module E) Seminar-Nr: 07-060 VDA licensed training This compact training course
More informationISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements
INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité
More informationFSC STANDARD. Standard for Multi-site Certification of Chain of Custody Operations. FSC-STD (Version 1-0) EN
FOREST STEWARDSHIP COUNCIL INTERNATIONAL CENTER FSC STANDARD Standard for Multi-site Certification of Chain of Custody Operations FSC-STD-40-003 (Version 1-0) EN 2007 Forest Stewardship Council A.C. All
More informationUSING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY
Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION
More informationSupplier Questionnaire
F KSM 1 Supplier Data Supplier Name / Address Business: DUNS-No. Tax-ID: Sales Tax-ID: E-Mail: www: Phone: E-Mail for Purchase: Responsible Person (Name/Function): Date: Signature: Number of Employees
More informationCERTIFICATE. P3 communications GmbH. Am Kraftversorgungsturm 3, D Aachen, Germany. hereby certifies that. Vodafone Portugal
CERTIFICATE P3 communications GmbH Am Kraftversorgungsturm 3, D-52070 Aachen, Germany hereby certifies that Vodafone Portugal Av. D. João II, Número 36, Parque das Nações, 1998 017 Lisboa, Portugal achieved
More informationISO 9001:2015 and TL 9000:2016-H (R6)/5.5
This is to certify that the Quality Management System of: 2601 Telecom Parkway Richardson, TX 75082 Central function listed above. See appendix for additional locations applicable to: The Sales, Marketing,
More informationRULES ON THE USE OF SIRIM QAS INTERNATIONAL CERTIFICATION MARKS
RULES ON THE USE OF SIRIM QAS INTERNATIONAL CERTIFICATION MARKS These rules specify how SIRIM QAS International s certification marks shall be depicted and conditions relating to their use. A client whose
More informationfulfils all applicable audit criteria for document management solutions of VOI Verband Organisations- und Informationssysteme e. V.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Bundesagentur für Arbeit Regensburger Straße 104 90478 Nürnberg, Germany to confirm that its document
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SK ID Solutions AS Pärnu avenue 141 11314 Tallinn, Estonia to confirm that its trust service EID-SK
More informationVDA 6.3 Module A General Principles for Process Auditors
VDA 63 Qualification as Process Auditor in Product Life Cycle with Certificate of Successful Completion - 1-week seminar (Module E) Seminar-Nr: 07-060 VDA licensed training This compact training course
More informationBrocade ISO Certificate
Brocade ISO Certificate Cisco ISO Certificate APC ISO Certificate EMC ISO Certificate AeroHive ISO Palo Alto ISO Palo Alto ISO Certificate #2 Oberon ISO April 16, 2015 Oberon 1315 S. Allen St, Ste 410
More informationTraining Program on Transition to the 2015 ISO Standards
Training Program on Transition to the 2015 ISO Standards TRANSITION 2015 FOR ISO 9001 QUALITY MANAGEMENT SYSTEM QMS21 ISO 9001:2015 Interpretation 1.00 5,000.00 17 01 30 01 03 02 QMS22 ISO 9001:2015 Interpretation
More informationGUIDELINES ON THE USE OF SIRIM QAS INTERNATIONAL MANAGEMENT SYSTEM CERTIFICATION MARKS
GUIDELINES ON THE USE OF SIRIM QAS INTERNATIONAL MANAGEMENT SYSTEM CERTIFICATION MARKS These guidelines specify how SIRIM QAS International s management system certification marks shall be depicted and
More informationCertification of Quality Management Systems with respect to Product Compliance
Certification of Quality Management Systems with respect to This document describes in detail the steps Telefication follows for certification of the various Quality Management Systems with respect to.
More informationSIZ Informatikzentrum der Sparkassenorganisation GmbH Simrockstraße Bonn, Germany. Sicherer IT-Betrieb, Basisvariante, version 1.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SIZ Informatikzentrum der Sparkassenorganisation GmbH Simrockstraße 4 53113 Bonn, Germany to confirm
More informationIntroduction to GlobalPlatform Compliance Secretariat
Introduction to GlobalPlatform Compliance Secretariat Introduction Key to market stability is the adoption of proven standards. Industry acceptance of any standard or specification, however, will only
More informationC E R T I F I C A T E
C E R T I F I C A T E Management system as per In accordance with TÜV NORD CERT procedures, it is hereby certified that with the locations / sites according to the annex applies a management system in
More informationSMC Corporation of America Quality Manual. QMS ISO9001:2000, revision 10
SMC Corporation of America Quality Manual QMS ISO9001:2000, revision 10 12/03/2008 Approved: Mark Miller, QA Manager 1 PRINTED COPIES ARE UNCONTROLLED SMC Corporation of America Quality Manual Contents:
More informationPreparatory questionnaire for automotive standards audit
Anne 1 location Note: Please use this Anne for every location as needed Page 1 of 7 Dear customer, As a certification company for QM systems, we require information about your company so that we can create
More informationKENYA FOREST SERVICE DOCUMENT TITLE:
ISSUE NO: 1 PAGE: 1 of 6 ISSUE HISTORY ISSUE DESCRIPTION OF CHANGE PROCESS PILOT EFFECTIVE DATE 1 None, no change has been done. Database Administrator 14 th June 2010 REFERENCED DOCUMENTS COPY HOLDERS
More informationDQS Inc. Management Systems Solutions Certification Requirements
DQS Inc. Management Systems Solutions Certification Requirements DQS Inc. General Business Terms and Conditions The general terms and conditions defined in this document, the DQS Assessment and Certification
More informationCERTIFICATE. P3 communications GmbH. Am Kraftversorgungsturm 3, D Aachen, Germany. hereby certifies that. Telekom Romania
CERTIFICATE P3 communications GmbH Am Kraftversorgungsturm 3, D 52070 Aachen, Germany hereby certifies that Telekom Romania 319G Splaiul Independentei SEMA Park / Atrium House Building, 1st and 2nd floor
More informationInnovative Products, Superior Quality, Exceptional Service
Innovative Products, Superior Quality, Exceptional Service MFC is a privately held fabricating distributor of hydraulic and industrial hose, formed tubing, and related fittings. Our company prides itself
More informationCERTIFICATE. Issued Date: Sep. 15, 2011 Report No.: R-ITUSP02V02
CERTIFICATE Issued Date: Sep. 15, 2011 Report No.: 119081R-ITUSP02V02 This is to certify that the following designated product Product : 1 Port USB-to-Serial Adapter Trade name : Moxa Model Number Company
More informationMANAGEMENT SYSTEM CERTIFICATION BODY PT. INTERNATIONAL CERTIFICATION SERVICES QUALITY MANUAL RULES FOR USE OF LOGOS AND CERTIFICATION MARKS
Page 1 / 10 1. Scope 1.1 These guidelines contain provisions for using the International Certification Services (ICS) Logo, hereinafter referred to ICS logo to be used by companies / institutions / agencies
More informationAUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY
Requirement specification Certification of individuals: AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Auditor Lead Auditor rev 5.docx Page 1 1 Introduction
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationC E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20131213-E100527 Report Reference E100527-19890524 Issue Date 2013-DECEMBER-13 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This
More informationTaiwantrade Supplier Business Information Verification Report
Taiwantrade Supplier Business Information Verification Report Company City / Country: Presented to JOSN ELECTRONIC CO., LTD. 九晟電子股份有限公司 3F., No.12, Wugong 6th Rd., Xinzhuang Dist., New Taipei City 242,
More informationEC-CERTIFICATE (Full quality assurance system)
EC-CERTIFICATE (Full quality assurance system) This is to certify that the company has implemented and maintains a full quality assurance system which applies to the products at every stage from design
More informationUnpruning of message elements with CR-0612 for future T2S-CRs. CRG, 25 January 2018 Frankfurt am Main
Unpruning of message elements with CR-0612 for future T2S-CRs CRG, 25 January 2018 Frankfurt am Main CRG Outcome Outcome of last CRG meeting on 15 th December 2017 CRG members expressed a preference to
More informationOIML-CS PD-08 Edition 1
PROCEDURAL DOCUMENT OIML-CS PD-08 Edition 1 Signing the OIML-CS Declaration OIML-CS PD-08 Edition 1 ORGANISATION INTERNATIONALE DE METROLOGIE LEGALE INTERNATIONAL ORGANIZATION OF LEGAL METROLOGY Contents
More informationQUESTIONNAIRE TO ASSIST PREPARATION FOR AN ISMS CERTIFICATION
: 1 of 7 Questionnaire to prepare for a Certification Audit for Information Security Management Sytem (ISMS) 1 Purpose With the help of this questionnaire you can provide a detailed description of your
More informationCERTIFICATE. Infineon Technologies AG Am Campeon Neubiberg Germany ISO 9001:2015
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Am Campeon 1-12 85579 Neubiberg Germany including the sites and scope of application see enclosure has established and
More informationGeneral Rules for Product Certification by the co-operation of certification bodies (GRPC)
29. January 2018 General Rules for Product Certification by the co-operation of certification bodies (GRPC) Contents: 1 The Co-operation of Certification Bodies (CCB) 1.1 General 1.2 Procedure 1.3 CCB
More informationLevel Access Information Security Policy
Level Access Information Security Policy INFOSEC@LEVELACCESS.COM Table of Contents Version Control... 3 Policy... 3 Commitment... 3 Scope... 4 Information Security Objectives... 4 + 1.800.889.9659 INFOSEC@LEVELACCESS.COM
More informationSupplier-Management- Portal
Supplier-Management- Portal Supplier Registration Guide Welcome to the erfx-portal of MAGNA International. In order to register your company as a supplier we require information about yourself or the contact
More informationAccreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
More informationISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation
ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis
More informationGUIDELINES FOR CERTIFICATION OF MANAGEMENT SYSTEMS
GUIDELINES FOR CERTIFICATION OF MANAGEMENT SYSTEMS Page 1 of 7 TABLE OF CONTENT No. Content Page 1.0 INTRODUCTION 3 2.0 CERTIFICATION PROCESS 4 3.0 CERTIFICATION COST 5 4.0 CERTIFICATION REQUIREMENTS 4.1
More informationPRODUCT CERTIFICATION SCHEME FOR OXO-BIODEGRADABLE PLASTIC
Ref No: RACS/PCS/06 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Oxo-biodegradable
More informationCustom Designed Assemblies
INNOVATIVE HYDRAULIC HOSE SOLUTIONS AN ANISO ISO 9001:2000 COMPANY Custom Designed Assemblies At MFC, we work closely with our customers to develop the best products for their specific applications. Our
More informationDIR. Anodic DIR INSTRUCTION MANUAL
DIR INSTRUCTION MANUAL Contents Product Introduction Warranty List of parts Tools Necessary Instructions Aftercare instructions 9 Contact Us 10 Thanks for your purchase of our product :Anodic Styling Chairs.
More informationISO 9001 Auditing Practices Group Guidance on:
International Organization for Standardization International Accreditation Forum Date: 13 January 2016 ISO 9001 Auditing Practices Group Guidance on: Expected Outcomes The expected outcomes documents (given
More informationPRODUCT CERTIFICATION SCHEME FOR MILK AND DAIRY PRODUCTS
Ref No: RACS/PCS/16 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Milk
More information