CERTIFICATE. United Microelectronics Corporation
|
|
|
- Noreen Bond
- 6 years ago
- Views:
Transcription
1 CERTIFICATE This is to certify that FAB 8ABCD No. 3, Li-Hsin Road II, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated manufacture of Integrated Circuit wafers. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 / 2
2 Annex to certificate registration no.: IATF-No.: FAB 8ABCD No. 3, Li-Hsin Road II, Science-Based Industrial Park Remote Location Scope UMC USA Sales, Contract review. 488 De Guigne Drive Sunnyvale, CA USA This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
3 CERTIFICATE This is to certify that FAB 8E No. 17, Li-Hsin Road, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated manufacture of Integrated Circuit wafers. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No TS For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 / 2
4 Annex to certificate registration no.: TS09 IATF-No.: FAB 8E No. 17, Li-Hsin Road, Science-Based Industrial Park Remote Location Scope UT No. 3, Li-Hsin Road II Science-Based Industrial Park UMC USA contract review, internal audit management, management review, customer service, product design, process design, human resource, information technology, laboratory, logistics, marketing, packaging, policy making, purchasing, quality system management, sales, strategic planning, supplier management, testing, training. Sales, Contract review. 488 De Guigne Drive Sunnyvale, CA USA This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
5 CERTIFICATE This is to certify that FAB 8F No. 3, Li-Hsin Road VI, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated manufacture of Integrated Circuit wafers. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No TS For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 / 2
6 Annex to certificate registration no.: TS09 IATF-No.: FAB 8F No. 3, Li-Hsin Road VI, Science-Based Industrial Park Remote Location Scope UT No. 3, Li-Hsin Road II Science-Based Industrial Park UMC USA contract review, internal audit management, management review, customer service, product design, process design, human resource, information technology, laboratory, logistics, marketing, packaging, policy making, purchasing, quality system management, sales, strategic planning, supplier management, testing, training. Sales, Contract review. 488 De Guigne Drive Sunnyvale, CA USA This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
7 CERTIFICATE This is to certify that FAB 8S No. 16, Creation Road I, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated manufacture of Integrated Circuit wafers. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No TS For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 / 2
8 Annex to certificate registration no.: TS09 IATF-No.: FAB 8S No. 16, Creation Road I, Science-Based Industrial Park Remote Location Scope UT No. 3, Li-Hsin Road II Science-Based Industrial Park UMC USA contract review, internal audit management, management review, customer service, product design, process design, human resource, information technology, laboratory, logistics, marketing, packaging, policy making, purchasing, quality system management, sales, strategic planning, supplier management, testing, training. Sales, Contract review. 488 De Guigne Drive Sunnyvale, CA USA This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
9 CERTIFICATE This is to certify that FAB 12A No. 18, Nanke 2nd Rd., Tainan Science Park Sinshih Dist., Tainan City Taiwan 741, Republic of China has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated manufacture of Integrated Circuit wafers. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No TS For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 / 2
10 Annex to certificate registration no.: TS09 IATF-No.: FAB 12A No. 18, Nanke 2nd Rd., Tainan Science Park Sinshih Dist., Tainan City Taiwan 741, Republic of China Remote Location Scope No. 3, Li-Hsin Road II Science-Based Industrial Park UMC USA Strategic planning, policy making, internal audit management, management review, sales, marketing, contract review, customer service, product design, process design, purchasing, quality system management, supplier management and laboratory. Sales, Contract review. 488 De Guigne Drive Sunnyvale, CA USA This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
11 CERTIFICATE This is to certify that United Microelectronics Corporation (Singapore Branch) FAB 12i No. 3, Pasir Ris Drive 12 Singapore has implemented and maintains a Quality Management System. Scope: The design of IP/Library and the associated manufacture of Integrated Circuit wafers. An audit, conducted and documented in a report, has verified that this quality management system fulfills the requirements of the following ISO Technical Specification: ISO/TS 16949:2009 (with product design) Certificate registration no. Main certificate registration no. Issuing date This certificate is valid until Date of revision IATF No TS For and on behalf of DQS Nurani S. Venkatachalam Corporate Program Manager Automotive, DQS Holding GmbH Michael Drechsel Managing Director, DQS Holding GmbH IATF Contract Office: DQS Holding GmbH, Konrad-Adenauer-Allee 8-10, Bad Vilbel, Germany 1 / 2
12 Annex to certificate registration no.: TS09 IATF-No.: United Microelectronics Corporation (Singapore Branch) FAB 12i No. 3, Pasir Ris Drive 12 Singapore Remote Location Scope No. 3, Li-Hsin Road II Science-Based Industrial Park Contract review, Internal audit management, Management review, Customer service, Policy making, Purchasing, Quality system management, Sales, Strategic planning, Supplier management Product design, Process design. FAB 12A No. 18, 20, Nanke 2nd Rd. Tainan Science Park Sinshih Dist., Tainan City Taiwan 741, Republic of China UMC USA Sales, Contract review. 488 De Guigne Drive Sunnyvale, CA USA This annex (edition: ) is only valid in connection with the above-mentioned certificate. 2 / 2
CERTIFICATE. United Microelectronics Corporation
CERTIFICATE This is to certify that Fab 8AB, Fab 8C, Fab 8D No. 3, Li-Hsin Road II, Science-Based Industrial Park has implemented and maintains a Quality Management System. Scope: The design of IP/Library
CERTIFICATE. United Microelectronics Corporation
CERTIFICATE This is to certify that Fab 8AB, Fab 8C, Fab 8D No. 3, Li-Hsin Road II, Science-Based Industrial Park with the organizational units/sites as listed in the annex has implemented and maintains
CERTIFICATE. Siliconware Precision Industries Co., Ltd. Scope: The design and manufacture of integrated circuit assembly.
CERTIFICATE This is to certify that No. 123, Sec. 3, Da Fong Road, Tantzu has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly. An
CERTIFICATE. Siliconware Precision Industries Co., Ltd. No. 8, Sec. 2, Changhsin Road, Hemei, Changhua, Taiwan
CERTIFICATE This is to certify that No. 8, Sec. 2, Changhsin Road, Hemei, Changhua, has implemented and maintains a Quality Management System. Scope: The design and manufacture of integrated circuit assembly.
CERTIFICATE. Walsin Technology Corporation. Scope: The design and manufacture of multi-layer chip capacitors (MLCC) and thin film passive components.
CERTIFICATE This is to certify that 806 has implemented and maintains a Quality Management System. Scope: The design and manufacture of multi-layer chip capacitors (MLCC) and thin film passive components.
BUSCHE PLANTS 2/3/ EAST STATE ROAD 8 ALBION, IN 46701
BUSCHE PLANTS 2/3/5 1563 EAST STATE ROAD 8 ALBION, IN 46701 with a scope of: MANUFACTURE OF MACHINED COMPONENTS AND ASSEMBLY American Systems Registrar issues this certificate and applicable appendices
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Manufacture of Powder Metal Injection Moulded
CERTIFICATE. Wöhrle GmbH & Co. KG ISO 9001:2015. Kengelweg Wildberg Germany
including the sites and scope of application see enclosure. a Quality Management System. An audit was performed, Report No. 70003876. Proof has been furnished that the requirements according to ISO 9001:2015
CERTIFICATE. UTAC Thai Limited (UTL1) 237 Lasalle Road, Bangna, Bangkok Thailand. IATF First Edition
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that has established and applies a Quality Management System for Design, Development and Manufacture of Integrated Circuits
IATF - International Automotive Task Force Rules for Achieving and Maintaining IATF Recognition IATF Rules 5 th Edition Frequently Asked Questions
Rules for Achieving and Maintaining IATF Recognition IATF Rules 5 th Edition Frequently Asked Questions The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
IATF Stakeholder Conference
IATF Stakeholder Conference 13 September 2017 Oberursel, Germany Rüdiger Funke (BMW Group) Number of certified sites against ISO/TS 16949 (and IATF 16949) 70,000 60,000 50,000 40,000 30,000 30,156 50,071
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Development, production, sales and service
FIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
Application for admission for IATF rd party auditors for IATF-recognized certification bodies
Preliminary remarks Please note that only the official contact person of an IATF-recognized certification body is authorized to register auditors to participate in the initial face-to-face training & examination
CERTIFICATE. Infineon Technologies AG Am Campeon Neubiberg Germany ISO 9001:2015
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Am Campeon 1-12 85579 Neubiberg Germany including the sites and scope of application see enclosure has established and
ISO : Competence Requirements Clause 7
ISO 17021 : 2011 Competence Requirements Clause 7 3 Terms and definitions 3.7 Competence Ability to apply knowledge and skills to achieve intended results 3 Terms and definitions 3.10 Technical area Area
BORSIG GmbH Egellsstraße Berlin Germany
CERTIFICATE Management system as per DIN EN ISO 9001 : 2008 In accordance with TÜV NORD CERT procedures, it is hereby certified that BORSIG GmbH Egellsstraße 21 13507 Berlin Germany with the locations
REVISION 5. International Automotive Task Force TRANSITION STRATEGY ISO/TS IATF Dated 1 March
REVISION 5 Dated 1 March 2018 International Automotive Task Force TRANSITION STRATEGY ISO/TS 16949 IATF 16949 2 CONTENTS Foreword Revision 1 dated 3 October 2016 Revision 2 dated 21 November 2016 Revision
Innovative Fastening Technologies
Innovative Fastening Technologies Corporate Overview 2011 Update Infastech is one of the world s largest producers of engineered mechanical fasteners with revenues exceeding USD500 million and an industry
IATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
Taiwantrade Supplier Business Information Verification Report
Taiwantrade Supplier Business Information Verification Report Company City / Country: Presented to NAN TAI COLOR PRINTING CO., LTD. 南台彩藝印刷廠股份有限公司 No.85, Sec. 1, Zhonghua W. Rd., South Dist., Tainan City
Transition in the Automotive Industry. Presented by: Desmond Govender
Transition in the Automotive Industry Presented by: Desmond Govender Background Summary of Transition Rules Certification Status Summary of Challenges Background In October 2016 IATF 16949:2016 was published
CERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM
CERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM Table of Content 1.0 INTRODUCTION... 2 2.0 CERTIFICATION PROCESS... 2 3.0 SCHEDULE OF FEES... 3 4.1 CERTIFICATION REQUIREMENTS... 3 4.2 Eligibility criteria
FSC STANDARD. Standard for Multi-site Certification of Chain of Custody Operations. FSC-STD (Version 1-0) EN
FOREST STEWARDSHIP COUNCIL INTERNATIONAL CENTER FSC STANDARD Standard for Multi-site Certification of Chain of Custody Operations FSC-STD-40-003 (Version 1-0) EN 2007 Forest Stewardship Council A.C. All
Supplier-Management- Portal
Supplier-Management- Portal Supplier Registration Guide Welcome to the erfx-portal of MAGNA International. In order to register your company as a supplier we require information about yourself or the contact
CPS Training, Solution Certification, and Mentoring Services
CPS, Solution Certification, and Mentoring Services Solutions Services Expertise Technology www.ultimus.com info@ultimus.com 1. Introduction Ultimus offers several efficient and cost-effective services
CERTIFICATE. Issued Date: Sep. 15, 2011 Report No.: R-ITUSP02V02
CERTIFICATE Issued Date: Sep. 15, 2011 Report No.: 119081R-ITUSP02V02 This is to certify that the following designated product Product : 1 Port USB-to-Serial Adapter Trade name : Moxa Model Number Company
Official Certification Information
Quality Management Department Official Certification Information For ISO 9001: 2015 Quality Management Systems To whom it may concern, We are proud to declare that the (UOSSM) has been successfully audited
Differential Probe. GDP-040D for GDS-200 & GDS-300 Series QUICK START GUIDE GW INSTEK PART NO. 82DP-040D0MA1 ISO-9001 CERTIFIED MANUFACTURER
Differential Probe GDP-040D for GDS-200 & GDS-300 Series QUICK START GUIDE GW INSTEK PART NO. 82DP-040D0MA1 ISO-9001 CERTIFIED MANUFACTURER This manual contains proprietary information, which is protected
United for Excellence
United for Excellence Dear Customers, With the rising performance and shrinking feature sizes of our leading-edge production technologies, UMC's customers today enjoy unprecedented opportunities to develop
Areas of impact for client consideration taken from the Rules for achieving IATF recognition Third edition for ISO/TS
Areas of impact for client consideration taken from the Rules for achieving IATF recognition Third edition for ISO/TS 16949 June 2009 1 Matrix of areas of impact on the client: Clause Area of impact content
Huber Engineered Materials ISO 9001:2008
Certificate US01/2693.00 The management system of Huber Engineered Materials 187 Gordon Street Fairmount, GA 30139, United States has been assessed and certified as meeting the requirements of ISO 9001:2008
GUIDELINES FOR CERTIFICATION OF MANAGEMENT SYSTEMS
GUIDELINES FOR CERTIFICATION OF MANAGEMENT SYSTEMS Page 1 of 7 TABLE OF CONTENT No. Content Page 1.0 INTRODUCTION 3 2.0 CERTIFICATION PROCESS 4 3.0 CERTIFICATION COST 5 4.0 CERTIFICATION REQUIREMENTS 4.1
TUV Rheinland of North America, Inc Massachusetts Avenue, Boxborough, MA 01719
CERTIFICATE TUV Rheinland of North America, Inc. 1300 Massachusetts Avenue, Boxborough, MA 01719 Hereby certifies that CIMCOOL INDUSTRIAL PRODUCTS, LLC 3000 Disney St. Cincinnati OH 45209 has established
CERTIFICATE. Rosenberger Hochfrequenztechnik GmbH & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Design & development, manufacturing and sales
APPLICATION FOR ACCREDITATION OF CERTIFICATION BODIES
For office use: ENAO Acc. No Date of application First Accreditation Renewal of Accreditation 1.THIS FORM SHOULD BE COMPLETED IN FULL AND RETURNED TO : Ethiopian National Accreditation Office Attention:
Preparatory questionnaire for automotive standards audit
Anne 1 location Note: Please use this Anne for every location as needed Page 1 of 7 Dear customer, As a certification company for QM systems, we require information about your company so that we can create
Taiwantrade Supplier Business Information Verification Report
Taiwantrade Supplier Business Information Verification Report Company City / Country: Presented to JOSN ELECTRONIC CO., LTD. 九晟電子股份有限公司 3F., No.12, Wugong 6th Rd., Xinzhuang Dist., New Taipei City 242,
Supplier Questionnaire
F KSM 1 Supplier Data Supplier Name / Address Business: DUNS-No. Tax-ID: Sales Tax-ID: E-Mail: www: Phone: E-Mail for Purchase: Responsible Person (Name/Function): Date: Signature: Number of Employees
AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY
Requirement specification Certification of individuals: AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Auditor Lead Auditor rev 5.docx Page 1 1 Introduction
United for Excellence
United for Excellence Dear Customers, With the rising performance and shrinking feature sizes of our leading-edge production technologies, UMC's customers today enjoy unprecedented opportunities to develop
IATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
Frequently Asked Questions and Answers
Frequently Asked Questions and Answers Table of Contents 1. What is the Global Quality Seal?... 2 2. How will being certified help me to win new work and keep existing clients?... 2 3. Who is the certifying
VDA 6.3 Module A General Principles for Process Auditors
VDA 63 Qualification as Process Auditor in Product Life Cycle with Certificate of Successful Completion - 1-week seminar (Module E) Seminar-Nr: 07-060 VDA licensed training This compact training course
CNCA-C11-09:2014. Translated English of Chinese CCC Regulations: CNCA C11-09:2014. Translated by:
Translated English of Chinese CCC Regulations: CNCA C11-09:2014 Translated by: www.chinesestandard.net Sales@ChineseStandard.net Wayne Zheng et al. CNCA / CCC Serial No.: CNCA-C11-09:2014 CNCA-C11-09-2014
Certification Process Household and Similar Equipment
Certification Process Household and Similar Equipment Ordinance No. 371, of December 29, 2009 Objective: Evaluation of household and similar appliances, with a focus on security requirements in order to
Navigating ISO 9001:2015
Navigating ISO 9001:2015 Why the new ISO 9001 revision matters to everyone White paper Abstract This white paper takes a concise, yet detailed look at the ISO 9001:2015 revision. Published in September
NTS William C. McGinnis
NTS William C. McGinnis President-CEO, NTS Mr. McGinnis is President and CEO of NTS and is also a member of the Board of Directors. He has been with National Technical Systems for over 28 years and has
INFORMATION SECURITY MANAGEMENT
ISMS (ISO/IEC 27001:2005 to ISO/IEC 27001:2013) Transition Training Course (A17700) Two (2) Days It is recommended for ISMS registered Provisional Auditors, Auditors, Lead Auditors, Principal Auditors
VDA 6.3 Module A General Principles for Process Auditors
VDA 63 Qualification as Process Auditor in Product Life Cycle with Certificate of Successful Completion - 1-week seminar (Module E) Seminar-Nr: 07-060 VDA licensed training This compact training course
18, Agiou Thoma Str 19004, Spata Athens, GR t f e.
Who is AVRV S.A Founded in 2006 Headquarters in Greece Providing: Certification services 2nd party assessment services Inspection services Training services Technical Consulting services AVRV Vision We
Seagate Technology LLC Headquarters
This is to certify that the Quality Management System of: Headquarters 10200 S. De Anza Blvd Cupertino CA 95014 Central function listed above. See appendix for additional locations applicable to: Design
Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External
Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External PREPARED BY: Head (MSCD) APPROVED BY: C.E.O PAGE : 1 OF 10 Table of Content 1.
S1V3G340 External SPI-Flash Select Guide
S1V3G340 External SPI-Flash Select Guide Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson
Process Change Notice #
User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, how-to and design documents,
SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD V2-1
2000 Powell Street, Ste. 600 Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax www.scsglobalservices.com SCS FSC Chain-of-Custody Guidance for Certification of Multiple Sites FSC-STD-40-003
CNCA / CCC Serial No.: CNCA-C11-04:2014
Translated English of Chinese CCC Regulations: CNCA C11-04:2014 Translated by: www.chinesestandard.net Sales@ChineseStandard.net Wayne Zheng et al. CNCA / CCC Serial No.: CNCA-C11-04:2014 CNCA-C11-04-2014
Certification of Quality Management Systems with respect to Product Compliance
Certification of Quality Management Systems with respect to This document describes in detail the steps Telefication follows for certification of the various Quality Management Systems with respect to.
AT FIRST VIEW C U R R I C U L U M V I T A E. Diplom-Betriebswirt (FH) Peter Konrad. Executive Partner Senior Consultant
Our Contact Details IT-SCAN GMBH c/o: DOCK3 Hafenstrasse 25-27 68159 Mannheim E: info@it-scan.de W: www.it-scan.de Nationalität Berufserfahrung C U R R I C U L U M V I T A E Diplom-Betriebswirt (FH) Peter
EN CEPA CERTIFIED: HERE IS HOW IT WORKS DQS - COMPETENCE FOR SUSTAINABILITY
EN 16636 - CEPA CERTIFIED: HERE IS HOW IT WORKS DQS - COMPETENCE FOR SUSTAINABILITY AT LAST: THE EUROPEAN STANDARD FOR PEST MANAGEMENT HAS ARRIVED After more than three years of intensive work, the European
TÜV NORD Group Certification
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express prior consent is strictly forbidden. Hasler Rail AG Peter
IATF Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB
IATF 16949 Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy
SIZ Informatikzentrum der Sparkassenorganisation GmbH Simrockstraße Bonn, Germany. Sicherer IT-Betrieb, Basisvariante, version 1.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SIZ Informatikzentrum der Sparkassenorganisation GmbH Simrockstraße 4 53113 Bonn, Germany to confirm
Introduction to GlobalPlatform Compliance Secretariat
Introduction to GlobalPlatform Compliance Secretariat Introduction Key to market stability is the adoption of proven standards. Industry acceptance of any standard or specification, however, will only
NCS 8776 Certification scheme to NTA 8776
NCS 8776 Certification scheme to NTA 8776 RD_130, Issue 02 This guide describes the procedures and conditions for testing and certification used for conformity assessment within the NCS 8776 Certification
Taiwantrade Supplier Business Information Verification Report
Taiwantrade Supplier Business Information Verification Report Presented to SOLOMON GOLDENTEK DISPLAY CORP. Company City / Country: 富相科技股份有限公司 No.42, Singjhong Rd., Neihu District, Taipei City 114, Taiwan
IATF Transition Strategy Presenter: Cherie Reiche, IAOB
IATF 16949 Transition Strategy Presenter: Cherie Reiche, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy in April
Technologies Leading at Specialty. S C Chien VP of Specialty Technology and Corporate Marketing 27th May, 2015
Technologies Leading at Specialty S C Chien VP of Specialty Technology and Corporate Marketing 27th May, 2015 Outline Paving the Way for IoT Greener and Smarter Automotive Summary 2 IoT Redirects Foundry
GUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
Report. Certificate Z
Report to the Certificate Z10 14 06 78930 002 Software tool for safety-related development TESSY Manufacturer Razorcat Development GmbH Witzlebenplatz 4 D-14057 Berlin Report no. RB 84018 C Revision: 1.3,
Project NO: C07 Report NO: GC180528C07. June 27, 2018
Module Integration Report on Brand: Particle Industries,Inc Model: E402 HW: V007 SW: V0.8.0 Module Brand: u-blox Module Model: SARA-R410M-02B Module HW: 306A05 Module SW: L0.0.00.00.05.06 SVN: 02 Report
ISO 9001:2015 and TL 9000:2016-H (R6)/5.5
This is to certify that the Quality Management System of: 2601 Telecom Parkway Richardson, TX 75082 Central function listed above. See appendix for additional locations applicable to: The Sales, Marketing,
MANILA TRAINING SCHEDULES Issue Date: 30 September 2016
ISO 9001:2015 QUALITY MANAGEMENT SYSTEM 1st Quarter 2nd Quarter 3rd Quarter 4th Quarter QMS21 ISO 9001:2015 Interpretation 1 5,000.00 QMS21 09 01 02 03 04 06 QMS22 ISO 9001:2015 Interpretation and Implementation
KENYA ACCREDITATION SERVICE
KENAS-GUD-010 01 22/06/2013 22/07/2013 GUD 1 of 9 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role Signature
PRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
E A54-UL 2012-AUGUST-29 XP POWER L L C SUITE E DYER RD SANTA ANA CA 92705
CERTIFICATE OF COMPLIANCE Certificate Number 20120829-E139109 Report Reference Issue Date E139109-A54-UL 2012-AUGUST-29 Issued to: XP POWER L L C SUITE 150 1241 E DYER RD SANTA ANA CA 92705 This is to
QUESTIONNAIRE TO ASSIST PREPARATION FOR AN ISMS CERTIFICATION
: 1 of 7 Questionnaire to prepare for a Certification Audit for Information Security Management Sytem (ISMS) 1 Purpose With the help of this questionnaire you can provide a detailed description of your
Validation Report 11 September 2007
Validation Report DCM SHRIRAM CONSOLIDATED LTD. VALIDATION OF THE REVISED MONITORING PLAN OF THE REGISTERED CDM-PROJECT NO. 0332 AJBAPUR SUGAR COMPLEX COGENERATION PROJECT REPORT NO. 962892-RM 11 September
Page 1 SUPPLIER DECLARATION FORM
Page 1 SUPPLIER DECLARATION FORM Page 2 The South African Council for the Architectural Profession This form must be completed and submitted with TENDER: South African Council for the Architectural Profession
Areas of impact for client consideration taken from the Rules for achieving and maintaining IATF recognition 4 th Edition for ISO/TS 16949
Areas of for client consideration taken from the Rules for achieving and maintaining IATF recognition 4 th Edition for ISO/TS 16949 1 st February 2014 1 Foreword Introduction The IATF recognizes certification
DVI to VGA Converter DDAP
User s Guide DVI to VGA Converter DDAP Thank you for purchasing DDAP DDAP, This unique DVI Converter transports your DVI signal to analog graphic signal so that display devices without DVI input can be
ISO 9001 Auditing Practices Group Guidance on:
International Organization for Standardization International Accreditation Forum Date: 13 January 2016 ISO 9001 Auditing Practices Group Guidance on: Expected Outcomes The expected outcomes documents (given
ISO/IEC :2015 IMPACT ON THE CERTIFIED CLIENT
ISO/IEC 17021-1:2015 IMPACT ON THE CERTIFIED CLIENT P R E S E N T E D B Y S H A N N O N C R A D D O C K, P R O G R A M S & A C C R E D I T A T I O N S M A N A G E R TODAY S APPROACH What is ISO/IEC 17021-1:2015?
Sales Account Request and Streamline & Vehicle Registrations. Contents: Section 4: Company Registrations for Sales Program (page 5)
Updated February 2018 Sales Account Request and Streamline & Vehicle Registrations Contents: Section 1: Requesting Your New Account/Role (page 2) Section 2: Set up contact profile (page 3) Section 3: Create
Indonesia - SNI Certification Service Terms
Indonesia - SNI Certification Service Terms These Service Terms shall govern the Indonesian National Standard ( SNI ) Certification Services performed by the UL Contracting Party (as identified in the
Multi-Level Overlay Techniques for Improving DPL Overlay Control
Multi-Level Overlay Techniques for Improving DPL Overlay Control Charlie Chen 1, C Pai, Dennis u 1, Peter Pang 1, Chun Chi u 1, Robert (Hsing-Chien) Wu, Eros (Chien Jen) Huang, Marson (Chiun-Chieh) Chen,
PT. TÜV NORD Indonesia. CERTIFICATION PROCEDURE of ISO 37001
CERTIFICATION PROCEDURE of ISO 37001 PT. TÜV NORD INDONESIA CERTIFICATION PROCEDURE of ISO 37001 Document Number : PAB-TNI-001 Revision Number : 00 Issued Date : 16 Oktober 2017 Prepared by : Team SCS
ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements
INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité
Workshop Item 1 - ISO 9001: 2008 migration
Workshop Item 1 - ISO 9001: 2008 migration Joint IAF-ISO Communiqué on migration to ISO 9001: 2008 ISO 9001: 2008 does not contain any new requirements Accredited Certification to ISO 9001:2008 shall not
_isms_27001_fnd_en_sample_set01_v2, Group A
1) What is correct with respect to the PDCA cycle? a) PDCA describes the characteristics of information to be maintained in the context of information security. (0%) b) The structure of the ISO/IEC 27001
If you are searching for a ebook Ts spc manual in pdf format, then you've come to the faithful site. We furnish the complete release of this
Ts 16949 Spc Manual If you are searching for a ebook Ts 16949 spc manual in pdf format, then you've come to the faithful site. We furnish the complete release of this ebook in epub, txt, DjVu, doc, PDF
GSDB Online for Quality
Module 18 GSDB Online GSDB Online for Quality Module 18 The purpose of this module is to provide an overview of the Global Supplier Database (GSDB) Online system. Define GSDB Online / Understand the benefits
Internet copy. DSRC Key Management. Annex 2.5 to Joint Venture Agreement Toll Service Provider Agreement
DSRC Key Management Annex 2.5 to Joint Venture Agreement Toll Service Provider Agreement This copy of the document was published on and is for information purposes only. It may change without further notice.
APPLICATION FORM FOR CERTIFICATION BODIES Yoga School Certification Scheme
APPLICATION FORM FOR CERTIFICATION BODIES Yoga School Certification Scheme To apply for QCI Approval under Yoga School Certification Scheme, please complete this application form and send it to QCI at
C E R T I F I C A T E
C E R T I F I C A T E Management system as per In accordance with TÜV NORD CERT procedures, it is hereby certified that ONTEX BVBA Genthof 5 9255 Buggenhout with the locations / sites according to the
Innovation and Growth in Hsinchu Science-based Industrial Park, Chinese Taipei
Innovation and Growth in Hsinchu Science-based Industrial Park, Chinese Taipei Genda J. Hu ERSO/ITRI November 20,1998 Science Park -- Parallel with Taiwan Economic Growth 12,000 10,000 8,000 6,000 4,000
European Code of Conduct on Data Centre Energy Efficiency
EUROPEAN COMMISSION DIRECTORATE-GENERAL JOINT RESEARCH CENTRE Institute for Energy and Transport Renewable Energy Unit European Code of Conduct on Data Centre Energy Efficiency Introductory guide for applicants
Information technology Service management. Part 10: Concepts and vocabulary
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO/IEC 20000-10 First edition 2018-09 Information technology Service management Part 10: Concepts and vocabulary Technologies de l'information Gestion
SHUNG CHING ELECTRONIC TECHNOLOGY CO., LIMITED Your MCPCB and PCB supplier
SHUNG CHING ELECTRONIC TECHNOLOGY CO., LIMITED Your MCPCB and PCB supplier Supplier best services for customers Add:Hua Chuangda Nanshan District, Shenzhen City, China. Website: E-mail: Skype: sc.mcpcb