BIOCLASS AND ICLASS SE BIOMETRIC READER COMPATIBILITY APPLICATION NOTE

Transcription

1 BIOCLASS AND ICLASS SE BIOMETRIC READER COMPATIBILITY APPLICATION NOTE June 2017 hidglobal.com

2 Copyright 2017 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks HID GLOBAL, HID, the HID Brick Logo, and BIOCLASS, BIOCLASS SE, ICLASS, ICLASS SE, and SEOS are the trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Revision History Contacts Date Description Version June 2017 Initial Release A.0 For additional offices around the world, see corporate offices. North America 611 Center Ridge Drive Austin, TX USA Phone: Fax: Europe, Middle East and Africa Haverhill Business Park Phoenix Road Haverhill, Suffolk CB9 7AE England Phone: 44 (0) Fax: 44 (0) Asia Pacific 19/F 625 King s Road North Point, Island East Hong Kong Phone: Fax: Brazil Condomínio Business Center Av. Ermano Marchetti, 1435 Galpão A2 CEP Lapa - São Paulo/SP Brazil Phone: HID Global Customer Support: Page 2 of 6 June 2017

3 Contents 1 Scope Form Factor (Difference) Biometric Template Compatibility (Difference) Revision A bioclass Read Compatibility Revision A bioclass Enrollment Compatibility Function keys (Difference) iclass Serial Protocol (Difference) Specifications (Difference) iclass Read Priority over Seos (New Constraint) iclass and iclass SR Non-Default Template Location Configuration (Slight Design Change) Card, PIN and Fingerprint Presentation Order (Slight Design Change)... 5 June 2017 Page 3 of 6

4 1 Scope This Application Note details the compatibility between bioclass revision A / bioclass revision B and iclass SE Biometric readers. Each item is a categorized in parentheses as a Difference, New Constraint or Slight Design Change. The bioclass reader has been phased out by HID and has been replaced by the iclass SE Biometric reader. 1.1 Form Factor (Difference) Product bioclass revision A / B iclass SE Biometric reader Dimensions 8.43 x 4.17 x 2.28 (21.4 cm x 10.6 cm x 5.8 cm) 4.8" x 6.1" x 1.2" (12.2 cm x 15.6 cm x 3.0 cm) Impact for Migration from bioclass to iclass SE Biometric: Customers replacing a bioclass product with an iclass SE Biometric reader must ensure the installation environment has sufficient space for the iclass SE Biometric reader s dimensions. 1.2 Biometric Template Compatibility (Difference) Revision A bioclass Read Compatibility The iclass SE Biometric reader will read biometric templates from iclass and iclass SR cards enrolled by the following bioclass products: iclass CP575A Biometric Enroller and Programmer (6250B) bioclass Reader / Enroller RKLB B / 6188B The iclass SE Biometric reader will not read biometric templates from iclass and iclass SR enrolled by the following bioclass products: iclass CP575 Biometric Enroller (6250A) (sold in 2004 to 2008) Impact for Migration from bioclass to iclass SE Biometric: Customers with cards which will not read on the iclass SE Biometric reader will need to re-enroll biometric templates on their cards using the iclass SE Biometric reader Revision A bioclass Enrollment Compatibility The iclass SE Biometric reader will enroll biometric templates to iclass and iclass SR cards which the following bioclass products may read: bioclass Reader / Enroller RKLB B / 6188B bioclass Reader RKLB B bioclass Reader Writer RWKLB B The iclass SE Biometric reader will not enroll biometric templates to iclass and iclass SR cards which the following bioclass products may read: bioclass Reader RKLB A (sold in 2004 to 2008) bioclass Reader Writer RWKLB A (sold in 2004 to 2008) Impact for Migration from bioclass to iclass SE Biometric: Customers with bioclass products which will not read cards enrolled by the iclass SE Biometric reader will need to replace bioclass products with the iclass SE Biometric readers and re-enroll biometric templates on their cards using the iclass SE Biometric reader. Page 4 of 6 June 2017

5 1.3 Function keys (Difference) bioclass products provided four additional keys above the 3 x 4 keypad used for custom OEM controller functionality. The iclass SE Biometric reader do not provide these keys. Impact for Migration from bioclass to iclass SE Biometric: To facilitate function key functionality controller OEM integration will need to be modified to use alternative keypress sequence such as * 1 instead of function key iclass Serial Protocol (Difference) The iclass Serial Protocol available in bioclass Reader Writer RWKLB A / 6181B is not supported in iclass SE Biometric readers. iclass SE Biometric readers will optionally support the Open Supervised Device Protocol (OSDP). Impact for Migration from bioclass to iclass SE Biometric: To read cards with serial output, use the iclass SE Biometric reader with Wiegand communication and a 3rd party converter or the iclass SE Biometric Reader with OSDP communication. If card Read / Write is required, write functionality will need to be deprecated, existing readers will need to be replaced with iclass SE Biometric Readers and cards will need biometric templates re-enrolled using the iclass SE Biometric Reader. 1.5 Specifications (Difference) Specification bioclass RKLB57 / RWKLB575 iclass SE Biometric Voltage 9-12VDC 12VDC Current Consumption 245mA MAX AVG 299mA PEAK 255mA MAX AVG 320 PEAK Temperature 32 F to 113 F (0 C to 45 C) 14 F to 122 F (-10 C to 50 C) 1.6 iclass Read Priority over Seos (New Constraint) The iclass SE Biometric reader optionally reads iclass and Seos, only iclass or only Seos card technology. This can be configured via a configuration card ordered from HID Global. If a dual technology iclass / Seos card is presented to a reader configured for iclass and Seos technology, the iclass technology in the card will always be detected first and the card will only be read if there is a biometric template enrolled on the iclass technology. Impact for Migration from iclass to iclass / Seos cards: To read Seos card data from the Iclass / Seos cards configure the reader to read only Seos technology. 1.7 iclass and iclass SR Non-Default Template Location Configuration (Slight Design Change) Non-default template location for the iclass SE Biometric reader must be configured via configuration card. Impact for Migration from bioclass to iclass SE Biometric: If non-default template storage is required a configuration card or custom reader part number must be ordered from HID Global. 1.8 Card, PIN and Fingerprint Presentation Order (Slight Design Change) User card must be present card before fingerprint or PIN (for local PIN verify keypad mode). Impact for Migration from bioclass to iclass SE Biometric: User may need to modify the order they present authentication factors to the reader. June 2017 Page 5 of 6

6 hidglobal.com Page 6 of 6 June 2017