Compliant with ITU-T G.8262 (SyncE) for frequency synchronization; Compliant with IEEE (PTP) for phase and frequency synchronization

Transcription

1 itn2100 Multi Services Access Platform Raisecom s Multi-Service Access Platform offers a comprehensive deployment strategy for operators, carriers and ISPs with SDH-based applications. The MSAP product family consists of many devices that provide various services such as data, video, and LAN over PDH, SDH and Ethernet circuits, with carrier class reliability and full hardware redundancy, ensuring maximum service uptime. itn2100 MSAP is an aggregation device that incorporated dual TDM and IP cores. It provides 4 STM-1/STM-4 and 8 GbE on the line side, and various tributary interfaces such as STM-1, FiberMux, E1, E3, DS3, FE, V.35, V.24, and G.SHDSL.bis at the client side. Therefore, itn2100 is suitable for deployment in public/private and utility networks as a unified multiservice access solution. itn2100 can simplify E1 deployments and reduce OPEX by providing integrated E1 cards while eliminating massive E1 cables compared to tradition E1 service extraction from STM-1/STM-4 circuits. It is also very convenient to implement LAN service extensions by utilizing G.SHDSL.bis to aggregation client LAN services into VC12 or GbE for different transportation networks. itn2100 offers both SDH OAM and Raisecom proprietary management options to implement centralized network management. itn2100 Multi Services Access Platform itn2100-nms Management card itn2100 provides a cost effective total solution for carriers to extend coverage to potential customers and offering new services while reducing CAPEX on new devices. Diversified interface options and hardware redundancy ensure flexible applications from SME to a wide range of carrier solutions. Highlights Combine TDM&GE Various services Synchronization over Carrier Ethernet Static MPLS** Easy Management Adopt TDM and IP dual cores design, support STM16**, STM4, STM1 and GE uplink. Provide STM1 FiberMUX DS3 E3 E1 FE FX V.35 V.24 G.SHDSL.bis services access. Compliant with ITU-T G.8262 (SyncE) for frequency synchronization; Compliant with IEEE (PTP) for phase and frequency synchronization Support static MPLS as a Provider Edge (PE) device Management via Telnet, CLI, SNMP

2 Typical Application Figure.1 Various Services Aggregation

3 Figure.2 3G Mobile Backhauling Features Slot distribution Capacity Cross connection Protection Totally 15 slots, 1 for NMS module, 2 for power module, 2 for SDH uplink module, 10 for tributary module and thereinto 2 can for GE uplink module Totally 4 STM1 or 4 STM4 SDH uplink ports, 8 GE uplink ports Totally 40xSTM1 /30xDS3 or E3 electrical or optical /320xE1 electrical /40xFiberMux /80 Ethernet interfaces at tributary links 8 VC4 at each aggregation slot 1 VC4 and 2 GE at each tributary slot, while 4 VC4 at the 2nd &4th slots Totally 4 STM16 SDH uplink ports** Four levels cross connection granularity: 64K VC12 VC3 VC4 20x20 VC4 (STM1 card) or 32x32 VC4 (STM4 card) cross connection capacity 48x48 E1 cross connection capacity at 64kbps function via DXC card VC12 cross connection between all tributary units and aggregation unit and the cross connection direction support bidirectional unidirectional broadcast and loopback Redundant protection of SDH & GbE aggregation cards Redundant protection of multiservice FiberMux cards Redundant AC and DC power supplies 1+1 MSP and 1+1 LPP and SNCP protection at aggregation slots 1+1 MSP protection at 2nd and 4th tributary slots The protection switching time is less than 50 ms Support auto\force\manual switching and lock mode

4 SDH Clock Ethernet Clock IP features Management features Specifications Support revertive and nonrevertive protection switch mode The protection switch revertive time is configurable STM4/1 optical port line clock 2Mbit/2MHz external clock within clock sub-card Support SSM protocol Support Synchronous Ethernet (SYNC-E) Support IEEE BC and TC mode Support 2Mbit/2MHz external clock on switch card Support Link Aggregation function 4K 802.1q VLAN and Q-in-Q (double tag) Support 802.1D STP, 802.1s RSTP & 802.1w MSTP Transparent forwarding of BPDU, LACP and IEEE802.1x frames QoS support SP,WRR,SP+WR Support OAM 802.3ah,802.3ag Support broadcast storm control Support GE Ethernet ring Access control lists (ACLs) Support static MPLS* Telnet/CLI/SNMP(v1/v2/v3) In-band and out-of-band network management channel In-band network management channel support Ethernet ring function Support Ethernet bridge Support RIP protocol Support NAT and NAPT Support pre-configuration of service End to end management Discover the topology automatically Compliances SNMP and Connector type: RJ45 Standards & GB NM-EXT Port Standard: 10/100Base-Tx protocols YD/T /100Mbps Auto-negotiation GB Console port connector type: RJ45 GB configuration complies with RS232 standard YD/T bps/8bit/none parity/1 GB Dimension 6U high chassis GB mm 248mm 267mm (W D H) GB Weight < 7Kg (chassis with two power modules) GB <0.5Kg (NMS card) YD/T Power supply DC Power supply option YD/T

5 Power consumption Working environment Note 300W (at max load) 10W (NMS card) Temp: -5 ~ 50 Celsius RH:10 ~ 90% non-condensing *under developing ** future plan GB/T G.707 G.781 G.782 G.783 G.784 G.803 G.813 G.825 G.826 G.831 G.841 G.842 G.957 G.958 Ordering Information itn itn2100-nms PN (REV.C.00) chassis, 15 slots, without any modules, without power supply SNMP NMS module in itn2100, provide management and control function for the whole system