Managed Last mile Access Rack WAVES-12

Transcription

1 Managed Last mile Access Rack is a carrier-class Managed Multi-Service Access Platform, designed to enable complete service integration for Last Mile. With a high cross connect matrix of 1008*1008 VC-12 or 16*16 VC-4, provides access to legacy TDM based services as well as broadband IP based data services over Copper & Fiber transmission media. provides support for multi-rates starting from 64Kbps-2.3Mbps on SHDSL technology, 128Kbps-45.6Mbps on SHDSL.bis technology and provides higher data-rates and multi-service with its Optical Multiplexing & Ethernet over SDH (EoS) tributary modules. The services can be aggregated to either STM-1/STM-4 for an SDH uplink or Fast Ethernet/Gigabit Ethernet to support migration to NGN-IP based networks. The 6U high chassis consists of 15 slots with 2 slots for dual-redundant hot swappable power supply modules, one Network Management module to provide inband & out of band management options with Console access, TELNET, SNMP & LITEVIEW NMS application. The remaining 12 slots can be used to populate the aggregation cards and the tributary cards. Key Features Provides upto four STM-1or two STM-4 interfaces for aggregation Provides non-blocking cross connection of VC4 or Vc12 Provides Gigabit Ethernet aggregation for integration to next generation networks Chassis comprises of 15 slots which includes two power supply slots, one controller slots and 12 slots for aggregation/tributary modules. Multiple Clocking options Comprehensive diagnostics facility with loopback options Input Power (dual supply) : -36V ~ -72V DC or 90V ~ 265V AC Powerful SNMP management system: Provides configuration, diagnostics & monitoring options Provides centralized control of and its remote CPEs (WITE LITE, ECAT) in the network, including interface configuration, connection setup, alarm and monitoring Direct 10/100BaseT Ethernet connection enables real-time management of central and remote sites Supports In-band management with DCC Management Supports online upgrade of controller and tributary modules

2 Rack Rack Specifications Features modular chassis Height : 6U Number of slots : 15 Power supply : Two hot-swappable AC or DC Input power supply voltage : DC : -36V ~ -72V Short circuit protection : Yes Rated current : 20A Over current protection : 30A Noise : < 100mV p-p NMS agent module : 1 (Slot 0) Aggregation module : 2 (Slots 6,7) I/O modules : 10 (Slots 1,2,3,4,5,8,9,10,11,12) Port specification (NMS-1 module) Console : RJ45 ETH (for SNMP and Telnet) : RJ45 Power consumption : < 300W (at max load) Environment of operation : Operating temperature : -5 ~ 50 degree Centigrade Humidity : 5 ~ 90% non-condensing Storage temperature : -40 ~ 85 degree Centigrade Humidity : 20 ~ 90% non-condensing Dimensions (W x H x D) Weight : 480 x 267 x 248 mm : < 7 Kg (with dual power supply) Features of NMS module Powerful SNMP management system, provides configuration, diagnostic & monitoring Provides clock for the whole system Supports on-line upgrade of system and tributary board. Provides centralized control of all remote modems (WITE LITE, ECAT) in the network, including interface configuration, connection setup, alarm and monitoring Direct 10/100BaseT Ethernet connection enables real-time management of central and remote sites New software version can be downloaded onto the management unit via LAN by TFTP NMS module specifications Console Interface Connector type : RJ45 Standard : Complies with RS232 standard Bit rate : 9600bps SNMP and NM-EXT Interface: Connector type : RJ45 Standard : 10/100Base-T, 10/100Mbps Auto-negotiation 2Mbit/s Synchronous Clock Interface: Bit rate : 2048Kb/s±50ppm Code : HDB3 Impedance of interface : 75Ù (unbalanced) Electrical characteristics : Complies with ITU-T G.703 Frame structure : Complies with ITU-T G.704 Jitter tolerance : Complies with ITU-T G.823 RS232 Interface for User: Connector type : RJ45 Standard : Complies with RS232 standard Bit rate : 9600bps

3 Features of STM-1 Aggregation Unit STM-1 aggregation module for Provides two STM-1 optical interfaces with options of either two individual paths or 1+1 path protection Embedded cross module of 16x16 VC4, supports TU12, TU3 and VC4 cross-connection capability STM-1 Optical Interface Bit rate : 155 Mbps Line Code : NRZ Multiplexing structure : Complies with ITU-T G.707 Clock characteristics : Complies with ITU-T G.813 Electrical characteristics : Complies with ITU-T G.957 Jitter tolerance : Complies with ITU-T G.823, G.825 Optical interface type : SC connector STM-4 Aggregation Module STM-4 aggregation module for Provides two STM-4 optical interfaces with 1+1 path protection Supports VC-12/VC-4 mixed cross-connection capability Embedded cross module of 1008x1008 VC4, supports TU12, TU3 and VC4 cross-connection capability STM-4 Optical Interface Bit rate : 622 Mbps Line Code : NRZ Multiplexing structure : Complies with ITU-T G.707 Clock characteristics : Complies with ITU-T G.813 Electrical characteristics : Complies with ITU-T G.957 Jitter tolerance : Complies with ITU-T G.823, G.825 Optical interface type : SC connector

4 Features of 2GE Aggregation Unit 2GE aggregation module for Provides two Gigabit Ethernet ports Supports both optical and Electrical GE interfaces Aggregates Ethernet Traffic in to a GbE uplink for migration to PSN Interface : 2 10/100/1000Base-T Electrical ports (RJ-45 connectors) & Optical 1000-X (SFP interface) LED indicators Environment of operation : Operating temperature : Power, System status, Ethernet Link, Activity, Speed & Duplex : -5 ~ 50 degree Centigrade LITEVIEW NMS SHDSL.bis PIXIE ETH LAN E1s (Bridging/Routing) PBX TEKLINK-16 SHDSL WITELITE -2W E1 / V35 / ETH Router WITELITE -4W LAN 3 rd Party ADM STM-1 RING SHDSL.bis PDH ECAT Family ETH E1s LAN LAN MAPLE-13 SDH TEKLINK E1s LAN ETH (EOS) N X E1s FXS RS232/ V24 V35/ ETH FXO/ E&M/ E1s

5 Features of DS0 Tributary Module DS0 cross connection module for Supports 1536x K (equal to 48x48 lines E1) cross capacity Supports cross-connect for 64K services Supports VC-12/VC-4 mixed cross-connection capability Supports framed or unframed mode Supports PCM30 (G732S) & PCM31 (G732N) Supports master & slave clock (clock recovery from any of 48 E1 lines) Features of STM-1 Tributary Module STM-1 tributary module for Supports Dual STM1 optical interfaces for 1+1 protection Each service timeslot can access SDH network through the SDH aggregate unit of Supports Cross-Connecttion to SDH aggregation module (STM-1/STM-4) Supports VC-12 mixed cross-connection capability Supports Cross-Connect Capacity of 63 VC12 STM-1 Optical Interface Bit rate : 155 Mbps Line Code : NRZ Multiplexing structure : Complies with ITU-T G.707 Clock characteristics : Complies with ITU-T G.813 Electrical characteristics : Complies with ITU-T G.957 Jitter tolerance : Complies with ITU-T G.823, G.825 Optical interface type : SC connector

6 Features of 4E1 Optical Multiplexing Module Optical multiplexing Tributary Module providing 4 PDH optical ports to communicate with multiple remote CPE s via optical uplink integrating legacy TDM and Ethernet traffic Supports mapping of Ethernet traffic from remote CPE s to VC-12 by GFP/LAPS encapsulation (EoSDH) Supports mapping of E1 traffic to VC-12 Works opposite ECAT-04E remote CPE 4 PDH optical ports, each of 4*E1+100Mbps capacity Each PDH optical port supports 150Mbps data rate Supports ALS function and Dying Gasp Features of 4E1 Optical Multiplexing Module with GE Uplink Optical multiplexing Tributary Module providing 4 PDH optical ports and one Gigabit Ethernet uplink to communicate with multiple remote CPE's via optical uplink integrating legacy TDM and Ethernet traffic Supports 4*4E1 traffic capacity per module aggregated to STM-1 card GbE port provides uplink for Ethernet traffic from remote CPE s 4 PDH optical ports, each of 4*E1+100Mbps capacity Each PDH optical port supports 150Mbps data rate 10/100/1000 Gbps Ethernet port Supports ALS function & Dying Gasp

7 Features of 8E1 Optical Multiplexing Module with Uplink Optical Multiplexing Tributary Module providing 2 PDH optical ports ((1+1) redundancy with port priority) and one Fast Ethernet interface integrating legacy TDM and Ethernet traffic Multiplexes 8 E1 streams and Ethernet traffic Fast Ethernet port provides uplink for Ethernet traffic from remote CPE Supports mapping of E1 traffic to VC-12 2 PDH optical ports (8*E1+100Base-T capacity) Each PDH optical port supports 150Mbps data rate 10/100 Mbps Ethernet port PDH Fiber ECAT-04 2 E1 PBX (1+1) STM-1/4 PDH Fiber ECAT-04 4 E1 PBX ETH LAN SWITCH SDH GE PDH Fiber Tributary ECAT-08 8 E1 ETH PBX LAN SWITCH PBX

8 Features of 2-Wire SHDSL Tributary Module Key Features Provides eight 2W G.SHDSL ports on two RJ45 interfaces Operates on multiple Data Rates (3~32)x64Kbps on each 1-pair cable Complies with ITU-T G for G.SHDSL TC-PAM Line Coding Provides extensive diagnostics, including loopbacks, G.SHDSL performance monitoring Compliance to standards : ITU-T G991.2 Interface : 8 G.SHDSL ports on two RJ45 interfaces LED indicators : System status, Interface status Environment of operation : Operating temperature Storage temperature Humidity : -5 ~ 50 degree Centigrade : -40 ~ +75 degree Centigrade : < 90%, non-condensing SDH Network SHDSL WITE LITE V.35 ROUTER STM-1 SHDSL WITE LITE E1 PBX GBE WITE LITE Packet Switched Network LITEVIEW SHDSL ETH

9 Features of 2-Wire SHDSL Module with Uplink Key Features Provides eight 2W G.SHDSL ports on two RJ45 interfaces Operates on multiple Data Rates (3~32)x64Kbps on each 1-pair cable Complies with ITU-T G for G.SHDSL TC-PAM Line Coding Provides extensive diagnostics, including loopbacks, G.SHDSL performance monitoring Compliance to standards : ITU-T G991.2 Interface : 8 G.SHDSL ports on two RJ45 interfaces and one 10/100 Ethernet Port LED indicators : System status, Interface status Environment of operation : Operating temperature : -5 ~ 50 degree Centigrade Storage temperature : -40 ~ +75 degree Centigrade Humidity : < 90%, non-condensing SHDSL 2.3 Mbps over 2W PSN GbE/ SHDSL 4.6 Mbps over 4W LITEVIEW

10 Features of SHDSL.bis Tributary Module G.SHDSL interface: 8x2-wires flexible configuration with aggregation function. Supports P-to-MP aggregation of eight nos. of WITELITE 2-Wire Ethernet modems (5.7Mbps each) Supports P-to-MP aggregation of four nos. of WITE LITE 4-Wire Ethernet modems (11.4 Mbps each) Supports P-to-P for 45.6 Mbps with WAVES-01and CW8SHDSL.bis Standards : Complies with enhanced G and ETSI Ethernet Throughput : 5.7Mbps at 2-wire (1 pair), 11.4Mbps at 4-wire (2-pair), 22.8Mbps at 8-wire (4 pairs) and 45.6Mbps (8 pairs) Transmission Distance : Upto 2.5 Km for 5.7 Mbps over each pair on 24 AWG Working mode : STU-C (master, by default), STU-R (slave) Performance : Switching fabric 0.832~1Gbps Capacity : 32MB SDRAM, 8MB flash, 128KB Switch Buffer Fast Ethernet port : 10/100 Base-TX (RJ-45, Cat5 UTP) MTU : 1632 Bytes Supports auto-mdi/mdix G.SHDSL.bis Line Interface : Line type : 2/4/8/16- wire Line Coding : 4/16/32 TC-PAM Line Rate : Mbps Impedance: : 135 Ohms Balanced Connector : RJ-45 SHDSL.bis (5.7Mbps over 2- wire) PSN GbE/ SHDSL.bis (11.4Mbps over 4- wire) LITEVIEW

11 Highlights of High Speed G.SHDSL.bis Module Highlights G.SHDSL Specification Service Assurance Advanced Network Service Transmission Easy Management TC-PAM 64 (per pair 11.4Mbps) support, 8/16 wires up to 91.2Mbps Supports IEEE802.1q, 802.1ad (QinQ), 802.1p and SLA Supports IEEE 802.3ah, 802.1ag, ITU-T Y.1731 OAM Supports TDM and Ethernet simultaneously one pair allows 1 Ethernet+1 E1 Management via Telnet, CLI, Web management, SNMP Features of High Speed G.SHDSL.bis Module Main feature Compact and high performance stand-alone unit Supports G.SHDSL.bis technology G.SHDSL specification TC-PAM 16 & TC-PAM 32 - ITU-T G (2004) TC-PAM 64 (per pair - 11Mbps) support ITU G Annex A, Annex B, Annex F and Annex G EFM bonding, 8/16 wires up to 91.2Mbps G.SHDSL interface 8x2 wires flexible configuration with aggregation function Supports PTMP aggregation of 8 nos. of PIXIE-2W Remote Modems Supports PTMP aggregation of 4 nos. of PIXIE-4W Remote Modems Supports PTP for High Speed Ethernet services opposite CW8SHDSL.bis-N module (Up to 91.2Mbps) Ethernet throughput 11.4Mbps at 2-wire(1 pair); 22.8Mbps at 4-wire (2 pair) 45.6Mbps at 8-wire(4 pair); 91.2Mbps at 16-wire(8 pair) Transmission distance Up to 2.6km (1.825miles) for 5.7Mbps over each pair on 26 AWG Working mode STU-C (Master, by default),stu-r (Slave) E1 interface mode Supports E1 unframed; framed:pcm30,pcm30c,pcm31,pcm31c Ethernet switching function MTU : 1632 Bytes Flow control IEEE 802.3x in full duplex mode Back pressure in half duplex mode Rate limit Max rate limit:100,000kbps Ingress rate limit per port with increment 64Kbps(64K-1M), 1Mbps(1-100M) Egress traffic shaping per port Storm Control Broadcast/Multicast/Unicast DLF storm control Control mode: Global/bps Default value:64kbps QOS Traffic priority, IEEE 802.1P, COS/DSCP/port-based Global queue scheduling, SP,WRR, SP+WR, WRR weight range:1-125 VLAN 4K active VLANs Port PVID overwrite Q-in-Q Port Q-in-Q L2TP BPDU, DOT 1x, LACP

12 Loopback detection Individual port will be shut down if loopback is detected Cable diagnostics support SLA Layer-2 / Layer-3 SLA MAC Address table 8K MAC address Add/remove/search MAC address table entries View MAC address statistics MAC address aging time configurable:15-3, 825s MAC address learning threshold per port Optional MAC address table limit per port:1-255 Management features Other features CFM IEEE802.1ag & Y MEP & 128 MA supported OAM IEEE802.3ah OAM (discovery, link performance monitor, remote loopback testing, remote failure indication) Extended OAM DHCP IDHCP Snooping DHCP Client DHCP Option82 Ways of Management CLI-based management through CONSOLE port or Telnet/SSH access Inband web-based management Inbuilt SNMP agent GUI-based concentrative management on LITEView NNM system Error tolerance System error report Fast recovery during serious error Hardware voltage & temperature monitoring Security User classification & password protection RADIUS TACAS+ Binding of MAC address & port Port Isolation PPPoE Agent Maintenance Debug information output Port statistics Port dynamic statistics Password recovery support Software update Xmodem/FTP upgrade in BOOTROM FTP/TFTP (system & configuration files)

13 Technical Specification Compliance to standards IEEE IEEE802.3ah-2004 IEEE BaseT IEEE802.3u 100BaseTX IEEE BaseT IEEE802.1d IEEE802.3ad IEEE802.1ad, IEEE802.3z IEEE802.3ab IEEE802.3x full duplex on IEEE802.1q-2003 IEEE802.1p, IEEE802.1w ITU G RFC2416 RFC2011 SNMPv2 RFC2012 SNMPv2 RFC2013 SNMPv2 Serial port configuration : Power supply Power consumption 9600bps/8bit/none parity/ 1 stop bit/none flow control : AC and DC via Waves-12 chassis : < 10W (at max load) Environment of operation : Operating temperature : 0 ~ 45 degree Centigrade Relative Humidity : 10 ~ 90% non-condensing Storage temperature : -25 ~ 60 degree Centigrade Relative Humidity : 5 ~ 95% non-condensing Dimensions (W x H x D) Weight : 240 mm x 25mm x225 mm : < 600 grams G.SHDSL interface 8/16 wires SHDSL 2*RJ45 connector TC-PAM 64 support Annex A,B,F,G support Indicators : LNK,STU-C Ethernet interface 1*1000M RJ45 connector Full/half duplex mode Auto MDI/MDI-X 100m distance Indicators:1000M, LNK, ACT Technical Specification SHDSL.bis PIXIE-4W WAVES -12 (22.8Mbps over 4-wire) Bonded SHDSL.bis copper pairs PSN GbE/ SHDSL.bis PIXIE-2W (11.4Mbps over 2-wire) STM-1/STM-4 SDH SHDSL.bis PIXIE-4W (22.8Mbps over 4-wire) LITEVIEW

14 Features of 1-Port EOS Tributary Module Ethernet Module for WAVES chassis to aggregate Ethernet traffic from customer sites (8*VCG s) in SDH network to Ethernet uplink interface Aggregates up to 8 VCG s to single Fast Ethernet aggregation trunk. Supports single Fast Ethernet port Supports GFP/LAPS encapsulation and VCAT, LCAS function Supports IEEE 802.1q VLAN & port VLAN Maximum 8K MAC addresses and 4096 VLAN ID Up to 4 output priority queues EOS-ADM STM-1 /STM-4 VCG-1 VCG-8 (Copper or Fiber) METRO SWITCH EOS-ADM LITEVIEW

15 Features of 8-Port Tributary Module 8-Port Tributary Unit for Ethernet Module for WAVES chassis for encapsulating Ethernet traffic from customer site to SDH network Aggregates Ethernet Traffic from each port to STM-1 aggregation trunk via VC-12 mapping (individual VCG s for each port) 4/8 10/100Base-T Ethernet ports (Electrical RJ-45 connector) Rate-Limiting with N*VC-12 steps sharing 63*VC-12 for the module Supports GFP/LAPS encapsulation and VCAT, LCAS function SWITCH EOS-ADM VCG-1 (Copper) SWITCH STM-1 /STM-4 VCG-8 (Copper) SWITCH SWITCH EOS-ADM LITEVIEW

16 Features of 32-Port E1 Tributary Module 32 E1 tributary Unit for Supports up to 32 Electrical E1 interfaces per module Supports mapping of E1 traffic to SDH aggregation card of 32 Electrical E1 interfaces per module (Balanced 120 Ohms Interface) Data rate support 2048Kbps ± 50 Support HDB3 line code Conforms to ITU-T G.703, G.823 E1 standards BTS E1 Links BTS ADM STM-1 /STM-4 E1 Links LITEVIEW

17 TM Ordering WAVES/12/STM-1/N/DC/R WAVES/M/PS300 WAVES/FAN WAVES/M/N WAVES/M/STM-4 WAVES/M/STM-1 WAVES/M/2GE WAVES/M/2W/8 WAVES/M//2W/8 WAVES/M/SHDSL.bis/2W/8 WAVES/M/SHDSL.bis/N/2W/8 WAVES/M/STM-1/T WAVES/M/32E1 WAVES/M/DS0 WAVES/M/OP/4E1x4/EOS/S2 WAVES/M/OP/4E1x4/GE/S2 WAVES/M/OP/8E1//R/S2 WAVES/M/VCG/1 WAVES/M/VCG/8 WAVES/M/4VCG/4 6U high, SNMP managed Last Mile Multi-Service Access rack with 2xSTM-1 interface module (1310nm Single-mode, 15Kms range), Network Management module, dual DC power supply modules and 1U high fan tray -48V DC power supply module 1U high Fan Tray for Network Management Module for SDH STM-4 Aggregation Module, 2 STM-4 optical interfaces (1310nm Single Mode, 15Kms range) SDH STM-1 Aggregation Module, 2 STM-1 optical interfaces (1310nm Single Mode, 15Kms range) Gigabit Ethernet Aggregation Module, 2 combo GbE interfaces (2*10/100/1000Base-T and 2*1000Base-X combo ports) G.SHDSL module with 8 2-wire G.SHDSL modems (2*RJ-45 interfaces) G.SHDSL module with 8 2-wire G.SHDSL modems (2*RJ-45 interfaces) & 1 10/100Base-T Fast Ethernet interface G.SHDSL.bis module with 8 2-wire G.SHDSL.bis interfaces (2*RJ-45) & 1 10/100Base-T Fast Ethernet interface High Speed G.SHDSL.bis module with eight 2-wire G.SHDSL.bis interfaces (2*RJ-45) & one 10/100/1000Base-T Fast Ethernet interface SDH STM-1 Tributary Module, 2STM-1 optical interfaces (1310nm Single Mode, 15Kms range) 32*E1 Balanced 120 Ohms Interfaces Tributary Module DS0 Cross-Connect Tributary Module 4-port PDH Optical Multiplexing Module (each port: 4E1 with 100Mbps capacity, 1310nm Single Mode, 60Kms range) with EOS functinality Single Mode, 25Kms range) with EOS functionality and 1+1 redundancy 2-port PDH Optical Multiplexing Module (8*E1 with 100Mbps capacity, 1310nm Single Mode, 60Kms range) with 1 10/100Base-T Ethernet port and 1+1 redundancy 1-port Fast Ethernet Module with EOS functionality & 1*10/100Base-T Interfaces 8-port Fast Ethernet Module with EOS functionality & 8*10/100Base-T Interfaces 4-port Fast Ethernet Module with EOS functionality & 4*10/100Base-T Interfaces MRO-TEK Limited Bellary Road, Hebbal Bangalore , INDIA Phone : Fax : mrotek@vsnl.com Web: Copyright MRO-TEK Limited is registered for Trade Marks with appropriate authorities. Specifications are subject to change without notice. E & OE. V12_05