ONU OVERTEK E8010U. User s Manual

Transcription

1 ONU OVERTEK E8010U User s Manual

2 Contents Chapter 1: Product introduction 1. Goods listing 2. Front panel instruction 3. Back panel instruction 4. Indication instruction 5. Main feature 6. Technology Chapter 2: Installation and link 1. Attention items for setting Chapter 3: software upgrade 1. Preparation 2. Means and process Chapter 4: Remark 1

3 6. As above method, upgrade app, pers in turn. Input rxapp order while upgrade app choose App3713_Rxxx_SPI_8Mb.tkf file, input rxpers order when up grade pers, choose Pers3713_RXXX.tkf file. 7. After finishing the upgrade. Pls restart ONU to check if the status is ok or not Model Description Chapter 4: Remark Model 10/100M 10/100/1000M CATV E8008U E8009U 8-1 E8010U E8011U E8012U E8013U E8014U E8015U 4-1 Chapter 1: Product introduction 1. Goods listing Open the package of fast Ethernet switch, and it contains the following: A set of ONU, A power supply, a user s manual and a stream line Please contact with supplier if above product and accessory is missing or damaged. 2. Front panel instruction Front panel of ONU have kinds of status indicators, as the following picture 2.1 E8008U/E8009U 2.2 E8010U /E8012U 2.3 E8011U/E8014U 2.4 E8013U/E8015U 13 2

4 3. Back panel instruction: Back panel of ONU from left to rig in turn is CATV Port, PON Port, RJ45 Ports, a bunch port, a replacement switch and a power supply jack, as following illustrate. 5. Firstly, upgrade Boot code, as following dos prompt input rxboot click the file and choose send file, then Boot3713_00XX_SPI_8Mb.tkf you want to upgrade, as following char: 3.1 E8008U/E8009U 3.2 E8010U/E8012U Click open, start to upgrade bootcode, as following chart:: 3.3 E8011U/E8014U 4. Indication instruction 3.4 E8013U/E8015U The signification of indicator from left to rig is as following: 3 12

5 4. As the dos prompt shown above, input load order as following chart: LED Color Status Description P O W O P T H W LLID M LINK /ACT - the indicator will when ONU is opened. Checking the TX or power supply adaptor, make sure power supply has connected well. Checking the TX or power supply adaptor, make sure power supply has connected well. Optic link is ok. Hardware is error Normal work status Optic link is ok Checking optic link is ok or not Corresponding indicator will when 100Mbps equipment connect with relevant port. glitter 100Mbps port does not joint equipment. Lig when equipment normally connect with 100Mbps ONU port Glitter when the port receive or transfer data 11 4

6 LINK 100 LINK 1000 DUP/ COL ACT Non-li g Non-li g Non-li g Lig glitter Lig when 100Mbps equipment link to relevant port when 100Mbps port does not joint equipment. Lig when 1000Mbps equipment link to relevant port when 1000Mbps port does not joint equipment. Lig when port is working base on full duplex mode Non-Lig when port is working base on half duplex mode Lig when equipment normally connect with 100Mbps ONU port Glitter when the port receive or transfer data 3. Connect ONU with relevant bunch port on the PC RS-232, then turn on the power, as following chart: 5 10

7 Chapter 2: Installation and link 1. Attention item for setting Please insure that there is suitable work environment and enough free space before installing machine. Please note the installing requirement as following: Power supply requirement: 100v-240v alternating current, power supply jack and equipment should be within 1.8m. Machine should be putted in the ventilated and dry environment, there must leave 10cm free space from front to back of machine to airiness Insure that around for machine has enough airiness port in order to diffuse quantity of heat, at the same time; don t put anything heavy on the converter. Chapter 3:Software upgrade As below introduction of software upgrade is available for single ONU. If it is mixed with our OLT, It s better to operate it in the OLT s management section depend on professional people. 3.1 Preparationz 1. A PC with RS-232-C port, a RS-232 stream line. 2. prepare Tera Term software in PC. 3. Prepare upgrade document: Boot3713_0093_SPI_8Mb.tkf,App3713_R132_SPI_8Mb.tkf, Pers3713_R132.tkf 3.2 Means and process: 1. Start PC, and click Tera Termpro, then start the upgrade software. 2. Set software, as following chart: 5. Main feature: Support single fiber WDM technology (downstream 1490mm, upstream 1310mm), only need to link with OLT together by one fiber, the transfer length s at least 20Km. Bandwidth distribution has flexible, downstream share bandwidth by adapting encrypt broadcast transfer way for different user..upstream share bandwidth by TDMA. Adjust automatically speed rate according to the line status. Support minimum speed rate adjustment base on 1kbps, and establish firm basic to fractionize business for telecommunication dealer. Support generally team broadcast function. User can choose to achieve mutual video multimedia business by themselves name (such as VOD, Video conference) Bind user, MAC address and IP address together in order to prevent account was embezzled hostility, ramble, virus spread abroad and attack of hostility data stream., so that can provide perfect safety guarantee measure for user. 9 6

8 Support multi LLID and single LLID configuration mean. Different user and business can adapt different LLID access. Guarantee user s different OOS grade. Installation and maintenance are very easy. Support differed local/long-distance and many means to manage configuration and upgrade of software. Work in partial port OLT. It can make long-distance malfunction diagnosis and orientation function come true, and greatly reduces maintenance workload. Network connects: Provide high speed date business for user. FTTH connects: Provide high speed date business and CATV business for family user which already has speech copper line resource. FTTB connects: adapt the mean of fiber to corridor or big corridor to provide high speed data business. Physics feature Physics dimension (length162 x width117 x high30, unit: mm) Power supply:dc 5V Function loss:5-15w Temperature: Operating temperature:0~50 Storage temperature:-30~60 Relative humidity:10~90% (non-condensation) Weig:<1000g Technology guide line: Standard :IEEE 802.3ah IEEE IEEE 802.3u IEEE 802.3x IEEE 802.3z IEEE802.1d IEEE 802.1p IEEE 802.1q IEEE 802.1x RFC1155 RFC1157 RFC1112 RFC1113 and so on. 128 digit AES Encrypt Support 8 logic link. Each Ethernet port support 64 Mac Addresses based on 802.1D Bridging Support 802.1Q VLAN Support 802.1P Support 40 stream (20 upstream/20 downstream) Inbuilt 1.25 MB buffering Support 802.3ah OAM Support 802.3ah transfer error and revise Inbuilt MIB 7 8

9