DD-OTDR-30 Optical Time Domain Reflectometer 4 DD-OTDR-60 Optical Time Domain Reflectometer 4 OFT-1120A PON Power Meter 5 FTTx

Transcription

1

2 Content Product Series Model Name Page Optical Power OFT-1135 Optical Light Source 1 Meters, Light OFT-1145 Optical Power Meter 1 Sources & Attenuators OFT-1155 Optical Attenuator 1 Series OFT-1165 Optical Loss Test Set 1 OFT-1136 Visual Fault Locator 2 Fiber Inspection, OFT-1170 Optical Cable Identifier 2 Optical Identifiers & Fault DD-FCI-10 Fiber Cable Investigator 2 Locators Series DD-FCI-20 Fiber Cable Investigator 3 DD-FCFT-50 Fiber Cable Fault Tracker 3 OTDR DD-OTDR-30 Optical Time Domain Reflectometer 4 DD-OTDR-60 Optical Time Domain Reflectometer 4 OFT-1120A PON Power Meter 5 FTTx FTTx Network Multi-function MST-3530S Maintenance Terminal 5 SDH-1620A SDH /PDH Transmission Analyzer 6 SDH Testing SDH-1620L SDH /PDH Transmission Analyzer 6 Transport BER-1560 Data Transmission Analyzer 7 Datacom PDH Testing BER-1530 Data Transmission Analyzer 7 BER-1580 Data Transmission Analyzer 7 IAT-1710E Integrated Access Tester 8 Ethernet Testing GEA-8130A Ethernet Analyzer 8 Network NTA-8710A Reflector 9 Cable Testing TPT-8020A Cable Tester 9 TPT-8010A Tone Tracker 9 ADSL Testing DA280 ADSL2+ Tester 10 Copper ADSL&VDSL DSL-3011A xdsl Tester 10 Access Testing DSL-3020V xdsl Tester 10 Battery ISBA-5210A Cranking Battery Analyzer 11 Analyzer ISBA-5218A Battery Analyzer 11

3 1. Optical 1.1 Optical Power Meters, Light Sources & Attenuators Series OFT-1135 Optical Light Source OFT-1145 Optical Power Meter OFT-1155 Optical Attenuator 1. Wavelength(nm):850/1300/1310/1490 /1550/1625; wavelengths output on 2. Output Power: > - 6dBm:1310nm/1490nm/1550nm a single port; /1625nm 2. High stabilization, built-in > -10dBm:850nm/1300nm; optic isolator; 3. VFL function(optional); 3. Tone frequency:270hz,1khz,2khz; 4. Energy save mode. 4. Connector:FC/PC; 5. Power Supply:AA 2 batteries or AC/DC power supply adapter; 6. Operate Time:About 16 hours. 1. Wavelength(nm):850/1300/1310/ 1490/1550/1625; 1. FC/SC/ST adapters; 2. Accuracy:±0.2dB; 2. Data storage; 3. Resolution:0.01dB; 3. Reference value storage; 4. Connector:FC&2.5mm UPP 4. VFL function(optional); (Option: SC/ST); 5. Energy save mode. 5. Power Supply:AA 2 batteries or AC/DC power supply adapter; wavelengths output on a single port; 2. Different attenuator range; 3. Can save current value as reference; 4. Can save 10 tracks attenuation value; 5. Energy save mode. 6. Operate Time:About 160 hours. 1. Wavelength(nm):1300/1490/1550; 2. Attenuator range:40/60/80 db; 3. Resolution:0.1dB; 4. Connector:FC/PC; 5. Power Supply:AA 3 batteries or AC/DC power supply adapter; 6. Operate Time:About 30 hours. 1. Wavelength(nm):850/1300/1490 /1550; 1. Data storage; 2. Output Power: 2. OPM/OLS/VFL in one > - 6dBm:1310nm/1490nm/1550nm; device; > -10dBm:850nm/1300nm; 3. Auto wavelength 3. Tone frequency:270hz,1khz,2khz; detection(optional); 4. Accuracy:±0.2dB; OFT-1165 Optical Loss Test 4. Energy save mode. 5. Connector:FC/SC&2.5mm UPP; Set 6. Power Supply:AA 2 batteries or AC/DC power supply adapter. Page 1 of 11

4 1.2 Fiber Inspection, Identifiers & Fault Locators Series OFT-1136 Visual Fault Locator 1. Wavelength:650nm±20nm; 1. Bright red laser at 650nm; 2. Operation Mode:Pulsed(2Hz)/CW; 2. Pulsed and CW operation; 3. Output Power:1/10/15/20/25mW; 3. Fast locate the broken 4. Connector:2.5mm or 1.25mm Universal point; connector; 4. Rugged and waterproof 5. Power Supply:AA 2 batteries or AC/DC design. power supply adapter; 6. Operate Time:About 50 hours. 1. Wavelength Range:800nm~1700nm; 1. Indicate the signal 2. Detector Type:InGaAs 2pcs; directions in fiber; 3. Fiber Type:0.9/0.25/2.0/3.0mm fiber; 2. Indicate the signal 4. Detect Tones:270Hz/1kHz/2kHz; presence or absence; 5. Accuracy:+10dBm to -30dBm OFT-1170 Optical Cable 3. Build in VFL; (Continuous Wave)/+10dBm to Identifier 4. Battery low indication. -25dBm(Modulated Signal); 6. Power Supply:AA 2 batteries. DD-FCI-10 Fiber Cable Investigator 1. Easy to use with touchscreen and keys; 2. Strong on-spot application capacity can meet the demands of accurately searching the target cable when looking over the directly-buried cable and pipe cables or cutting cables; 3. Monitoring the mechanical vibration conditions of the far-end cables; 4. VFL visible failure location port, which helps accurately orientate the target cable. 1. Wavelength:1550nm; 2. Minimum output power of light source:-15/-8dbm; 3. Maximum detection distance: 20km/40km; 4. Connector:FC/APC; 5. Power Supply:Lithium battery 7.4V/10.4A or AC/DC power supply adapter; 6. Operate Time:About 14 hours. Page 2 of 11

5 1. Easy to use with touchscreen and keys; 2. Senses mechanical vibration of optical cables over hundreds of kilometers; 3. Identifies target optical cables via audio or visual signals (bar graph or pulse mode) in complex DD-FCI-20 Fiber Cable environments; Investigator 4. Automatic and manual operation modes; 5. Lossless detection and high DD-FCFT-50 Fiber Cable Fault Tracker 1. Wavelength:1550nm; 2. Minimum output power of light Antenas Chile Ltda. source:-15dbm; 3. Unidirectional loss of optical cable: 10/28dB; 4. Maximum detection distance: 40km/100km; 5. Connector:FC/APC; 6. Power Supply:Lithium battery 7.4V/10.4A or AC/DC power supply adapter; 7. Operate Time:About 14 hours. identification accuracy. 1. Only need two or three times tracking can guide the constructors to find the fault site, make the repairing efficiently; 2. Accurate positioning: 1. Wavelength: 1310/1550nm; Locate accurately, make up 2. Dynamic:35dB; the cable data accurately 3. Distance scope (km): 0.3 to180; and perfectly; 4. Connector:FC/UPC; 3. Tracking cable without 5. Measurement duration:defined by hurt, no need to open the user/ 5s/10s/15s/30s/1min/2min/3min; cable connecting 6. Distance measurement precision: box,usually do not need operate in the well, keep constructors far from danger. 4. Simple and convenient: Easy to operate, easy to use, make things easy. ±(1m+5x10-5 xdistance+sampling interval). Page 3 of 11

6 1.3 Optical Time Domain Reflectometer(OTDR)Series 1. Determine fiber optic cable or 1. Wavelength:1310/1550nm; fiber optic s failure point, 2. Dynamic:30/28dB;32/30dB; connection point, breakpoint 3. Distance range(km):0.3 / 1 / 5 / 10 / position; 30 / 60 /120; 2. Describe fiber optic cable or 4. Maximum detection distance: fiber s loss distribution curve, 40km/100km; measure cable, fiber s length and 5. Connector:FC/UPC; the loss, attenuation coefficient 6. Measurement duration: DD-OTDR-30 Optical between two points; 15s/30s/1min/2min/3min; Time Domain 3. Measure fiber optic cable, optical 7. Distance measurement precision: Reflectometer fiber connector s insertion loss ±(1m+5x10-5 xdistance+sampling and reflection loss. interval). 1. Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved; 2. Multi-wavelength Measurement Mode: In the parameter setting, 1. Wavelength:850/1300/1310/1490/155 the wavelength can be 0/1625nm; automatically switched into the 2. Dynamic: multi-wavelength measurement 20/18dB;22/20dB;32/30dB;36/34dB;38/3 mode. Under this mode, the 6dB;42/40dB; analysis can be achieved on the 3. Distance scope (km): 0.3 to180; attenuation state of the same 4. Connector:FC/UPC; fiber section under different 5. Measurement duration: Defined by DD-OTDR-60 Optical wavelengths; user/5s/10s/15s/30s/1min/2min Time Domain 3. Trace Fixing Function: It can /3min; Reflectometer achieve the same-screen 6. Distance measurement precision: comparison and display of one ±(1m+5x10-5 xdistance+sampling trace with another real-time trace interval). or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed; 4. Multi-wavelength Analysis Page 4 of 11

7 Function: It can achieve the comparison, display and analysis functions of any trace file; 5. FTTx online testing, able to identify the splitter and the fiber s end. 1.4 FTTx 1. TFT color display, touch screen 1. Test three wavelength signal operation; including1490nm,1550nm, 2. Graphical interface, one interface 1310nm; can display all measurement 2. Dual-port design for pass through results; mode, support online monitoring 3. Power values adapt and termination measurement; green/yellow/red to distinguish 3. Provide ten groups of threshold OFT-1120A PON Power pass/alarming/fail status; selection; Meter 4. Built-in large capacity Li-ion 4. Built-in 500 records and upload via battery, long operation time. USB port. 1. Integrated Network multi-function maintenance like optical power meter, red light source functions, support ONU, xdsl simulation, PC simulation and cable tracing, broadband speed testing and other professional test function as a whole maintainer can solve all problems with one tester; MST-3530S FTTx 2. Can be installed electronic Network operation and maintenance Multi-function software based on Android Maintenance Terminal system to improve the efficiency of installing and maintenance and control efforts, WLAN RF signal strength and covering area, simulate wireless network card to connect network. 1. Important resource verification; 2. EPON/GPON simulation test; 3. PC simulation; 4. Electric Worksheet Management; 5. Mobile phone function; 6. Bar code scanning. Page 5 of 11

8 2. Transport Datacom 2.1 SDH Testing SDH-1620A SDH /PDH Transmission Analyzer 1. BER test for SDH and PDH; 2. Anomaly / defect test; 1. Easy to use, 10.4 color LCD, 3. Pointer monitoring; touch screen, pen operation; 4. APS / Service Disruption 2. Support line rate up to 2.5Gbps; testing; 3. Multi-task capability; 5. Tributary scan; 4. Clock interface; 6. Timing and synchronization 5. Event record and data test; management; 7. Optical power test; 6. Indicator simulation. 8. Voice monitoring. SDH-1620L SDH /PDH Transmission Analyzer 1. BER test for PDH and SDH STM-1; 2. Anomaly / defect test; 3. Pointer monitoring; 4. APS / Service Disruption testing; 5. Tributary scan; 6. Timing and synchronization test; 7. Optical power test; 8. Voice monitoring. 1. Easy to use, 10.4 color LCD, touch screen, pen operation; 2. Support line rate up to 155Mbps; 3. Multi-task capability; 4. Clock interface; 5. Event record and data management; 6. Indicator simulation. Page 6 of 11

9 1.3 PDH Testing BER-1560 Data Transmission Analyzer BER-1530 Data Transmission Analyzer BER-1580 Data Transmission Analyzer 1. Dual E1 port 2. E1, 64K and V Series test 3. Error performance analysis 4. Error and alarm injection 5. IP PING Test 6. Loop Delay Test 7. APS Test 8. Audio Test 9. E1 in-service monitoring 10. E1 Pulse Mask Test 1. E1 and V Series test; 2. Error performance analysis; 3. Error and alarm injection; 4. IP PING Test; 5. Loop Delay Test; 6. APS Test; 7. Audio Test; 8. E1 in-service monitoring; 1. Color TFT-LCD; 2. Operation time 8 hours; 3. On-line upgrading via RJ-45 port; 4. High capability storage: 1000 items; 5. Remote control. 1. Small size and easy to carry; 2. TFT true color display, touch screen operation; 3. Large capacity Li-ion battery more than 8 hours; 4. Expandable Data storage capacity, more than 5000 records. 9. E1 Pulse Mask Test. 1. Color TFT LCD with touch 1. Dual E1 ports, E1 screen; monitoring; 2. Dual E1 testing; 2. V series interface test; 3. E1 synchronous clock input and 3. T1 test; output; 4. Pulse mask; 4. E1 clock jitter Rx/Tx testing; 5. V & F measurement; 5. E1 PING testing; 6. APS, round trip delay 6. Frame relay testing; testing; 7. Perform the remote control set 7. Jitter measurement, Frame through Ethernet; relay testing; 8. Large capacity Li-ion battery 8. IP PING; guarantees 8 hours; 9. Remote control; 9. Operation; 10. Online upgrade. 10. Large capacity data storage, 10,000 records. Page 7 of 11

10 3. Network 3.1 Ethernet Testing IAT-1710E Integrated Access Tester GEA-8130A Ethernet Analyzer 1. Suitable for telecom operators clients verify bandwidth and fast troubleshooting; 1 10/100/1000M Ethernet Test 2. Applicable to MSTP/MSAP network Functions; opening and maintenance testing with 1)Link & Network all service interfaces; 2)Network Performance 3. One tester with multiple functions, 3)Network Tools provide integrated testing of E1, V 4)Network Analysis interface and Ethernet; 5)Cable & Port 4. A number of ways to verify channel 2 E1 Testing; bandwidth, support for symmetric and 1)PING asymmetric RFC2544 test; 2)Abnormal Defects Analysis 5. Original high-speed PING test function, 3)Loop Delay Testing can be arbitrary set PING rate, the 4)Switching Time Testing maximum rate support up to 1,000 3 V Series Interfaces Testing Mbps, able to quickly locate the faults; ( V.24/V.35 ); 6. Optimization of the defensive design to 1)PING ensure the safety and solid of the 2)Abnormal Defects Analysis instrument; 3)Loop Delay Testing 7. The operating interface similar to 4)Switching Time Testing. smartphone, more simple to use; 8. New hardware platform and optimized algorithm of the software make the device run more smoothly. 9. Dual port 10/100/1,000M; 10. Simple and easy operation: high-definition color touch screen and 1. BERT; graphical user interface; 2. Multiple Streams; 11. Provide comprehensive network 3. VLAN and MPLS; performance evaluation for the 4. Traffic Filters; deployment and maintenance of 5. Smart Loop; networks and services through traffic 6. RFC 2544; analysis, BER, and RFC2544, IPDV 7. Pass Through Mode; testing; 8. Cable and LAN test; 12. LAN tests: network discovery, diagnose, 9. POE. problem locating and many other functions make you know your network well and find network problems instantly. Page 8 of 11

11 13. Support terminal, pass mode, loopback, end to end mode; NTA-8710A Reflector 1. Full rates loopback for Layer 1 to 4; 2. Smart loopback as per different layer Rx data; 3. Support Key and Remote Web as operation mode; 4. Support RFC2544 test, BER Test, QoS; 5. Support and respond Ping test; 6. Support electrical and optical port. 14. Built-in large capacity battery. 1. Compact, Portable, smart and light; 2. Easy to use, two keys to perform all the loopback operation; 3. Compatible, end-to-end test with DADI Ethernet Analyzer. 3.2 Cable Testing 1. Port identification: telephone and network 1. Support 1000M RJ45 port auto identify port; work mode ; 2. Cable length test; 2. Length measurement up to 457 m; 3. Wire map test; 3. Full cable tests with display of PASS, 4. Audio line-tracking; wire map, opens, shorts, miss wires, TPT-8020A Cable Tester 5. Blink indicator; and split pairs, Compliance with 6. PING, DHCP; T568A/B. 7. Network scanning. TPT-8010A Tone Tracker Audio line-tracking. 1. Convenient operation; 2. Widely used with TPT-8020A, and other DADI product, DSL, Ethernet tester. Page 9 of 11

12 4. Copper Access 4.1 ADSL Testing 1. Easy to use, handheld design; 2. Power supply: Durable and large capacity battery operating time 1. ADSL/ADSL2/ADSL2+ test 5 hours; for network and physical 3. Diversify work modes can meet layer test; every demanding; 2. DMM (Digital Multimeter) 4. Display bit per tone with figures DA280 ADSL2+ Tester test. and numbers indications; 5. Qualified / unqualified wire indication function, support 4.2 ADSL/VDSL Testing user-defined threshold. 1. TFT color display, touch screen operation; 1. ADSL/ADSL2/ADSL2+ test 2. Graphical interface, easy to operate; in Physical layer and 3. Display bits per tone and SNR per Network layer; tone in graph and number; 2. DMM (Digital Multimeter) 4. Qualified / unqualified wire test. DSL-3011A xdsl Tester indication function, support user-defined threshold; 5. Tone generator function. DSL-3020V xdsl tester 1. VDSL2 Module; 1. ADSL/ADSL/ADSL2+/VDSL2 2. VDSL2 Physical Layer Test; /VDSL2+ Test; 3. VDSL2 Network Layer Test; 2. Large LCD touch screen; 4. VDSL2 Application layer 3. Windows CE OS, graphical test ( Net Scan, Net Rate interface, easy to handle; test, FTP Speed test); 4. Net Scan, freely and easily; 5. Ethernet test 5. Cable qualifies indication; 6. Cable test. 6. Tone generator function. Page 10 of 11

13 5. Battery Analyzer ISBA-5210A Cranking Battery Analyzer ISBA-5218A Battery Analyzer 1. Test various types of car power start batteries:6v,12v; 1. Battery internal resistance 2. A variety of testing modes: test; support single test and 2. Battery voltage test; auto-timing real-time test; 3. Battery capacity test; 3. Support domestic and 4. Battery capacity types international standards: selection test; domestic standard, American 5. Battery life test; standard and Japanese standard, 6. Battery starting capability German standard, European test; standard and old European 7. Battery charge system standard; test; 4. Built-in high-precision clock and 8. Battery charge ripple test. calendar, test data every time automatically with testing time records. 1. Automatically switch within the test range 1μΩ--40Ω, and resistance measurement resolution reaches 1μΩ; 1. Tests various battery types such 2. Test all kind battery as 2V, 4V, 6V, 8V, 12V, 24V and voltage under 48V, battery 48V; voltage can be tested LCD screen; automatically during 3. Built-in large capacity storage, resistance measurement; 90,000 data can be stored; 3. Test result can be 4. Multiple network interfaces: compared with the with RS232 port, TCP/IP port; comparator data directly, 5. Adapt wide temperature chip: and it supports normally work under -10 to permanently 200 types of 50. battery comparator data; 4. Positive and negative terminals temperature testing. Page 11 of 11