USER'S GUIDE. Optical Time Domain Reflectometer
|
|
- Noah Cummings
- 5 years ago
- Views:
Transcription
1 USER'S GUIDE Optical Time Domain Reflectometer
2
3 Warning and note WARNING You are cautioned that changes or modifications not espressly VISIBLE LASER RADIATION approved in this document could void yout authority to operate this AVOD EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION equipment. SEMICONDUCTOR LASER Wavelength: nm To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. INVISIBLE LASER RADIATION AVOD EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION SEMICONDUCTOR LASER Wavelength: nm CLASS I LASER PRODUCT NOTE As the laser is harmful to the eyes, do not attempt to disassemble the cabinet. Precautions for Use Use batteries At the same time, can not use different style or different capacitance batteries. And only use and charge the batteries the product equipped.. Avoiding condensation problems As much as possible, avoid sudden temperature changes. Do not attempt to use the drive immediately after moving it from a cold to a warm location, to raising the room temperature suddenly, as condensation may form with in the drive. If the temperature changes suddenly while using the drive, Stop using it and take out batteries for at least an hour. Storage When long time no use, must take out the batteries to avoid destroying the device. All is subject to the object, the manual is for reference only.
4 P1 Summarize The device uses the module design, includes the host, battery module and function module for customizing. The user's guide describes the use of OTDR, OPM, VFL, iola and VIP function modules and detailed parameters. Optic fiber connector VFL OPM Optical Testing Platform Touched screen OTDR OPM VFL iola VIP System Confirm Button Navigation Button Average measure Real-time measure Power indicator Power button Beep Function button
5 Power on/off P2 Press and hold " " button for 2 seconds to turn on the device, click on the required function to enter the function interface. OTDR VFL VIP OPM iola System
6 P3 Battery information The upper right corner of the interface is the battery status and power indication. It will show up different colors in different status, just as followed. Also user can check the battery information in system menu. OTDR VFL VIP OPM iola System 20% 0% 15% 65% Remain Remain less than 20%, displayed in red icon No battery Low battery, Connect to charger,show up charging Charging, Connect to charger, show up charging
7 OTDR P4 Click on " OTDR " to enter the measurement interface. In OTDR measurement interface, press "" or " " button to the start optic fiber measurement work directly. User can insert two external storage devices to our device, and it will show up the USB icons below the "date time". File name: 50 wavelength:1550nm range:60km pulse:2.5us 40 A m 0.000dB B m 0.000dB Measure settings 10 Events ,000 20,000 30,000 40,000 50, m Analyse OTDR Settings 1310nm 1550nm Wavelength 60Km 2.5us 30s Manual Range Pulse Time Mode Average measure Real-time measure Save/File Back to menu
8 P5 OTDR During optic fiber measuring, the information window will show the warning sign and the progress bar of remaining time. During measuring, click on "Stop measuring" or press " " or " " button to stop at anytime. File name: 50 wavelength:1550nm range:60km pulse:2.5us 40 A km dB B km dB Measure settings 10 Events ,000 20,000 30,000 40,000 50, m Analyse IEC : CFR INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT 800nm~1700nm, PW<20usec, P<600mW time left 16s Stop measuring Save/File Back to menu
9 OTDR-Storage device P6 Insert USB or TF CARDS to display the corresponding icon. And contain the corresponding options when storing the path and file operation to save the file Select device TF-Card Choose a device Internal TF-Card USB Quit
10 P7 OTDR- Measure settings Click on " Measure settings" to enter the measurement interface, which shows the buttons of OTDR settings, general settings and start measuring. User can select the mode to be manual or auto. Under manual mode, users can set the range, pulse and time by themself. User can select the wavelength measured, default are yellow 1310nm and orange 1550nm. File name: 50 wavelength:1550nm range:60km pulse:2.5us 40 A m 0.000dB B m 0.000dB Measure settings Measure settings Km 60Km 40Km 0 10,000 20,000 30,000 40,000 50, m Events Analyse OTDR Settings 1310nm 1550nm Wavelength 60Km 2.5us 30s Manual Range Pulse Time Mode Average measure Real-time measure Save/File Back to menu OTDR settings General settings Start measuring
11 OTDR-Average measure P8 Click on "Average measure" button or press "" button to enter the average measure interface. During measuring, click on "Stop measuring" or press " " or " " button to stop at anytime. The average measure can measure two wavelengths at the same time. File name: 50 wavelength:1550nm range:60km pulse:2.5us 40 A km dB B km dB Measure settings 10 Events ,000 20,000 30,000 40,000 50, m Analyse IEC : CFR INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT 800nm~1700nm, PW<20usec, P<600mW time left 16s Stop measuring Save/File Back to menu
12 P9 OTDR-Real-time measure Click on "Real-time measure" button or press "" button to enter the real-time measure interface. User can press navigation button up and down keys to increase or decrease the range, and click on "Stop measuring" or press " " or " " button to stop at anytime. Real-time measurement can only measure one wavelength at a time. File name: 50 wavelength:1550nm range:60km pulse:2.5us 40 A km dB B km dB Measure settings 10 Events ,000 20,000 30,000 40,000 50, m Analyse IEC : CFR INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT 800nm~1700nm, PW<20usec, P<600mW Stop measuring Save/File Back to menu
13 OTDR- OTDR Settings P10 Click on "OTDR Settings" to show the OTDR settings menu. There are 10 options in the menu, and click on each one can set the parameters. Click on "Confirm and exit" to save the changes. Click on "Restore" to restore system defaults. After finishing setting, click on "OTDR Settings" again to quit. OTDR Settings Reflection threshold 65.0dB End threshold 3.0dB Splice loss 0.05 Scatter coefficient Refractive rate Sampling resolution Standard Real-time analyse Off International units m Optical detect On Version S_OTDR_V0.0.0 Fiber section detect Off Measure settings Events Measure settings Analyse OTDR Settings 1310nm 1550nm Wavelength 60Km 2.5us 30s Manual Range Pulse Time Mode Average measure Real-time measure Save/File Back to menu OTDR settings
14 P11 OTDR- OTDR settings Reflection threshold Treat as an event when the reflection is higher than End threshold Treat as the end of optic fiber when the loss is higher 65.0dB setting value. 3.0dB than setting value. Splice loss 0.05 Treat as an event when the loss is higher than setting value. Scatter coefficient The intrinsic value of Rayleigh Scattering. Refractive rate Set the optic fiber's refractive rate for each wavelength, which can improve the measurement accuracy. Real-time analyse Off Set whether analyses events after real-time measuring or not. Optical detect Detect whether signal in fiber or not. Fiber section detect Detect the quality of the connector. The device will On Off remind user if in poor quality. Sampling resolution Standard Display the sampling resolution. International units m Select the international units in m, Km and Kft. Version Display the version. S_OTDR_V0.0.0
15 OTDR- Events P12 Click on "Events" to show the events list One page shows four event log. Click on the select buttons or slide in the events list area to turn the page up/down. If the arrow to the select button disappears, it means that there are no more events in that direction. Click on each event, the marker will locate to the record automatically. File name: 50 wavelength:1550nm range:60km pulse:2.5us Measure settings 10 Events Events list Information bar ,000 20,000 30,000 40,000 m 50,000 NO. Type Dist.(km) Loss(dB) Ref.(dB) Atten.(dB/Km) C.loss(dB) Start Reflect End Analyse Save/File Back to menu Select buttons
16 P13 OTDR- Analyse Click on "Analyse" to show the waveform analyse. This function can analyze the problem which is difficult to find in the auto measurement mode. It includes analyse of the type and result, marker control and waveform control. File name: 50 wavelength:1550nm range:60km pulse:2.5us 40 A m 0.000dB B m 0.000dB Measure settings 10 Events Information bar ,000 20,000 30,000 40,000 50, m B-A=0.0000km dB -- db -- db 4 points event loss A-B LSA loss Loss Attenuation Reflectance ORL Markers centered Select marker A Hide markers Markers reposition Blue curve Replace Hide Analyse Save/File Back to menu Waveform analyse Analyse of the type and result Marker control Waveform control
17 OTDR- Analyse- Analyse of the type and result P14 and B. Analyse of the type and result shows the distance difference and power difference between marker A The distance and attenuation between marker A and B B-A=0.0000km dB -- db -- db 4 points event loss A-B LSA loss B-A=0.0000km dB -- db -- db 2 points attenuation A-B LSA attenuation Loss Attenuation Reflectance ORL Loss Attenuation Reflectance ORL 4 points event loss: marker a, A, b and B in 4 points algorithm. Move the markers appropriately, the difference between the LSA value in "a, A" and "b, B" can be used to judge the loss more accurately. A-B LSA loss: marker A and B in 2 points algorithm. Calculate the difference between A and B by the LSA slope. B-A=0.0000km -- db Reflectance dB 2 points attenuation: calculate the real attenuation between marker A and B, then unitized to the loss per kilometer, which makes the noise interference larger. A-B LSA attenuation: obtained after calculating the LSA slope between marker A and B, and the attenuation is relatively stable. B-A=0.0000km dB -- db -- db Total ORL A-B ORL Loss Attenuation Reflectance ORL Loss Attenuation Reflectance ORL Reflectance: marker a, A and B in 3 points algorithm. Set "a, A" in the flat position before reflection and set B in the highest point of reflection to show the reflectance value. A-B ORL: the ORL value between marker A and B, Total ORL: the ORL value in the entire circuit.
18 P15 OTDR- Analyse- Marker control According to the option of analyse of the type and result, user can select different markers by clicking on "Select marker". Markers centered--- locate the markers in the middle of the waveform region. Hide markers--- hide/display all the markers. Markers reposition--- locate the markers to the zero position. Select market a Select market A Select market b Markers centered Hide markers Markers reposition Markers centered Hide markers Markers reposition Markers centered Hide markers Markers reposition Select market B Select market AB Markers centered Hide markers Markers reposition Markers centered Hide markers Markers reposition
19 OTDR- Analyse- Waveform control P16 OTDR can display the double curves for user to contrast and analysis. Replace--- replace the selected curve. Hide--- hide the selected curve. Blue curve Red curve Replace Hide Replace Hide
20 P17 OTDR- Save/File-Save After measuring, click on "Save/File" to enter the save interface. The user needs to insert the USB external storage device in advance. User can set the auto name function to be on/off and select the save path. The longest filename can be 40 characters. Save format Cancel and quit button 5_0001.SOR ESC Measure # % * ( ) - + Events : ;,.? / Analyse 123 EN Space Auto name Save path On Internal Save/File Back to menu Save/File Language and symbolic input keyboard Auto name Confirm button Modify save path
21 OTDR- Save/File-Save P18 Click on " " to enter the save settings interface after the file name is entered. Click on "Save" to confirm and exit. Internal/ File name Date Modified Size Measure settings Events Analyse Save/File 5_0001.sor Open Create new folder Save Quit Return to previous Back to menu Save File
22 P19 OTDR- Save/File Without new measurement, click on "Save/File" show the file menu. Slide the screen up/down to browse the files, double click to enter the folder or open one file. When a file be chosen, it will show up the file thumbnail at the bottom of the screen. Files can be selected multiply for file operation. File path Internal/ File name Date Modified Size _0001[1310nm 2.5us].sor :59: :53:55 85Kb _0002[1550nm 2.5us].sor :10:21 85Kb 8_0001[1310nm 2.5us].sor 8_0002[1550nm 2.5us].sor Check box :59: :33:25 66Kb 14Kb Measure settings Events Analyse Storage device 1550nm 60km 2.5us Delete Rename Create new folder Save as Quit Return to previous Save/File Back to menu Save/File Thumbnail of the file Function buttons
23 OTDR- Save/File- Storage device P20 Click on "Storage device" and choose the storage device. Click on "Confirm and exit" or "File operate" to confirm and exit. Set the path will still save after shutdown. File path Internal File name Date Modified Size _0001[1310nm 2.5us].sor :59: :53:55 85Kb _0002[1550nm 2.5us].sor :10:21 85Kb 8_0001[1310nm 2.5us].sor :59:55 66Kb Measure settings 8_0002[1550nm 2.5us].sor :33:25 14Kb Events Check box Analyse File operate Storage device Internal Set to Confirm default path and exit Formatting Save/File Back to menu Choose storage device Set to default path Confirm and exit
24 P21 OTDR- Save/File- Delete Select the file and click on "Delete", there will be deleting confirm box, click on "Confirm" will delete the selected file. File can be multi-selected, the folder can only be single-selected. Internal/ File name Date Modified Size _0001[1310nm 2.5us].sor :59:55 Internal/ :53:55 85Kb File name Date Modified Size 5_0002[1550nm 2.5us].sor 8_0001[1310nm 2.5us].sor :10: Kb Measure :59:55 5_0001[1310nm 66Kb 2.5us].sor settings :59: :53:55 85Kb Storage device 8_0002[1550nm 2.5us].sor 1550nm 60km 2.5us Delete Check box Rename :33:25 5_0002[1550nm 14Kb 2.5us].sor EventsDelete 8_0001[1310nm 2.5us].sor Create new folder Save as 8_0002[1550nm 2.5us].sor Analyse Quit Storage device Return to previous Save/File Back to menu 1550nm 60km 2.5us Confirm Check box Delete Rename :10: :59: :33:25 Cancel Create new folder Save as Quit 85Kb 66Kb 14Kb Return to previous Measure settings Events Analyse Save/File Back to menu
25 OTDR- Save/File- Rename P22 Select a file or a folder and click on "Rename" to enter the rename operation interface. User can click on " " to save. Internal/ File name Date Modified Size _0001[1310nm 2.5us].sor :59: :53:55 85Kb _0001[1550nm 2.5us].SOR ESC 5_0002[1550nm 2.5us].sor 8_0001[1310nm 2.5us].sor :10: :59:55 85Kb 66Kb Measure settings Storage device 8_0002[1550nm 2.5us].sor 1550nm 60km 2.5us Delete Check box Rename :33:25 Create new folder Save as 1 Quit 14Kb Return to previous Events # % * ( ) _ EN Save/File : ;,.? / Back to menu Space Measure settings Events Analyse Save/File Back to menu
26 P23 OTDR- Save/File- Create new folder Select a hierarchy and click on "Create a new folder" to create a new folder. User can input the folder name and click on " " to finish creating. Internal/ File name Date Modified Size _0001[1310nm 2.5us].sor :59: :53:55 85Kb Folder ESC 5_0002[1550nm 2.5us].sor 8_0001[1310nm 2.5us].sor :10: :59:55 85Kb 66Kb Measure settings Storage device 8_0002[1550nm 2.5us].sor 1550nm 60km 2.5us Delete Check box Rename :33:25 Create new folder Save as 1 Quit 14Kb Return to previous Events # % * ( ) _ EN Save/File : ;,.? / Back to menu Space Measure settings Events Analyse Save/File Back to menu
27 OTDR- Save/File- Save as P24 others. Select some files or a folder and click on "Save as" to save the files into the current storage device or Internal/ File name Date Modified Size _0001[1310nm 2.5us].sor :59: :53:55 85Kb _0002[1550nm 2.5us].sor Choose a device Quit :10:21 85Kb 8_0001[1310nm 2.5us].sor :59:55 66Kb Measure settings Internal 8_0002[1550nm 2.5us].sor :33:25 14Kb Events Check box Analyse Save/File Storage device 1550nm 60km 2.5us Delete Rename Create new folder Save as Quit Return to previous Back to menu
28 P25 OTDR- Save/File- Save as The file name in a folder can not be the same, otherwise the original file would be overed. Internal/ File name Date Modified Size _0001[1310nm 2.5us].sor :59: :53:55 85Kb _0002[1550nm 2.5us].sor 8_0001[1310nm 2.5us].sor :10:21 5_0002[1550nm 2.5us].sor this file already exists, do you want to continue? 12:59:55 85Kb 66Kb Measure settings 8_0002[1550nm 2.5us].sor Confirm Check box :33:25 Cancel 14Kb Events Analyse Save/File Storage device 1550nm 60km 2.5us Delete Rename Create new folder Save as Quit Return to previous Back to menu
29 OPM P26 Click on " OPM " to enter the optical power meter interface. OTDR VFL VIP OPM iola System
30 P27 OPM During measuring, click on "Clear Waveshape" to clear up the current waveform, click on "Suspend" to suspend or continue the measurement, click on "Auto" to set the waveform to adjust to the screen Wave -50 REF File Auto Suspend Clear Waveshape System Back to menu Auto Suspend Clear waveshape
31 OPM- Wave P28 Click on " Wave " to select wavelengths, include 850nm/1300nm/1310nm/1490nm/1550nm/1625nm Wave Wave REF File Auto Suspend Clear Waveshape System Back to menu
32 P29 OPM- REF Click on " REF " to turn on/off this function. When turn on it, the displayed value is the difference between the current value and the power value at activation Wave REF File REF 0.00dB REF:-70.00dBm Auto Suspend Clear Waveshape System Back to menu
33 VFL P30 Click on " VFL " to enter the visual fault locator interface. OTDR VFL VIP OPM iola System
34 P31 VFL- Open/Close Click on "Close" to turn off the laser. Click on "Open" to turn on it LASER RADIATION AVOID DIRECT EYE EXPOSURE DIODELASER 10mW MAX OUTPUT at nm CLASS lllb LSAER PRODUCT Laser Radiation!Do not stare into beam! Blink Close Open/Close System Back to menu
35 VFL- Blink P32 When the laser is on, click on "Blink" to turn the laser blink. Blink LASER RADIATION AVOID DIRECT EYE EXPOSURE DIODELASER 10mW MAX OUTPUT at nm CLASS lllb LSAER PRODUCT Laser Radiation!Do not stare into beam! Blink Close Blink System Back to menu
36 P33 VFL- System Click on "System" to view system information. Blink VFL System Information LASER RADIATION AVOID DIRECT Software EYE EXPOSURE version: S_VFL_V0.0.0 DIODELASER 10mW MAX OUTPUT at nm CLASS lllb LSAER PRODUCT Laser Radiation!Do not stare into beam! Blink Close System Back to menu
37 iola Optional function P34 Click on " iola " to enter the intelligent optical link go function. OTDR VFL VIP OPM iola System
38 P35 iola Optional function Click on "Start Test" to start the measurement, and after the measurement is completed, it will show the status of the optical fiber link. WaveLength 1310nm 1550nm 1310 nm 1550 nm Fiber total loss Pass/Not pass Pass Start Test A B Km EventList MeasureSet Dist.(km) 1310nm Loss(dB) 1550nm 1310nm Ref.(dB) 1550nm File Save Back to menu
39 iola Optional function P36 Click on "Measure Set" to show the measure settings menu. There are 8 options in the menu, and click on each one can set the parameters. WaveLength 1310nm 1550nm 1310 nm 1550 nm Fiber total loss Pass/Not pass Pass Start Test A B Km EventList MeasureSet Total loss threshold dB ORL threshold dB Loss threshold 0.300dB Reflection threshold dB File Refractive rate Scatter coefficient Reflection loss threshold 0.750dB Restore factory settings Save Back to menu
40 P37 VIP Optional function Click on " VIP " to enter the Fiber Microscope interface. OTDR VFL VIP OPM iola System
41 VIP Optional function P38 Click on "Start" to start the measurement. Video inspection probe Start Stop Back to menu
42 P39 System Click on "System" icon to enter the system setting interface. OTDR VFL VIP OPM iola System
43 System settings P40 There are nine options. Click on each one to enter the setting interface and then press Enter button or click on blank space to save and quit the system setting. English Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
44 P41 System settings- Language Click on "System" icon to enter the system setting interface. The default is the local language. The user can slide your finger left/right in the information bar or click the blue button to switch the language. English Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
45 System settings- Date/Time P42 Click on "Date/Time " icon to set the year, month, day, hour and minute information. Press button to switch to 12 or 24 time format. Press button to switch to Y/M/D or M/D/Y date format. 2017Y 01M English 01D 21H 35Min Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System 24 Switch time format International units Factory settings Version information Battery information Y /M /D Switch date format Security settings
46 P43 System settings- Energy saving mode Click on "Energy saving mode " to set the time of backlight and automatic off. With no operation in the setting time, the backlight will be off or the device will shutdown automatically. Backlight 15Sec later will be off device 10Min later will shutdown Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
47 System settings- Backlight brightness P44 Click on "Backlight brightness " to set the brightness. Dragging the black handle to set the brightness. Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
48 P45 System settings- International units Click on "International units" to show the unit selected. Metric Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
49 System settings- Factory settings P46 Click on "Factory setting" to return the factory settings. Click on "Yes" in the prompt box to clear up all the setting data. Be careful when using this function. Click here to return the factory settings. Information bar OTDR VFL VIP Language Date/Time All settings will Energy be reset! saving mode Backlight brightness Continue? OPM iolm System International units Confirm Factory settings Cancel Reset completed! Version System information will restart automatically! Battery information OK Security settings
50 P47 System settings- Version information version. Click on "Version information" to check the CPU ID, hardware version, firmware version and software Hardware version: Firmware version: Module version: OTDR H_DIGITAL_V0.0 S_MAIN_V0.0.0 MODULE_V0.0.0_C VFL VIP Information bar Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
51 System settings-battery information P39 P48 Click on "Battery information" to display the battery capacity and current battery status. Current capacity:65%,the battery is Good Information bar OTDR VFL VIP Language Date/Time Energy saving mode Backlight brightness OPM iolm System International units Factory settings Version information Battery information Security settings
52 P49 System settings- Security settings Security settings is used in the process of production and maintenance. All the code displayed is internal code, user should not operate by themself, otherwise may cause the device abnormal. 00#365**145 Information bar OTDR VFL VIP OPM iolm System clear clear Space back space change back space change Security settings back back
53 System settings- Security settings P50 Click on "Security settings" to display the project menu, Press" " to switch between digital, English, and symbolic input. 00#365**145 Information bar OTDR VFL VIP OPM iolm System clear Space back space change change Security settings back
54 P51 System settings- Security settings In the English input interface, you can press "" button to switch the input of the case. 00#365**145 Information bar OTDR VFL VIP # abc def OPM iolm * System clear ghl jkl mno Space back space change pqrs tuv wxyz Security settings en en back
55 System settings- Security settings P52 Press "" to clear all content, and press "" to enter the content one by one to clear, press "" or click "Security Settings" again to exit the security settings. 00#365**145 Information bar OTDR VFL VIP OPM iolm System clear Clear Space back space change Back space Security settings back Back
56 P53 Parameters Basic parameters Display Touch Type 7-inch color screen with a resolution of 1024 * 600 Multi-touch capacitive screen USB HOST USB 2 Number of Internal Stores (SOR) Network port Audio port Buzzer Backlight adjustment Energy saving mode Language Power supply Battery life >10000 RJ45, 10M / 100M 3.5mm headphone jack 14mm voltage buzzer Ten levels No operation auto power off and backlight dim (can cancel) English 7.4V, 5200mAh lithium polymer battery (A more powerful battery can be selected) Standby> 15 hours, measurement> 8 hours (A more powerful battery can be selected) Size 245mm 170mm 70mm Weight 1.55kg
57
58
Optical Time Domain Reflectometer USER'S GUIDE
Optical Time Domain Reflectometer USER'S GUIDE AVOD EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION AVOD EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION WARNING You are cautioned that changes
More informationMT-7610 Optical Time Domain Reflectometer USER'S GUIDE
MT-7610 Optical Time Domain Reflectometer USER'S GUIDE English Test Equipment Depot - 800.517.8431-99 Washington Street - Melrose, MA 02176 TestEquipmentDepot.com AVOD EYE OR SKIN EXPOSURE TO DIRECT OR
More informationAOR500-P PON Optical Time Domain Reflectometer USER'S GUIDE
AOR500-P PON Optical Time Domain Reflectometer USER'S GUIDE WARNING You are cautioned that changes or modifications not espressly approved in this document could void yout authority to operate this equipment.
More informationOptical Power Meter MT-7603
Optical Power Meter English USER'S GUIDE Optical Power Meter English WARNING You are cautioned that changes or modifications not espressly approved in this document could void yout authority to operate
More informationPON Optical power meter USER'S GUIDE
PON Optical power meter USER'S GUIDE English WARNING You are cautioned that changes or modifications not espressly approved in this document could void yout authority to operate this equipment. To reduce
More informationMT9085 Series. ACCESS Master. Quick User s Guide
Quick User s Guide MT9085 Series ACCESS Master For safety and warning information, please read this manual before attempting to use the equipment. Keep this manual with the equipment. MT9085 Series ACCESS
More informationAE3100 Series User Manual. Version 1.02
AE3100 Series User Manual Version 1.02 Preface Thanks for purchasing the AE3100 series OTDR (Optical Time Domain Reflectometer). This manual contains useful information about AE3100 series OTDR s functions
More informationFlexScan OTDR With SmartAuto and LinkMap
Test & Inspection FlexScan OTDR With SmartAuto and LinkMap Quick Reference Guide www.aflglobal.com or (800) 321-5298, (603) 528-7780 Controls, Display, Interfaces 1 2 4 8 1. Power button 2. Power jack
More informationFlexScan OTDR With SmartAuto and LinkMap
FlexScan OTDR With SmartAuto and LinkMap User s Guide Test & Inspection Contents Safety Information...5 Hardware Overview...7 Controls, Display, Interfaces...7 Front Panel Buttons and Indicators...9 Battery
More informationOFL250 OTDR. Quick Reference Guide. or +1 (800) , +1 (603)
OFL250 OTDR Quick Reference Guide www.aflglobal.com or +1 (800) 321-5298, +1 (603) 528-7780 Functional Keys Functional Keys KEY NAME KEY FUNCTION Power Press and hold (approx. 2 sec.) to turn the OFL250
More informationFlexScan FS200 OTDR With SmartAuto, FleXpress and LinkMap Quick Reference Guide
Test & Inspection FlexScan FS200 OTDR With SmartAuto, FleXpress and LinkMap Quick Reference Guide www.aflglobal.com or (800) 321-5298, (603) 528-7780 Controls, Display, Interfaces 1 2 4 8 1. Power button
More informationOTDR Testing Quick Reference Guide
Keys OTDR Testing Quick Reference Guide Key Name Key Function Power Press and hold (approx. 1 sec.) to turn the OTDR on or off or VFL Menu L and R Tab keys Arrow keys Enter Back Test Save ON 2 Hz - Press
More informationOFT-3 Optical Time Domain Reflectometer User's Guide
OFT-3 Optical Time Domain Reflectometer User's Guide Revision A 02/2014 Information contained in this manual is believed to be accurate and reliable. However, no responsibility is assumed by Precision
More informationOVR Optical Time Domain Reflectometer User's Guide
OVR Optical Time Domain Reflectometer User's Guide This guide is written for use with the OVR series. This includes the standard OVR OTDRs, OVR-PON and OVR-CWDM Revision D 04/2016 Information contained
More informationOptical Power Meter With VFL. User Manual
With VFL User Manual Contents 1. Summary...1 2. Functions...2 3. Specifications...3 4. Layout...4 5. Operation...5 6. Maintenance...9 7. Charge battery...9 8. Faults & Solutions...10 9. Software...10 1
More informationHCC-CW-201A. CWDM Analyzer. Operation Guide
CWDM Analyzer Operation Guide Table of Contents Description... 3 Features... 3 Specifications... 4 Safety Information... 5 Preparing for Operation... 6 Unpacking the instrument... 6 Front keys definition...
More informationFlexScan FS200 OTDR With SmartAuto, FleXpress and LinkMap
Test & Inspection FlexScan FS200 OTDR With SmartAuto, FleXpress and LinkMap User s Guide www.aflglobal.com or (800) 321-5298, (603) 528-7780 Contents Safety Information...5 Apple Inc. Legal Notice...6
More informationOptical CWDM Power Meter
User Manual Optical CWDM Power Meter TheFibers Inc. A-1109 Keumkang Penterium IT Tower, 282 Hagui-ro, Dongan-gu, Anyang-City, Korea Tel: +82-31-381-6108 Fax: +82-31-381-6109 Email: sales@thefibers.com
More informationUser Manual. Optical DWDM Power Meter ODPM-48
User Manual Optical DWDM Power Meter TheFibers Inc. A-1109 Keumkang Penterium IT Tower, 282 Hagui-ro, Dongan-gu, Anyang-City, Korea Tel: +82-31-381-6108 Fax: +82-31-381-6109 Email: sales@thefibers.com
More informationMini OTDR MOT-700 USER MANUAL
Mini OTDR MOT-700 USER MANUAL is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s., Červený Kříž 250, 586
More information5.6" Multi-function Monitor
5.6" Multi-function Monitor User s Manual Please read this Manual carefully before use of this product, and keep it handy for future reference. I. Packing List.. 2 II. Product Appearance... 3-5 III. Product
More informationOFT-CWDM SERIES. Operation Guide. Optical Time Domain Reflectometer (OTDR) with CWDM Wavelengths V
OFT-CWDM SERIES Optical Time Domain Reflectometer (OTDR) with CWDM Wavelengths V.9.12.17 Operation Guide 1.0 OTDR Quick Start Guide Press to turn on the OTDR. Connect the fiber to the appropriate port.
More informationINSTRUCTION MANUAL 920XC-20C 920XC-20M 920XC-30F 920XC-30P. Handheld OTDRs. Register this product at
INSTRUCTION MANUAL 920XC-20C 920XC-20M 920XC-30F 920XC-30P Handheld OTDRs Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More information920XC Training. 920XC Handheld OTDR. Training Presentation VER 1.0
920XC Training XC fibertools 920XC Handheld OTDR Training Presentation VER 1.0 OTDR Basic Operation Laser End of fiber Probe pulse Display Processor Coupler Detector Fiber under test Rayleigh backscatter
More information/ off / off 3. Press the Power button on the back of the base to power on the lamp; hold on the power button in the middle of the navigation buttons to power on the digital photo frame. 1. Press Exit
More informationIMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING (SAVE THESE INSTRUCTIONS): This manual contains important instructions that should be followed during installation
More informationFTE-7500 OTDR USER S MANUAL
FTE-7500 OTDR USER S MANUAL 8/29/2011 Avoid exposure Laser Radiation Emitted from the aperture. This product conforms to CDRH standards for laser product Per 21 CFR 1040.10 & 1040.11 Revision B SECTION
More informationRA3301Optical Multimeter
RA3301Optical Multimeter 1.Overview Handheld Optical multimeter is for the installation, operation and maintenance of a fiber optic network designed accurate, durable and portable instrumentation. It is
More informationPROLITE-50/51/52 OPTICAL REFLECTOMETER (OTDR)
PROLITE-50/51/52 OPTICAL REFLECTOMETER (OTDR) - 0 MI2119 - SAFETY NOTES Read the user s manual before using the equipment, mainly SAFETY RULES paragraph. The symbol on the equipment means SEE USER S MANUAL.
More informationEOS-6000 Series Optical A/B Switch User Manual DC Version
EOS-6000 Series Optical A/B Switch User Manual DC Version For more information on this and other products: Contact Sales at EMCORE 626-293-3400, or visit www.emcore.com. Table of Contents Table of Contents...2
More informationThunder Bolt Multi-Tester Operations Manual
Thunder Bolt Multi-Tester Operations Manual TABLE OF CONTENTS Thunder Bolt Multi-Tester Universal Features and Settings... 1 Thunder Bolt Application Operation... 2 Trace View Pane... 2 Cursor Marker
More informationmobilecam GM-GV3 mobilecam & Viewer Software User Guide
GM-GV3 & Viewer Software User Guide 1 Table of Contents Chapter 1 GM-GV3 Overview 1.1 Package contents. 1.2 GM-GV3 overview.. 1.3 peripheral connection diagram.. Chapter 2 Install the Program & Setup the.
More informationGaming Mouse V530. User Manual
Gaming Mouse V530 User Manual Introduction Thank you for purchasing the Viper V530 gaming mouse. This mouse is designed to perform using an Avago 4000 DPI optical sensor and to be customizable with 7 programmable
More informationCS260 Contractor Series OTDR
CS260 Contractor Series OTDR Quick Reference Guide www.aflglobal.com or (800) 321-5298, (603) 528-7780 Functional Keys KEY NAME KEY FUNCTION Power Press and hold (~1 second) to turn the CS260 on or off.
More informationOTR 500 OTDR USER S MANUAL
OTR 500 OTDR USER S MANUAL Avoid exposure. Laser radiation emitted from the aperture. This product conforms to CDRH standards for laser product Per 21 CFR 1040.10 & 1040.11 1 SECTION Table of Contents
More informationCONTENTS. Model no: NT-013
1 CONTENTS Model no: NT-013 1. Product Overview... 2 2. How This Product Works..... 2 3. Product Features... 5 4. Package Contents... 6 5. Safety Precautions......6 6. Identifying Parts and their Functions...
More informationUser s Manual. ASE-1019 ASE Light Source
ASE-1019 ASE Light Source ASE-1019 ASE Light Source User s Manual Triple Play Communications Document 3013800-701 250 East Drive, Suite F Rev 1.1 Melbourne, FL 32904 July 2015 1 Revision History Document
More informationUser manual Model: VIU-800 Brand:
User manual Model: VIU-800 Brand: - 1 - This manual s main purpose is to introduce the correct way of using the Voter Identification Unit / Electronic Voting Machine (hereinafter referred to as "the device").
More informationUser s Manual. BCP-8000 Data Collector. Ver
User s Manual BCP-8000 Data Collector Ver.1 2011.02 Contents 1. Introduction... 1 1.1. Features... 1 1.2. Unpack... 1 1.3. Overview... 2 2. Keypad... 3 2.1. Function Keys... 3 2.2. FN Key + Numeric Key...
More informationQuiX Startup Kit Quick Start Guide
QuiX Startup Kit Quick Start Guide Thank you for purchasing the QuiX Laser Scanner for your QNotes System. Since many of you will be replacing the older Videx credit card scanner with the QuiX Scanner,
More informationLaser Projection keypad
Laser Projection keypad User Manual Model:ELK010 FCC ID:2AEPXELK010 All other products are trademarks or registered trademarks of their respective companies. Please refer to host device instruction manual
More informationPM-100 SERIES. Operation Guide. Power Meter V
PM-100 SERIES Power Meter Operation Guide V5.27.16 Contents 1 Introduction...2 2 Warranty...2 3 Safety Information...3 4 Preparing for Operation...3 4.1 Unpacking the instrument...3 4.2 Discharged batteries...3
More informationThank you for purchasing our product which adopts excellent workmanship and exceptional reliability.
INTRODUCTION Thank you for purchasing our product which adopts excellent workmanship and exceptional reliability. Your telephone is designed to give you flexibility in use and high quality performance.
More informationCONTENTS CHAPTER I: BEFORE USE I. BEFORE USE
I. BEFORE USE Foreword 1. Features 2. Accessories 3. Product Safety Information 4. Illustrations and Functions II. FAST OPERATION 1. Startup 2. Shutdown 3. Lock 4. Reset 5. Pause 6. Music File Select 7.
More informationMobileCam. GM-GV3 MobileCam & Viewer Software User Guide
GM-GV3 MobileCam & Viewer Software User Guide 1 Table of Contents MobileCam Chapter 1 GM-GV3 MobileCam Overview 1.1 Package contents. 1.2 GM-GV3 overview.. 1.3 MobileCam peripheral connection diagram..
More informationSCT-MMA / SCT-SMA Fiber Optic Adapters
SCT-MMA / SCT-SMA Fiber Optic Adapters USER MANUAL ENGLISH i SAFETY WARNINGS Read First: Safety and Operational Information The international electrical symbols used on the instrument or in this manual
More informationKI Channel Optical CWDM Power Meter. User Manual. KI6503 series 48-Channel Optical DWDM Power Meter
User Manual KI6503 series 48-Channel Optical DWDM Power Meter Warranty: Information in this manual is given in good faith for the benefit of the user. It cannot be used as the basis for claims against
More informationFOCIS Flex - No Wireless Fiber Optic Connector Inspection System User Guide
Test & Inspection FOCIS Flex - No Wireless Fiber Optic Connector Inspection System User Guide www.aflglobal.com or (800) 321-5298, (603) 528-7780 Table of Contents Safety Information....3 How to View Device
More informationPM-212-MPO Pocket Optical Power Meter INSTRUCTION MANUAL
PM-212-MPO Pocket Optical Power Meter INSTRUCTION MANUAL Revision 1.2 is the registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective
More information1. PRECAUTIONS. Thank you for choosing RUIDE theodolite Disteo 23. Please read this manual carefully before use.
Thank you for choosing RUIDE theodolite Disteo 23. Please read this manual carefully before use. 1. PRECAUTIONS a. Do not collimate the objective lens directly to the sunlight without a filter. b. Do not
More informationPM-204A/B. Power Meter. Operation Guide
Power Meter Operation Guide Contents 1. Introduction...3 2. Warranty...3 3. Safety Information...3 4. Preparing for Operation...4 4.1. Unpacking the instrument...4 4.2. Discharged batteries...4 4.3. AC
More informationThe uscope Getting started
Introduction (fw 5.11) AES uscope Manual The uscope Getting started The uscope! A single channel, pocket-sized, digital storage oscilloscope that s small, quick, and powerful. Automotive presets get you
More informationAQ1200A/AQ1200B/AQ1200C/ AQ1200E/AQ1205A/AQ1205E/ AQ1205F OTDR Multi Field Tester
User s Manual AQ1200A/AQ1200B/AQ1200C/ AQ1200E/AQ1205A/AQ1205E/ AQ1205F OTDR Multi Field Tester 8th Edition Thank you for purchasing the AQ1200A/AQ1200B/AQ1200C/AQ1200E/AQ1205A/AQ1205E/AQ1205F OTDR (Optical
More informationUser Manual. Cobia Flex R/F English - v2016.5a
User Manual Cobia Flex R/F English - v2016.5a NOTICE RTI Electronics AB reserves the right to make changes to the Cobia Flex R/F and the information in this user manual without prior notice. RTI Electronics
More informationKI6501 Optical CWDM Power Meter. User Manual. KI6501 series Optical CWDM Power Meter
User Manual KI6501 series Optical CWDM Power Meter Warranty: Information in this manual is given in good faith for the benefit of the user. It cannot be used as the basis for claims against Kingfisher
More informationPOCKETALK[W] User Manual
POCKETALK[W] User Manual Contents Appearance 02 Specifications 04 Safety Instructions 05 Safety and Handling Instructions 05 Recycling 06 Certifications 06 Charging 07 Configuring System Language 07 Setting
More informationBluetooth Virtual Keyboard For Smartphone User Guide v1.7
Bluetooth Virtual Keyboard For Smartphone 2003 User Guide v1.7 Introduction... 3 GENERAL PRODUCT DESCRIPTION... 3 LASER SAFETY PRECAUTION... 3 DISCLAIMER... 4 TRADEMARKS... 4 Getting Started... 5 YOUR
More informationInstruction Manual RS-1660
Instruction Manual RS-1660 Transformer Turns Ratio Meter This unit passes the following tests: Safety Symbols EN 61010-1: 2010 EN 61010-2-030: 2010 CAT IV 50V Pollution Degree 2 EN 61326-1: 2013 (CISPR
More informationUniPRO Gbis. User Guide issue 2. UniPRO Gbis Iss 1. User Guide
UniPRO Gbis 123800 issue 2 UniPRO Gbis -0-123800 Iss 1 Copyright Notice The information contained in this document is the property of IDEAL INDUSTRIES Ltd. and is supplied without liability for errors
More informationOTEB-CO-P PRE-AMP EDFA INSTRUCTION MANUAL
OTEB-CO-P PRE-AMP EDFA INSTRUCTION MANUAL Phone: (209) 586-1022 (800) 545-1022 Fax: (209) 586-1026 E-Mail: salessupport@olsontech.com www.olsontech.com 025-000521 Rev. X1 10/01/2012 SAFETY WARNINGS LASER
More informationTable of Contents Confirming the camera location
Table of Contents 1. What is the SenseView PORTABLE...1 2. Safety precaution...2 3. Package...3 4. Configuration...4 5. After purchasing...6 (1)... Charging...6 (2)Remove LCD protective film...6 6. How
More informationWATCH MP4 PLAYER USER MANUAL. Ref.: WATCH04 BTH + WATCH04 BASIC FUNCTION PREPARATIONS BEFORE USE 1. KEY DEFINITION
WATCH MP4 PLAYER Ref.: WATCH04 BTH + WATCH04 USER MANUAL BASIC FUNCTION 1 Display: 1.5 inch capacitive touch TFT, 128x128 resolution 2 Audio Format: MP3, WMA, AAC, OGG, FLAC, APE 3 Voice record format:
More informationM200 Handheld OTDR User s Guide
WWW.EXFIBER.COM M200 Handheld OTDR User s Guide Test & Inspection Limited Warranty One Year Limited Warranty All Noyes products are warranted against defective material and workmanship for a period of
More informationVision Fitness TF20-TF40-T40 Frame with Classic / Elegant / Touch Console Service Manual
Vision Fitness TF20-TF40-T40 Frame with Classic / Elegant / Touch Console Service Manual 1 TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION 1.1 Serial Number Location - TF20 Frame.....3 1.2 Serial Number
More informationFOCIS Flex Inspection
Test & Inspection FOCIS Flex Inspection Fiber Optic Connector Inspection Solution User s Guide www.flglobal.com, +1 (800) 321-5298 or +1 (603) 528-7780 Table of Contents Safety Information.... 3 FOCIS
More informationLDM M LASER DISTANCE MEASURER
LDM120 120M LASER DISTANCE MEASURER INSTRUCTION MANUAL SAFETY Read the following safety instructions before attempting to operate this product. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.!
More informationHandheld Optical Power Meter. Model SSF-TKITP-400 OPTICAL POWER METER. Manual
Model SSF-TKITP-400 OPTICAL POWER METER Manual August 2016 Contents Chapter 1. Standard Configuration.....2 Chapter 2. Overview...........2 Chapter 3. Data Sheet.....3 Chapter 4. Function.........4 4.1
More informationTABLET PC. Quick Start Guide. Model: TVE100 I
TABLET PC Quick Start Guide Model: TVE100 I Safety Precautions 1. This production is suitable for use in non-tropic areas below 2,000 meters, and the mark in the nameplate indicates the product is suitable
More informationUser s Manual BeamPod User Manual
User s Manual BeamPod General Safety Information 1. Keep the device and packaging materials out of reach of infants and children. 2. Keep the power adapter and other contacts from water, Dry your hands
More informationTC-600 VDSL2 TESTER (VDSL2/DMM/TDR/OPM/VFL/CABLE TRACING)
TC-600 VDSL2 TESTER (VDSL2/DMM/TDR/OPM/VFL/CABLE TRACING) I. INTRODUCTION TC-600 VDSL2 tester specially designed for xdsl line test (xdsl include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc.) and maintenance.
More informationI. User Guide. 1. Structure. HD Lens. Speaker USB/TV port. 360 rotating clip Video/Confirm. Photo. OK/Menu. Audio. Reset. Up/Infrared HD 2 LCD.
Body-Cam User Manual PPBCM9 Warning: 1. Be careful not to use this product in strong magnetic fields, which may cause image interference or cause product fault. 2. Be careful not to direct sunlight for
More informationDVBus , and Multiplexer and demultiplexer assemblies for video channels USER MANUAL
DVBus 8050-16, 8050-24 and 8050-32 Multiplexer and demultiplexer assemblies for 16-32 video channels USER MANUAL 1. Description DVBus 8050 systems transmit 10-bit digitized video signals over one optical
More informationTable of Contents. 2 Changing Focus Modes (e) Freeze Image... 17
Table of Contents 1. What is LifeStyle CANDY?... 4 2. Safety Precautions... 5 3. What s in the Box?... 6 4. Physical Description... 6 5. Getting Started... 10 (a) Charging the Battery... 10 (b) Removing
More informationTablet PC. Android 5.1 User Manual
Tablet PC Android 5.1 User Manual Tablet of Contents Specifications. What s inside the box Tablet Parts Getting started... How to use TF card How to connect to PC Connection to Internet.. Camera. Trouble
More informationLifeLine Series. User Guide Px-100 Lifeline Paging Control Panel
Manual LifeLine Series User Guide Px-100 Lifeline Paging Control Panel The operation and functions described in this manual are available from Software Version Px100-001-01 onwards. 1 INTRODUCTION 1.1
More information2 Product Overview. 5 User Interface. 14 Logging Data. 17 Viewing Data. 19 Managing Data. 24 Device Settings. 26 Specifications.
TITAN S8 Portable Data Acquisition Logger PRODUCT USER GUIDE To view the full MadgeTech product line, visit our website at madgetech.com. TABLE OF CONTENTS 2 Product Overview 5 User Interface 14 Logging
More informationWarning! It will cause malfunction if the monitor is operating with unspecified power supply adaptor or incorrect power voltage. Do not expose this
User Manual / Installation Guide Model No. P150VR/P150VG Warning! It will cause malfunction if the monitor is operating with unspecified power supply adaptor or incorrect power voltage. Do not expose this
More informationPM-212-SI3 Pocket Optical Power Meter INSTRUCTION MANUAL
PM-212-SI3 Pocket Optical Power Meter INSTRUCTION MANUAL Revision 2.4 is the registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective
More informationUser s Manual. AQ6150/AQ6151 Optical Wavelength Meter IM AQ EN. 1st Edition
User s Manual AQ6150/AQ6151 Optical Wavelength Meter 1st Edition Notes Trademarks Revisions Thank you for purchasing the AQ6150/AQ6151 Optical Wavelength Meter. The AQ6150/ AQ6151 is a high-speed wavelength
More informationTable of Contents. 2 Changing Focus Modes (e) Freeze Image (f) Mirror View... 18
Table of Contents 1. What is LifeStyle CANDY GRIP?... 4 2. Safety Precautions... 5 3. What s in the Box?... 6 4. Physical Description... 7 5. Getting Started... 9 (a) Charging the Battery... 9 (b) Removing
More informationCertification Testing Quick Reference Guide
Keys Certification Testing Quick Reference Guide Key Name Key Function Power Press and hold (approx. 1 sec.) to turn the OTDR on or off VFL Menu ON 2Hz - Press and hold (approx. 2 sec.) LED will flash
More informationWolfee Presenter+ User Guide
Wolfee Presenter+ User Guide Welcome To the future of presentations! Wolfee Presenter+, a CES 2019 Innovation Awards Honoree *, gives you full control while speaking, making it extremely easy for you to
More informationSCT2000 and SCT1500 Structured Cable Testers
SCT2000 and SCT1500 Structured Cable Testers USER MANUAL ENGLISH 1 SAFETY WARNINGS Read First: Safety and Operational Information The international symbols used on the instrument or in this manual are
More informationCT-510. Multifunctional CCTV Tester. User Manual
CT-510 Multifunctional CCTV Tester User Manual Please read these instructions carefully & save this manual for future use Content 1 Safety information... 1 1.1 Precaution before using the tester... 1 1.2
More informationUSER MANUAL Video Particle Counter with built in Camera Model VPC300
USER MANUAL Video Particle Counter with built in Camera Model VPC300 Additional User Manual Translations available at www.extech.com Introduction Thank you for selecting the Extech Instruments Model VPC300
More informationpalmotdr User s Manual
www.telkolink.com palmotdr User s Manual Safety Terms Used in This Manual The WARNING sign denotes a hazard. It calls attention to a procedure, practice, or the like, which, if not correctly performed
More informationPrecise Fiber Couple Laser Light Source
Precise Fiber Couple Laser Light Source User Guide User Guide Document No. AEO-LD1480-0001 1. SAFTEY REQUIREMENT... 2 Precise Laser Light Source Page 1 / 15 1.1 User esponsibility...3 2. Description..
More informationFeatures. Warnings and Precautions READ BEFORE OPERATING EQUIPMENT SAVE THESE INSTRUCTIONS
SENTA Warnings and Precautions READ BEFORE OPERATING EQUIPMENT SAVE THESE INSTRUCTIONS To prevent damage to your radio or possible injury to you or others, read these safety precautions and instructions
More informationIMPORTANT SAFETY INSTRUCTIONS
CONTENTS Important safety instructions... Specified Conditions of Use... Error Code Table... Overview... Change batteries...4 Corner Pin...4 Belt Clip...4 Function Switch, Pythagoras, Measuring Reference...5
More informationLeica TS11 Quick Guide. Version 2.0 English
Leica TS11 Quick Guide Version 2.0 English TS11, Important Information about your Instrument 1 Important Information about your Instrument 2 Read and follow the User Manual on the accompanying DVD before
More informationContents. Important Safety Notice. Your dash cam Introduction What's in the box
Contents Important Safety Notice Your dash cam Introduction What's in the box Get started Install the dash cam Insert Micro SD card Turn on the dash cam Mode switch Video recording Video settings 6 6 Photo
More informationGLOSS METER OPERATION MANUAL
GLOSS METER OPERATION MANUAL 60 / 20 60 85 V1.0 Safety Instructions Attention: The instrument is a safe device. Before operating, please read the safety instructions and strictly comply with the following
More informationFX40/45 Series Manual D P RevA00 Page 1 of 25. FX40/45 Series Manual D P RevA00 Page 1 of 25
FX40/45 Series Manual D07-00-101P RevA00 Page 1 of 25 FX40/45 Series Manual D07-00-101P RevA00 Page 1 of 25 USER MANUAL FX40/45 Series Please direct all questions to your local VeEX Sales Office, Representative,
More informationDeviser Part No.: TC500-DL Deviser Instruments, Inc. All rights reserved.
TC500 Ethernet Cabling Certifier Operation Manual Version 1.13 Deviser Part No.: TC500-DL Deviser Instruments, Inc. All rights reserved. Warranty This instrument is guaranteed for a period of 2 years
More informationFTE-6000 Hand Held Tuneable Laser Source
FTE-6000 Hand Held Tuneable Laser Source USER S MANUAL Avoid Exposure Laser Radiation Emitted From The Aperture This product conforms to CDRH standards for laser product Per 21 CFR 1040.10 & 1040.11 Table
More informationCS Contractor Series Live PON OTDR
CS260-10 Contractor Series Live PON OTDR User Guide www.aflglobal.com or (800) 321-5298, (603) 528-7780 Table of Contents Safety Information... 4 General Information... 5 Contacting Customer Service...5
More informationFusion HD. Quick Start Guide. Nixeus Technology, Inc. Version 1.1
Fusion HD Quick Start Guide Version 1.1 About This Guide This Quick Start Guide gives you the information for you to setup your unit and enjoy viewing your multimedia files. The user manual will describe
More informationOPM-50 Optical Power Meter User s Manual
OPM-50 Optical Power Meter User s Manual Shineway Technologies, Inc. All rights reserved. 0BSafety Instructions The WARNING sign denotes a hazard. It calls attention to a procedure, practice, or the like,
More informationOTEB-CO-B Series. Booster EDFA OPERATING MANUAL
OTEB-CO-B Series Booster EDFA OPERATING MANUAL 24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000533 Rev X6 E-Mail: sales@olsontech.com 27 Apr 2010 TABLE OF CONTENTS
More informationPROGRAMMING AND INSTALLATION MANUAL
PROGRAMMING AND INSTALLATION MANUAL Keypad LCD-S (software version 3.10) CA-10 plus GDAŃSK ca10plci_s_e 09/03 WARNING Due to safety reasons, alarm system should be installed by qualified personnel only.
More information