Ascom IPBL1 software version 6.1.2

Transcription

1 Ascom IPBL1 software version RELEASE NOTES IPBL1 Software version

2 RELEASE NOTES Ascom IPBL1 version GENERAL Build date: Software name: IPBL_firm_v6p1p2.bin Software version: Bootcode version: Purpose of the release This is a release for the Ascom IP-DECT access point that adds new functions and solves a number of non-conformities. RELEASE NOTES IPBL1 Software version

3 MAJOR NEW FUNCTIONALITY Support for Audiocode s gateway towards MS LYNC IP-DECT can now be used in Microsoft Lync systems in combination with a gateway from Audiocodes. Backup with IIS and TFTP When using IIS as an update server it is possible for IP-DECT devices to write files to IIS, i.e. upload configuration. Support of http digest authentication algorithm "md5-sess" is included, which is needed to work with newer IIS versions. Easy registration of anonymous devices Possible to manually add IPEI's to the Anonymous list and automatically register handsets, new/factory reset. Support for local Russian phone book The local phone book supports searching for other users based on UTF-8. 3-party conference with Innovaphone PBX Support for ad hoc conference using Innovaphone PBX conferencing unit. LAN redundancy LAN redundancy for IPBL using the Rapid Spanning Tree protocol (RSTP). RELEASE NOTES IPBL1 Software version

4 CHANGES of changes relative to version: IMPROVEMENTS Change requests CR 16672, Automatic update of clock in portables When time changes like daylight savings or time zone changes, the time in the handsets will be updated within 3 minutes. CR Support for presence systems It it now possible to connect IP-DECT to a presence system like Vision 80/20 via ICP protocol. See installation and operation manual for details. CR Include redundant solution with Cisco SRST solution on IVT certification This is now included. CR Ports used for internal call signaling It was difficult to place a firewall between a radio and the master since the communication between them used dynamic ports. This is now solved by using static port numbers for internal communication, see Installation and operations manual for more details. CR Registration with Innovaphone master/slave PBXs In a multi Innovaphone PBX setup it was not possible to use the "physical location" feature to get access to local objects in the PBX. This is now solved Other improvements Support AES in Kerberos (AD) The IP-DECT Kerberos service now supports the AES encryption type to work well in a trust relationship with a Windows Server 2008 R2 Active Directory. Create an SNMP critical active alarm if Update/Backup service failed All failures of the backup/update service now generate a critical alarm. Time zone drop down list in radio Config (web GUI) It is no longer necessary to manually configure the Format string in radio config, Services added as a new left menu The General menu contained many tabs. Now a new configuration menu called services has been added. Use ctrl+f5 or restart browser to make new menu appear. RELEASE NOTES IPBL1 Software version

5 1.2 CORRECTIONS Corrected non conformity reports (NCR) NCR Session timer negotiation failure at genband interop Interoperability issue with Genband C20, where call could be dropped after one session timer interval. Genband session timer issue fixed.. NCR Portable auto answer It is possible for the PBX to include an "auto-answer" in the INVITE to make the portable automatically go off hook but it only worked for Innovaphone PBXs. Fixed so that auto answer feature is accepted regardless of PBX brand. NCR RFP description not visible in service report Sometimes the RFP description was not included in the service report. Fixed so that RFP descriptions >46 chars appears in service report NCR Transfer drops in SWYX systems The timer started after receiving 100 Trying in an outgoing Invite transaction is only 5 seconds. This causes unattended transfers to be dropped in some cases where it takes more than 5 seconds to get a response. Problem in SWYX systems when a dect handset is unattended transferred to a destination where it takes a long time to receive a ringing or progress response has been solved NCR Unable to access device after changing DHCP setting In a system without DHCP server the connection with the device was lost when changing DHCP setting from automatic to disabled, i.e. when switching from to a defined fixed address.. When device is in DHCP automatic mode and DHCP setting is changed to disabled the change takes effect after a reset (reset required is displayed in GUI). RELEASE NOTES IPBL1 Software version

6 NCR Multicast stopped working on some units after rebooting the IPDECT system Handset stopped receiving Multicast message after reboot. This is now solved. NCR Watchdog reset Master restart. This is now fixed. NCR Send pause with inband DTMF This did not work in IPBS after This is now solved. NCR Faulty DNS behaviour Faulty behavior when using dynamic load balancing. This is now solved and when using dynamic load balancing the correct (highest priority) SIP proxy is now selected Other corrections CUCM:PP got "PBX out of service" using SIPS/SRTP (Remote server certificate mismatch) The Remote server Certificate Name is now properly used when verifying certificate. Manual and scheduled reference resynchronization If an air sync master is configured with a reference and the sync is lost it is possible to either do a manual resynchronization or to have it done automatically at a specified time. In some cases this did not work. This is now fixed so the air sync master re-synchronization is triggered correctly. XML parsing error is shown if delete contacts from LDAP>Expert page XML parsing error or "Not Found" was shown if many phonebook contacts were deleted on the LDAP>Expert page. This is now corrected and it is possible to delete all displayed phonebook entries at once on the LDAP-Expert page. RELEASE NOTES IPBL1 Software version

7 RELEASE NOTES IPBL1 Software version

8 LIMITATIONS KNOWN ISSUES LIMITATIONS Enhanced DECT security With the enhanced DECT security function enabled a scratching sound can happen in rare occasions. Due to this the feature shall not be implemented at customer sites without first having contacted the Product Manager for approval. Limitation for shared phone There can be a maximum of 500 shared phones on a master. If the number of radios connected to the PARI master exceed 200 it shall not have and shared phones, they must be placed on a different master RELEASE NOTES IPBL1 Software version

9 COMPATIBILITY INFO IPBL1 with software version is fully compatible with other IP-DECT products (IPBS1, IPBS2) running version However the binary files loaded to the different products are different. Compatible with following versions of IPBL1 IPBL1-AA IPBL1-AB RELEASE NOTES IPBL1 Software version

10 OLDER CHANGES of changes between and IMPROVEMENTS Other improvements 1.4 CORRECTIONS Corrected non conformity reports (NCR) NCR Master restarts. This bug is now fixed. NCR Master restarts. Fixed problem with very long A-name (>128 chars) received from PBX. NCR Master restarts. Solved a timing issue in the SIP protocol stack when clearing a call that could lead to a Dect Master watchdog restart. NCR Master restarts. Problem with data traffic to handsets during high load at startup could cause a master restart. RELEASE NOTES IPBL1 Software version

11 RELEASE NOTES IPBL1 Software version

12 OLDER CHANGES of changes between and IMPROVEMENTS Other improvements Login/logout AD replication CORRECTIONS Standby master failed to connect When the standby master was active it sometimes failed to connect to the mobility master.this is now fixed. Corrected non conformity reports (NCR) NCR Calls with no way speech. A bug in a situation where a media negotiation occurred after handover and before answering an incoming call is now fixed. NCR Sometimes there were missing users in exported file. Has now been fixed. NCR Decreasing OIDs prevent SNMP manager to walk the MIB. Has now been fixed. RELEASE NOTES IPBL1 Software version

13 OLDER CHANGES of changes between version and IMPROVEMENTS Other improvements Login/logout AD replication Login/logout error of portable when AD replication is active has been solved. Performance graph An issue with that the CPU-R performance graph did not display correct information has been fixed. Brief sound from other call at on hold A problem for MX-One systems where extension on hold could hear brief sound from the other call has been fixed. CORRECTIONS Corrected non conformity reports (NCR) NCR When the customer is using twinning the MWI message did not always turn off when checked from the deskphone A bug in the parsing of SIP message summary has been fixed and the MWI now turn of. This relevant for the Shoretel PBX NCR When an IP-DECT handset is transferred to a destination that after ringing has started rejects the call, the IP-DECT handset is disconnected. The SIP call to the transferor is still there. A problem with blind transfer where a DECT has been solved. This relevant for the SWYX PBX. NCR Shoretel transfer to international (E.164) number prefixed with access code fails. A problem when making external calls which required an access code has been solved. RELEASE NOTES IPBL1 Software version

14 This relevant for the Shoretel PBX. NCR & Call Forward No Reply (CFNR) cause hanging call instances. A problem when handling call forwarding at no reply could lead to that the calling party could become busy indefinitely has been solved. NCR Browsing to the Kerberos GUI page caused a restart of the IPBL. A problem when making external calls which required an access code has been solved. NCR No handset display update after pressing the R-key. The problem has been fixed and if the R-key is pressed during a call it is now displayed in the portable. NCR & The IP-DECT master restarts because of low memory. The memory leakage was caused by certain SIP NOTIFY messages. This problem has now been solved. The problem is only relevant for the Avaya/Nortel (CS1K) PBX. RELEASE NOTES IPBL1 Software version

15 NCR The user is unable to make/receive calls because of a hanging calls. The problem where call replacement could result in hanging calls has now been solved. NCR Attended and unattended call transfer fails. Fixed transfer issues. Avaya IP Office only. NCR Not possible to register a redundant CUCM with SIPS. Possibility to disable certificate subject check for SIP/TLS connections. For CUCM only. NCR SIP registration problem with CUCM. Solved problem where turning off or logging out a handset could lead to continued PBX registration. For CUCM only. NCR Memory runs out and IP-DECT HW restarts. Memory leak fixed. PBX independent RELEASE NOTES IPBL1 Software version

16 NCR The IP-DECT Master restarts. An issue with call transfer that caused the master to restart has now been solved. NCR The DECT radio restarts. An issue with call transfer that caused the radio to restart has now been solved. NCR Long dialling tone before alerting tone. The problem is now solved. Alcatel OXE and Mitel NCR Watchdog restart. Fixed master restart. PBX independent. NCR Unexpected watchdog restart. Fixed radio restart. PBX independent. RELEASE NOTES IPBL1 Software version

17 NCR Simultaneous watchdog restart on multiple IP- DECT slaves. Fixed radio restart. PBX independent. RELEASE NOTES IPBL1 Software version

18 OLDER CHANGES of changes introduced in version relative to version: IMPROVEMENTS Change Requests CR Contact header uses both private and public IP address SIP interoperability problem with Acme Packet SBC solved towards the Arcstel/Advoco NetPBX IP centrex solution. Other improvements Upgrading issues Upgrading IPBS2 master in a multi-master system to 5.1.X caused users to be deleted. The collateral damages caused by change of mac-alias for IPBS2 when upgrading to (see technical news 74:12) has been solved. CORRECTIONS Corrected non conformity reports (NCR) NCR It is only possible registering one handset with 13-digits in the extension number Problem using more than 12 digit extension numbers in licensed CUCM systems has been solved. This affects the Cisco Unified Communications Manager with license Extended SIP Line Support. NCR Watchdog Reset every sec Possible restart when using fixed IP address and Service discovery is enabled has been solved Affects all systems where fixed IP address and UNITE service discovery is used. RELEASE NOTES IPBL1 Software version

19 NCR Not possible to view Air Sync Overview if IPBS's have æøå in names Device description in sync overview contained additional garbage characters which in some cases can cause XML error on sync overview page. NCR Not possible to put an IP-DECT handset on hold SIP interoperability problem with Genband SBC solved This issue is valid for GENBAND S3 SBC and C20/A2 call server, former Nortel CS2k (IP Centrex). NCR Transfer a call before answer not possible SIP interoperability problem with Alcatel/Lucent OXE solved. This issue is valid for Alcatel/Lucent OXE. NCR and Not possible to login/logout users Problem with login/logout users when not using local R-key handling is now solved. NCR One way speech in IPBL systems. A specific connection scenario caused one-way speech. This issue is now solved. RELEASE NOTES IPBL1 Software version

20 NCR Error message when using IP-DECT MIB Removed illegal underscore characters from enum values in the SNMP MIB definition. RELEASE NOTES IPBL1 Software version

21 OLDER CHANGES of changes introduced in version relative to version: MAJOR NEW FUNCTIONALITY Support for enhanced functionality with Cisco Unified Communications Manager systems IP-DECT now supports enhanced functionality in Cisco UCM systems version and later. The new features are: Music on hold Ad Hoc Conferencing Meet-Me Conferencing Call Back Call Pickup Call Park Abbreviated Dialling This is a licensed functionality and a license key need to be installed on the IP-DECT devices. This functionality is limited to be used in Europe only according to the Cisco agreement. The license is based on the IP-DECT device serial number and each IP-DECT device in the system will need a license. The applicable licenses are: IPBS1-L01 for the IPBS1 IPBS2-L01 for the IPBS2 IPBL1-L01 for the IPBL License handling and software update via the Device Manager The IP-DECT system now supports license handling and software download to IP-DECT devices via the Device Manager in the same way as it is done for the DECT handsets. Missed call info when in call IP-DECT now supports that the number and name are transfer to the call list when the user gets a call when already being in a call. Remote handset hook control from the Innovaphone PBX The IP-DECT system now supports remote call control (handset hook on /off) from the Innovaphone PBX. Messaging in Russian IP-DECT now supports messaging in Russian via Unite Waveforms The IP-DECT Access Point supports transfer of waveforms to the DECT handsets. IMPROVEMENTS Change Requests CR increase number of digits for passwords in IP-DECT Maximum user password length is now 23 characters instead of 15 in order to support the Telia Centrex solution that have a security policy that stipulates that a login password of at least 16 digits is required. Other improvements Easy registration Easy registration is now allowed also when "With System AC" mode is enabled Call hold problems with the CUCM RELEASE NOTES IPBL1 Software version

22 A problem with inter-cluster hold/retrieve in CUCM for SRTP calls has been solved. Memory leakage IPv6 multicast packets to UDP/TCP ports that is not used caused memory leaks. This has now been corrected. IPBS2 now has a new netbios name To find a IPBS2 device with netbios name use IPBS2-XX-XX-XX instead if IPBS-XX-XX-XX. The default name for update server script is also changed i.e. update-ipbs2.htm instead of update-ipbs.htm. If upgrading IPBS2 devices from 5.0.X they will get new RFPIs because of the name change. (It is possible to manually modify the config to avoid this) Additional Subject Alternative Names (SAN) can be added to the device certificate CORRECTIONS Corrected non conformity reports (NCR) NCR Problem to view GUI page RFP overview Not possible to view GUI page RFP overview ( browser shows XML error).. GUI problem when using special characters, e.g. åäö, in RFP descriptions has been corrected. RELEASE NOTES IPBL1 Software version

23 NCR Airsync overview not visible in the GUI GUI page Airsync overview is blank. The GUI problem when a device name contained a single quote character has been corrected NCR Incoming calls are displayed as redirected For incoming call the handset displays redirected call from the caller. The problem with redirection indication in display although no redirection has occurred is now solved. The problem is relevant for Avaya Session Manager. NCR Absense/diversion problem with Ascom IP-DECT Absence/diversion information not always updated in the DECT handset. The problem with external idle display control using Call-Info is now solved. The problem is relevant for Aastra MX-One. NCR Master RFP reboots Pari Master Restarts. The restart was caused by memory leakage when using IP-DECT central phonebook. This problem is now solved. NCR SIP interoperability problems with the Swyx PBX Swyx features not working. SIP interoperability problem, where a REFER with replaces information incorrectly resulted in an INVITE with two identical Replaces headers is now solved. The problem is relevant for the Swyx PBX. RELEASE NOTES IPBL1 Software version

24 NCR XML error on the Kerberos web page Configuring Kerberos settings generated a XML error in IP-DECT GUI. XML error when realm and user is created at the same time is now solved. NCR Problems when using special characters When using åäö in search (Configuration-Users-Users) the result is a XML-error in browser. User administration page now support search for names with special characters, e.g. åäö. NCR MWI not working MWI not working for some systems. Improved handling of SIP record route to solve MWI problem. The problem is relevant for Avaya Session Manager. NCR and Deregistration of handsets When trying to log in a shared phone the user is deleted and no longer visible in the user GUI of IP-DECT. Problem fixed with users being deleted when logging in a shared phone. NCR PP fail to register on second Master for large system When backup master is activated portables show PBX out of service. Power cycle of portable resolves the issue. PBX communication will not fail when switching to backup master. The problem is only relevant for installation with the Mitel PBX RELEASE NOTES IPBL1 Software version

25 NCR and AD replication doesn t work Using AD replication with caused IPEIs for all users to be deleted. AD replication did not work in and caused IPEIs to be deleted. NCR MWI incorrectly cleared MWI incorrectly cleared when portable is switched on or logged in shared phone. The problem with activating MWI at startup/login of handset has been corrected. The problem is relevant for the Cisco UCM. NCR MWI problem towards the CS1K MWI incorrectly removed from portable. Interoperability problem with Nortel CS1000 regarding MWI. Problem is relevant for the CS1K PBX. Solution This problem is now solved NCR 19549, 19496, Incoming external calls fails Different SIP signalling compared with previous releases of IP-DECT Instead of using 100 Session Progress 183 Session Progress was sent from the IP-DECT system. The interworking of SIP 183 Session Progress and Q.931 Call Proceeding has been removed. Caused problems with several PBX s where Ascom have good interoperability. Solution This problem is now solved RELEASE NOTES IPBL1 Software version

26 NCR Transfer to PSTN doesn't work. Transfer to PSTN failes. SIP message grew too large after digest challenge causing this problem. Transfer fails when using Avaya Session Manager (SIP). Solution This problem is now solved NCR Pari master reboots Pari master keeps rebooting and coming back on line, users keep reporting master out of service, then it's ok and then crashes again. Problem with decoding large History-Info headers causing the master to restart Master restarts when using Avaya Session Manager (SIP). Solution This problem is now solved RELEASE NOTES IPBL1 Software version