E-link China Technology Co., Ltd.

Transcription

1 IP Cameras over Coax Solution E-link IP Ethernet over Coax (EOC) network extender is an IP Video Transmission Solution. LNK-EOC Series is the high-performance Ethernet-over-Coaxial extender that converts between twisted pair (UTP) and coaxial cable for every kind of IP Ethernet application. It offers the absolutely fastest data transmission speed over existing coaxial cable without the need of rewiring. On the UTP side, the LNK-EOC uses a modular EIA / TIA 568 RJ-45 connector that supports CAT-5/5e or above wiring with the distance up to 100 meters (328 feet). On the coaxial cable side, the LNK-EOC utilizes a BNC connector that supports 50ohm or 75ohm coaxial cable with the distance up to 1000m. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable for any type of IP network device such as IP camera, wireless access point, NVR and digital signage. High Transmission Speed & PoE Support Physical Port transmission rate up to 200Mbps. Valid data flowing rate up to 80Mbps Transmission distance up to 1000M PoE compliant to IEEE 802.3af (15.4W) delivered to IP camera Supply 10/100Mbps 1-Ch Ethernet interface and 1~8Ch BNC interface High compatibility Support QAM 16/64/256/1024, DQPSK,DBPSK and ROBO modulation technology. Support conformability transmission QoS, Multicast and IGMP. High security Adopt 128bits AES data encryption and Key management. Adopt Peer-to-peer network framework Plug and Play (without any setting) Application: 1 sales@e-linkchina.com

2 Product: 1-Ch 10/100Base-TX + 1-Ch BNC Ethernet over Coaxial (EOC) Extender Model: LNK-EOC100 Series E-link 1-Ch Ethernet over Coax (EOC) converter system transmits Ethernet of IP cameras over coax and can quickly turn any ordinary coaxial cable into a high speed network communication path. The system can operate for distances of up to 1000 meters, extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EOC converter system consists of a pair transceiver, which can be quick installation, no need to configure. Simply connect network devices to the network ports of the transceiver along with existing cabling, eliminating the time, expense and risk of laying new Cat 5 network cable. To let you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable. The EOC converter system is ideal for retrofitting existing installations. Converts Ethernet UTP to transmit network data and PoE over standard coax cable PoE compliant to IEEE 802.3af (15.4W) delivered to IP camera Converts existing analog CCTV system over coaxial cable to retrofit analog CCTV installations into IP Digital systems. Avoids rewiring and expense of traditional Ethernet UTP cable. Transmits10/100Base-T up to distances of 1000 meters Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras. Fully transparent to Ethernet networks and higher layer protocols No IP or MAC address configuration and other networking setup required 2 sales@e-linkchina.com

3 Application Technical Indexes Model Standards Connector Cabling Data rate PoE Power Power Consumption Performance Specification Distance Power Tem. Operatig Humidity Safety Warranty LNK-EOC100 IEEE802.3 IEEE802.3u IEEE802.3x IEEE 802.3af 1XRJ45,1xBNC Coaxial cable 10/100Mpbs IEEE 802.3af (15.4W) delivered to IP camera Less than 3W Store-forward 1000m(No POE), 200~300m(with POE) DC (storage) 0-50 (operating) 10%-90%,Non-condensing CE/FCC/RoHs One year 3 sales@e-linkchina.com

4 10/100Base-TX (PoE) Ethernet Over Coax Extenders with PoC Model: LNK-EOC100P Series E-link 1-Ch Ethernet over Coax (EOC) converter system transmits Ethernet of IP cameras over coax and can quickly turn any ordinary coaxial cable into a high speed network communication path. The system can operate for distances of up to 300 meters with POE, extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EOC converter system consists of a pair transceiver, which can be quick installation, no need to configure. Simply connect network devices to the network ports of the transceiver along with existing cabling, eliminating the time, expense and risk of laying new Cat 5 network cable. To let you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable. The EOC converter system is ideal for retrofitting existing installations. 4 sales@e-linkchina.com

5 Converts Ethernet UTP to transmit network data and PoE over standard coax cable PoE compliant to IEEE 802.3af (15.4W) delivered to IP camera Converts existing analog CCTV system over coaxial cable to retrofit analog CCTV installations into IP Digital systems. Avoids rewiring and expense of traditional Ethernet UTP cable. Transmits10/100Base-T up to distances of 300 meters with POE Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras. Fully transparent to Ethernet networks and higher layer protocols No IP or MAC address configuration and other networking setup required Application Technical Indexes Model Standards Connector Cabling Data rate PoE Power Power Consumption Performance Specification Distance Power Tem. Operatig Humidity Safety Warranty LNK-EOC100P IEEE802.3 IEEE802.3u IEEE802.3x IEEE 802.3af 1XRJ45,1xBNC Coaxial cable 10/100Mpbs IEEE 802.3af (15.4W) delivered to IP camera Less than 3W Store-forward 200m(with POE) 48V DC (storage) 0-50 (operating) 10%-90%,Non-condensing CE/FCC/RoHs One year 5 sales@e-linkchina.com

6 Product: 1-Ch 10/100Base-TX + 4-Ch BNC Ethernet over Coaxial (EOC) Extender Model: LNK-EOC400 Series E-link 4-Ch Ethernet over Coax (EOC) converter system transmits Ethernet of IP cameras over coax and can quickly turn any ordinary coaxial cable into a high speed network communication path. The system can operate for distances of up to 1000 meters, extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EOC converter system consists of a pair transceiver, which can be quick installation, no need to configure. Simply connect network devices to the network ports of the transceiver along with existing cabling, eliminating the time, expense and risk of laying new Cat 5 network cable. To let you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable. The EOC converter system is ideal for retrofitting existing installations. Converts Ethernet UTP to transmit network data and PoE over standard coax cable Converts existing analog CCTV system over coaxial cable to retrofit analog CCTV installations into IP Digital systems. Avoids rewiring and expense of traditional Ethernet UTP cable. Transmits10/100Base-T up to distances of 1000 meters Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras. Fully transparent to Ethernet networks and higher layer protocols No IP or MAC address configuration and other networking setup required 6 sales@e-linkchina.com

7 Application Technical Indexes Model Standards Connector Cabling Data rate Power Consumption Performance Specification Distance Power Tem. Operating Humidity Safety Warranty LNK-EOC400 IEEE802.3 IEEE802.3af IEEE802.3u IEEE802.3x 1XRJ45,4xBNC Coaxial cable 10/100Mpbs Less than 3W Store-forward 10Mbps, 1000m/100Mbps, 300m DC (storage) o -50 (operating) 10%-90%,Non-condensing CE/FCC/RoHs One year 7 sales@e-linkchina.com

8 Product: 1-Ch 10/100Base-TX + 8-Ch BNC Ethernet over Coaxial (EOC) Extender Model: LNK-EOC800 Series E-link 8-Ch Ethernet over Coax (EOC) converter system transmits Ethernet of IP cameras over coax and can quickly turn any ordinary coaxial cable into a high speed network communication path. The system can operate for distances of up to 1000 meters, extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The EOC converter system consists of a pair transceiver, which can be quick installation, no need to configure. Simply connect network devices to the network ports of the transceiver along with existing cabling, eliminating the time, expense and risk of laying new Cat 5 network cable. To let you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable. The EOC converter system is ideal for retrofitting existing installations. Converts Ethernet UTP to transmit network data and PoE over standard coax cable Converts existing analog CCTV system over coaxial cable to retrofit analog CCTV installations into IP Digital systems. Avoids rewiring and expense of traditional Ethernet UTP cable. Transmits10/100Base-T up to distances of 1000 meters Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras. Fully transparent to Ethernet networks and higher layer protocols No IP or MAC address configuration and other networking setup required 8 sales@e-linkchina.com

9 Application Technical Indexes Model Standards Connector Cabling Data rate Power Consumption Performance Specification Distance Power Tem. Operatig Humidity Safety Warranty LNK-EOC800 IEEE802.3 IEEE802.3af IEEE802.3u IEEE802.3x 1XRJ45, 8xBNC Coaxial cable 10/100Mpbs Less than 3W Store-forward 10Mbps, 1000m/100Mbps, 300m DC (storage) o -50 (operating) 10%-90%,Non-condensing CE/FCC/RoHs One year 9 sales@e-linkchina.com