IP PHONE 2001 OVERVIEW

Transcription

1 IP PHONE 2001 The Nortel IP Phone 2001 is an entry level, single-line desktop IP telephone designed specifically for public areas such as lobbies, cafeterias, hallways, and break rooms. It is also ideal for low call traffic locations such as school classrooms and hotel rooms. Standard features include: 802.3af Power over Ethernet, a 2x24 character display, on-hook dialing, listen mode speakerphone, Message Waiting Indication, fixed keys, navigation and soft keys. Basic telephony features such as hold, goodbye, volume up/down, services and messaging improves interpersonal communications Small footprint is ideally suited for wall mounting or locations with limited desktop space Single line/single programmable memory button provides direct access to any department or person Fully bit-mapped 2x24 character display is easy to read and accommodates global languages 10/100BASE-T Power over Ethernet via the IEEE 802.3af specification increases reliability by providing direct inline power from the Data Switching Equipment TECHNICAL SPECIFICATIONS: Platform compatibility Communication Server 1000 Meridian 1 Business Communications Manager Survivable Remote Gateway Color: Charcoal and EtherGray Power Supply: AC adapter or Power over LAN AC Power: Localized power adapter delivering 16V AC at 500 ma Power over LAN: 802.3af (PoE Classification 2), Cisco pre-standard, or PowerDsine mid-span Headset Support: No Security: Private key challenge response Mounting: Desktop or wall Internet Telephone Switch: No Ports: 1 Data rates: 10/100Mbs autosensing Standards: IEEE 802.3af, 802.1p/q MAC Address: Auto-learning, auto-aging at 700 seconds

2 IP PHONE 2002 The Nortel IP Phone 2002 is a standards-based IP Phone that connects directly to the Local Area Network (LAN) via RJ-45 connector. Supported on both enterprise and carrier platforms, the display-based IP Phone 2002 is ideally suited for moderate call volume users, such as office professionals and technical specialists. Basic and advanced telephony features, audio control center and selectable ring tones improve interpersonal communications Softkeys control display-based features for improved productivity Reduced enterprise installation costs by only requiring a single Category 5 cable drop to the desktop for telephone and co-located PC. Direct inline power support via the IEEE 802.3af standard delivers increased reliability and cost-effectiveness TECHNICAL SPECIFICATIONS: Platform compatibility Communication Server 1000 Meridian 1 Business Communications Manager Survivable Remote Gateway Multimedia Communication Server Multimedia Communication Server 5200 Communication Server Communication Server 2100 Color: Charcoal and EtherGray Power Supply: AC adapter or Power over LAN AC Power: localized power adapter delivering 16V AC at 500 ma Power over LAN: 802.3af (PoE Classification 2), Cisco pre-standard, or PowerDsine mid-span Headset Support: Built-in amplifier for direct headset connection Security: Private key challenge response Mounting: Desktop or wall Internet Telephone Switch: Integrated Ports: 2 Data rates: 10/100Mbs autosensing Standards: IEEE 802.3af, 802.1p/Q MAC Address: Auto-learning, auto-aging at 700 seconds

3 IP PHONE 2004 The Nortel IP Phone 2004 delivers traditional business communications in a network controlled by a Nortel Business Communications Manager, Meridian 1, Communication Server 1000, Communication Server 1000M or Multimedia Communications Server The IP Phone 2004 is directly connected to the LAN via a 10/100 BaseT Ethernet connection, offering simplified management and reducing the time and cost associated with moves, adds and changes. Integrated Switched Ethernet connection prioritizes voice traffic to ensure high quality voice and reduce wiring and cable requirements. Power over Ethernet delivers power from the Data Switching Equipment over Ethernet cabling via the IEEE 802.3af specification. DHCP-compatible to simplify network administration by providing centralized, automated IP address management. Microsoft TAPI-compliant interface operates with CallPilot and Personal Call Manager providing onscreen displays of call logs, directories etc. Standards based solution that allows automatic firmware upgrades as standards as features evolve. TECHNICAL SPECIFICATIONS: Platform Compatibility Communication Server 1000 Meridian 1 Business Communications Manager Survivable Remote Gateway Multimedia Communication Server Multimedia Communication Server 5200 Communication Server Communication Server 2100 Color: Charcoal and EtherGray Mounting: Desktop or wall Power Supply: AC adapter or Power over LAN AC Power: localized power adapter delivering 16V AC at 500 ma Power over LAN: 802.3af (PoE Classification 2), Cisco pre-standard, or PowerDsine mid-span Headset Support: Built-in amplifier for direct headset connection Security: Private key challenge response Internet Telephone Switch: Integrated Ports: 2 Data rates: 10/100Mbs autosensing Standards: IEEE 802.3af, 802.1p/q

4 IP PHONE 2007 IP Phone 2007 incorporates a 5.7 (12.7cm x 17.8cm) color touch-screen, bringing multimedia presentation support to the desktop IP Phone. Virtual Network Computing technology optimizes content pushed from external application servers in advanced text or graphical format. A USB port supports standard USB mouse and keyboards for simple point-n-click access and navigation. Business telephony features are robust as delivered from Nortel Communication Servers. Enables both prepackaged and customized content from external application servers, including advanced text, still-frame, streaming video and other web-centric/data-centric applications, to be optimally presented on its display. Delivers flexible and efficient access in navigation of menus and applications and increased productivity in data entry with its support of an integrated touch-screen, an on-screen popup keyboard and a USB port which supports standard USB mice, keyboards and hubs. Up to twelve programmable line/feature keys and up to 650 business telephony features delivering robust voice communications support (number of features are Nortel Communication Server dependent). Tools softkey offering single click access to administration menus including phone configuration, network and local diagnostic menus and user preferences. Integrated RJ-8 port enabling quick and direct connection of either amplified or un-amplified headsets. TECHNICAL SPECIFICATIONS: Platform Compatibility Business Communications Manager 200 and 400 Servers with Release 3.7 and higher. Communication Server 1000 Release 3.0; Communication Server 1000 Release 4.0 and higher. Multimedia Communication Server 5100 Release 3.5. Display: Integrated 5.7 (12.7cm x 17.8cm) QVGA, Color Super Twisted Nematic (CSTN), 240x320 pixel, fully bitmapped, backlit (Cold Cathode Florescent Tube), touch-screen Liquid Crystal Display. Up to 16-bit color definition with dither suitable for streaming video. Supports IEEE 802.3af power standard and pre-standard Nortel and Cisco proprietary power schemes. Local power via a Universal 100/240VAC, 50/60Hz Power Adapter delivering 0.52A Max (regional power cords are requiredl and must be specified separately). USB port delivering maximum 500mA power output. Standard USB mouse, keyboards and powered USB hubs supported. Data Rates: 10/100Mbps Auto Sensing Manually configurable for 10 and 100Mbps full duplex for non auto-sensing switches

5 IP PHONE KEY EXPANSION MODULE Up to 48 additional line/programmable feature keys extending off either IP Phone 2004 or 2002* Supports "shift" functionality on selected Nortel Communication Servers, enabling a single IP Phone Key Expansion Module to access up to a total of 48 keys (2 pages x 24) in space limited environments Direct powering from IP Phone 2004 or standalone power supply is not required Optional IP Phone Key Expansion Module wall mount kit for deployment on either IP Phone 2004 or 2002 Supported on all phases of IP Phone 2004 and 2002 (prior releases to phase II of the IP Phones require firmware version B63 or later) TECHNICAL SPECIFICATIONS Platform Compatibility Nortel Communication Server 1000 Release 4.0 and later (requires IP Line 4.0 functionality or later) Nortel Communication Server 2100 (supported with Release SE07) Nortel IP Phones IP Phones 2004 and 2002 (firmware update to version B63 needed for pre-phase 2 phones) Nortel IP Phone Key Expansion Module (KEM) 2 columns of 12 soft labeled keys (total 24 per unit) 2 Key Expansion Modules maximum per IP Phone 2004 or 2002 (up to total of 48 additional appearances*) 10 character display per key label Connects to IP Phone 2004 or 2002 via Accessory Equipment Module (AEM) interface on IP Phone (KEM is right- side mounted) Adjustable contrast for different viewing angles including wall mount Self-adjustable tilt-stand IP Phone KEM Colors: Charcoal and Ethergray Languages supported: English, French, Swedish, Danish, Norwegian, German, Dutch, Portuguese, Italian, Spanish, Finnish, Polish, Turkish, Latvian, Russian Cyrillic alphabet, Katakana CISPR 22B compliant

6 MOBILE VOICE CLIENT 2050 Mobile Voice Client 2050 extends b WLAN IP Telephony to mobile workers using Microsoft Windows Mobile 2003 and 2003 Second Edition Pocket PC PDAs. Voice and data communications are secure for external-to-campus employees with support for IPSec VPN tunneling with Nortel Communication Servers delivering support of up to 650 telephony features. Key Features: Converges business applications onto a single, mobile device delivering full telephony capabilities to Pocket PC-based PDAs, thus eliminating the need for separate voice and data communication devices b WLAN IP Telephony support ensures mobile workers equipped with Pocket PC-based PDAs have flexible access to communications resources anywhere within the enterprise Easy and intuitive interface with feature emulation similar to that of Nortel IP phones Secures transmission of voice and data communications via IPSec standard-based VPN connections TECHNICAL SPECIFICATIONS Platform Compatibility Communication Server 1000 with Release 4.0 and later Meridian 1 with Release 3.0 software or later Business Communications Manager Release 3.6 or later Survivable Remote Gateway Release 1.0 or later PDA model supported Dell Axim models X50v Advanced, X3 and X3i Hewlett Packard ipaq 555x series Toshiba e75x/e80x series Audio Interface Options Nortel tested (wired headsets/headphones only): Plantronics M130i headset supported on Hewlett Packard ipaq and Toshiba PDAs Jensen JM-11 behind-the-neck headphone for use with Dell Axim PDAs Dell headset (supplied by Dell with Axim X50v) Feature Support Emulates IP Softphone Up to 650 telephony features supported (exact number of features is Communication Server dependent) Supports up to twelve programmable/line feature keys User License Requires an unused/available IP Software User License for each Mobile Voice Client 2050 deployed on Communication Server 1000, Survivable Remote Gateway, or Meridian 1 Requires an unused/available IP Telephony client key code for each Mobile Voice Client 2050 deployed on Business Communication Manager Installation: Installation via CDROM. Requires Microsoft ActiveSync.

7 IP SOFTPHONE 2050 The IP Softphone 2050 transforms your PC into a full-featured platform for voice, data, and video communications. It's designed for use as a primary or supplemental desktop telephone, or a telecommuting device. Users simply load the software and plug a Nortel approved headset or handset into the USB Audio Adapter port to start communicating. FEATURES Commonly used features such as call origination, call termination, mute, volume and message waiting indication are accessible to users via the IP Softphone 2050 and the USB audio adapter Traditional telephony features such as Conference and Transfer make the IP Softphone 2050 suitable for everyday business Fixed keys include copy, quit, up, down, right, left navigation keys, mute, up and down volume keys, answer, goodbye, information key, directory, inbox, outbox, services, quick dials, redial list, callers list, local directory Up to 12 (for call servers that offer shift key support) programmable keys for direct access to lines, features, and/or autodials Macro functions for programming lengthy dialing patterns boosts personal productivity Powerful directory capabilities: local (stored on the PC itself) or linked to external directory (LDAP, Outlook, and Symantec ACT are supported) TAPI compliance for operation with other telephony applications such as Microsoft Outlook and ACT Local generation of call alerting, call progress and dialpad tones saving LAN/WAN bandwidth Supports static (VPN) and dynamic (DHCP) IP addressing for maximum flexibility in administration Voice Activity Detection and Silence Suppression support reduces unnecessary traffic across the WAN Customer selectable audio interface options, including support for various 3rd party headsets as well as a Nortel handset TECHNICAL SPECIFICATIONS Platform Compatibility Communication Server 1000 Release 1.1 and later Communication Server 1000M Release 3.0 and later Meridian 1 X11 Release and Succession 3.0 and later Business Communications Manager Release 2.5 and later Multimedia Communication Server 5100 Meridian SL-100 Release 12 Nortel Approved Audio Interface Options GN Netcom DuraPlus Monaural Headset (one ear) or Binaural Headset (two ears) Nortel Handset & Cord Kit charcoal (same handset as IP Phone 200x) Input/Output One IP Network Connection One free (powered) port for USB Audio Kit User License Must have an unused/available user license (ISM parameter) for each IP Softphone 2050

8 IP AUDIO CONFERENCE PHONE 2033 The IP Audio Conference Phone 2033 is a full duplex, handsfree conference phone for the desktop, offering 360 degree room coverage with support of Nortel IP telephony features. It meets the IEEE 1329 standard for full duplex, offers two optional extension microphones, a backlit 3 x 24 monochrome bitmapped LCD with 246 x 68 pixel resolution, 802.1p/Q and DiffServ prioritization, DHCP and G.711/G.729a codecs. 360 degree room coverage with optional expansion microphones offers flexible and expandable coverage for small-to-medium sized conference rooms or offices (up to 20 ft. x 30 ft./ 6.1 m x 9.1 m). Backlit 3x24 LCD promotes enhanced viewing angles for conference users. Ten fixed keys (Line, Release, Hold, Mute, Up/Down Volume, Scroll Up/Down, Messages, Services) and three soft-label keys for easy-to-use navigation. Cross Nortel Communication Server offering with support of up to 650 telephony features (varies by Nortel Communication Server) delivering a rich user experience. Full duplex speakerphone with acoustic clarity technology supports simultaneous natural conversation in conference settings. TECHNICAL SPECIFICATIONS Platform Compatibility Succession 1000 and Meridian 1 on Release 3.0 Nortel Communication Server 1000 Release 4.0 Media Gateway 1000B Physical Specifications: Physical Dimensions: (L)14.5 inches x (W) inches x (D) 2.5 inches; [(L) 36.8 cm x (W) 31.1 cm x (D) 6.4cm] Weight: 1.75 lb. (0.8 kg) 248 x 64 pixel, 3 line x 24 character Flexible Super Twist Nematic (FSTN), fully bitmapped. backlit LCD Twelve key dialpad Ten fixed keys (Line, Release, Hold, Mute, Up/Down Volume, Scroll Up/Down, Messages, Services) and three soft-label keys for easy-to-use navigation Ethernet Connectivity: 10/100Base-T Power Requirements: Universal Power Supply (110/220 V, 50/60 cycles; 100 V for Japan) AC Power Cable (country specific) must be specified Loudspeaker: Frequency Response: Hz Volume: Adjustable to 85 db at ½ meter peak volume Static and Dynamic DHCP Supported Echo Cancellation and Silence Suppression

9 WLAN HANDSETS 2210 AND 2211 Nortel WLAN Handsets 2210 & 2211 are specifically designed for mobile workplace use within a facility using the supported Nortel Networks IP Telephony Call Servers and b Access Points (APs) in a wireless LAN. Nortel WLAN Handsets are extremely simple to use, require minimal training, and are durable enough to withstand the rigors of workplace use. The rugged design has no moving parts or external antenna so there is nothing to break or come loose. A complete set of accessories is available including headsets, chargers, and carrying cases. With the Nortel WLAN IP Telephony solution, enterprises can have fast access to both people and machines with one easy-to-use Handset that lets them: Access critical databases Control equipment remotely Connect to the internet Send and receive messages, faxes, and Receive notification when a computer detects an alarm, by having it ring your phone TECHNICAL SPECIFICATIONS WLAN - Handset Display: Backlit dot matrix with icons and line-status indicators -Dimensions: 5.5" x 2.0" x 0.9" -Weight: 4.2 ounces WLAN - Handset Exclusive push-to-talk functionality -Display: Backlit dot matrix with icons and line-status indicators -Dimensions: 5.9" x 2.2" x 1.0" -Weight: 6.0 ounces WLAN - Handset 2210 & b standard-compatible -Radio frequency: GHz -Transmission type: Direct sequence spread spectrum -Transmit data rates: 11, 5.5, 2, 1 Mb/s, auto rate selection -Transmit power: 100 mw peak, < 10 mwaverage -Wireless security: Standard WEP 40 bit and 128 bit -Battery capacity: 4 hours talk time, max. -80 hours standby

10 Phase 0 phones IP phone 2004 (formerly known as i2004) - old, original phones NTEX00BA: IP Phone 2004 (Ethergray) with North American power supply. NTEX00BB: IP Phone 2004 (Ethergray) no power supply. NT7B10AACH: IP Phone 2004 (Ethergray) with North American power supply (FW Rls 1.0). These are the original IP phone 2004s which did not have an integrated 3 port switch to support a co-located PC. They will work with BS460 and PowerDsine Power over LAN hub, and require a splitter (DY ) to strip the power off the LAN, and feeds it into the barrel jack on the back of the phone Phase 1 phones The Phase 1 IP Phone 2004 and IP Phone 2002 (formerly known as i2002) are still based on the Nortel Networks design, but an integrated switch circuit has been added to the design, so that the phones support a co-located PC IP Phone 2004 * NTDU82AA: IP Phone 2004 with integrated switch (Ethergray), with North American power supply * NTDU82BA: IP Phone 2004 with integrated switch (Ethergray), no power supply * NTDU82AA70: IP Phone 2004 with integrated switch (Charcoal), with North American power supply * NTDU82BA70: IP Phone 2004 with integrated switch (Charcoal), no power supply IP Phone 2002 (Obsolete codes) * NTDU76AA: IP Phone 2002 with integrated switch (Ethergray), with North American power supply * NTDU76BA: IP Phone 2002 with integrated switch (Ethergray), no power supply * NTDU76AA70: IP Phone 2002 with integrated switch (Charcoal), with North American power supply * NTDU76BA70: IP Phone 2002 with integrated switch (Charcoal), no power supply IP Phone 2002 (New codes, these IP phone 2002 models support having their keycaps removed, so that separately orderable English text-label keycaps can be inserted. * NTDU76AB34: IP Phone 2002 with integrated switch (Ethergray), with North American power supply * NTDU76BB34: IP Phone 2002 with integrated switch (Ethergray), no power supply * NTDU76AB70: IP Phone 2002 with integrated switch (Charcoal), with North American power supply * NTDU76BB70: IP Phone 2002 with integrated switch (Charcoal), no power supply Nortel has announced that the phase 1 IP phones, i2002 and i2004, are Manufacturer Discontinue as of 2005 Jan 16. These phones will become End of Life in Q1 of Phase 2 phones 802.3af compliant Class 2, also supports Cisco proprietary power, and legacy PowerDsine powering approach. No splitter required. The IP Phone 2002 and IP Phone 2004 (Phase 1) will be replaced by Phase 2 models. IP Phone 2001 (formerly known as i2001) is a new set off this Phase 2 platform. NOTE - the first IP phone 2004 Phase 2 phones ARE NOT AF compliant. The compliant phones are clearly indicated by a label on the bottom of the telephone set. IP Phone 2001 * NTDU90AA16: IP PHONE 2001 W/ICON KEYCAPS NO POWER SUPPLY ETHERGRAY * NTDU90AA70: IP PHONE 2001 W/ICON KEYCAPS NO POWER SUPPLY CHARCOAL * NTDU90BA16: IP PHONE 2001 W/TEXT KEYCAPS NO POWER SUPPLY ETHERGRAY * NTDU90BA70: IP PHONE 2001 W/TEXT KEYCAPS NO POWER SUPPLY CHARCOAL IP Phone 2002 * NTDU91AA16: IP PHONE 2002 W/ICON KEYCAPS NO POWER SUPPLY ETHERGRAY * NTDU91AA70: IP PHONE 2002 W/ICON KEYCAPS NO POWER SUPPLY CHARCOAL * NTDU91BA16: IP PHONE 2002 W/TEXT KEYCAPS NO POWER SUPPLY ETHERGRAY * NTDU91BA70: IP PHONE 2002 W/TEXT KEYCAPS NO POWER SUPPLY CHARCOAL IP Phone 2004 * NTDU92AA16: IP PHONE 2004 W/ICON KEYCAPS NO POWER SUPPLY ETHERGRAY * NTDU92AA70: IP PHONE 2004 W/ICON KEYCAPS NO POWER SUPPLY CHARCOAL * NTDU92BA16: IP PHONE 2004 W/TEXT KEYCAPS NO POWER SUPPLY ETHERGRAY * NTDU92BA70: IP PHONE 2004 W/TEXT KEYCAPS NO POWER SUPPLY CHARCOAL

11 Due to the overwhelming demand for Style Enhanced (i.e., Charcoal color with a bezel) phones, and to provide portfolio simplification, the Style Enhanced phones will be replacing the non bezel Charcoal color phones. The placement of a bezel around the phone's display presents information at the desktop in a more visually appealing fashion, thereby promoting end user efficiency. The non bezel Charcoal colored Phase II IP Phones 2001, 2002 and 2004 will be Manufacture Retired when Stock is Depleted (MRSD). NTDU90AB70 IP Phone 2001 (Charcoal with Bezel) with icon keycaps without power supply NTDU90BB70 IP Phone 2001 (Charcoal with Bezel) with Eng text 1label keycaps without power supply NTDU91AB70 IP Phone 2002 (Charcoal with Bezel) with icon keycaps without power supply NTDU91BB70 IP Phone 2002 (Charcoal with Bezel) with Eng text 1label keycaps without power supply NTDU92AB70 IP Phone 2004 (Charcoal with Bezel) with icon keycaps without power supply NTDU92BB70 IP Phone 2004 (Charcoal with Bezel) with Eng text 1 label keycaps without power supply NTDU94AA70 i24 Key Exp Module Wall Mount Kit - Charcoal NTDU96AB70 IP Phone 2007 Color Touch screen LCD; Without Power Supply; Includes Stylus NTDW83AA I2050 Soft Phone Client Pkg. i2050 Soft Phone Client Pkg. NTEX11AA70 IP Audio Conference Phone 2033 Package Charcoal with: Power Interface Module; Universal Power Supply; Cabling; without Extension Microphones (Please order NTTK power cord separately). NTEX11BA70 IP Audio Conference Phone 2033 Package Charcoal with: Power Interface Module; Universal Power Supply; 2 Extension Microphones (Charcoal); Cabling (Please order NTTK power cord separately) NTEX11CA Audio Conference Phone 2033 Power Accessories Kit (Power Interface Module; Universal Power Supply; Cabling; please order NNTK power cord separately) NTEX11DA70 IP CONF 2033 CHAR EXT MICS IP Audio Conference Phone 2033 Extension Microphones (2 Charcoal) Cabling NTTK14AB PWR Cord 9.9ft 11CM 125VA AC Power Cord - NA NEMA 5-15P 125V 13A 10ft NTTQ4010 WLAN 2210 Handset NTTQ4050 WLAN 2210 Battery Pack NTTQ4060 WLAN 2210 Desktop Charger NTTQ4061 WLAN 2210 Dual Slot Charger NTTQ4080 WLAN 2210 Clothing Clip NTTQ /2212 Handset Swivel Clip NTTQ40AA WLAN 2210 Handset Kit NA (Includes 2210 Handset, 2210 Battery Pack & 2210 Desktop Charger) NTTQ5010 WLAN 2211 Handset NTTQ5050 WLAN 2211 Battery Pack NTTQ5060 WLAN 2211 Desktop Charger NTTQ5061 WLAN 2211 Dual Slot Charger NTTQ5070 WLAN 2211 Gang Charger Nortel Networks NTTQ50AA WLAN 2211 Handset Kit NA (Includes 2211 Handset, 2211 Battery Pack & 2211 Desktop Charger)

12 IP LINE AND VOICE GATEWAY MEDIA CARDS (VGMC) Formerly known as: IP Line and Internet Telephony Gateway (ITG) Line NTDU41DA IP Line and Voice Gateway Media Cards (VGMC) enable Meridian and IP Telephony Communication Systems to support the M2000 Series of IP phones and softphones. IP Line and Voice Gateway Media Cards for Meridian 1 or Communication Server 1000 run on a single-slot Communication Server Media Card that packetizes and compresses voice for transmission over an IP data network. Drives Internet telephones on Meridian 1 and Communication Server 1000 communication systems. Reduces communications and support costs via converged architecture. Deploys easily in a Meridian 1 or Communication Server 1000 network. Complies with standard codecs (G.711, G.723.1, G.729B, G.729AB). Supports standards-based Layer 2 and 3 Quality-of-Service (QoS) to maintain high voice quality over busy IP networks. TECHNICAL SPECIFICATIONS Meridian 1 Requirements for IP Line 3.0 (Category Minimum Requirements) Systems: Option 11C Mini, 11C, 51C, 61C, 81 and 81C. System Software: Meridian 1: X11 Release or later. X11 Packages: 88 DSET - Digital Set Package 170 ARIES - Aries Terminal Package IPE Card Slots: One IPE Slot per Communication Server Media Card, 32 port Two IPE Slot per ITG-Pentium, 24-port Registered Phones: 128 Phones per Communication Server Media Card, 32 port 96 Phones per ITG-P, 24-port card. Administration: Optivity Telephony Manager (OTM) 2.0 LAN/IP Connections: One Ethernet connection for TLAN (voice path). One Ethernet connection for ELAN (out-of-band management). Communication Server 1000 Requirements for IP Line 3.0 (Category Minimum Requirements) System Software: CSE 1000 Release 1.1 or 2.0 Card Slots: One Slot per Succession Media Card, 32 port Two Slot per ITG-Pentium, 24-port Registered Phones: CSE 1000 Release 1.1: 128 Phones per Succession Media Card - 32 port 96 Phones per ITG-P, 24- port card. CSE 1000 Release 2.0: Phones register via Signaling Server - Not limited by number of Communication Server Media Cards. Administration: CSE 1000 Release 1.1: Requires OTM 2.0 CSE 1000 Rel. 2: CSE 1000 Element Manager OTM 2.0 required for optional features (Corporate Directory, Alarms). LAN/IP Connections: One Ethernet connection for TLAN (voice path). One Ethernet connection for ELAN (out-of-band management). NTDU41EB Media Card 8 Port - Ipl 4.0 Media Card 8 Port - IP Line 4.0 / Voice Gateway $ 2, EA Nortel Networks NTDU41EB NTDU41EC Media Card 32 Port - IPL 4.0 Media Card 32 Port - IP Line 4.0 / Voice Gateway