Turin s Product Family Documentation. What s New in the Documentation?

Transcription

1 Turin Networks Inc. Turin s Product Family What s New in the? Release TR2.1/TN3.1 Publication Date: April 2007 Document Number: TR21 Rev. A

2 FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions may cause harmful interference to radio communications. Canadian Compliance This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respects toutes les exigences du Règlement sur le matériel brouilleur du Canada. Japanese Compliance This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to take corrective actions. International Declaration of Conformity We, Turin Networks, Inc. declare under our sole responsibility that the Traverse platform (models: Traverse 2000, Traverse 1600, and Traverse 600) to which this declaration relates, is in conformity with the following standards: EMC Standards EN55022 EN55024 CISPR-22 Safety Standards EN60950 CSA 22.2 No , ASINZS 3260 IEC Third Edition. Compliant with all CB scheme member country deviations. Following the provisions of the EMC Directive 89/336/EEC of the Council of the European Union. Copyright 2007 Turin Networks, Inc. All rights reserved. This document contains proprietary and confidential information of Turin Networks, Inc., and may not be used, reproduced, or distributed except as authorized by Turin Networks. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Turin Networks, Inc. Turin Networks reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Turin Networks to provide notification of such revision or change. Turin Networks may make improvements or changes in the product(s) described in this manual at any time. Turin Networks Trademarks Turin Networks, the Turin Networks logo, Traverse, TraverseEdge, TransAccess, TransNav, and Creating The Broadband Edge are trademarks of Turin Networks, Inc. or its affiliates in the United States and other countries. All other trademarks, service marks, product names, or brand names mentioned in this document are the property of their respective owners. Government Use Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR (Commercial Computer Software-Restricted Rights) and DFAR (Rights in Technical Data and Computer Software), as applicable.

3 WHAT S NEW IN THE DOCUMENTATION? Contents What s New in the? Sets What s New? New Traverse Hardware New Traverse Software SONET and SDH transport enhancements SDH transport enhancements System and TransNav enhancements What s Changed? All-In-One HTML Multi-document Index and Search Capability Traverse System Product TransNav Management System Product Operations Obtaining CD Feedback List of Tables Table 1 What s New? Table 2 What s Changed? Table 3 Traverse System Product Table 4 TransNav Management System Product Table 5 Operations Release TR2.1.x Turin Networks Page i

4 Page ii Turin Networks Release TR2.1.x

5 Introduction Sets This document describes changes in the customer documentation for the Traverse system and TransNav management system products. This document includes the following topics: Sets, page 1 What s New?, page 2 What s Changed?, page 5 All-In-One HTML Multi-document Index and Search Capability, page 5 Obtaining, page 8 Feedback, page 8 Turin technical customer documentation includes the following sets in this release: Traverse System Product, page 6 TransNav Management System Product, page 7 Operations, page 8 Release TR2.1/TN3.1 Turin Networks Page 1

6 What s New? What s New? This document lists the features from this release and the corresponding document where the most information about that feature can be found. Table 1 What s New? Release Feature Document Reference New Traverse Hardware Next-Generation Ethernet (NGE Plus) modules with Carrier Ethernet Protection Pair (CEPP) capability: 4-port GbE LX plus 16-port 10/100BaseTX / CEP 4-port GbE SX plus 16-port 10/100BaseTX 2-port GbE TX plus 2-port GbE LX plus 16-port 10/100BaseTX / CEP 2-port GbE TX plus 2-port GbE SX plus 16-port 10/100BaseTX Optical splitter to bridge the signal to both next-generation Ethernet modules (NGE or NGE Plus) to provide 1:1 equipment protection for the GbE optical ports Universal 8-port EC-3/STM-1E module with an EC-3/STM-1E electrical connector module (ECM): 1:1 protection with 3-slot-wide, 8-port EC3/STM1 ECM (8-port Mini-SMB, 75 ohm) 1:2 protection with 4-slot-wide, 16-port EC3/STM1 ECM (16-port Mini-SMB, 75 ohm) Universal 8-port OC-3/STM-1 (IR, LR) with a single port timing reference Universal GCM module with ITU compliant OC-48 ELR/STM-16 LH DWDM (42 channels of 100 GHz spacing) optics plus VTX/VCX Traverse Product Overview Guide, Section 1 Overview and Applications, Chapter 3 IP Video Transport, and Section 3 Module Descriptions, Chapter 3 Next-Generation Ethernet Modules Traverse Installation and Commissioning Guide, Section 2 Network Interface Specifications, Chapter 6 Ethernet (Electrical) Interface Cabling Specifications Traverse Provisioning Guide, Section 3 Creating Protection Groups and Section 7 Configuring Ethernet Traverse Installation and Commissioning Guide, Section 2 Network Interface Specifications, Chapter 1 Fiber Optic Interface Cabling Specifications, Optical GbE Port Protection Traverse Provisioning Guide, Section 3 Creating Protection Groups, Chapter 1 Overview of Protection Groups Traverse Product Overview Guide, Section 3 Module Descriptions, Chapter 2 Electrical Modules, 8-Port EC-3/STM-1E Module Traverse Installation and Commissioning Guide, Section 2 Network Interface Specifications, Chapter 2 ECM Interface Specifications and Chapter 5 EC-3 and STM-1E Interface Cabling Specifications Traverse Provisioning Guide, Section 2 Configuring TDM Equipment, Chapter 2 Configuring SONET Equipment, Section 2 Configuring TDM Equipment, Chapter 3 Configuring SDH Equipment, and Section 3 Creating Protection Groups, Chapter 1 Overview of Protection Groups Traverse Product Overview Guide, Section 3 Module Descriptions, Chapter 4 SONET/SDH Modules, OC-3/STM-1 Modules Traverse Installation and Commissioning Guide, Section 2 Network Interface Specifications, Chapter 1 Fiber Optic Interface Cabling Specifications Traverse Product Overview Guide, Section 3 Module Descriptions, Chapter 1 General Control Modules New Traverse Software Page 2 Turin Networks Release TR2.1/TN3.1

7 What s New? Table 1 What s New? (continued) Release Feature ad LAG between modules: Link Aggregation on Carrier Ethernet Protection Pair (CEPP) Multiple virtual RSTP bridging instances (20) Performance monitoring (PM) enhancements for Ethernet: Equipment PM Service PM Document Reference Traverse Product Overview Guide, Section 3 Module Descriptions, Chapter 3 Next-Generation Ethernet Modules, Link Aggregation with CEPP Traverse Provisioning Guide, Section 3 Creating Protection Groups, Chapter 5 Carrier Ethernet Protection Traverse Provisioning Guide, Section 7 Configuring Ethernet, Chapter 7 Rapid Spanning Tree Protocol, page 7-75 TransNav Management System CLI Guide Node Operations and Maintenance Guide, Section 1 System Monitoring, Chapter 1 Performance Monitoring TransNav Management System CLI Guide SONET and SDH transport enhancements Path (or Trail) Trace Identifier. View received section trace, path trace, and signal label TransNav Management System GUI Guide, Section 6 Services, Chapter 2 SONET Services, Configure Advanced Parameters (Alphabetic Order) and Section 6 Services, Chapter 3 SDH Services, Configure Advanced Parameters (Alphabetic Order) SDH transport enhancements 2-port OC-48 / STM-16 supports SDH functionality (in addition to the SONET functionality) Transparent service using the 2-port OC-48 / STM-16 supports SDH functionality (in addition to the SONET functionality) Traverse Provisioning Guide, Section 4 Creating ADM Services, Chapter 3 Creating SONET Services, Section 4 Creating ADM Services, Chapter 4 Creating SDH Services Traverse Provisioning Guide, Section 5 Creating Service Applications, Chapter 6 Creating Transparent Services and Section 4 Creating ADM Services, Chapter 5 Creating 2-Port OC-48/STM-16 Services System and TransNav enhancements Domain security enhancements with Role-based Access Control (RBAC) Enhanced CLI diagnostics Enhanced hardware fault monitoring TransNav Management System Server Guide TransNav Management System GUI Guide, Chapter 1 Managing Server Security, and Chapter 2 Managing Node Security, TransNav Management System CLI Guide Node Operations and Maintenance Guide, Section 1 Fault Management, Chapter 2 Alarms, Events, and Recommended Actions, Alarms/Events, D through K (HWFAULT), Figure 2-12 Hardware Fault Detection Descriptions Release TR2.1/TN3.1 Turin Networks Page 3

8 What s New? Table 1 What s New? (continued) Release Feature In-service upgrade of Traverse and TransNav 1.5.x, 1.5E.x, or R2.0, to TR2.1 IP Quality of Service (QoS) for Traverse IP DCC Node level database backup and restore Secondary TransNav servers SNMP v1/v2 Agent on the Traverse network element with Traverse SNMP MIBs TL1 support for SDH gateway TransNav enhancements: Solaris 10 Up to 200 nodes in a network Process memory usage monitoring Database size monitoring Audit optimization Warning to save user preferences GUI date formatting Software upgrade enhancements Document Reference Node Operations and Maintenance Guide, Section 7 Software Upgrades, Chapter 1 Release TR2.1.x Traverse Software Upgrade and Section 8 Hardware Upgrades, Chapter 1 Replacing Existing Traverse Hardware TransNav Management System Server Guide, Section 2 Management Server Procedures, Chapter 3 Server Administration Procedures TransNav Management System GUI Guide, Section 8 Maintenance and Testing, Chapter 6 Software Upgrades Traverse Provisioning Guide, Section 1 Configuring the Network, Chapter 6 Configuring IP Quality of Service TransNav Management System GUI Guide TransNav Management System CLI Guide TransNav Management System CLI Guide, Section 2 CLI User s Guide, Chapter 1 Node-Level CLI Command List Node Operations and Maintenance Guide, Section 6 Routine Maintenance, Chapter 2 Node Database Backup and Restore Traverse Provisioning Guide, Section 1 Configuring the Network TransNav Management System Server Guide, Section 1 Installation and Description, Chapter 3 Management Server Administration TransNav Management System GUI Guide, Section 3 Network, Chapter 1 Creating and Deleting Equipment Using Preprovisioning TransNav Management System CLI Guide Traverse Provisioning Guide, Section 1 Configuring the Network, Chapter 3 Traverse SNMP v1/v2c Agent and MIBs TransNav Management System GUI Guide, Section 3 Network, Chapter 1 Creating and Deleting Equipment Using Preprovisioning, Configure the Traverse SNMP Agent Parameters Node Operations and Maintenance Guide, Section 9 Appendices TransNav Management System TL1 Guide TransNav Management System Server Guide TransNav Management System GUI Guide Page 4 Turin Networks Release TR2.1/TN3.1

9 All-In-One HTML Multi-document Index and Search Capability Table 1 What s New? (continued) Release Feature TE-50 integration and configuration User-selectable FPGA upgrade capability Document Reference Traverse Provisioning Guide, Section 2 Configuring TDM Equipment, Chapter 5 Creating a TraverseEdge 50 TransNav Management System GUI Guide, Section 5 Equipment, Chapter 6 TraverseEdge 50 (TE-50) Node Operations and Maintenance Guide, Section 7 Software Upgrades, Chapter 1 Release TR2.1.x Traverse Software Upgrade, User- selectable FPGA Upgrade Capability What s Changed? This document includes the following non-release specific additions, changes, corrections, or other enhancements. Table 2 What s Changed? Enhancement 2-port OC-48 services Enhanced list of node- and domain-level CLI commands New Turin Infocenter Document Reference Traverse Provisioning Guide, Section 4 Creating ADM Services, Chapter 5 Creating 2-Port OC-48/STM-16 Services TransNav Management System CLI Guide Registered customers can find the most recent documentation from the Technical section of the Turin Infocenter on the internet at Additional literature is also available. User registration is required. To register for the Turin Infocenter, contact your sales account team. All-In-One HTML Multi-document Index and Search Capability The combined index and integrated search function simplifies finding information across all guides. A Favorites tab provides bookmarking and easy access to key information. Release TR2.1/TN3.1 Turin Networks Page 5

10 Traverse System Product Traverse System Product The Traverse system product documentation set includes the documents described in the table below. Table 3 Traverse System Product Document Description Target Audience Traverse Product Overview Guide Traverse Installation and Commissioning Guide Traverse Provisioning Guide This document provides a detailed overview of the Traverse system. It also includes engineering and planning information. This document provides required equipment, tools, and step-by-step procedures for: Hardware installation Power cabling Network cabling Node power up Node start-up This document provides step-by-step procedures for provisioning a network of Traverse nodes using the TransNav management system. See the TransNav Management System Product. Anyone who wants to understand the Traverse system and its applications. Installers, field, and network engineers Network engineers, provisioning, and network operations center (NOC) personnel Page 6 Turin Networks Release TR2.1/TN3.1

11 TransNav Management System Product TransNav Management System Product The TransNav management system product documentation set includes the documents described in the table below. Table 4 TransNav Management System Product Document Description Target Audience TransNav Management System Product Overview Guide This document provides a detailed overview of the TransNav management system. This document includes hardware and software requirements for the management system. It also includes network management planning information. Anyone who wants to understand the TransNav management system TransNav Management System Server Guide TransNav Management System GUI Guide TransNav Management System CLI Guide TransNav Management System TL1 Guide This document describes the management server component of the management system and provides procedures and troubleshooting information for the server. This document describes the graphical user interface including installation instructions and logon procedures. This document describes every menu, window, and screen a user sees in the graphical user interface. This document includes a quick reference to the command line interface (CLI). Also included are comprehensive lists of both the node-level and domain-level CLI commands. This document describes the syntax of the TL1 language in the TransNav environment. This document also defines all input commands and expected responses for retrieval commands as well as autonomous messages that the system outputs due to internal system events. Field and network engineers, provisioning, and network operations center (NOC) personnel Release TR2.1/TN3.1 Turin Networks Page 7

12 Operations Operations The document below provides operations and maintenance information for Turin s TransNav managed products. Table 5 Operations Document Description Target Audience Node Operations and Maintenance Guide This document identifies required equipment and tools. It also provides step-by-step procedures for: Alarms and recommended actions Performance monitoring Equipment LED and status Diagnostics Test access (SONET network only) Routine maintenance Node software upgrades Node hardware upgrades Field and network engineers Obtaining Feedback Registered customers can find the most recent documentation from the Technical section of the Turin Infocenter on the internet at Additional literature is also available. User registration is required. To register for the Turin Infocenter, contact your sales account team. CD Each documentation CD contains all the documentation for the product release. One documentation CD ships with each Traverse system order. Because Turin distributes customer documentation in portable document format, Adobe Acrobat Reader software for Windows and Sun Solaris is also included on each CD. The documentation CD now contains a start_here.htm file which describes and provides navigation for the content of the CD. Please send comments about Turin technical documentation to support@turinnetworks.com. We appreciate your comments. Page 8 Turin Networks Release TR2.1/TN3.1

13

14 Visit our website at: Release TR2.1/TN3.1 Turin s Product Family TR21