OmniConverterTM. OmniConverter GPoE/S, GPoE+/S and GHPoE/S 10/100/1000 Media Converter with Power over Ethernet (PoE, PoE+ or 60W PoE) KEY FEATURES

Transcription

1 OmniConverterTM 0/00/000 Media Converter with over Ethernet (PoE, PoE+ or 60W PoE) The are multiport media converters that convert 0/00/000BASET copper to 000BASEX or 00BASEX fiber and support overethernet (PoE, PoE+ and 60W PoE). Classified as Sourcing Equipment (PSE), they can provide power to one or two ed Devices (PDs) using standard UTP cables that carry the Ethernet data. OmniConverter PoE media converters provide network distance extension with fiber cabling, and function as PoE injectors that enable powering devices such as IPphones, outdoor PTZ (pantiltzoom) cameras and mutliband multistream wireless WiFi access points. The GPoE/S provides up to 5.40W PoE (IEEE 802.3af) per RJ45 port and the GPoE+/S provides up to 34.20W PoE+ (IEEE 802.3at) per RJ45 port. The GHPoE/S provides up to 60W PoE per RJ45 port and all three OmniConverter models support frame sizes up to 0,240 bytes. Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to cascade multiple media converters, or it may be used as another switch port. Configurable features include link modes and a PoE power reset function that enables a PD device to be reinitialized remotely. When a problem with a PD is identified, the fiber port on a managed switch can be shut down or disconnected, enabling the PoE power reset function on the OmniConverter. The PoE power to the PD is disabled for 2 seconds when a loss of receive fiber link is detected by the OmniConverter, eliminating the need for costly truck rolls to remote PD sites. Link modes can be configured to propagate lossoflink faults to managed devices, immediately notifying administrators of network outages. OmniConverter media converters support fixedfiber connectors and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. They support multimode and singlemode dual fiber; and singlemode singlefiber, in standard and CWDM wavelengths. The compact standalone OmniConverter media converters can be tabletop mounted, wall mounted, or DINrail mounted using an optional DINrail mounting kit. They can also be mounted on a U 9 rackmount shelf. They are available with DC input power via terminal connectors or external 00 to 240V AC power adapters. KEY FEATURES over Ethernet injector/source 0/00/000BASET copper to 000BASEX fiber media converter Supports frame sizes up to 0,240 bytes The GPoE/S supports IEEE 802.3af PoE on one or two RJ45 copper ports The GPoE+/S supports IEEE 802.3at PoE+ on one or two RJ45 copper ports The GHPoE/S supports 60W PoE on one or two RJ45 copper ports Multiple port configurations: 2 Port Device: Fiber + RJ45 3 Port Device: 2 Fiber + RJ45 3 Port Device: Fiber + 2 RJ45 4 Port Device: 2 Fiber + 2 RJ45 Supports 000BASEX fixedfiber and 000BASEX or 00BASEX SFP transceivers Redundant protected fiber link option (using dual SFP transceivers) Compatible with legacy preieee standard powered devices Configurable PoE power reset Available in AC and DC models Integrated wall mount brackets SFPs not included Commercial (0º to 50ºC), wide (40º to 60ºC) and extended (40º to 75ºC) operating temperature ranges Lifetime Warranty and free 24/7 Technical Support

2 APPLICATIONS In this application example, PoE and PoE+ IP surveillance cameras and Wireless Access Points are installed throughout a large facility. A Network switch with fiber ports is used to distribute a fiber link from a control room to a OmniConverter media converter with dual fiber ports. The second fiber port on the OmniConverter is used to daisychain the fiber to the next location, where an OmniConverter media converter with one fiber port terminates the fiber. The OmniConverter media converters provide over Ethernet (PoE) over UTP cables to an IP camera and Wireless Access Point at each location, each of which can be located up to 00m from the media converter. For PoE+ and 60W PoE devices, such as cameras with heaters/blowers or pan/tilt/zoom motors that require up to 25.5W or 60W of power respectively, the OmniConverter GPoE+/S and GHPoE/S may be used. In this application example, a fibertothedesk network is deployed to leverage the security and distance benefits of fiber. In the main data closet, iconverter, miconverter or FlexPoint media converters can be installed in highdensity rackmount chassis to provide reliable and costeffective fiber distribution from existing copper network equipment. Fiber optic cables run to each office, where they are terminated by OmniConverter media converters. The OmniConverter media converters convert fiber to copper and, provide data and power to desktop devices such as IP phones and video conferencing equipment. They automatically disable PoE power to nonpoe desktop devices such as PCs and laptops. Page 2

3 SPECIFICATIONS Description Standard Compliances PoE Supported Modes OmniConverter GPoE/S 0/00/000BASET to 000BASEX Fiber Media Converter with PoE IEEE 802.3, IEEE 802.3af (5.40 watts max) IEEE Alternate A (Alt A) IEEE Alternate B (Alt B) Cisco Legacy and High Cap Pending. 2 A minimum of 52VDC is required to guarantee 25.5 watts at 00 meters on Cat 5 cable or better. OmniConverter GPoE+/S 0/00/000BASET to 000BASEX Fiber Media Converter with PoE+ IEEE 802.3, IEEE 802.3af (5.40 watts max), IEEE 802.3at (34.20 watts max) OmniConverter GHPoE/S 0/00/000BASET to 000BASEX Fiber Media Converter with 60W PoE IEEE 802.3, IEEE 802.3af (5.40 watts max), IEEE 802.3at (34.20 watts max) 60W PoE IEEE Alternate A (Alt A) IEEE Alternate B (Alt B) Regulatory Compliances UL, CE, FCC Class A UL, CE, FCC Class A Frame Size Port Types Cable Types AC Requirements DC Requirements Dimensions Weight Temperature Humidity Copper: Fiber: Copper: Fiber: AC Adapter: ( RJ45 Port) AC Adapter: (2 RJ45 Ports) DC Input: ( RJ45 Port) DC Input: (2 RJ45 Ports) w/o Adapter: w/ Adapter: Commercial: Wide: Extended: Storage: Up to 0,240 bytes 0/00/000BASET (RJ45) 00BASEX (SFP) 000BASEX (ST, SC, LC, SFP) 000BASEBX (SC, SFP) EIA/TIA 568A/B, Cat 5 UTP and higher Multimode: 50/25, 62.5/25µm Singlemode: 9/25µm VAC/47 to 63Hz 20VAC (typical) VAC/50 60Hz 20VAC (typical) +/46 to +/57VDC; 48VDC +/46 to +/57VDC; 48VDC W: 4.5 x D: 6.0 x H.0 L: 4.3 mm x B: 52.4 mm x H: 25.4 mm. lb.; grams.6 lbs.; grams 0 to 50 C 40 to 60 C 40 to 75 C 40 to 80 C 5 to 95% (noncondensing) Altitude 00m to 4,000m MTBF (hours) Warranty AC Adapter: 83,000 DC: 474, VAC/47 to 63Hz 20VAC (typical) VAC/50 60Hz 20VAC (typical) +/48 to +/57VDC;* 48VDC +/48 to 48VDC. lb.; grams 2.3 lbs.; grams AC Adapter: 83,000 DC: 474,000 Lifetime warranty with 24/7/365 free Technical Support VAC/47 to 63Hz 20VAC (typical) VAC/50 20VAC (typical) +/48 to +/57VDC; 56VDC +/48 to +/57VDC; 2 56VDC. lb.; grams 2.3 lbs.; grams TBD Function/Feature OmniConverter GPoE/S OmniConverter GPoE+/S OmniConverter GHPoE/S available at PD 2.95 Watts Watts 50.0 Watts max. Maximum power by PSE 5.40 Watts Watts 60.0 Watts Supported Modes IEEE Alternate A (Alt A) IEEE Alternate B (Alt B) Legacy 60 Watts Vport Positive pins,2 Vport Negative pins 3,6 Vport Positive pins 4,5 Vport Negative pins 7,8 Vport Positive pins 7,8 Vport Negative pins 4,5 Vport Positive pins,2 Vport Negative pins 3,6 Vport Positive pins 4,5 Vport Negative pins 7,8 Vport Positive pins 7,8 Vport Negative pins 4,5 Vport Positive pins,2 Vport Negative pins 3,6 Vport Positive pins 4,5 Vport Negative pins 7,8 4 Pair ing Vport Positive pins 3,6 and 4,5 Vport Negative pins,2 and 7,8 Page 3

4 ORDERING INFORMATION OmniConverter GPoE/S IEEE 802.3af PoE 9 4 x x x x a b <Blank> Commercial Operating Temperature Range Model 0 to 50 C W Wide Operating Temperature Range Model 40 to 60 C Z Extended Operating Temperature Range Model 40 to 75 C External AC Adapter, 00240VAC, with US Cord 2 External AC Adapter, 00240VAC, with no Cord 8 External AC Adapter, VAC (JET/PSE), with JPN Cord 9 Direct DC input, with 3 pin terminal connector Fiber Type Distance Number of RJ45 Ports Connector Type ST SC SFP Tx Rx Min. Tx Max. Tx Min. Rx Max. Rx Min Attenuation Link Budget MM 220/550m SF 2 SF 2 SF 2 SF 2 34km 80km 0km SFP (x) SFP (x2) /25µm, 00/40µm multimode fiber up to 220m. 50/25µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications. 2 When using singlefiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other. Contact Omnitron for other fiber options and operational temperature ranges. Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page. Accessories Model Number Description DINRail Mounting Bracket rack mount shelf Page 4

5 ORDERING INFORMATION OmniConverter GPoE+/S IEEE 802.3at PoE+ 9 4 x x x x a b <Blank> Commercial Operating Temperature Range Model 0 to 50 C W Wide Operating Temperature Range Model 40 to 60 C Z Extended Operating Temperature Range Model 40 to 75 C External AC Adapter, 00240VAC, with US Cord 2 External AC Adapter, 00240VAC, with no Cord 8 External AC Adapter, VAC (JET/PSE), with JPN Cord 9 Direct DC input, with 3 pin terminal connector Fiber Type Distance Number of RJ45 Ports Connector Type ST SC SFP Tx Rx Min. Tx Max. Tx Min. Rx Max. Rx Min Attenuation Link Budget MM 220/550m SF 2 SF 2 SF 2 SF 2 34km 80km 0km SFP (x) SFP (x2) /25µm, 00/40µm multimode fiber up to 220m. 50/25µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications. 2 When using singlefiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other. Contact Omnitron for other fiber options and operational temperature ranges. Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page. Accessories Model Number Description DINRail Mounting Bracket rack mount shelf Page 5

6 ORDERING INFORMATION OmniConverter GHPoE/S 60W PoE 9 5 x x x x a b <Blank> Commercial Operating Temperature Range Model 0 to 50 C W Wide Operating Temperature Range Model 40 to 60 C Z Extended Operating Temperature Range Model 40 to 75 C External AC Adapter, 00240VAC, with US Cord 2 External AC Adapter, 00240VAC, with no Cord 8 External AC Adapter, VAC (JET/PSE), with JPN Cord 9 Direct DC input, with 3 pin terminal connector Fiber Type Distance Number of RJ45 Ports Connector Type ST SC LC SFP MM 220/550m LC MM (x2) LC (x2) SF 2 SF 2 SF 2 SF 2 220/550m 9506D D02 34km 80km 0km SFP (x) SFP (x2) D D Tx Rx Min. Tx Max. Tx Min. Rx Max. Rx Min Attenuation Link Budget /25µm, 00/40µm multimode fiber up to 220m. 50/25µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications. 2 When using singlefiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other. Contact Omnitron for other fiber options and operational temperature ranges. Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page. See page 5 for ordering Accessories 205 Omnitron Systems Technology, Inc. OmniConverter is a registered trademark of Omnitron Systems Technology, Inc. Trademarks are owned by their respective companies. Specifications subject to change without notice. All rights reserved K 4/ info@omnitronsystems.com 38 Tesla, Irvine, CA 9268 Page 6