Intelligent Entertainment Infrastructure Security Solutions

Size: px

Start display at page:

Download "Intelligent Entertainment Infrastructure Security Solutions"

Marcus Jackson
5 years ago
Views:

1 Aria TM By CHANNEL VISION Flush Mount Amplifier Spkrs Active Local In IR In 24VDC A0915 ibus Wall-Dock Single Room Kit Intelligent Entertainment Infrastructure Security Solutions

2 Product Introduction Simplify your installation with ARIA Audio Systems single zone audio package. This single zone ipod audio package allows you to customize individual rooms to give anyone in condos, hotels, dorm rooms, and bedrooms control over their own ipod in their own space. The A0915 Kit includes the ibus Wall Dock for ipod, 100W Amplifier, Keypad controller, and one pair of 6.5" architectural speakers. Features:! 100 Watt integrated class D amplifier!pre-amp audio outputs for easy connection to powered subwoofer!local audio input!easy installation!ipod Dock included!speakers included 1. Read these instructions. 2. Keep these instructions for future reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this device near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with these instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. This apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Unplug this apparatus during lightning storms or when unused for long periods of time CAUTION RISK OF ELECTRIC SHOCK! DO NOT OPEN Warning: To reduce the risk of electric shock, do not remove the cover (or back), no user serviceable parts inside, refer servicing to qualified service personnel. 2

3 Pwr Vol + Vol - Mute Included Products A0129: IR repeating keypad. The A0129 contains the IR codes to operate the volume control on the A0350. You may also use a standard IR receiver such as the IR When using a simple IR receiver, you will need to use the A0505 remote control which contains the IR codes to control the A0350. IR codes can be downloaded from or learned from an A0505 remote control. Spkrs Active Local In Aria TM By CHANNEL VISION Flush Mount Amplifier IR In 24VDC A0350: 100 watt (50 watt per channel) amplifier. The A0350 has an audio output (RCA) on the back, as well as a local (RCA) audio input on the front. Speaker outputs can be used on either the front or the back. A 24vDC 4 Amp power supply is included with this amplifier. A0315: The A0315 is an on-wall ipod docking station for CAT5 audio systems. The dock connector slides in and out to adjust for any ipod and the nonskid pad helps to hold the music player in place. The A0315 s elegant and contemporary styling make it the perfect choice for anyone who wants to enjoy their music without defacing their wall. IC608: ARIA S Builder Series 120 watt 6.5 In-Ceiling Speakers are designed for economical sound system installations. 3

4 Installation A0350 Installation The A0350 can be installed in the wall using a standard 2-gang junction box or low-voltage mounting ring. In-Wall Installation Attach unit with the provided screws Aria TM By CHANNEL VISION Flush Mount Amplifier Spkrs Active Local In IR In 24VDC Standard 2-gang ring or extra deep j-box (not included) Note: if using a j-box, it must have a minimum depth of 3.5 Take care not to pinch wires when installing into 2-gang box. Installing the A0315 Trim Plate Accessory Follow the diagram below to install the trim plate accessory that is included with the A0315 ipod dock. Install Output wall plate in j-box Snap trim into place Install Trim plate chassis over output wall plate Snap front cover over chassis Snap side flange on to front cover 4

5 Installation Continued A0315 Installation Steps 1. Connect all wiring. 2. Attach main chassis to j-box using the provided four 6-32 screws. 3. Feed the dock connector circuit board through the opening in the front cover. 4. Hang the front cover on the main chassis from the two top tabs Secure the front cover with the two small screws at the bottom. 6. Place the dock platform over 6 the slide rail and push downward until the retention snaps are engaged. 7. Slide the side protectors into the slots on the main chassis Slide Rail 6 Retention Snap Steps 3 & 4 complete Steps 5 & 6 complete Completed Installation 5

6 Installation Continued In some installations it may be desirable to mount a single gang control keypad next to the A0315. To accomplish this, the single gang trim plate can be installed next to the A0315 in a 3-gang junction box. Follow the steps below: Installation Steps 1. Connect all wiring. Use the correct installation tools: J-110 tool, or 1014 crimp tool. 2. Install keypad and single-gang trim plate in the far left position of the 3-gang junction box. (See details on page 3) 3. Leave off the right side flange and trim piece. 4. Install the ipod dock in the left side of the 3-gang j-box. It will overlap and snap into the single gang trim plate. (See page 5 for details) 3 4 See attachment detail on previous page Completed Installation 6

7 Basic System Diagram The A0350 can be flush-mounted in a room to power in-wall speakers. By connecting the audio outputs from an audio source to the RCA inputs of the A0350, the audio signal will be amplified to the in-wall speakers. Most audio sources only offer a fixed audio output, A0350 volume level can be adjusted by using an A0129 keypad or by connecting an IR-2400 and using a compatible remote such as model A0505. The RCA audio outputs on the back of the A0350 can be connected to a powered subwoofer to add more bass to your audio system. Connect the A0315 to the CAT5 input on the back of the A0350. Plug the A0129 into the back of the keypad input on the back of the A0350. A0129 A0350 Aria TM By CHANNEL VISION Flush Mount Amplifier Pwr Vol + Vol - Mute Plug into keypad input on backof A0350 Spkrs Active Local In IR In 24VDC Plug into CAT5 audio input on back of A0315 CD player A0315 Plug into CAT5 output on back of A0315 7

8 Troubleshooting Problem: Hum in System Troubleshooting: Plug all parts of the system into the same outlet to see if the hum goes away. Try lifting the ground with a ground lifting plug. Cause: The different components in the system are connected to different electrical grounds. This forces electrical currents to find alternate paths to ground causing an audible 60Hz hum. Solution: Plug products into an electrical circuit with a common ground. Problem: RCA Audio input is not working. Troubleshooting: Verify source audio is playing, or try another audio source Adjust sensitivity knob on bottom of A0350. Check speaker wires to verify nothing is backwards or crossed. Cause: There is no signal (or very weak signal) coming from the source, or source is not compatible with A0350. Solution: Make sure the source audio is playing. Turn the sensitivity knob on the bottom of the A0350 clockwise or counter clockwise to adjust input for sources that are provided a weak level output. Problem: CAT5 audio input (ipod dock) is not working Troubleshooting: Verify you have plugged the CAT5 into the output on the back of the A0315. Verify you have plugged the CAT5 into the terminal labeled audio input on the back of the A0350. Cause: ipod dock not connected properly, wire crimped improperly or plugged into the wrong terminal. Solution: Verify wiring, verify RJ-45 crimps, 8

9 Troubleshooting Continued Problem: ipod not charging Troubleshooting: Verify you have plugged the CAT5 into the output on the back of the A0315. Verify you have plugged the CAT5 into the terminal labeled audio input on the back of the A0350. Cause: ipod dock not connected properly, wire crimped improperly or plugged into the wrong terminal, ipod too old (not compatible) or has a very worn out connector that is not making a good connection to the A0315 dock. Solution: Verify wiring, verify RJ-45 crimps, try a different ipod Problem: A0129 not controlling volume Troubleshooting: Make sure there is a strong and constant signal coming from the ipod dock or audio source. if an ipod, try a different song. If the RCA input is being used, try a different source or adjust the audio level of the source. Verify the right and left audio trim pots on the bottom of the A0350 are close to all the way up. Cause: There is no signal (or very weak signal) coming from the source, or the audio level feeding into the A0350 is too low. It is possible the A0129 is wired incorrectly. Solution: Verify wiring, verify RJ-45 crimps, verify connection on the back of the A0129. Problem: A0350 is now powering on Troubleshooting: Verify wiring, test the 24vDC power supply that came with the A0350. Cause: The power supply is plugged in incorrectly or is not functioning properly. Solution: Verify power supply voltage with a volt meter, verify polarity if using the side power connection on the A

10 Certifications Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:!reorient or relocate the receiving antenna.!increase the separation between the equipment and receiver.!connect the equipment into an outlet on a circuit different from that to which the receiver is connected.!consult the dealer or an experienced radio/tv technician for help.!modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. Pin-out Top view: Green/White - Left Channel Audio Ground Green - Left Channel Audio Orange/White - Right Channel Audio Ground Blue - IR Signal Blue/White - Status Orange- Right Channel Audio Brown/White 24vDC Ground Brown 24vDC 10

11 Specifications A0350 Specifications: (typical at 77 º ) Amplifier: Power input: 24VDC 4 Amps Output power: 50 Watts/ch RMS into 6 <10% THD Frequency Response: 20-20kHz (+/-3dB) Signal to Noise Ratio: >85dB Input Sensitivity: 500mVRMS Auto On Threshold: 10mVRMS Storage Temperature: -40 to +85º C Operating temperature: 0 to +55º C *Specifications subject to change without notice A0315 Specifications: (typical at 77º) Operating Voltage : 15VDC (provided by A0350) Cable Requirements: CAT5 or better Operating Temperature: -10ºC to +50ºC A0129 Specifications: (typical at 77º) Operating Voltage : 12VDC (provided by A0350) Cable Requirements: CAT5 or better Operating Temperature: -10ºC to +50ºC IC608 Specifications: (typical at 77º) Frequency range: Power Handling: 120 Watts Drivers: Impedance: 60Hz - 20kHz ± 3dB High compliance polymer Polypropylene woofer 8 ohms Finish: ABS plastic Dimensions: 9 OD Hole size:

12 1 Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for one year from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser when purchased from an authorized distributor, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided. Mail in service can be obtained during the warranty period by calling (714) A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton. This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center. Channel Vision products are not intended for use in medical, lifesaving, life sustaining or critical environment applications. Channel Vision customers using or selling Channel Vision products for use in such applications do so at their own risk and agree to fully indemnify Channel Vision for any damages resulting from such improper use or sale. *ipod is a trademark of Apple, Inc., registered in the U.S. and other countries. Intelligent Entertainment Infrastructure Security Solutions 234 Fischer Avenue, Costa Mesa, California USA (714) (800) (714) fax techsupport@channelvision.com w w w. c h a n n e l v i s i o n. c o m Rev A

A0319. Bluetooth Wall-Dock for Distributed Audio. Intelligent Entertainment Infrastructure Security Solutions

A0319. Bluetooth Wall-Dock for Distributed Audio. Intelligent Entertainment Infrastructure Security Solutions A0319 Bluetooth Wall-Dock for Distributed Audio Intelligent Entertainment Infrastructure Security Solutions The A0319 is an on-wall bluetooth docking station that will charge an ipod, iphone or itouch