Dongtai Yanshan Instrument Factory

Transcription

1 Ultrasonic Meter Catalogue Dongtai Yanshan Instrument Factory

2 YS-2000 Series Ultrasonic flow meter meter is one of a Transit-time flow meters work by measuring the time of flight difference between an ultrasonic pulse sent in the flow direction and an ultrasound pulse sent opposite the flow direction. It can continuously measure the flow rate, while other methods generally measure average flow rates. In addition, ultrasonic flow meters are obstruction less and work with non-conductive fluids. Ultrasonic flow meters are generally configured, such that a generated ultrasonic wave is caused to propagate through a fluid flowing through a tubular path of the ultrasonic flow meter. And YS-2000 Series Ultrasonic flow meter has multifunction to choose, so that customers have large range of choice according their own requirements. Separate Fixed Ultrasonic Flowmeter YS-2000S Feature High Accuracy Linearity:better than 0.5%; Repeatability:better than 0.2%; Accuracy:better than 1%; Wide Measuring Range Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm High Reliability Adopt low voltage,multi-pulse technology to improve accuracy,reliability Size :170*180*56mm Strong Anti-interference Dual-balance signal differential receiver/driver circuit to avoid interference of converter,tv tower,high voltage line etc. Powerful record function Automatically record the following data: The totalizer data of the last 512 days /128months/5 years ; The time and corresponding flow meter of the last 64 times of power on and off events ; The working status of the last 32 days. 2

3 Optional Transducer Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Medium transducer Large Small transducer Medium transducer TM-1 DN50 ~ TL-1 DN300 ~ DN6000mm HTS-1 DN15~DN100mm -30~160 ±1% HTM-1 DN50 ~ -30~160 TC-1 Standard -40~90 Insertion DN80--DN6000mm TLC-2 Lengthen -40~90 Prover Section Prover Section ±0.5% DN15~1000mm 0~160 Power Supply DC8--36V or AC220V Input 3 channel 4--20mA input Output Communication Protocols Isolation RS232/RS485 output,2 channel isolation OCT output;1 channel isolation 4--20mA output(two-wire ) Compatible with Meter-bus,Modbus,Fuji extended protocol and general other water protocal 3

4 Structure of Secondary Meter Structure of clamp-on measurement Wall-mounted (YS-2000SW) For hanging installation Size :170*180*56mm Special cable Structure of insertion measurement Panel-mounted (YS-2000SS) For Panel installation Size : mm Special cable Structure of prover section measurement Explosion-proof (YS-2000SD) Explosion-proof grade is DIIBT4 Size : mm Special cable 4

5 Industrial Ultrasonic Water Meter YS-2000W Feature Multi-way power supply 3.6V Li battery powered ( 5 years operation continually);8--36vdc powered,when the DC power supply is cut off,the battery will continue to work. High protection Grade Protection rate :IP68,it can under water 2m Design of general application The length of the pipeline is designed into length of normal water meter pipeline, so it is easy to replace Wide measuring range Several model transducer to choose and can measure DN15--DN6000 pipe line Humanist design Simplicity of aperator with magnetic stick ;Self-diagnosis error function;graphical error display ;Accumulated flow/heat (positive and negative ),instantaneous flow,velocity display in circle. Main Unit Additional function: 3 channel 4--20mA input; Isolation RS232/RS485 output,2 channel isolation OCT output;1 channel isolation 4--20mA output(two-wire ); 2 channel restance signal input of PT-100 to measure calorie/heat. Optional secondary meter Wall-mounted(YS-2000FW) For hanging installation Size :178*165*55mm Panel-mounted(YS-2000FS) For Panel installation Size : mm Explosion-proof(YS-2000FD) Explosion-proof grade is DIIBT4 Size : mm 5

6 Optional accessory Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Medium transducer Large Small transducer Medium transducer TM-1 DN50 ~ TL-1 DN300 ~ DN6000mm HTS-1 DN15~DN100mm -30~160 ±1% HTM-1 DN50 ~ -30~160 TC-1 Standard -40~90 Insertion TLC-2 Lengthen DN80--DN6000mm -40~90 Prover Section Prover Section ±0.5% DN15~1000mm 0~160 Power Supply Input DC8--36V or AC220V 3 channel 4--20mA input Output Communication Protocols Isolation RS232/RS485 output,2 channel isolation OCT output;1 channel isolation 4--20mA output(two-wire ) Compatible with Meter-bus,Modbus,Fuji extended protocol and general other water protocal Optional transducer Feature Clamp-on transducer Installation without cutting off flow and no pressure drop Measuring accuracy up to ±1% Easy to install and maitain,user s can install themselves The lowest price and independent of pipe size Suitable for good condition Structure 6

7 Insertion transducer Installation without cutting off flow and no pressure drop Measuring accuracy up to ±1% Instalation should need special tapper after training The higher price and independent of pipe size Strong data signal and stability and reliability for long time working Prover transducer Installation with cutting off pipe & flow and no pressure drop Measuring accuracy up to ±0.5% User s can install themselves Price depend on the pipe size,higher price. Highest accuracy strong data signal and stability and reliability for long time working Structure of UFM Single point measuring (several optional secondary meter for long distance display and parameter setup) RS485 Bus communication (transmission distance up to 1000m) Network structure(for remote monitor and data collector) Note:Power supply and communicate with four -core cable (Red:224+,Black:24V-;white:485+;Green:485-) 7

8 Portable Ultrasonic flow meter YS-2000P Feature Feature High Accuracy Linearity:better than 0.5%; Repeatability:better than 0.2%; Accuracy:better than 1%; Non-intrusive measurement; Non-intrusive and clamp-on transducer,no pressure drop and no pipe disturbing. Wide Measuring Range Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm; High Reliability Adopt low voltage,multi-pulse technology to improve accuracy,reliability ; Large capability battery Built-in rechargeable Ni-MH battery provide over 20 hours of continuous operation; Built-in printer; Built-in printer mini thermal printer with instant and timing print function. Standard configuration Main body Size: mm Medium transducer TM-1 Special cable: 5m 2 stretcher :3m 2 Tape ruler :3m Thermal paper :30m 2 Optional Transducer 8 Power supply wire Coupling agent :110g Carrying case (Dust-proof, waterproof, Anti-shock)

9 Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Mediu transducer m Large Small transducer TM-1 DN50 ~ TL-1 DN300 ~ ±1% DN6000mm HTS-1 DN15~DN100mm -30~160 Medium transducer HTM-1 DN50 ~ -30~160 Optional accessory stretcher Special cable Thermal paper Items Performance and technical parameters Body 2*20 LCD Display;Working temperature: Micro-thermal printer with 24 characters output Data interface RS standard TS-1 type :DN15 DN100mm 2standard TM1 type :DN50 Liquid temp<90 Sensor 3 standard TL-1type DN300 DN6000mm 4.erature small type HTS-1:DN15 DN100mm Liquid temp< erature medium type:dn50--- Measuring water, industrial effluent, acid-,alkali solution, a variety of oils, and other can media conduct sound wave fluids. Flow range 0~±32m/s Accuracy Better than ±1% Power supply Ni-MH battery can work more than 20 hours continually, or 220VAC Power 1.5W consumption Charge Intelligent charge,connect AC 220V directly, automatically cutoff. Weight Net weight:2.5kg(body) remark Attaching High-strength protective box,it can used on bad condition 9

10 Dongtai Yanshan Instrument Factory Handhold Ultrasonic flow meter YS-2000H Feature High Accuracy Linearity: better than 0.5%; Repeatability: better than 0.2%; Accuracy: better than 1%; Non-intrusive measurement Non-intrusive and clamp-on transducer pressure drop and no pipe disturbing,no Wide Measuring Range Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm Light weight Size :210*90*30mm,only 0.5KG Large capability battery Built-in rechargeable Ni-MH battery provide over 12 hours of continuous operation Size: mm Built-in data logger Built-in 24K data logger,store over 2000lines measuring data Standard configuration Main body Size: mm stretcher :3m 2 10 Medium transducer TM-1 Tape ruler :3m Special cable:5m 2 Data line Power supply wire Coupling agent :110g Carrying case (Dust-proof, waterproof, Anti-shock)

11 Optional Transducer Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Mediu transducer m Large Small transducer TM-1 DN50 ~ TL-1 DN300 ~ ±1% DN6000mm HTS-1 DN15~DN100mm -30~160 Medium transducer HTM-1 DN50 ~ -30~160 Optional accessory stretcher Special cable General Specifications Items Performance and technical parameters Linearity 0.5% Repeatability 0.2% Accuracy Reading ±1%,flow speed>0.2m/s Response time 0.999s Flow range ±32m/s Measuring diameter 15mm 6000mm Measuring units M,feet,m3,feet3,gal,bbl,and others users can set by yourself Totalizer 7digits,positive,negative,and total Measuring liquid All kinds of liquids can conducts ultrasonic Safety Lock setting value,if change the value,it is needed unlock Display 4*16 English Communication interface RS232, Baud rate ,it also be used with other ultrasonic flowmeters Sensor 5 types to choose,the standard is medium sensor TM-1type Sensor cable Standard 5m*2,or add 10m*2 Data record Built in data recorder,can record 2000 lines data Mechanical accumulation 7digits,press the key can start to calibrate Coat material Flame Retardant Materials: ABS 11

12 Size 210*90*30mm Power supply 3 pieces of AAA Ni-H battery, including battery, can work more than 20 hours continually,ac100v-240v power supply wire Weight 500g Low-Flow Ultrasonic flow meter YS-2000C Advantages: 1.Higher Accuracy:Measuring accuracy is ±1%; 2.Lower Measuring Range:the lowest measuring rate is 10ml/min; 3.The Materials of the sensor is PFA,and simple structure,have no movable part and residues; 4.It is available to high viscosity liquids.the viscosity range of liquids is cSt; 5.Stronge corrosive proof:parts materials of the sensor which contact with liquids is PFA,others is PE,so it can measure stronge corrosive liquids; 6.Easy to Install: The main body and the sensor is installed respectively, and the inlet and outlet pipe are standard diameter,so it is very convenient. Items Material Applications: sensor PFA Contacted liquid part Sensor coat Cable attachment pipe PFA PP PP 1.production of pure water and ultrapure water in Semiconductor 2. Chemical-mechanical abrasive Slurry 3. Dosing 4.Stronge corrosive liquids 5.Low flow rate liquids Cable skin PVC 12

13 Technical Parameters: Measuring range: L/min; Liquid temperature: ; Accuracy:0--1.6L/min:±0.017L/min; Standard Inside Dia of inlet/outlet:6mm; L/min: 1% ; Liquid preessure: mpa; Liquid sound speed: m/s; Movement viscosity of fluid: cst ; Pressure consumption Coefficient:0.5; Connection pipe:3/8 ; Protection grade:ip65; Signal output:programmable 4--20mA ; Signal input: 3 wire 420mA output; Data interface:rs-485 double interface,modbus,meter-bus; Programmable quantitative controller:10 operating signal, including input signal or assigned by MODBUS quantitative controller; Power supplier: Isolated 8--36VDC or VAC. Main Body Selection Main Body Transducer(sensor) A: B: C : 13

14 Ultrasonic Flow Meter/Calorimeter YS/YSC-2000M Feature Feature Powerful function Analog output :1 channel 4--20mA,can be used for flow/heat transmitter;oct output :2 channel,can be used for flow/heat switch; Analog input:3 channel 4--20mA,can be used for data collector ;Tri-wire resistance signal input(pt100);2 channel,can be used for calorimerter. Small size: mm Far transmission distance Connect flow/heat module and secondary meter through RS-485 interface,transmission distance up to 1000m,solve the problems of high cost of special cable,poor anti-interference,short transmission distance etc. LCD screen 2 10 Four keys Working power:8~36vdc Output: RS485;2 roads OCT; 1 road 4~20mA Input: 3 roads 4~ 20mA, 2 road 3-wire PT100 resistance signal Support MODBUS,METERBUS,GPRS and other protocols High Accuracy Linearity:better than 0.5%; Repeatability:better than 0.2%; Accuracy:better than 1%; Wide Measuring Range Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm Optional Transducer Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Medium transducer Large Small transducer DN50 ~ TM-1 ±1% DN300 ~ TL-1 DN6000mm HTS-1 DN15~DN100mm -30~160 14

15 Medium transducer HTM-1 DN50 ~ -30~160 TC-1 Standard -40~90 Insertion TLC-2 Lengthen DN80--DN6000mm -40~90 Prover Section Prover Section ±0.5% DN15-- 0~160 Platinum Resistance PT100 DN15 DN6000mm -40~300 Power Supply DC8--36V or AC220V Input 3 channel 4--20mA input Output Communication Protocols Isolation RS232/RS485 output,2 channel isolation OCT output;1 channel isolation 4--20mA output(two-wire ) Compatible with Meter-bus,Modbus,Fuji extended protocol and general other water protocal Structures Composition diagram of flow measurement Clamp-on transducer Insertion transducer Flow transmitting signal (4--20mA,pulse etc.) Prover Section transducer 15

16 Composition diagram of net Can collect pressure,level,temp,etc. 3 channel current signal RS485 (transmitting distance can up to 1000m) 24V power supply Subsite 1 Subsite N Note: Power supply and communicate with four -core cable (Red:224+,Black:24V-; white:485+;green:485-) Ultrasonic Calorimeter YSC-2000F Feature Feature Far transmission distance and easy to set up net work Connection with primary and secondary meter through RS-485 interface,normal cable replaces special cable,transmission distance up to 1000m,convenient and quick network setup solve the probless of high cost of special cable.poor anti-interference,short transmission distance etc. High Reliability Adopt low voltage,multi-pulse technology to improve accuracy,reliability. 16

17 Wide Measuring Range Dongtai Yanshan Instrument Factory Powerful function Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm. Automatically record the day totalizer data of the last 64 days and month totalizer data of the last 32 months(2 yeas),add day/month/year record ; Read of the day/month/year totalizer data with MODBUS protocol Optional Transducer Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Medium transducer Large Small transducer Medium transducer TM-1 DN50 ~ TL-1 DN300 ~ DN6000mm HTS-1 DN15~DN100mm -30~160 ±1% HTM-1 DN50 ~ -30~160 TC-1 Standard -40~90 Insertion TLC-2 Lengthen DN80--DN6000mm -40~90 Prover Section Prover Section ±0.5% DN15-- 0~160 Platinum Resistance PT100 DN15 DN6000mm -40~300 Power Supply DC8--36V or AC220V Input 3 channel 4--20mA input Output Communication Protocols Isolation RS232/RS485 output,2 channel isolation OCT output;1 channel isolation 4--20mA output(two-wire ) Compatible with Meter-bus,Modbus,Fuji extended protocol and general other water protocal 17

18 Structure of UFM Single point measuring (several optional secondary meter for long distance display and parameter setup) RS485 Bus communication (transmission distance up to 1000m) Network structure(for remote monitor and data collector) Return pipe supply pipe Return pipe supply pipe Note:Power supply and communicate with four core cable (Red:224+,Black:24V-;white:485+;Green:485-) 18

19 Separate Fixed Ultrasonic Calorimeter YSC-2000S Feature Feature Wide Measuring Range Several types transducer for selection,measuring pipe size from DN15mm to DN6000mm; High Reliability Adopt low voltage,multi-pulse technology to improve accuracy,reliability; Powerful record function Automatically record the following data: The totalizer data of the last 512 days /128months/5 years ; The time and corresponding flow meter of the last 64 times of power on and off events can read through MODBUS. Size :170*180*56mm Programmable quantitative controller Built-in programmable quantitative controller,start with outside signal input or MODBUS protocol. 19

20 Optional Transducer Dongtai Yanshan Instrument Factory Optional transducer Model Picture Accuracy Measuring Range Temp range Small TS-1 DN15~DN100mm Clamp-on Medium transducer Large Small transducer Medium transducer TM-1 DN50 ~ TL-1 DN300 ~ DN6000mm HTS-1 DN15~DN100mm -30~160 ±1% HTM-1 DN50 ~ -30~160 TC-1 Standard -40~90 Insertion TLC-2 Lengthen DN80--DN6000mm -40~90 Prover Section Prover Section ±0.5% DN15-- 0~160 Platinum Resistance PT100 DN15 DN6000mm -40~300 Power Supply DC8--36V or AC220V Input 3 channel 4--20mA input Output Communication Protocols Isolation RS232/RS485 output,2 channel isolation OCT output;1 channel isolation 4--20mA output(two-wire ) Compatible with Meter-bus,Modbus,Fuji extended protocol and general other water protocal 20

21 Structure of Ultrasonic calorimeter Structure of clamp-on measurement Wall-mounted(YS-2000SW) For hanging installation Size :170*180*56mm Structure of insertion measurement Panel-mounted(YS-2000SS) For Panel installation Size : mm Structure of prover section measurement Explosion-proof(YS-2000SD) Explosion-proof grade is DIIBT4 Size : mm 21

22 Portable Ultrasonic heat meter YSC-2000P Feature Feature High Accuracy Linearity:better than ±0.5%; Repeatability:better than ±0.2%; Flow Accuracy:better than ±1%; Heat Accuracy:better than ±2%; Non-intrusive measurement Non-intrusive and clamp-on transducer,no pressure drop and no pipe disturbing Application: 1. Cooling water temperature, flow, cooling energy measurement 2. Hot water temperature, flow, heat energy measurement 3. Heat exchanger temperature, flow, heat energy measurement 4. Freezer pouring water temperature, flow, cooling energy measurement 5. Boiler pouring water temperature, flow, heat energy measurement 6. Cooling water, alcohol, energy measurement, housing energy consumption, energy-saving and emission reduction, etc. Wide Measuring Range Several types transducer for selection measuring pipe size from DN15mm to DN6000mm High Reliability Adopt low voltage,multi-pulse technology to improve accuracy,reliability Large capability battery Built-in rechargeable Ni-MH battery provide over 20 hours of continuous operation Built-in printer Built-in printer mini thermal printer with instant and timing print function 22

23 Standard configuration Main body Medium Special Power supply wire Carrying case Size: mm transducer cable:5m 2 (Dust-proof, TM-1 waterproof, Anti-shock) stretcher :3m 2 Tape ruler :3m Thermal paper :30m 2 Coupling agent :110g High transducer temperature Items Performance and technical parameters 2*20 LCD Body type keyboard Micro-thermal printer with 24 characters output Data interface RS standard TS-1 type :DN15--DN100mm 2standard TM1 type :DN50-- Liquid temp<90 3 standard TL-1type DN300--DN6000mm Sensor 4.erature small type HTS-1:DN15--DN100mm Liquid temp< erature medium type:dn50--- Measuring media water, industrial effluent, acid-,alkali solution,, a variety of oils, and other can conduct sound wave fluids. Flow range 0~±32m/s Accuracy Better than ±1% Power supply Ni-MH battery can work more than 20 hours continually, or 220VAC Power consumption 1.5W Charge Intelligent charge,connect AC 220V directly, automatically cutoff. Weight Net weight:2.5kg(body) Remark Attaching High-strength protective box,it can used on bad condition 23

24 Dongtai Yanshan Instrument Factory Add:Hougang Industrial Park,Dongtai City,Jiangsu Province International Trade Department: Hangzhou Yanshan Import & Export Trade Co. Ltd Room 1532, 15th Floor, NO.176 North Qiutao Rd, Jianggan District, Hangzhou city,zhejiang province, China Postal NO TEL: FAX: