ABL1REM24062 regulated SMPS - single phase V input - 24 V output W

Transcription

1 Characteristics regulated SMPS - single phase V input - 24 V output W Product availability : Stock - Normally stocked in distribution facility Price* : USD Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power supply output current Operating position Nov 17, 2018 Phaseo Dedicated Power supply Regulated switch mode 150 W V AC single phase V DC V AC single phase 24 V DC 6.2 A Any position Vibration resistance 2 gn (f = Hz) conforming to EN/IEC mm (f = Hz) conforming to EN/IEC Name of test Conducted interference conforming to EN level 4 Conducted/Radiated emissions conforming to EN Class B Conducted/Radiated emissions conforming to EN/IEC Electrostatic discharges conforming to EN/IEC level 3 Emission conforming to EN/IEC Induced electromagnetic field conforming to EN/IEC level 3 Primary outage conforming to IEC Radiated electromagnetic field conforming to EN/IEC level 3 Rapid transient conforming to IEC level 3 Surge conforming to EN/IEC Complementary Input voltage limits Network frequency Inrush current Cos phi V V Hz Efficiency > 80 % Power dissipation in W Current consumption <= 50 Aat 115 V AC <= 100 Aat 230 V AC 37.5 W 5 Aat 100 V 2.5 Aat 240 V 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Input protection type Output voltage limits Integrated fuse (not interchangeable) V Line and load regulation +/- 3 % Holding time Output protection type >= 10 ms at 100 V >= 40 ms at 240 V Against overload, protection technology: x In Against overvoltage, protection technology: tripping if U > 1.25 x Un Against short-circuits, protection technology: automatic reset Thermal Connections - terminals Screw type terminals ground connection, connection capacity: 1 x 4 mm² AWG 12 Screw type terminals input connection, connection capacity: 2 x 4 mm² AWG 12 Screw type terminals output connection, connection capacity: 4 x 4 mm² AWG 12 Marking Mounting support CE Panel Reversible mounting bracket Operating altitude ft (2000 m) Output coupling Overvoltage category Meantime between failure [MTBF] Status LED Product weight Parallel Series II > hat 104 F (40 C) 1 LED green output voltage 1.61 lb(us) (0.73 kg) Environment Product certifications CCSAus CSA 22-2 No TUV UL 508 RCM EAC KC Environmental characteristic EMC conforming to EN EMC conforming to EN EMC conforming to EN EMC conforming to EN/IEC Safety conforming to EN/IEC Safety conforming to SELV IP degree of protection IP20 conforming to EN/IEC Ambient air temperature for operation Ambient air temperature for storage Relative humidity % F ( C) without derating factor F ( C) with derating factor F ( C) Overvoltage category Class I conforming to VDE Pollution degree 2 Dielectric strength 1500 V between input and ground 3000 V between input and output 500 V between output and ground Ordering and shipping details Category ABL1 DEDICATED POWER SUPPLIES Discount Schedule CP12 GTIN Nbr. of units in pkg. 1 Package weight(lbs) Returnability Y Country of origin CN 2

3 Offer Sustainability California proposition 65 WARNING: This product can expose you to chemicals including: Substance 1 Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm More information For more information go to Contractual warranty Warranty period 18 months 3

4 Dimensions Drawings Dimensions Dimensions in mm a L P Dimensions in in. a L P

5 Mounting and Clearance Clearance 5

6 Mounting and Clearance Mounting Way Mounting on Vertical Plane Mounting on Horizontal Plane 6

7 Mounting and Clearance Direct Mounting by 2 M4 x 20 Screws Dimensions in mm a 194 Dimensions in in a

8 Mounting and Clearance Mounting on the Back on ABL 1A01 Reversible Bracket by Three 4 mm Diameter Screws 8

9 Mounting and Clearance Mounting on ABL 1A02 Clip-on Mounting on 35 mm Rail 9

10 Mounting and Clearance Mounting by the Back Dimensions in mm b c Dimensions in in. b c

11 Connections and Schema Internal Wiring Diagram 11

12 Connections and Schema Series or Parallel Connection Series Connection Parallel Connection (1) 15 A/100 V Shottky diode 12

13 Performance Curves Derating Curves Mounting on Vertical Plane Mounting on Horizontal Plane 13

14 Performance Curves Load Limits Curve 14