Slim Relay G2RV. Model Number Structure. Model Number Legend. The World's First Industrial Slim Relay NTLP: WAITING FOR @

Transcription

1 Slim Relay 2R The World's First Industrial Slim Relay arge plug-in terminals for easy connection. ED indicator and mechanical flag to check operation. Transparent housing enables checking relay condition. Slim outline to save space. Push-in terminals and accessories for easy wiring. NTP: WAITIN FOR PHOTO Model Number Structure Model Number @ Auxiliary Type Designation S: Slim relay and socket combination 2. Wire Connection 7: Screw terminals 5: Push-in terminals 3. Relay ED 0: Without ED 1: ED indicator 4. Relay Pushbutton 0: Without pushbutton 1: ockable push-to-test 5. Input oltage Slim Relay 2R 3

2 Ordering Information ist of Models Classification Enclosure rating Input voltage Type of connection Contact form SPDT Plug-in terminals eneral-purpose Unsealed AC/DC Screw terminals 2R-S700 Push-in terminals 2R-S500 Relay and Socket Combinations Input voltage Screw terminals Push-in terminals DC 2R-S700- DC 2R-S500- DC 24 DC 2R-S DC 2R-S DC 24 AC/DC 2R-S AC/DC 2R-S AC/DC 48 AC/DC 2R-S AC/DC 2R-S AC/DC 0 AC 2R-S700-0 AC 2R-S500-0 AC 230 AC 2R-S AC 2R-S AC Specifications Input Ratings Rated voltage Rated current Operate voltage Release voltage Power consumption Input voltage AC DC % of rated voltage AC (A) DC (mw) % of rated voltage 50 Hz 60 Hz Approx. Approx. DC % % mw ±% 24 DC mw 24 AC/DC A 300 mw 48 AC/DC A 250 mw 0 AC A AC A --- Contact Ratings Number of poles oad Rated load Rated carry current Max. switching voltage Max. switching current Max. switching power Failure rate (reference value) Note: P level: λ 60 = 0.1 x -6 /operation 1 pole Resistive load (cosφ = 1) 6 A at 250 AC; 6 A at 30 DC 6 A 440 AC, 5 DC 6 A 1,500 A, 180 W ma at 5 DC 4 Slim Relay 2R

3 Characteristics Item Contact resistance Operate (set) time Release time Max. operating frequency Insulation resistance Dielectric strength Note: alues in the above table are the initial values. Approved Standard U 508 (File No. E41643) IEC/DE (EN 618) 0 mω max. 15 ms max. 5 ms max. Mechanical: 18,000 operations/hr Electrical: 1,800 operations/hr (under rated load) 1,000 MΩ min. (at 500 DC) 1 pole 4,000 AC, 50/60 Hz for 1 min between coil and contacts*; 1,000 AC, 50/60 Hz for 1 min between contacts of same polarity ibration resistance Destruction: to 55 to Hz, 0.50 mm single amplitude (1.0 mm double amplitude) Malfunction: to 55 to Hz, 0.50 mm single amplitude (1.0 mm double amplitude) Shock resistance Destruction: 1,000 m/s 2 Malfunction: 200 m/s 2 when energized; 0 m/s 2 when not energized Endurance Mechanical: 5,000,000 operations min. Electrical: 70,000 operations min. (at 1,800 operations/hr under rated load) Ambient temperature Operating: 40 C to 55 C (with no icing or condensation) Ambient humidity Operating: 5% to 85% Weight Approx. 21 to 35 g Overvoltage category III Pollution degree 2 Model Contact form Coil ratings Contact ratings Operations 2R-S Series SPDT to 48 DC 24 to 230 AC 250 AC 6 A (Res.) 30 DC 6 A (Res.) 440 AC 2 A (Res.) Contact form Coil ratings Contact ratings Operations 1 pole to 48 DC??? 24 to 230 AC??? 250 AC 6 A (Res.) 30 DC 6 A (Res.) 400 AC 2 A (Res.) 50,000 50,000 6,000 6,000 Slim Relay 2R 5

4 Accessories PC Interfaces ist of Models Model number Description Connection P2R-8-I-D For input use D-Sub P2R-8-I-F Flat P2R-8-O-D For output use D-Sub P2R-8-O-F Flat Specifications Input Rated voltage 30 AC/DC max. Current capacity 0.5 A per channel 2.0 A total current, power supply terminal Characteristics Ambient temperature Operating: 0 to 55 C Storage: 20 to 85 C Overvoltage category III Pollution degree 2 DeviceNet ist of Models I/O type Internal I/O common Number of I/O points I/O connections Inputs NPN (+ common) 16 PNP ( common) MI connector Outputs NPN ( common) PNP (+ common) Internal circuit power Supplied from communications connector. Rated I/O power supply voltage Model 24 DC DRT2-ID16M DRT2-ID16M-1 DRT2-OD16M DRT2-OD16M-1 NTP: WAITIN FOR PHOTO Specifications Models with 16-input/16-output Connector Models with 16-input Connector Models with 16-input/16-output Connector Models with 16-output Connector Item Internal I/O common I/O points ON voltage OFF voltage OFF current Input current ON delay time OFF delay time Maximum number of simultaneously ON inputs Circuits per common NPN DRT2-ID16M DRT2-ID16MX 16 inputs 17 DC min. (between each input terminal and terminal) 5 DC max. (between each input terminal and terminal) 1.0 ma max. PNP 6.0 ma max./point (at 24 DC) 3.0 ma max./point (at 17 DC) 1.5 ms max. 1.5 ms max /common DRT2-ID16M-1 DRT2-ID16MX-1 17 DC min. (between each input terminal and terminal) 5 DC max. (between each input terminal and terminal) Item Internal I/O common I/O points Rated output current Residual voltage NPN DRT2-OD16M DRT2-OD16MX 16 outputs eakage current 0.1 ma max. ON delay time 0.5 ms max. OFF delay time 1.5 ms max. Circuits per 16/common common PNP 0.3 A/point, 2 A/ common (See note 1.) 1.2 max. (0.3 A DC between each output terminal and terminal) DRT2-OD16M-1 DRT2-OD16MX max. (0.3 A DC between each output terminal and terminal) Note: Do not allow the total external load current to exceed 2 A. Do not allow the current for the terminal or terminal to exceed 1 A. 6 Slim Relay 2R

5 Relay Model Number Number of Poles 1: 1 pole 2. Terminals S: Push-In 3. Relay ED Blank: Without ED N: ED indicator ist of Models 4. Relay Pushbutton Blank: Without pushbutton I: ockable push-to-test 5. Contact Material Blank: AgSnIn AP: AgSnIn + old plating 6. Rated Coil oltage Model number 2R-1-S DC 2R-1-S DC21 2R-1-S DC48 Replacement for 2R-S7@@/5@@ DC 2R-S7@@/5@@ DC24 2R-S7@@/5@@ AC/DC24 2R-S7@@/5@@ AC/DC48 2R-S7@@/5@@ AC0 2R-S7@@/5@@ AC230 Accessories (Order Separately) Crossbars Model Number egend P2RM Number of Poles 020: 2 poles 040: 4 poles 0: poles 2. Color R: Red B: Blue BK: Black Model number Poles Color P2RM-020@ 2 Red (R) P2RM-040@ 4 Blue (B) P2RM-0@ Black (BK) Slim Relay 2R 7

6 Plastic abels for 2R Sockets Model number Quantity Color R99-15 for 2R 600 labels (minimum order) White abels (Stickers) for 2R Sockets Model number Quantity Color R99-16 for 2R sheets 448 labels = White 4,840 lables (minimum order) NTP: WAITIN FOR PHOTO Separating Plates Model number Quantity Description P2R-S 50 plates Isolation between adjacent (minimum order) Relays at point Connector Cable for I/O Relay Terminals Connectors with Cable (1:1) Model Applicable cable Connectable models DRT2-ID16M 79-I@C 7TC-ID16 7TC-IA16 Remarks For I/O Relay Terminal inputs DRT2-ID16M No applicable models. DRT2-OD16M 79-O@C 7TC-OC16/OC08 70D-SOC16/SOC16 70D-FOM16/FOM16 70A-ZOC D-SOC08 70R-SOC08 For I/O Relay Terminal outputs DRT2-OD16M-1 79-I@C 7TC-OC16-1 For I/O Relay Terminal outputs 79-O@C 70D-SOC D-FOM A-Z0C16-4 For I/O Relay Terminal outputs NTP: WAITIN FOR PHOTO 8 Slim Relay 2R

7 Connections PC Interfaces P2RC-8-I-D NTP: WAITIN FOR PHOTO NTP: WAITIN FOR P2RC-8-I-F NTP: WAITIN FOR PHOTO NTP: WAITIN FOR P2RC-8-O-D NTP: WAITIN FOR PHOTO NTP: WAITIN FOR P2RC-8-O-F NTP: WAITIN FOR PHOTO NTP: WAITIN FOR Slim Relay 2R 9

8 Slim Relay 2R DeviceNet DRT2-ID16M(X) DRT2-ID16M(X)-1 DRT2-OD16M(X) DRT2-OD16M(X)-1 1 Input (0 to 15) 1 + CAN H DRAIN CAN DC static converter (non-isolated) CAN H DRAIN CAN CAN H DRAIN CAN CAN H DRAIN CAN DRT2-ID16M(X) DRT2-ID16M(X)-1 DRT2-OD16M(X) DRT2-OD16M(X)-1 24 DC DC DC DC Photocoupler Internal circuits Physical layer DC static converter (non-isolated) oltage stepdown Output (0 to 15) Internal circuits Physical layer DC static converter (non-isolated) Input (0 to 15) Photocoupler Internal circuits Physical layer Physical layer DC static converter (non-isolated) Internal circuits Photocoupler Output (0 to 15) Photocoupler oltage stepdown

9 Dimensions Note: All units are in millimeters unless otherwise indicated. Complete Unit 2R-S700 Input circuit 6.7 max A2 NTP: WAITIN FOR 6.2 max max. A1 24 DC Terminal Arrangement/ Internal Connections (Top iew) A2 A1 Other Coil oltage Terminal Arrangement/ Internal Connections (Top iew) Five, M A2 A1 DC Terminal Arrangement/ Internal Connections (Top iew) Slim Relay 2R

10 2R-S500 Input circuit 6.7 max. 6.2 max A2 A1 NTP: WAITIN FOR max. 24 DC Terminal Arrangement/ Internal Connections (Top iew) A2 A1 Other Coil oltage Terminal Arrangement/ Internal Connections (Top iew) A2 A1 DC Terminal Arrangement/ Internal Connections Single Relay 2R-I-S 5.2 max max. NTP: WAITIN FOR max. Input circuit A1 A2 Terminal Arrangement/ Internal Connections (Bottom iew) Slim Relay 2R

11 Installation Tools A flat-blade screwdriver should be used to mount the cables. Applicable Screwdriver Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.) Flat-blade, Parallel-tip 2.5 dia. (3.0 mm max.) Flat-blade, Flared-tip Examples: FACOM AEF E (AEF. 3 75E) ESSE No (-) (No (-)3 0) WAO 2-9 WIHA 260/ (260/3 50) *Chamfering the tip of the driver improves insertion when used as an exclusive tool. Applicable Wires Applicable Wire Sizes 2R-S700 Series 2R-S500 Series Cannot be used. Property Requirements Cross-section with 0.5 to 2.5 mm 2 : Standard/solid (without ferrules) clamping yoke technology 0.5 to 2.5 mm 2 : Standard wires with ferrules with plastic collar 0.5 to 2.5 mm 2 : Standard wires with ferrules without plastic collar 4 mm 2 : Solid Stripping length: 7 mm Property Cross-section with push-in technology Requirements 0.5 to 2.5 mm 2 : Standard/solid (without ferrules) 0.5 to 1.5 mm 2 : Standard wires with ferrules with plastic collar 0.5 to 2.5 mm 2 : Standard wires with ferrules without plastic collar 4 mm 2 : Solid Stripping length: mm Slim Relay 2R

12 Wiring Use wires of the applicable sizes specified above. The length of the exposed conductor should be 7 mm for a 2R-S700 series Relay, mm for a 2R-S500 series Relay. 2R-S700 NTP: WAITIN FOR 7 mm 2R-S500 Remove wire. Wiring Procedure mm Fig. 1 Exposed Conductor ength NTP: WAITIN FOR NTP: WAITIN FOR Remove screwdriver. Wiring NTP: WAITIN FOR Insert the exposed conductor into the connection hole. NTP: WAITIN FOR No other tools are required. Remove NTP: WAITIN FOR Insert the specified screwdriver into the release hole. Slim Relay 2R

13 Precautions Precautions for Connection Do not move the screwdriver up, down, or from side to side while it is inserted in the hole. Doing so may cause damage to internal components (e.g., deformation of the clamp spring or cracks in the housing) or cause deterioration of insulation. Do not insert the screwdriver at an angle. Doing so may break the side of socket and result in a sort-circuit. NTP: WAITIN FOR Do not insert two or more wires in the hole. Wires may come in contact with the spring causing a temperature rise or be subject to sparks. (There are two wiring holes for each terminal.) NTP: WAITIN FOR Insert the screwdriver along the hole wall as shown below. NTP: WAITIN FOR eneral Precautions Use the clip to prevent relays floating or falling out of the socket. Do not use the product if it has been dropped on the ground. Dropping the product may adversely affect performance. Confirm that the socket is securely attached to the mounting track before wiring. If the socket is mounted insecurely it may fall and injure the operator. Ensure that the socket is not charged during wiring and maintenance. Not doing so may result in electric shock. Do not pour water or cleansing agents on the product. Doing so may result in electric shock. Do not use the socket in locations subject to solvents or alkaline chemicals. Do not use the socket in locations subject to ultraviolet light (e.g., direct sunlight). Doing so may result in markings fading, rust, corrosion, or resin deterioration. Do not dispose of the product in fire. Removing from Mounting Rail To remove the socket from the mounting rail, insert the tip of screwdriver in the fixture rail, and move it in the direction shown below. NTP: WAITIN FOR If lubricating liquid, such as oil, is present on the tip of screwdriver, the screwdriver may fall out resulting in injury to the operator. Insert the screwdriver into the bottom of the hole. It may not be possible to connect cables properly if the screwdriver is inserted incorrectly. Slim Relay 2R 15

14 A DIMENSIONS SHOWN ARE IN MIIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. XXX-XX-XX In the interest of product improvement, specifications are subject to change without notice. OMRON REAY & DEICES Corporation eneral Purpose Relay Division Marketing & Product Engineering Department, Sugi, Yamaga-city, Kumamoto-Pref., Japan Tel: (81) /Fax: (81) Printed in Japan M (98) (O)