Accessory Name Part Number Description. Accessory Name Part Number Description. Single Dock (AD20)

Transcription

1 RFID-Ready Snap-On Adapter IP30 IP30Axxxxxx Snaps onto the bottom of CK3 Series devices as a passive UHF RFID handle. Docks & Modules Single Dock (AD20) Multi-Dock, Ethernet (AD21) Multi-Dock, Charge Only (AD22) USB Host and Client Support with bay to charge an auxiliary battery pack. Requires Power Supply and country specific AC power cord. Optional: Single Dock Ethernet Modules. Not compatible with CK7x battery ( ) 4-slot Ethernet dock provides extra port allowing for ability to link up to three (3) multidocks. Requires Power Supply and country-specific AC power cord. Allows for charging up to 4 devices. Requires power supply and countryspecific power cord. Vehicle Dock (AV10) Securely holds CK3 and provides power. Cabled RS232 (5V pwr on pin 9) or USB Host support is also available. Requires use of Intermec RS232 Serial cable (p/n ) or Intermec USB cable VE The CK3 Series vehicle dock uses the same mounting system (p/n ) and vehicle power kits Vehicle Holder Securely holds CK3 Single Dock Ethernet Module Ethernet Module interfaces with USB Host connector on Single Dock. IP30 Vehicle Holder Non-Powered vehicle holder to hold CK3 with IP30 attached. 1

2 Holsters & Handles Standard Belt Holster without scan handle CK3X / CK3R rugged lightweight holster with belt designed for use with handheld applications without scan handle. Standard Belt Holster with scan handle CK3X / CK3R rugged lightweight holster with belt designed for use with handheld applications WITH scan handle. Standard Belt Holster CK3 rugged lightweight holster with belt designed for use with handheld applications with scan handle. Scan Handle Customer installable scan handle (replaces the hand strap) Protective Boot CK3B Customer installable rubber boot compatible with or without handle, not compatible with snap-on adapters. Protective Boot CK3R customer installable rubber boot compatible with or without handle, not compatible with snap-on adapters. Protective Boot CK3X customer installable rubber boot compatible with or without handle, not compatible with snap-on adapters. 2

3 Snap-On Adapters RS-232 Snap-On Adapter (AA21) Audio Snap-On Adapter (1007AA01) Snap-on adapter for enabling RS232 support from bottom of CK3. Must order cables separately. Adapter provides DB9M connector and 5V power on pin-9 for tethered scanners. CK3 Snap-on audio adapter. Provides quick disconnect audio jack for use with wired headset. Power Snap-On Adapter (AA23) Vocollect Snap-On Adapter (AA23) Snap-on power adapter recommended for in-field charging solutions not requiring vehicle dock. Supports use of auto power charger p/n# or AC power supply Snap-on Vocollect audio adapter for wired head set support Batteries & Chargers Standard Capacity Battery Pack (AB17) One (1) standard rechargeable 7.4 watt hours (2000 mah) battery CK3R ships with (1) Extended Capacity Battery Pack (AB18) One (1) standard rechargeable 18.5 watt hours (5100 mah) battery pack CK3X ships with (1) Extended Capacity Smart Battery Pack (1001AB01) One (1) standard rechargeable 18.5 watt hours (5200 mah) smart battery pack provides battery health data Quad Battery Charger (AC20) Charges four CK3 Series battery packs. Requires Power Supply and country-specific AC power cord. Not compatible with CK7x battery ( ) 3

4 Cables USB-A to USB-microB, 1M Use with CK3 Series Single Dock ( ) or Vehicle Dock USB Adapter Cable for ActiveSync (VE ) connection to PC USB port. USB / Charging Cable PHOTO PENDING Use with CK3X / CK3R for Active Sync and/or direct charging without the need for a dock or adapter (note charge times will be longer). Power Supplies & Adapters Universal Wall Power Supply Use with CK3X / CK3R, plugs directly into the heel for charging. Ships with interchangeable country plugs Universal Power Supply, 12VDC,Output (AE14) Use with CK3 Series Multi-docks ( & ). Order countryspecific AC power cord separately. Universal Power Supply, 12VDC/30W,Output (AE18) Use with CK3 Series Single Dock ( ) or CK3 Series Quad Battery Charger ( ). Order country specific AC power cord separately. N. America / EU only Universal Power Supply, 5V (AE23) AC power supply with barrel jack. Allows for charging CK3 Series devices without a dock. Requires use of CK3 Series Power Snap-on Adapter ( ). Order country-specific AC power cord separately. 4

5 Power Supplies & Adapters Auto Power Adapter (AE33) Replacement Parts Auto Cigarette Lighter Adapter with barrel jack that allows for charging CK3 handheld. Requires use of CK3 Series Power Snap-on Adapter ( ) Stylus Replacement Kit Contains five (5) sets of stylus and coiled tether for CK3B Stylus Replacement Kit Contains five (5) sets of stylus and coiled tether for CK3X / CK3R Handstrap Replacement Kit Contains five (5) sets of Handstraps for CK3B includes mounting hardware Hand strap Replacement Kit Contains five (5) sets of hand straps for CK3X / CK3R includes mounting hardware Screen Cleaner Kit, Pre-Moist Wipes Includes 24 pre-moistened, nonabrasive, non-streaking 4x7 wipes. Screen Protector, 10 Each Contains ten (10) self-adhesive screen protectors. 5

6 FlexDock Supplies Quad Dock-Ethernet DX4A Accommodates four mobile computers. Includes power supply, North American Power Cord. Features 100Base-T Ethernet connectivity; provides 2 RJ45 jacks for upstream connections and downstream daisy-chain connections of up to 10 docks. Quad Dock-Ethernet DX4A Accommodates four mobile computers. Includes power supply. Order power cord separately. Features 100Base-T Ethernet connectivity; provides 2 RJ45 jacks for upstream connections and downstream daisy-chain connections of up to 10 docks. Quad Dock-Charge Only DX4A Accommodates four mobile computers CHARGE ONLY. Includes power supply and North American Power Cord. Quad Dock-Charge Only DX4A Accommodates four mobile computers CHARGE ONLY. Includes power supply. Order Power Cord separately. 4-Position Battery Charger DX2A2BB10 Includes two auxiliary pack charge cups, capable of supporting four battery packs. Includes power supply and North American Power Cord. 4-Position Battery Charger DX2A2BB00 Includes two auxiliary pack charge cups, capable of supporting four battery packs. Includes power supply. Order Power Cord separately. 8-Position Battery Charger DX4A2BBBB10 Includes four auxiliary pack charge cups, capable of supporting eight battery packs. Includes power supply and North American Power Cord. Copyright 2012 Intermec Technologies Corporation. All rights reserved. Intermec is a registered trademark of Intermec Technologies Corporation. All other trademarks are the property of their respective owners A 10/12 8-Position Battery Charger DX4A2BBBB00 Includes four auxiliary pack charge cups, capable of supporting eight battery packs. Includes power supply. Order Power Cord separately. 6