Velocitykvm. Multi-Mode Fiber Extension Systems

Transcription

1 Velocitykvm Multi-Mode Fiber Extension Systems An overview of the Velocitykvm Dual-link and Single-link, Multi-Mode Fiber Extension Systems -,, 8,, 8,, & 8 Milford, Connecticut, USA

2 Copyright Notice Copyright 0. All rights reserved. Printed in the U.S.A. Thinklogical LLC 00 Washington Street Milford, Connecticut 0660 U.S.A. Telephone All trademarks and service marks are property of their respective owners. Subject: Velocity Multi-Mode Fiber Extension System Product Overview Revision: B, July 0 Powered by MRTS Technology HOW TO CONTACT US: Telephone Telephone Product Support: Contact Product Support by telephone in Milford, CT at The support lines are manned Monday through Friday, 8:0am to :00pm, Eastern Time Zone. Telephone Sales: Contact our expert sales staff by telephone in Milford, CT at or, if in the continental US, you may use our toll-free number We are here Monday through Friday from 8:0am to :00pm, Eastern Time Zone. Ask for your representative s direct dial phone number when you call. International Sales: Please contact our US sales staff in Milford, CT at We are here Monday through Friday, 8:0am to :00pm, Eastern Time Zone (same as New York City). If leaving a voice message please let us know the best time to call back so we may reach you at your convenience. Our switchboard attendant will direct your call during regular business hours. We have an automated attendant answering our main telephone switchboard after regular business hours and on holidays. You can leave a voice message for any individual at any time. Our sales representatives have direct numbers to speed up your next call to us. Thinklogical is staffed Monday through Friday from 8:0am to :00pm, Eastern Time Zone. We will do our best to respond to your inquiries promptly. Please use the following addresses for your various needs: info@thinklogical.com Information on Thinklogical and our products. sales@thinklogical.com Sales Department - orders, questions or issues. support@thinklogical.com Product support, technical issues or questions, product repairs and request for a Return Merchandise Authorization (RMA) number. Fax Our company facsimile number is Please indicate the nature of the fax on your cover sheet and provide return contact information. PHONE: WEBSITE: support@thinklogical.com Visit us online at for more product information, current updates and the complete line of Thinklogical products.

3 The Logical Solution Velocity KVM Extension Systems are designed for high performance visual applications that require video as well as peripheral support. The system allows users, via optical fiber, to station and operate a digital monitor(s) and peripherals from just a few meters away to up to 0 kilometers away from the controlling computer, securely and without loss of resolution. Velocity KVM products are ideally suited for a wide range of applications in the broadcast and post-production field, as well as command and control centers, universities, large scale digital signage and other commercial KVM applications. The Velocity KVM Multi-Mode Fiber Extender standard model from Thinklogical includes: Multi-mode fiber for extension distances up to 0 meters Two DVI Displays Supports USB HID, USB. and (optional) USB.0 (up to 80 Mbps) The Future of Access and Control System Features Velocitykvm- Multi-Mode Fiber KVM Extension System DVI Two Display Powered by MRTS Technology Transmitter enter Each Velocity KVM Multi-mode Fiber system includes the following features: Supports all single-link DVI video resolutions (Velocity KVM Extension. System- supports one single-link DVI or RGB and all single-link DVI resolutions). 6. Gbps signal transmission via fiber optic cable; No RF interference. Requires one, two, three, four or five fiber optic cables, depending on application. Flawless image quality with no frame dropping. Local KVM connections on transmitter. Additional video output(s) on the receiver. Extends KVM audio and serial signals up to 0 meters using standard multi-mode fiber; 000 meters using esx+ multi-mode fiber; 0 kilometers using single-mode fiber. USB HID compliant, -port hub. Full USB. compliant, -port hub. USB.0 compliant (high speed 80 Mbps, port hub). Stereo Emitter BNC connections. DDCB/EDID complaint. Fully compatible with all of Thinklogical s VX Router line of products. Full keyboard and mouse emulation through the transmitter. Full duplex stereo audio. Simple plug and play.

4 Velocitykvm- Multi-Mode Fiber Extension System Single Head, Single Link DVI Local DVI OUT STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM Transmitter s local devices receptacles and connect the optional local DVI display to the Transmitter s DVI OUT Port. Ensure all system functions are operating properly. USB HID or PS PWR FOL CP CLINK L L DVI IN DVI OUT SER IAL PORT STEREO EMITTER INPUT LINE IN MIC OUT HID P S LOCAL FROM CPU USB. PS/ or USB connectors USB HID UPDATES DEV HOST CTRL CAUTION! Replace with same type and rating fuse. USE ONLY WITH 0V FUSE 00-0V-,0.A, 0/60 Hz T A,0VAC USB.0 Option DVI IN STEP : Connect your Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown. L: Data Tx to Rx and Video L: Data Rx to Tx Audio IN PS/ Keyboard PS/ Mouse USB. (Kybd/Mouse) STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). STEP : Connect the DVI and KVM cables between the Source CPU and the VelocityKVM Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. PWR L L FOL SER IAL PORT DVI OUT DDC DVI OUT STEREO EMITTER USB.0 USB HID USB. OUTPUT LINE OUT MIC IN P S USB HID or PS U P D A T E S HOST CTRL CAUTION! Replace with same type and rating fuse. 00-0V-,0.A, 0/60 Hz T A,0VAC USE ONLY WITH 0V FUSE VELOCITY-_Manual_QSG USB.0 Option DVI OUT DDC DVI OUT STEP : Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON.

5 Velocitykvm- Multi-Mode Fiber Extension System Single Head, Single Link RGB/DVI Local RGB/DVI OUT STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM Transmitter s local devices receptacles and connect the optional local RGB/DVI display to the Transmitter s RGB/DVI OUT Port. Ensure all system functions are operating properly. USB HID or PS PWR FOL CP CLINK L L RGB/DVI IN RGB/DVI OUT SER IAL PORT STEREO EMITTER INPUT LINE IN MIC OUT HID P S LOCAL FROM CPU USB. PS/ or USB connectors USB HID UPDATES DEV HOST CTRL CAUTION! Replace with same type and rating fuse. USE ONLY WITH 0V FUSE 00-0V-,0.A, 0/60 Hz T A,0VAC USB.0 Option RGB/DVI IN STEP : Connect your Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown. L: Data Tx to Rx and Video L: Data Rx to Tx Audio IN PS/ Keyboard PS/ Mouse USB. (Kybd/Mouse) STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). STEP : Connect the RGB/DVI and KVM cables between the and the VelocityKVM Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. PWR L L FOL SER IAL PORT RGB/DVI OUT DDC RGB/DVI OUT STEREO EMITTER USB.0 USB HID USB. OUTPUT LINE OUT MIC IN P S USB HID or PS U P D A T E S HOST CTRL CAUTION! Replace with same type and rating fuse. 00-0V-,0.A, 0/60 Hz T A,0VAC USE ONLY WITH 0V FUSE VELOCITY-_Manual_QSG USB.0 Option RGB/DVI OUT DDC RGB/DVI OUT STEP : Connect the destination RGB/DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON.

6 Velocitykvm-8 Multi-Mode Fiber Extension System Dual-Link DVI Local Dual-Link DVI OUT USB HID or PS Fiber-Optic Cables: L: Data Tx to Rx and Video Primary L: Data Rx to Tx L: Video Secondary USB.0 Option Dual-Link DVI IN Local Dual-Link DVI OUT Audio IN PS/ Keyboard PS/ Mouse *STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). USB. (Kybd/Mouse) STEP : Connect the Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown. STEP : * STEP : Connect the destination Dual-link DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. STEP : Connect the Dual-link DVI and KVM cables between the and the VelocityKVM Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. STEP : If desired, connect an optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM Transmitter s local devices receptacles and connect the optional local dual-link DVI display to the Transmitter s Dual-link DVI OUT Port. Ensure all system functions are operating properly. Dual-Link DVI OUT USB.0 Option Dual-Link DVI OUT DDC USB HID or PS VELOCITY-8_Manual_QSG 6

7 Velocitykvm- Multi-Mode Fiber Extension System DVI Two Display Local DVI OUT Local DVI OUT USB HID or PS Fiber-Optic Cables: L: Data Tx to Rx and Video L: Data Rx to Tx L: Video USB.0 Option DVI IN DVI IN Audio IN PS/ Keyboard PS/ Mouse *STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). USB. (Kybd/Mouse) STEP : Connect the Multi-Mode Fiber Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown. STEP : * STEP : Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. STEP : Connect the DVI and KVM cables between the and the VelocityKVM Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM Transmitter s local devices receptacles and connect the optional local DVI displays to the Transmitter s DVI OUT Ports &. Ensure all system functions are operating properly. USB.0 Option DVI OUT DDC DVI OUT DDC USB HID or PS VELOCITY-_Manual_QSG 7

8 Velocitykvm-8 Multi-Mode Fiber Extension System Dual- & Single-Link DVI, Two Display Local Dual-Link DVI OUT Local DVI OUT USB HID or PS Fiber-Optic Cables: L: Data Tx to Rx and Video Primary L: Data Rx to Tx L: Video Secondary L: Video USB.0 Option Dual-Link DVI IN DVI IN Audio IN PS/ Keyboard PS/ Mouse *STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). USB. (Kybd/Mouse) STEP : Connect the four Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown: L to L, L to L, etc. STEP : * STEP : Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. STEP : Connect the DVI and KVM cables between the and the VelocityKVM Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM Transmitter s local devices receptacles and connect the optional local DVI displays to the Transmitter s DVI OUT Ports &. Ensure all system functions are operating properly. USB.0 Option Dual-Link DVI OUT DVI OUT USB HID or PS VELOCITY-8_Manual_QSG 8

9 Velocitykvm- Multi-Mode Fiber Extension System Four DVI Displays STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM- Transmitter s local devices receptacles. Ensure all system functions are operating properly. USB HID or PS Fiber-Optic Cables: L: Data Tx to Rx and Video L: Data Rx to Tx L: Video L: Video L: Video USB.0 Option DVI IN DVI IN DVI IN DVI IN Audio IN PS/ Mouse PS/ Keyboard USB. (Kybd/Mouse) *STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). STEP : Connect the five Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown; L to L, L to L, etc. STEP : * STEP : Connect the destination DVI and KVM devices to the VelocityKVM- Receiver using standard cables. Ensure the devices are turned ON. STEP : Connect the DVI and KVM cables between the Source CPU and the VelocityKVM- Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. USB.0 Option DVI OUT DVI OUT DVI OUT USB HID or PS DVI OUT DVI OUT DVI OUT DVI OUT DVI OUT VELOCITY-_Manual_QSG 9

10 Velocitykvm- Multi-Mode Fiber Extension System Three DVI Displays USB HID or PS Fiber-Optic Cables: L: Data Tx to Rx and Video L: Data Rx to Tx L: Video L: Video USB.0 Option DVI IN DVI IN DVI IN Audio IN PS/ Keyboard PS/ Mouse *STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). USB. (Kybd/Mouse) STEP : Connect the Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown. STEP : * STEP : Connect the destination DVI and KVM devices to the VelocityKVM Receiver using standard cables. Ensure the devices are turned ON. STEP : Connect the DVI and KVM cables between the and the VelocityKVM Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM Transmitter s local devices receptacles. Ensure all system functions are operating properly. USB.0 Option DVI OUT DVI OUT DVI OUT USB HID or PS VELOCITY-_Manual_QSG 0

11 Velocitykvm-8 Multi-Mode Fiber Extension System Two Dual-Link DVI Displays Local Dual-Link DVI OUT (optional) Local Dual-Link DVI OUT (optional) USB HID or PS Fiber-Optic Cables: L: Data Tx to Rx and Video Primary L: Data Rx to Tx L: Video Secondary L: Video Primary L: Video Secondary USB.0 Option DVI IN Dual-Link DVI IN Dual-Link Audio IN PS/ Mouse PS/ Keyboard USB. (Kybd/Mouse) *STEP : Ensure that position (0) on both the Tx and Rx units. switches ON (). STEP : Connect the five Multi-Mode Fiber-Optic Cables between the Transmitter and Receiver units (up to 000 meters) as shown; L to L, L to L, etc. STEP : * STEP : Connect the destination Dual-Link DVI and KVM devices to the VelocityKVM-8 Receiver using standard cables. Ensure the devices are turned ON. STEP : Connect each of the Dual-Link DVI and KVM cables between the and the VelocityKVM-8 Transmitter using the cables supplied in KIT R. Ensure the CPU is turned ON. STEP : If desired, connect your optional local keyboard & mouse by inserting the PS/ or USB HID connectors into the VelocityKVM-8 Transmitter s local devices receptacles and connect the optional local Dual-Link DVI displays to the Transmitter s Dual-Link DVI OUT Ports &. Ensure all system functions are operating properly. USB.0 Option DVI OUT Dual-Link DVI OUT Dual-Link DVI OUT Dual-Link DVI OUT Dual-Link USB HID or PS VELOCITY-8_Manual_QSG

12

13 Technical Specifications Each Thinklogical Velocity KVM system is designed to the following specifications: Copper Connectors Transmitter Video System,,8 DVI-D (); System, DVI-D () Audio MIC.mm Jack Audio LINE.mm Jack Serial Port DB9 Female USB.0 (HID) USB B USB. USB B USB.0 USB B USB Local Kybd. USB A USB Local Mouse USB A PS Keyboard MiniDIN 6 Female PS Mouse MiniDIN 6 Female PS Local Kybd. MiniDIN 6 Female PS Local Mouse MiniDIN 6 Female Stereo Emitter D BNC Female Software Updates USB B () Fiber Connectors LC, SC or ST for Multi-mode Receiver Video System,, 8 DVI-D (); System, DVI-D () Audio MIC.mm Jack Audio LINE.mm Jack Serial Port DB9 Male USB.0 (HID) USB A () USB. USB A () USB.0 USB A () PS Keyboard MiniDIN 6 Female PS Mouse MiniDIN 6 Female Stereo Emitter D BNC Female Software Updates USB B Fiber Connectors LC, SC, or ST for Multi-mode Electrical Cables (supplied with system) CBL MR, DVI-D M to M: -, -, -(), -8, -(), - () CBL MR, HD to DVI-D: - CBL MR, DVI-D Male to Male, Dual-Link: -8, -8, -8 () KIT R, Audio Kit, 6FT: each -, -, -8, -, -8, -, -, -8 AC Power cords (model determined by destination) KIT R Audio Kit contains the following: CBL FR 6 pin MiniDIN Male to Male Cable, 6FT () CBL FR USB A-B Cable, 6FT () CBL FR.mm Male to.mm Male Plug, 6FT () CBL FR DB9 Male to DB9 Female Cable, 6FT () CBL FR BNC Male to BNC Male Cable, 0Ω, 6FT () Video Resolution DVI D All Single-Link and Dual-Link Resolutions Optical Cable Fiber Type: 0 or 6. micron, Multi-mode Required:,,, or depending upon application. (Not supplied, but available through Thinklogical ) Optical Distance Up to 0 meters with Type OM Up to 0 meters with Type OM Up to 000 meters with Type OM Operating Temperature and Humidity 0 to 0 C ( to F), % to 9% RH, non-condensing Dimensions Height:.7 (.cm) ±.09 ;.00cm Depth: 8.0 (.8cm)* ±.09 ;.00cm Width: 7.9 (.cm) ±.09 ;.00cm Weight Weight: lbs (.99kg) each Shipping Weight: 7 lbs (. kg) Transmitter and Receiver Supply Voltage 00-0 VAC, 7-6 Hz, Universal AC power supply Power Consumption: 0 Watts per unit Compliance: Approvals for US, Canada, and European Union Warranty: months from date of purchase. Extended warranties available. PHONE: Visit us online at for more WEBSITE: product information, current updates and the support@thinklogical.com complete line of Thinklogical products. Copyright 0. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.