10G SFP+ Checker 2012 VER B. Page 1 of 9 3F-5, No. 30 Taiyuan Street, Chupei City, Hsinchu County 302, Taiwan

Transcription

1 10G SFP+ Checker Page 1 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

2 Table of Contents 1. Description and Features Specification Element & Operating Instructions Maintenance Warranty Ordering Information Service Contacts... 8 Page 2 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

3 1.1 Description The 10G SFP+ Checker can be a help you to read the internal memory EEPROM of the SFP+ and displays details EEPROM contents registered into EEPROM such as the Part Number, Vendor Name, wavelength, description, and range. With an DDM SFP+ that is with digital diagnostics, the SFP Checker can be used to monitor the all DDM information. With Meter Module, you can measure the real output power of SFP. The 10G SFP+ Checker is an instrument which combines the Serial Pattern Generator, Bit Error Rate Analyzer, and Optical Power Meter within a compact size for both optical telecommunication and data communication. It provides common transmission rate for 8x Fiber Channel, OC-192, and 10G Ethernet. The optical power can be measured by plugging in an optional optical sensor module. The friendly graphic user interface (GUI) provides clear monitoring for bit error rate, bit error counter, timer, SFP status, optical power from the sensor module and selection of data rate and PRBS. 1.2 Features Pocket size design. No warm up time required. Connects to a standard PC / laptop via USB connection 1 port for duplex LC SFP+. SFP Plug-In Module with SC female connector for optical power measurement. Automatic wavelength selection based on the EEPROM data from SFP. Wide range AC adaptor. Full function GUI Popular USB connection. Page 3 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

4 1.3 Application SFP transceiver qualification to verify correct SFP To confirm proper transmit and receive signal levels Optical transmitting power measurement. Optical reference signal. Bit error rate test. To verify proper encoding during the manufacturing 2. Specification Main Frame SFP ports Standard SFP 20pin with Cage Operating Temp. 0 ~ 50 Storage Temp. -10 ~ 70 Transmission rate 8.5 Gbps ~ 11.3 Gbps Power Supply Weight 100~220VAC to 3.3VDC adaptor 0.17 Kg Optical Sensor Input Wavelength Input Optical Power Range Resolution Accuracy 850 nm, 1300 nm, 1270nm~1610nm -40 dbm ~ +5 dbm 0.01 db ±0.3dB under calibrated condition Page 4 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

5 3. Elements & Operating Instructions Elements: 1. DC Power Connector : DC 3.3V Power Supply. 2. USB interface : Connect to PC. 3. SFP+ Pug-In Cage (port #1): SFP Plug-In port, for bit error rate test. 4. Optical Sensor cage (port#4): Optical Sensor module plug-in port, for optical power measurement. Page 5 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

6 Operating Instructions: 1. The 10G SFP+ Checker is powered by 3.3 VDC adaptor. 2. Connect the SFP Checker to the PC by connecting the USB interface. 3. Plug in the SFP Transceiver Module in port #1 and an LED will light in Red 4. Connect fiber patch cord with 10dB attenuation from transmitter side to receiver side. Then the LED turns Green. 5. Select com port and click OPEN COM. 6. Select Data Rate and Pattern. 7. Click STAR and then click RESTART to execute bit error rate test function. 8. Click STOP to stop the bit error rate test. 9. Plug an Optical Sensor Module in port #4 to measure optical power. Click STOP before the optical power measurement. 10. The RESTART button is to clear and re-measure the bit error rate. The RESET TIME button is to reset the timer. Page 6 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

7 4. Maintenance Like any other type of electronic equipment, this SFP checker should be kept away from water, high humidity, dust, electricity, and environments of extreme temperatures. Do not drop this tool on any hard surface. Internal modification of any of the SFP checker components can cause a malfunction and will invalidate the manufacturer s warranty. 5. Warranty The manufacturer warrants this product to be free of defects in workmanship and materials for a period of 1 year after purchase. This warranty is solely limited to the repair or replacement of the original parts. All other costs are the sole responsibility of the owner. This warranty does not cover any defects, damage, or deterioration due to misuse, alteration, or negligence. 6. Ordering Information: Part Number Media Description S S SFP Checker Main Frame 8.5Gbps ~ 11.3Gbps, With 100~220VAC to 3.3VDC adaptor SFP Checker Optical Sensor Module Part Number Connector Mode Wavelength Range S SC MM 850nm/ 1300nm -40dBm ~ +5dBm S SC SM 1310/ 1490/ 1550nm -40dBm ~ +5dBm S SC SM 1270nm~1450nm (CWDM) -40dBm ~ +5dBm S SC SM 1470nm~1610nm (CWDM) -40dBm ~ +5dBm S SC SM 1270 / 1310 / 1490 / 1550 / 1625nm -40dBm ~ +5dBm S SC SM 1270~1610nm (CWDM) -40dBm ~ +5dBm S SC SM / MM 850nm, 1300nm, 1270~1610nm (CWDM), 1625 nm -40 dbm ~ +5 dbm Page 7 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

8 7. Service Contacts Please contact us : 3F-5, No. 30 Taiyuan Street, Chupei City, Hsinchu County 302, Taiwan TEL: FAX: sales@liverage.com.tw Page 8 of 9 Copyright 2012, reserves the right to modify specifications without prior notice

9 Record of Revisions Rev. Date Description of Change 2012 VER A VER B Page#1 & Page#7 10 Gbps relative information added MF S S S S Page 9 of 9 Copyright 2012, reserves the right to modify specifications without prior notice