Performance specifications

Transcription

1 Industrial Automation RU VersaRAK IPm2m RU and Datalogger Sixnet's IPm2m industrial Remote erminal Unit (RU) gives you a competitive edge, realtime information anytime and anywhere allows you to make fast, costeffective decisions. his industrial automation product is the frontend that brings realtime data from distributed locations to the Internet or into your central information server. Industrial PowerPC Operating system Dynamic memory (RAM) Program memory (Flash) Retained memory (RAM) Functions Ethernet Ports Connection Protocols RS485 Port A RS232 Port B Protocols Flow control Number of analog outputs Analog output range D/A resolution Full scale accuracy Span and offset temperatur Performance specifications 32 bit data bus Embedded Linux 32 MB 32 MB 512K (batterybacked) for datalogging and retained variables Datalogging support IIEC programming, ISaGRAF for ladder logic, SFC, flow charting and more (6 languages supported) High Level C programming, Linux open source Ethernet ports 10/100Basex (autodetecting) RJ45 (autocrossover) CP/IP, ARP, UDP, ICNP, DHCP, Modbus/CP, Sixnet, and more Serial ports Screwable (485, 485,, 2wire halfduplex) RJ45 (D, RD, CS, RS, CD, DR, DSR, ) Master and slave, Sixnet & Modbus RU/ASCII; many others available in Linux Hardware, software, RSparty 2 (VIPM2M213D) 0 (VIPM2M113D) 4 ~ 20 ma Analog outputs 16 bit/s (less than 1μA) ± 0,02 % (at 20 C) ± 50 ppm per C typical Max. output settling time max. 5 ms (to 0,5%) Load resistance range (at 24 V) Current 0 ~ 750 Ω Short circuit protection limiting 1

2 Number of analog inputs 8 Analog input range 4 ~ 20 ma A/D resolution 16 Bit (0,003%) Full scale accuracy ± 0,1 % (at 20 C) Span and offset temperatur ± 50 ppm per C Input impedance Current protection DMRR (differential mode rejection) Number of digital inputs 12 Guaranteed ON voltage Maximum voltage Guaranteed OFF voltage & current Input resistance Input current Filtered ON/OFF delay Fast ON/OFF delay 100 Ω Selfresetting fuses 66 db at 50/60 Hz 9 V DC 30 V DC Analog inputs Discrete inputs 5 V DC and 1,5 ma DC 10 kω at 24 V DC 3 ma 25 ms (20 Hz max. counting) 4 ms (100 Hz max. counting) Count rate (channels 1 8) 10 KHz on channel 1 Number of digital outputs 4 Digital output range (4 channels) Maximum output Max. OFF state leakage Minimum load Inrush current ypical ON resistance ypical ON voltage 10 ~ 30 V DC 1 A per channel 4 A per module 0.05 ma 1 ma 5 A (100 ms surge) 0,3 Ω 0,3 V DC at 1 A Operating temperature 40 ~ 70 C Storage temperature Humidity Flammability Vibration Electrical safety EMI emissions EMC immunity 40 ~ 85 C Discrete outputs Environmental 5 to 95% RH (noncondensing) UL 94V0 materials IEC6826 Standards and compliance UL 508, CSA C22.2/14; EN (IEC1010) FCC part 15, ICES003, Class A; EN55022; EN EN (EN ,3,4,6) Hazardous locations Class 1, Div 2, Groups A,B,C,D; UL 1604, CSA C22.2/213, Cenelec EN50021 Zone 2 2

3 Mounting Material Dimensions (HxWxD) rail Flat panel mount Lexan Polykarbonat Housing 9,73 x 12,07 x 10,48 cm Comparison chart VersaRAK IPm2m RU DI AI AO RS232 RS485 Ethernet Memory VIPM2M113D MB Flash & DRAM VIPM2M213D MB Flash & DRAM Accessories EtherRAK 2 Ethernet I/O Modules DI AI AO Description E2 or EBMIX24880D Combination I/O module with 1 isolated input counter E2 or EBMIX24882D Combination I/O module with 2 analog outputs E2 or EB32DI24D inputs (10 ~ 30 V DC) E2 or EB16DI24D individually isolated channels, 10 ~ 30 V DC/V AC with counters E2 or EB16DIACD individually isolated inputs,120 V AC nominal E2 or EB3224D 32 High density discrete outputs E2 or EB1624D 16 Individually isolated 1 Amp outputs with selfresetting fuses E2 or EB32AI20MD 32 High density 16 bit 4 ~ 20mA inputs with selfresetting fuses E2 or EB32AI10VD 32 Voltage inputs E2 or EB16AI20MD channels 4 ~ 20mA inputs with selfresetting fuses E2 or EB8AO20MD 8 4 ~ 20mA analog outputs E2 or EB16AI8AOD ~ 20mA inputs plus 8 4 ~ 20mA outputs E2 or EB16ISOCD 16C Instrumentation thermocouples E2 or EB8ISOCD 8C Instrumentation thermocouples E2 or EB16ISO20MD 16 Isolated 4 ~ 20mA inputs E2 or EB10RDD 10RC RD (100 Ω platinum), 200 ~ 850 C 3

4 Dimensions (cm) VersaRAK IPm2m RU 0.28" (0.71 cm) 4.25" (10.80 cm) 2.95" (7.48 cm) Front View 0.28" Side View 3.23" (8.20 cm) 3.83" (8.20 cm) Ø 0.17" (0.43 cm) (cleaer for #8 screw 4.75" (12.07 cm) 4.47" (11.35 cm) EN " (10.48 cm) 1.80" (4.57 cm) Wiring VersaRAK IPm2m RU RS485 (Port A) Chassis 10 ~ 30 V DC (User Supplied) RS232 RJ45 (Port B) Ethernet RJ45 (10/100) DI Return Jumper: Select DC for sourcing (default) or for sinking DI AI AO RS232 (Port D) for DI Sourcing or DC for DI Sinking (must set jumper in base) Return (DC) (sourcing or sinking DI) DI (Loop powered AI shown) AO AI R S R XD XD 2 G N D RS485 (Port C) 10 ~ 30 V DC RS232 & RS485 Communication Ground 4

5 Connections Equivalent Analog Input Circuit (4 ~ 20 ma) AIN 100 ohms Equivalent Analog Output Circuit (4 ~ 20 ma) Loop Loop Equivalent DC Input Circuit Equivalent DC Output Circuit (nur sourcing) Solid State U Load Jumper 5.1Kohms Sourcing Input Ref Jumper 5.1Kohms Sinking Input Ref Zum Hagenbach 7 D48366 Laer info@welotec.com Fon: 49 (0)2554/ Fax: 49 (0)2554/ CAVersaRAK IPm2m RUV1EN ed. 05/12 Welotec GmbH Welotec is using a ISO 9001:2008 certified quality management system All specifications are subject to change 5