Appendix. Specifications (Ambient temperature 25 C)

Transcription

1 Manual ME-000/00/00/00 Rev..E Appendix A Specifications (Ambient temperature C) PC Interface Standard PCI resp. CompactPCI bus ( bit, MHz, V); PCI Local Bus Specification Version. compliant; CompactPCI Specification PICMG.0 R.0; Resources assigned automatically (Plug&Play) Voltage Outputs (Partly different specifications are valid for the U-Plus channel see separate section) Number of channels, or (depends on model) D/A converter serial converter (00 khz) per channel Resolution bit Output range Output current ±0 V Without external power supply: depends on the number of assembled resp. used channels: Channels I max per channel ma ma 0mA ma Ext. power supply Settling time (DAC) Total accuracy: With electrical isolation With island channels Operation modes Trigger modes External trigger edges With external power supply (±V) only in connection with the options Island channels and High Current : max. ±ma per channel ± V (optional); current per channel: ma + load (max. ±ma) max. µs at full scale (-0V +0V) max. ±0mV max. ±0mV Single, Streaming Software start, ext. digital trigger synchronous start (software/external) rising, falling, any Meilhaus Electronic Page Specifications

2 Rev..E Manual ME-000/00/00/00 Timer controlled output (ME-00/00, channel 0 ) Channels 0 (independent of each another) D/A-FIFOs k values per channel Sample rate max. 00kS/s D/A Timer programmable from µs up to 0s in steps of 0.0ns External Trigger (channel 0 ) Voltage level typ. V Input current I F,mA I F 0mA Reference to ground Ground (GND_x) Delay time max. 0ns Electrical Isolation, Island Channels (optional) Overvoltage protection max. 00V Output Buffer U-Plus (channel number ) Output line Uout_ Voltage range 0 0V Output current max. 0mA Offset error typ. ±mv; max. ±0mV Gain error ±0,% Settling time max. µs at full-scale (0 0V) with 0mA load Digital-I/Os Ports x bit Reference to ground PC ground () Port type bi-directional TTL ports Output level U OL : max. 0.V at ma U OH : min..v at -ma Input level U IL : max. 0.V at Vcc = V U IH : min. V at Vcc = V Input current: ±µa General Information Power consumption at +V ( D/A channels; without ext. load): With electrical isolation max.,a With island channels max.,a Load for max. 00mA Physical size PCI PCI: mm x mm (without mounting bracket and connector) Physical size CompactPCI U CompactPCI board Specifications Page Meilhaus Electronic

3 Manual ME-000/00/00/00 Rev..E Connectors pin D-Sub female connector (ST); 0pin IDC connector (ST) Operating temperature 0 0 C Storage temperature C Relative humidity 0 % (non condensing) CE Certification EMC Directive //EMC Emission EN 0 Noise immunity EN 00- Meilhaus Electronic Page Specifications

4 Rev..E Manual ME-000/00/00/00 B Pinout Legend for pinouts: Attention: With the options High Current and Island Channels the pins -U_x and +U_x are inputs for the external ±V power supply. In all other cases these pins output ±V and it is not permitted to connect them. The hardware will be irreversible damaged! Uout_x +U_x Analog output channels +V power supply; only with the options High Current (HC) and Island Channels. -U_x -V power supply; only with the options High Current (HC) and Island Channels. AO_TRIG_x Digital trigger input for each D/A channels 0 DIO_Ax Digital-I/O port A DIO_Bx Digital-I/O port B GND_x +U_EXT -U_EXT Common ground for all D/A channels. Electrical isolated from PC ground. On models with the option Island Channels additionally the grounds of the single D/A channels are isolated from each another. PC ground for the digital-i/o section V CC output (+V from PC) max. 00mA load ME-00/00 optional: pins for the positive supply for the output buffer of the U-Plus channel (Uout_). ME-00/00 optional: pins for the negative supply for the output buffer of the U-Plus channel (Uout_)). Pin not connected Pinout Page 0 Meilhaus Electronic

5 Manual ME-000/00/00/00 Rev..E B D-Sub Connector (ST) B. ME-000/00 Uout_ Uout_ Uout_ Uout_ Uout_ Uout_0 Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_0 (-U_)* (-U_)* (-U_)* (-U_)* (-U_)* (-U_0)* (-U_)* (-U_)* (-U_)* (-U_)* (-U_)* (-U_)* (-U_)* AO_TRIG_ (-U_)* (-U_)* AO_TRIG_0 (-U_0)* GND_ GND_ GND_ GND_ GND_ GND_0 GND_ GND_ GND_ GND_ GND_ GND_ GND_ AO_TRIG_ GND_ GND_ AO_TRIG_ GND_0 (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_0)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_0)* Diagram : Pinout of the pin D-Sub female connector * Note the warning on page! Meilhaus Electronic Page Pinout

6 Rev..E Manual ME-000/00/00/00 B. ME-00/00 Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_ Uout_0 (+U_EXT)* (+U_EXT)* (-U_)* (-U_)* (-U_)* (-U_)* (-U_)* (-U_)* AO_TRIG_ (-U_)* (-U_)* AO_TRIG_0 (-U_0)* GND_ GND_ GND_ GND_ GND_ GND_ GND_ GND_ AO_TRIG_ GND_ GND_ AO_TRIG_ GND_0 (-U_EXT)* (-U_EXT)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_)* (+U_0)* Abb. : Belegung der poligen Sub-D-Buchse * Note the warning on page! Pinout Page Meilhaus Electronic

7 Manual ME-000/00/00/00 Rev..E B Auxiliary Connector (ST) Adapter cable (ME-AK-DF/S (cpci)) from 0pin IDC connector to mounting bracket with pin D-Sub female connector (comes with the board). DIO_A DIO_A DIO_A DIO_A DIO_B DIO_B DIO_B DIO_B 0 0 DIO_A DIO_A DIO_A DIO_A DIO_A0 DIO_B DIO_A DIO_B DIO_A DIO_B DIO_A DIO_B DIO_B0 DIO_B DIO_B DIO_B CompactPCI 0 0 ST PCI DIO_A0 DIO_A DIO_A DIO_A DIO_B0 DIO_B DIO_B DIO_B ST ME-000 ST Diagram : Auxiliary connector ST for ME-000 series (top view) Attention: When connecting the mounting bracket make sure to plug in pin of the flat ribbon cable (red marked line) as shown above to the IDC connector ST. Meilhaus Electronic Page Pinout