High-Performance Laminates Material Guide
|
|
|
- Bernard Henderson
- 5 years ago
- Views:
Transcription
1 High-Performance Laminates Guide An ISO 9001:2000 Registered Company Petersburgh, NY: Tel: Fax: Europe: Tel: Fax: Asia: Tel: Fax:
2 Taconic High-Performance Properties Part # Composition DF Volume Resistivity Mohm/cm Surface Resistivity Mohm Flexural Strength lbs/in 2 Moisture Absorption % Thermal Conductivity W/m/K Coefficient of Thermal Expansion ppm/ C Peel Strength lbs/in 1 oz Cu UL Rating TLY-5A TLY-5 TLY-3 Lengthwise Crosswise x y z 2.17 (a) (a) >12,000 >10,000 < V (a) (a) >12,000 >10,000 < V (a) (a) >12,000 >10,000 < V0 HT 1.5 Bonding Film TLX-0 TLX-9 TLX-8 TLX-7 TLX-6 TLC-27 TLE-95 TLC-30 TacPreg TPG-30 TLG-30 RF-30 TSM-30 TLC-32 TacPreg TPG-32 TLG-32 TLG-34 TacPreg TPG-35 TLG-35 RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10 (0.0620) 2.45 (a) (a) >23,000 >19,000 < V (a (a >23,000 >19,000 < V (a (a >23,000 >19,000 < V (a (a >23,000 >19,000 < V (a (a >23,000 >19,000 < V (a) (a) >40,000 >35,000 < V (a) (a) >35,000 >30,000 < V (a) (a) >40,000 >35,000 < V0 Prepreg Ceramic BT Ceramic Ceramic x x ,000 22, V (b) (b) 1.26 x x 10 8 >13,000 >9,000 < > V (c) (c) 2.5 x x 10 7 >6,900 >6, V (a) (a) >40,000 >35,000 < V0 Prepreg Ceramic BT Ceramic BT 3.20 (c) (c) 8.2 x x ,000 22, V (c) (c) 8.2 x x ,000 22, V0 Prepreg Ceramic BT Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic 3.50 (c) (c) 8.2 x x ,000 22, V (b) (b) 1.26 x x 10 8 >22,000 >18, > V (b) (b) 1.77 x x 10 7 >7,600 >12, V (b) (b) 5.0 x x 10 7 >28,000 >16, > V (d) (c) 1.40 x x ,700 18,500 < V (d) (c) 6.66 x x ,100 18, V (d) (c) 1.43 x x ,700 19, V (d) (a) 9.0 x x 10 8 >18,300 >14, V (d) (a) 2.1 x x 10 8 >16,500 >15, > V0 All reported values are typical and should not be used for specification purposes. In all instances the user shall determine suitability in any given application. (a) Measured by IPC-TM-650 method (stripline resonator) at 10 GHz (b) Measured by IPC-TM-650 method (modified stripline) at 1.9 GHz (c) Measured by IPC-TM-650 method (modified stripline) at 10 GHz (d) Measured by IPC-TM-650 method (full sheet resonant)
3 Specialty Products HyRelex Prepregs & Laminates Taconicʼs family of low loss, high reliability, flexible laminates and bonding materials. HyRelex Laminates TF TF HyRelex Bond-Ply , , , , , , 0.05, 0.08, , 0.05, 0.09 TPF TPF HyRelex Coverlay TCF , , 0.05 Taclamplus Taclamplus is a cost-effective, laser-ablatable, non-reinforced microwave substrate that can be used to create very low loss structures. Applications include MMIC packaging and mm-wave sensors. Taclamplus 2.20 Increments of Increments of 0.05 & TacPreg Our & TacPreg materials are available in thin-core constructions for high speed digital, RF multilayer and military applications. Laminates TLG Increments of TLG , , TacPreg Prepregs Increments of , 0.20, 0.30 TacPreg TPG , , 0.13 TacPreg TPG , , 0.13 TacPreg TPG
4 Copper Cladding Copper Designation Surface Roughness R MS Treated side Surface Roughness R MS Untreated side Description Thickness Microinches Microns Microinches Microns Mils Micrometers RH Rolled-Annealed 1 / 2 oz R Rolled-Annealed 1 oz CLH CL CVH (CH) CV1 (C1) Reverse treated Electrodeposited 1 / 2 oz Reverse treated Electrodeposited 1 oz Very Low Profile Electrodeposited 1 / 2 oz Very Low Profile Electrodeposited 1 oz C Electrodeposited 2 oz Ohmega Ply and other resistive foils available upon request. Please call for availability of other foils. Heavy Metal Cladding The following heavy metal claddings are available upon request. Heavy Metal Specific Gravity Thermal Conductivity W/m/K Coefficient of Thermal Expansion ppm/ C Machinability Brass Good Copper Fair Aluminum Poor Typical Sizes* Typical Size Long Laminates Cut Sizes 36 x mm x 1220mm *Other sizes available upon request 36 x x x mm x 1524mm 914mm x 1930mm 914mm x 2590mm 12 x x x x x mm x 457mm 406mm x 457mm 457mm x 610mm 406mm x 914mm 610mm x 914mm All reported values are typical and should not be used for specification purposes. In all instances the user shall determine suitability in any given application. Ohmega Ply is a registered trademark of Ohmega Technologies, Inc.
5 Available * Product Available Thickness Thickness Tolerance ( ) (mm) ( ) (mm) Product Available Thickness Thickness Tolerance ( ) (mm) ( ) (mm) TLY-3, 5, 5A (TLY-3,5) / / TacBond HT TLX (TLT)-6, 7, 8, 9, / / / / / / / / / / / / / / / / / / / / / / / / / / TLC / / TLE-95 TacPreg TPG-30, 32 TLG-30, 32, 34, 35 TLC-30, 32 RF / / / / / / / / as agreed upon between customer and supplier / / / / / / / / / / / / TSM-30 TacPreg TPG RF-35 RF-35A RF-35P RF-41 RF-43 RF-45 RF-60A CER-10 *Other thicknesses available upon request / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Revision date: 10/06:100-11
6 Contact Us North & South America Taconic - Headquarters 136 Coonbrook Road Petersburgh, NY Tel: / Fax: Web: addinfo@4taconic.com Synthane Taylor Laminates 1400 Arrow Highway LaVerne, CA Tel: Fax: Web: tonys@4taconic.com Europe Taconic International Ltd. Mullingar Business Park Mullingar, County Westmeath Republic of Ireland Tel: Fax: Web: add@4taconic.com Asia Korea Taconic Company 702 Se-Sung Plaza Yatap-Dong, Bundang-Ku SungNam-Si, KyungKi-Do Republic of Korea Tel: Fax: Web: ktc@4taconic.com
High Performance Laminates Guide
High Performance Laminates Guide North & South America Taconic - Headquarters Petersburgh, NY 12138 Tel: 518-658-3202 / 1-800-833-1805 Email: addinfo@4taconic.com Europe Tel: +353-44-9395600 Email: add@4taconic.com
TFC's substitute high frequency laminate material for Rogers, Arlon, Taconic
TFC's substitute high frequency laminate material for Rogers, Arlon, Taconic Product Composition Dk Df DK Temperature coefficient Tg( ) TD(5%) CTE PIM Thermal Conductivity 10GHz 10GHz PPM/ DSC X Axis Y
LTCC (Low Temperature Co-fired Ceramic)
LTCC (Low Temperature Co-fired Ceramic) Design Guide Line. 381, Wonchun-Dong, Paldal-Ku, Suwon City, Kyung Ki-Do, Republic of Korea Tel : 82-31-217-2500 (Ext. 470) Fax : 82-31-217-7316 Homepage : http://www.pilkorcnd.co.kr
Get PCB Prototypes Sooner with In-House Rapid PCB Prototyping
Get PCB Prototypes Sooner with In-House Rapid PCB Prototyping Save Time with In-House Prototyping In-house circuit board prototyping eliminates waiting for external suppliers. With LPKF systems and solutions,
ULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series
Non-promotional not for new designs FTR-K1 SERIES ULTRA MINIATURE RELAY Flat High Frequency Relay Surface mount, 1 GHz-band, 2 Form C FTR-B3-RF Series FEATURES Excellent high-frequency characteristics
Data Sheet Fujitsu Narrow Pitch Stacking Connector FCN-280 Series
ata Sheet FCN-28 series Not for New esign ata Sheet Fujitsu Narrow Pitch Stacking Connector FCN-28 Series Fujitsu board-to-board narrow pitch stacking connector for use in measurement and factory automation
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW HIGHLIGHTS
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 3 MECHANISM, WITH AVAILABLE CUTTER FTP-631MCL301/302 OVERVIEW This thermal printer (driven by 24 VDC) and cutter provide high speed printing for 3-inch
POWER RELAY. JSL Series. 1 POLE - 8A Polarized Latching Type
POWER RELAY 1 POLE - 8A Polarized Latching Type JSL Series FEATURES Small footprint Width: 10mm Height: 12.5mm High insulation Insulation distance : 8.0 mm (between coil and contacts) Dielectric strength
MP12 SERIES Metallized Polypropylene
Metallized Polypropylene Wrap and Epoxy End Fill MP12 SERIES Metallized Polypropylene Where high insulation resistance, high Q, extreme stability, close tolerance, low dielectric absorption and dissipation
DDR-3 DIMM Vertical Mount Socket
Not for New Designs DDR-3 DIMM Vertical Mount Socket FCN-07 Series FEATURES DDR-3: 240pin DIMM socket connector (press-fit or through hole type) Fujitsu original unique structure for twin contact points
SHUNG CHING ELECTRONIC TECHNOLOGY CO., LIMITED Your MCPCB and PCB supplier
SHUNG CHING ELECTRONIC TECHNOLOGY CO., LIMITED Your MCPCB and PCB supplier Supplier best services for customers Add:Hua Chuangda Nanshan District, Shenzhen City, China. Website: E-mail: Skype: sc.mcpcb
Get PCB Prototypes Sooner with In-House Rapid PCB Prototyping
Get PCB Prototypes Sooner with In-House Rapid PCB Prototyping Save Time with In-House Prototyping In-house circuit board prototyping eliminates waiting for external suppliers. With LPKF systems and solutions,
1 POLE - 5A Change Over Relay
POWER RELAY 1 POLE - 5A Change Over Relay FTR-F3 Series FEATURES High density mounting Height: 15mm Mounting space: 164mm 2 High insulation Insulation distance: 7mm between coil and contacts (conforms
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY For automotive applications POLE - 6A (For 2V Car Battery) FBR59-HW Series FEATURES pole, 6A, form U High temperature grade (-4 C to 25 C) Comparable capability with Power Mini
FTR-K1 HIGH CAPACITY 20A TYPE
FTR-K1 HIGH CAPACITY 20A TYPE 1 POLE - Power Relay FTR-K1 Series FEATURES High capacity 20A (1 form A type) Low profile (height: 15.7mm) High insulation. Insulation distance: min. 10mm between coil and
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY 1 POLE - 30A (For automotive applications) FBR3 Series FEATURES Compact for high density packaging High contact capability (30A continuous) High temperature grade (-40 C to 12
Embedded Power Dies for System-in-Package (SiP)
Embedded Power Dies for System-in-Package (SiP) D. Manessis, L. Boettcher, S. Karaszkiewicz, R.Patzelt, D. Schuetze, A. Podlasky, A. Ostmann Fraunhofer Institute for Reliability and Microintegration (IZM),
FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/10 minutes, 30 A/1 hour)
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY 1 POLE - 40A (For automotive applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface mount compatible
FUJITSU Component Thermal Printer FTP-63HMCL153 series
FUJITSU Component Thermal Printer FTP-63HMCL153 series Fujitsu 3 high speed thermal printer mechanism Overview The compact, low voltage FTP-63HMCL series provides an ultra low profie design and high speed
FUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module
FUJITSU Component Connector FCN-074B / 078B series Card Edge Connector for DDR4 Memory Module Not for New Designs Overview This is a 288-pin DIMM socket that conforms to JEDEC standards. RoHS compliant
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW HIGHLIGHTS
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 2 MECHANISM FTP-621MCL201/202 OVERVIEW This thermal printer (driven by 24 VDC) provides high speed printing for 2-inch wide paper (60 mm). This printer
POWER RELAY. FTR-K4 Series. 120A Latching Relay. Preliminary FTR-K1 SERIES
FTR-K1 SERIES POWER RELAY 10A Latching Relay FTR-K Series FEATURES Switching current : 10 A (1 form A) Contact resistance : Max. 0. mω (Initial) Compact size : 3.0 x 37.0 x.0 mm Plastic materials conform
FUJITSU Component Thermal Printer FTP-64GMCL153 series
FUJITSU Component Thermal Printer FTP-64GMCL153 series Fujitsu 4 high speed (200mm/s)thermal printer mechanism Overview The FTP-64GMCL series thermal printer driven by 24VDC provides high speed printing
PT12 SERIES Polypropylene Capacitor
PT12 SERIES Polypropylene Capacitor Polypropylene Plastic Film Wrap, Epoxy End Fill Type Polypropylene Plastic Film Wrap, Epoxy End Fill Type. Among these is the type PT12 polypropylene precision capacitors,
COMPACT POWER RELAY. FTR-V1 Series. 1 POLE - 210A Battery Latching relay FTR-K1 SERIES FEATURES. Applications PARTNUMBER INFORMATION
FTR-V1 Series FTR-K1 SERIES COMPACT POWER RELAY 1 POLE - 21A Battery Latching relay FEATURES 1 pole 21A 1 form B relay for 12V car battery Low profile Double winding latching relay 21A (at 85 o C) / 12A
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism with cutter option Overview The compact, ultra low profile design FTP-62GMCL series thermal
1 POLE - 16A 80A Inrush type
POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 1.7mm) High insulation Insulation distance (between coil and contacts): 10mm
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER, Easy Loading Method OVERVIEW The 2-inch (58mm), FTP-62DMCL series is an ultra compact, low voltage thermal printer mechanism with a removable
AT&S Company. Presentation. 3D Component Packaging. in Organic Substrate. Embedded Component. Mark Beesley IPC Apex 2012, San Diego.
3D Component Packaging AT&S Company in Organic Substrate Presentation Embedded Component Mark Beesley IPC Apex 2012, San Diego www.ats.net Austria Technologie & Systemtechnik Aktiengesellschaft Fabriksgasse13
For the Electronics Industry
For the Electronics Industry Material of choice... VICTREX PEEK polymer offers a unique combination of properties that can greatly enhance the performance of electronic components. Victrex is an innovative
1 POLE - 5A, TV-3 / TV-5 Type Relay A P. : 1 form A, slim type : 1 form A, flat type
POWER RELAY 1 POLE - 5A, TV-3 / TV-5 Type Relay FTR-F3 Series FEATURES High inrush 51A/78A, TV rating capability Flat and slim power relays Flat type (right angle type): height: 7mm Mounting space: 33mm²
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series
FUJITSU Component Thermal Printer FTP-62GMCL153/453 series Fujitsu 2 high speed (200mm/s)thermal printer mechanism Overview The compact, ultra low profile design FTP-62GMCL series thermal printer (driven
FUJITSU, years of experience Thermal Printers
FUJITSU, years of experience Thermal ers 1 ABOUT FUJITSU COMPONENTS Fujitsu Components Thermal ers Page 02 PRODUCT LINE-UP FTP-602 Page 03 FTP-607 Page 04 FTP-608 Page 05 FTP-609 Page 06 FTP-63A Page 07
FUJITSU Component Thermal Printer FTP-63GMCL153/453 series
FUJITSU Component Thermal Printer FTP-63GMCL153/453 series Fujitsu 3 high speed (up to 200mm/s) thermal printer mechanism with cutter option Overview The FTP-63GMCL series thermal printer driven by 24VDC
POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgCdO contacts) Non Promotional (Not for new designs)
POWER RELAY 1 POLE - 3, A Medium Load Control (AgCdO contacts) JY Series Non Promotional (Not for new designs) FEATURES UL, CSA recognized High sensitivity and low power consumption High insulation Wide
As Dave Dunham from Molex Corp. likes to say, "When designing highspeed serial links beyond 10 GB/s, everything matters".
1 As Dave Dunham from Molex Corp. likes to say, "When designing highspeed serial links beyond 10 GB/s, everything matters". 2 And part of that everything is accurate modeling of transmission line losses.
Comparison of Singulation Techniques
Comparison of Singulation Techniques Electronic Packaging Society, Silicon Valley Chapter Sept. 28, 2017 ANNETTE TENG Sept 28, 2017 1 Definition of Singulation 9/28/2017 Annetteteng@promex-ind.com 2 www.cpmt.org/scv
IPC-D-859. Design Standard for Thick Film Multilayer Hybrid Circuits ANSI/IPC-D-859. The Institute for. Interconnecting
The Institute for Interconnecting and Packaging Electronic Circuits Design Standard for Thick Film Multilayer Hybrid Circuits ANSI/ Original Publication December 1989 A standard developed by the Institute
POWER RELAY. JY Series. 1 POLE - 3, 5A Medium Load Control (AgNi contacts)
POWER RELAY 1 POLE - 3, A Medium Load Control (AgNi contacts) JY Series FEATURES Small and good for high density mounting Mounting space mm, height 1.mm UL, CSA recognized High sensitivity and low power
Passive MMIC 60GHz Equalizer
Page 1 The is a passive MMIC equalizer. It is a positive gain slope equalizer designed to pass DC to 60GHz. Equalization can be applied to reduce low pass filtering effects in both RF/microwave and high
COMPACT POWER RELAY (automotive applications) FTR-P3 Series. Preliminary. 1 POLE - 6A (For 24V car battery) FEATURES. Part Numbers
COMPACT POWER RELAY (automotive applications) 1 POLE - 6A (For 24V car battery) FEATURES Compact for high density packaging. High contact capacity with proven contact material. (100,000 operations, 28V,
W Series. E Series. Designed for customers who are looking for small footprint and lightweight platform Plastic head design with metal fl exible boom
W Series Designed for customers who are looking for small footprint and lightweight platform with waterproofi ng to 1m (based on IP67 rating) Plastic head design with metal fl exible boom Available in
Agenda. Market Overview Product Requirements Mid Loss Product Overview (Theta) Low Loss Product Overview (FX-2) Ultra Low Loss Overview (R&D)
High Speed Digital Agenda Market Overview Product Requirements Mid Loss Product Overview (Theta) Low Loss Product Overview (FX-2) Ultra Low Loss Overview (R&D) MARKET OVERVIEW Macro Trends Video on Demand
AA20B 20 Watts. AA20BSeries
AA20B 20 Watts AA20BSeries Total Power 20 Watts Input Voltages 12V, 24V or 4V # of Outputs Single, Dual SPECIAL FEATURES Six-sided shielding Wide 2:1 / 4:1 input range Telecom models (-04L models) feature
ABRASIVES PRODUCT GUIDE
ABRASIVES PRODUCT GUIDE Table of Contents Innovation in Abrasive Technology Sun Abrasives strives to produce the best quality abrasives to meet the high expectations of our valuable customers. We are constantly
IPC Generic Standard on Printed Board Design ANSI/IPC Supersedes IPC-D-275 September 1991 ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES
ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES Generic Standard on Printed Board Design ANSI/ February 1998 A standard developed by IPC Supersedes IPC-D-275 September 1991 2215 Sanders Road, Northbrook,
Applying the Cannonball Stack Principle to the Huray Roughness Model in Polar Si9000e
Applying the Cannonball Stack Principle to the Huray Roughness Model in Polar Si9000e In addition to the Hammerstad and Groisse models for predicting the additional attenuation due to surface roughness,
PCB Technology Future Trend. Joe Beers (GCE) Dr. Karl Minten(GCE)
PCB Technology Future Trend Joe Beers (GCE) Dr. Karl Minten(GCE) Supporter Pravin Patel (IBM) Scott Kipp(Brocade) Mike Dudek(Qlogic) Barry Barnett(IBM) Mike Li (Altera) Myles Kimmit(Emulex) Mark Bugg(Molex)
JV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)
![JV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)](/thumbs/72/67729739.jpg "JV-KS Series. 1 POLE - 10A High Power Relay POWER RELAY FTR-K1 SERIES FEATURES. PARTNUMBER INFORMATION JV - 12 S - K S [Example] (a) (b) (c) (d) (e)")
FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Power Relay JV-KS Series FEATURES Low profile and space saving - Height: 12.5 mm - Mounting space: 175 mm 2 High insulation - Insulation distance: 8 mm - Dielectric
Industrial Tapes Engineered to Perform Better
Sign and Display Markets Industrial Tapes Engineered to Perform Better ORAFOL s headquarters Located just outside of Berlin in the heart of Europe, the ORAFOL Europe GmbH headquarters is the hub of the
Preliminary POWER RELAY. FTR-F3 Series. 1 POLE - 10A changeover relay FTR-K1 SERIES FEATURES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 10A changeover relay FTR-F3 Series FEATURES Low profile and space saving - Height: 15mm - Mounting space:
HIGH VOLTAGE DC SWITCHING RELAY
HIGH VOLTAGE DC SWITCHING RELAY 1 POLE - 2 / 3A FTR-E1 Series FEATURES 45VDC 2/3A high voltage DC load switching. Non polarized contacts. Switchable for charge/discharge circuit. Low coil power consumption
BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD
BATTERY DRIVE, MICRO LINE THERMAL PRINTER 2 TYPE MECHANISM AND INTERFACE BOARD FTP-624MCL001/002/FTP-624DCL/DSL OVERVIEW FTP-624MCL/FTP-624DCL Series is a high speed line thermal printer driven by battery,
(LRC) Metal Strip Chip Current Sense Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web:
Version: January 12, 2017 (LRC) Metal Strip Chip Current Sense Resistor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
SD Series Cord and Light Reels
SD Series Cord and Light Reels Engineered Solutions to Help you Work Smarter and Faster PROVEN QUALITY. LEADING TECHNOLOGY. A perfect complement to Graco s line Hose Reels Graco fits your business Built
DISCONTINUED FTP-632UCL531 / USL530 DESIGNATION
24V driven receipt printer unit 3 printer unit FTP-632UCL531 / USL530 Overview The FTP-632 UCL/USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed
Digital Coating Thickness Gauge Model No. PTG-4500 Revised 10/15/2010
Digital Coating Thickness Gauge Model No. PTG-4500 Revised 10/15/2010 www.phase2plus.com Features: 283 Veterans Boulevard Carlstadt NJ 07072 * Automatic substrate recognition (Fe, NFe) * The PTG-4500 is
2 POLES-2A High insulation/wide gap
FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric
2008 Printed Circuits, Inc.
Why Flex? Innovation Flexible circuits give you a unique tool to bring your innovative packaging ideas to market, and to separate your products from the crowd. Flex gives you the ability to create circuitry
Preliminary FBR-59-HW. 1 POLE - Small high power 60A relay POWER RELAY FTR-K1 SERIES
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - Small high power 60A relay FBR-59-HW FEATURES 1 pole, 60A, 1 form U High temperature grade (-40 C to
24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER
24V DRIVE, HIGH SPEED LINE THERMAL PRINTER 4 MECHANISM, WITH OR WITHOUT CUTTER FTP-642MCL001/002 FTP-642MCL301/302 OVERVIEW FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal printer driven
FTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES
POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation
Global Optical Coatings Market
Market Report Global Optical Coatings Market Published: April, 2014 Publisher: Acmite Market Intelligence Language: English Pages: 520 Price: from 1,490 Euro Abstract As an enabling technology, thin film
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
1 POLE - 8A Medium Load Control. [Example] JS - 12 M F - K T - V3* - RW (a) (b) (c) (d) (e) (f) (g) (h)
![1 POLE - 8A Medium Load Control. [Example] JS - 12 M F - K T - V3* - RW (a) (b) (c) (d) (e) (f) (g) (h)](/thumbs/74/70223713.jpg "1 POLE - 8A Medium Load Control. [Example] JS - 12 M F - K T - V3* - RW (a) (b) (c) (d) (e) (f) (g) (h)")
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving Height: 12. mm - Mounting
COMPACT POWER RELAY. FTR-G1 Series. 1 POLE - 25A (For Automotive Applications) FTR-K1 SERIES FEATURES APPLICATIONS PARTNUMBER INFORMATION
FTR-K SERIES COMPACT POWER RELAY POLE - A (For Automotive Applications) FTR-G Series FEATURES Compact for high density packaging High contact capacity with proven contact material (min., operations, V,
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) FTP-629MCL103/383
24V DRIVE, FTP-609 SERIES ULTRA HIGH SPEED (200mm/s) 2 TYPE MECHANISM (Cutter option) VERVIEW The FTP-609MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing (200mm/s) for 2-inch
FTR-P3 Series (Reflowable)
COMPACT POWER RELAY For automotive applications 1 POLE-25A (for 12V car battery) FTR-P3 Series (Reflowable) FEATURES Compact for high density packaging 1 pole 25A, 1 form A / 1 form C Coil power savings
FBR51 Latching Series
FTR-K1 SERIES COMPACT POWER RELAY 2 POLE - 30A (For Automotive Applications) FBR51 Latching Series FEATURES Magnetically latched PCB relay Increased ambient temperature range up to 125C Two coils with
SWITCH PRODUCTS. The Global Leader in User Interface
SWITCH PRODUCTS The Global Leader in User Interface PRODUCTS Membrane Switches (Tactile and Non-tactile) Our custom keypad solutions, designed and supported throughout both North America and Asia, include
Commercial/Industrial Circular Connectors
Commercial/Industrial Circular Connectors Commercial/Industrial Circular Connectors Spectrum Control has been a leader in providing application-specific EMI filtered connector solutions since its founding
FTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 105 C FTR-K1 Series FEATURES Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge
1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz ON Switching Time CTRL to 0.1 db final value, 2 GHz 200 ns
Product Description The PE4245 RF Switch is designed to cover a broad range of applications from near DC to 4 MHz. This switch integrates on-board CMOS control logic with a low voltage CMOS compatible
Materials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
POWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-086 /087 SERIES OVERVIEW Fujitsu s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed
ECP Embedded Component Packaging Technology
ECP Embedded Component Packaging Technology A.Kriechbaum, H.Stahr, M.Biribauer, N.Haslebner, M.Morianz, M.Beesley AT&S Austria Technologie und Systemtechnik AG Abstract The packaging market has undergone
ZXCT1084EV1 USER GUIDE
USER GUIDE Performance Current Monitor with wide supply range: 2.7V to 60V Independent chip supply and supply-tobe-monitored Low quiescent current (25µA typ) Fixed gain of 25 Accuracy 2% Ambient temperature
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
OBSOLETE
Product Description The PE4237 RF Switch is designed to cover a broad range of applications from near DC to 4 MHz. This reflective switch integrates on-board CMOS control logic driven by a single-pin,
GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode
GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113
1 POLE - 5A Medium Load Control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Medium Load Control VE Series FEATURES UL, CSA, VDE, CQC recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in
FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/2 minutes, 30 A/1 hour) Suitable
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed
POWER RELAY. VF Series. 1 POLE - 20/25/30A - Heavy power control FTR-K1 SERIES. To be discontinued FEATURES
To be discontinued FTR-K1 SERIES POWER RELAY 1 POLE - 20/25/30A - Heavy power control VF Series FEATURES UL, CSA, VDE recognized TV-15 rated 1 form A contact (SPST-NO) Heavy duty 20 to 30A small power
Innovative 3D Structures Utilizing Wafer Level Fan-Out Technology
Innovative 3D Structures Utilizing Wafer Level Fan-Out Technology JinYoung Khim #, Curtis Zwenger *, YoonJoo Khim #, SeWoong Cha #, SeungJae Lee #, JinHan Kim # # Amkor Technology Korea 280-8, 2-ga, Sungsu-dong,
DATA SHEET DVI - HDCP Extension Cable
M1-1P0x (Ver. 1.1) DATA SHEET DVI - HDCP Extension Cable M1-1P0x Contents Description Features Absolute Maximum Ratings Recommended Operating Conditions Electrical Power Supply Characteristics Receiver
POWER RELAY. FTR-C1 Series. 2 POLES-2A High insulation/wide gap FTR-K1 SERIES FEATURES
FEATURES 2 Poles, 2 form C Contact gap: more than 0.6mm High surge voltage: 2,500V between open contacts 5,000V between coil & contact Complies with Telcordia (former Bellcore) 2nd level surge Dielectric
DISCONTINUED (1999) UR1 SERIES MINIATURE RELAY FEATURES ORDERING INFORMATION
MINIATURE RELAY 2 POLES ( SIGNAL HIGH FREQUENCY ) SWITCHING UR1 SERIES FEATURES Subminiature polarized relay Excellent high frequency characteristics Isolation : minimum 60 db } at 900 MHz Insertion loss:
Digital Coating Thickness Gauge Model No
250 Gibbs Road Islandia NY 11749 Digital Coating Thickness Gauge Model No. 15964 www.phase2plus.com Unique Products - Innovative Solutions Features: 250 Gibbs Road Islandia NY 11749 * The 15964 is capable
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
Rigid/Bus Bars. Standard Copper Rigid / Bus. PC Board Stiffeners and Current Carrying Busses. Table of Contents. Benefits
Rigid/Bus Bars Circuit Components Inc. PC Board Stiffeners and Current Carrying Busses Table of Contents Standard Copper Rigid Bus Benefits...1 Part Specifications..2 Part Drawings.3 Snap-In Board Stiffener
U7100 Pressure Transducer
Performance standard for on and off highway engine & vehicle OEMs Rugged for heavy equipment and outdoor use such as HVAC refrigeration systems Designed specifically for high volume applications Stainless
Generic Standard on Printed Board Design
IPC-2221B Generic Standard on Printed Board Design Developed by the IPC-2221 Task Group (D-31b) of the Rigid Printed Board Committee (D-30) of IPC Supersedes: IPC-2221A - May 2003 IPC-2221 - February 1998
ED-22 Analog Output Series Magnetic Encoder
SPECIFICATIONS Analog voltage output Low profile Standard industry package size Sleeve bearing The ED-22 series magnetic encoder can be used to replace a conventional potentiometer. This product offers
POWER RELAY. FTR-F4G Series. 2 POLE - 5A - 1.5mm contact gap FTR-K1 SERIES FEATURES
POWER RELAY 2 POLE - 5A - 1.5mm contact gap FTR-F4G Series FTR-K1 SERIES FEATURES 2 Pole, 5A 2 Form A Contact gap 1.5mm Sealed type available High insulation in small package (between coil and contact)
POWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal
DATA SHEET DVI - HDCP Extension Cable
M1-1P0E (Ver. 1.3) DATA SHEET DVI - HDCP Extension Cable M1-1P0E Contents Description Features Absolute Maximum Ratings Recommended Operating Conditions Electrical Power Supply Characteristics Transmitter
FTP-628MCL401#01/451#01
BATTERY DRIVEN, FTP-608 Series 2 HIGH SPEED THERMAL PRINTER FTP-628MCL401#01/451#01 OVERVIEW The FTP-628 MCL Series are battery driven high-speed printers with a 2-inch paper width equivalent. The FTP-628