Flexible Top Light 270. Features and Benefits.

Transcription

1 Flexible Top Light 270 Features and Benefits Seamless Dot-free Illumination Domed profile allows for a 270 beam Angle Your choice of Epistar or Nichia LEDs Quick Lead Times Fabricated with Eco-friendly, UV-resistant PVC materials Rated for Wet Environments Durable and Impact Resistant Contains No Lead, Mercury or Glass Interfaces With All Automation & Control Systems 5 year Life Span Flexible Top Light, or FTL, the most reliable dot-free linear light on the market, offers seamless fittings built to preserve light uniformity. Engineered for on-site configuration and assem-bly makes the FTL the definite solution for architectural accents and signage. FTL flexibility is just one of the many outstanding features which allow designers to explore organic shapes and advanced patterns, previously not possible. For more information please contact our agent NRG Management

2 Technical Specifications Dimensions 11.5 x 29mm /.45 x 1.14in Output Red/Amber/Orange White/Green/Blue LED Light Running Length SMD LED Chip Single feed: 10 meters / feet Double feed: 20 meters / feet Light Surface Rounded profile 270 Lumen Maintenance 70,000 Hours 25 C : 90, ,000 Hours 50 : 70,000 Hours 50 C Chromaticity Ordinates x: y: u: v: Color Bin Tolerances +/- 3 % Efficacy (lm/w) CRI 88 Electrical Input Voltage 24V DC Power Consumption 8 watts per meter / 12 watts per meter / 2.44 watts per foot 3.66 watts per foot Power Factor 1 LED Count Dimming Physical Materials LED Spacing 60 per meter / 18 per foot v 0-10v & Magnetic Low Voltage Polyvinyl Chloride (PVC) 16.7 millimeter /.66 inch Cutting Length 125 millimeter / 4.92 inch 83.3 millimeter / 3.28 inch (9 LEDs ) (6 LEDs ) Package Size: millimeters / inches Weight/Meter: Thermal Management Fixture Connections Bend Tolerances Maximum Diameter (lateral bending only) Temperature Ranges Installation Operating Humidity Dependability Warranty Safety Certification IP Rated 490 Grams / 1.08 Pounds Cool to the Touch, Free Air Convection Front & End Leader Cables 120 millimeters / 4.72 inches 0 to 45 Celsius / 32 to 113 Fahrenheit -20 to 45 Celsius / -4 to 113 Fahrenheit 0-95% Non Condensing 3 years Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 Factory Order/ IP68 with Accessories *Warm Colors: Red, Yellow, Amber and Orange. Cool Colors: Whites, Green, Blue and Hot Pink. **Photometric Data available upon request or at Colors Available Color Red Pink Orange Amber Yellow Green Blue Warm White White Cool White Daylight White Lumen Count Profile 29 mm 1.14 inch 11.5 mm.45 inch Mounting CCT Wave Length Nanometer Nanometer Nanometer Nanometer Nanometer Nanometer Nanometer 2700K 3000K 3500K 4000K 4500K 5000K 5700K Color Per Meter Per Foot Power Red >110lm >33.53lm 8W/m 2.44W/ft Pink >150lm >45.72lm /m 3.66W/ft Orange >90lm >27.43lm 8W/m 2.44W/ft Amber >110lm >33.53lm 8W/m 2.44W/ft Yellow >260lm >79.24lm /m 3.66W/ft Green >220lm >67.06lm /m 3.66W/ft Blue >35lm >10.67lm /m 3.66W/ft 2700K >280lm >85.34lm /m 3.66W/ft 3000K >280lm >85.34lm /m 3.66W/ft 3500K >320lm >97.54lm /m 3.66W/ft 4000K >320lm >97.54lm /m 3.66W/ft 4500K >320lm >97.54lm /m 3.66W/ft 5000K >320lm >97.54lm /m 3.66W/ft 5700K >320lm >97.54lm /m 3.66W/ft Tolerance of the light is ±0.3mm.

3 Year 270 D:120mm 3 Year Specifications Minimum Bend Diameter Horizontal Bending Only Bend light perpendicular to the direction of the circuit board. 120 mm 4.72 inch Photometric Data LED Type Epistar SMD Beam angle 270 Color Wavelength Lumen/m Power/m Color CCT Lumen/m Power/m Red nm >120lm 7.2W 2100K 2100±125K > 340lm Green nm >280lm 2400K 2400±125K >340lm Blue nm >40lm 2700K 2725±145K Amber nm >120lm 7.2W 3000K 3045±175K Orange nm >90lm 7.2W 3500K 3465±245K 4000K 3985±275K 4500K 4503±243K 5000K 5028±283K 5700K 5660±355K 6500K 6530±510K Caution Before making any cuts, installation, maintenance or connection, be sure the fixture is disconnected! Note: all connector joints must be connected correctly to achieve IP68 rating. Only operate this flex light according to the instructions, the working voltage must match product requirements. Be sure to confirm the polarity of the connector before inserting the front connection cable. Be sure to connect and cut this product correctly. Incorrect cutting and connecting will damage this product. Use correct DC power supply. Do not power the light for over 30 minutes in coil packaging. Do not bend past the minimum diameter or twist this fixture. Doing so will result in damaging the internal circuit board. Do not put undue stress or pull excessively on the cables or injection connectors. This can cause the connectors to detach or fail. Do not mix the four colors (R, G, B, W) in full load simultaneously. To extend the life of your fixtures, do not operate lights in daylight temperatures exceeding 113 F (45 C). Doing so will decrease the lifespan of the product. To extend the life of your fixtures, it is recommended to turn off your lights for a short time after 8 continuous hours of operation. Doing so helps the heat dissipate.

4 Types of Connector Injection-moulded End Fittings Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Bottom Exit Cable Connects light to power supply with pre-installed bottom cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 OLED-FTL-IP68-FA-PFB-1m OLED-FTL-IP68-FA-PFB-3m 16.5mm 30.8mm 11.5mm 41.8mm 1.8mm 18mm Side Exit Cable Connects light to power supply with pre-installed side cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 OLED-FTL-IP68-FA-PFS-1m OLED-FTL-IP68-FA-PFS-3m 29mm 16.5mm 11.5mm 22.5mm Φ12mm 1.8mm 18mm End Exit Cable Connects light to power supply with pre-installed end cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length Φ12mm 30.8mm Φ12mm 1m / 3.2 3m / 9.8 OLED-FTL-IP68-FA-PFE-1m OLED-FTL-IP68-FA-PFE-3m 11.5mm 18mm 29mm End Cap 16.5m m 1.8mm Pre-installed termination protection of the light, IP mm 30.8mm OLED-FTL-FA-EC 11.5m m 15mm

5 End Fittings Stocked accessories. Standard on non-factory orders. Bottom Power Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 OLED-FTL-IP68-1M-RB OLED-FTL-IP68-3M-RB Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate *1 33mm 20.5mm 43mm Snap Fittings Stocked accessories. Standard on non-factory orders. Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 OLED-FTL-IP68-SC-1M OLED-FTL-IP68-SC-3M Feed connector * 1 (PC Cover), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1 End Cap Termination protection of the light. IP68. OLED-FTL-IP68-SC-END Tail plug * 1 Silicone gasket *1 PC Cover * 1 Crimp Plate * 1 Optional Accessory Male and Female Connectors - OLED-FTL-FA-ISC Cutter Please Note: Factory order only. *Installation guide available upon request

6 Mounting Channel Aluminum Mounting Channel 50 mm / 1.97 inch 25 mm /.98 inch / 1000 mm / inch 100 mm / 3.94 inch 200 mm / 7.87 inch.94 inch.87 inch.54 inch /.14 inch OLED-FTL-AL-CLIP 3 Basic, 160 & 270 Models OLED-FTL-AL-1M-CHAN 5 Basic, 160 & 270 Models Plastic Mounting Channel.55 inch Please Note: Production Order Only. 21 Day Lead Time. /.14 inch 300 mm / inch OLED-FTL-PL-CLIP 50 mm / 1.97 inch 200 mm / 7.87 inch 3 Basic, 160 & 270 Models 1000 mm / inch OLED-FTL-PL-1M-CHAN 100 mm / 3.94 inch 200 mm / 7.87 inch 5 Basic, 160 & 270 Models

7 Self-locking Aluminum Mounting Channel Uses: Ceilings and Vertical Installations mm / 1.97 inch OLED-FTL-CLIP-SL 25 mm /.98 inch / 25 mm /.98 inch / 1000 mm / inch OLED-FTL-AL-1M-CHAN-SL 100 mm / 3.94 inch 200 mm / 7.87 inch 150 mm / 5.91 inch 350 mm / inch Self-locking Clip Naming Convention Standard Length 50mm / 1.96 inch OLED-FTL-AL-CLIP-(SL) OLED-FTL V-XXXX-LEN LEN - Length XXXX - LED Color 24V - Voltage Beam Angle FTL - Type

8 Charts

9 Charts (X,Y) Chromaticity Diagram Wavelength of Color Light

10 Power Supply Configuration Table The maximum length of light for different power supply ratings. Rated Power /mtr Power Supply 35w 60w 75w 80w 100w 120w 150w 185w 240w 320w 6.5w / 7.2w / 8w 3m 6m 7.5m 8m 10m 12m 15m 18m 24m 30m 10.6w / 11w / 12w 2m 3.5m 4.5m 5m 6m 7m 10m 12m 14m 20m Feed Setup Single Feed Double Feed Example: It is recommended to use one 80W power supply when loading maximum 8m light (7.2w/m) or maximum 5m light (12w/m) when powering the light at one end. Correlated Color Temperature ANSI STANDARD Nominal CCT Categories Remark Nominal CCT 2700K 3000K 3500K 4000K 4500K Target CCT and tolerance(k) 2725 ± ± ± ± ± 243 Target CCT and tolerance(k) ± ± ± ± ± Six of the nominal CCTs correspond to those in the fluorescent lamp specification [2]:2700K,3000K(Warm White),3500K(White),4100K(Cool White),5000K and 6500K(Daylight),respectively. T is chosen to be at 100K steps (2800,2900,,6400K), excluding, hose eight nominal CCTs listed in Table K 5700K 6500K Flexible CCT ( K) 5028 ± ± ± 510 T 2 +ΔT ± ± ± D UV T 2 ± ΔT is given by ΔT = T T Duv is given by Duv=57700 (1/T) (1/T)