MasterINTERFACE 39 Series - Relay interface modules

Transcription

1 MasterINTERFACE 39 Series - Relay interface modules 39 SERIES Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross) terminals and s versions 35 mm rail mounting (EN 60715) MasterASIC For general use in any type of system EMR: 6 to 24 and 125 AC/DC, 230 AC supply SSR: 6 to 24 DC, 125 AC/DC, 230 AC supply and EMR Electromechanical Relays 1 CO 6 A 250 AC High switching capability SSR Solid State Relays 1 solid state output (options 0.1 A 48 DC, 2 A 24 DC, 2 A 240 AC) Silent, high speed switching, long electrical life 39.11/ /39.00 MasterPLUS Accepts the output fuse module, for the easy and space efficient protection of output circuits EMR: 6 to 125 AC/DC, 125 and 220 DC, 230 AC supply SSR: AC/DC, 6 to 220 DC and 230 AC supply Special 125 AC/DC and 230 AC leakage current suppression types ( , EMR and , SSR) and MasterINPUT Jumper link option for the quick and easy distribution of supply voltage to proximity switches and similar input devices Page 4 Page / / Page 6 Page / /39.70 EMR: 6 to 24 and 125 AC/DC, 230 AC supply SSR: 6-24 DC, AC/DC, 230 AC supply and MasterOUTPUT Jumper link option for the quick and easy distribution of supply voltage to output side and its connection to electromagnetic valves and similar output devices EMR: 6 to 24 and 125 AC/DC, 230 AC supply SSR: 6 to 24 DC, 125 AC/DC, 230 AC supply and MasterTIMER Timer adjustment via top mounted rotary knob accessible after assembly Control signal terminal DIP-switch for selection of 4 time scales and 8 functions Output with fuse module option EMR and SSR: 12 to 24 AC/DC supply and Page 8 Page / /39.50 Page 10 Page / /39.90 Page 12 Page 13

2 39 SERIE S MasterASIC For general interface use in any type of system and application. Can be used for input interface applications between auxiliary contacts, sensors etc. and controllers, PLCs or motors. Or for output interface between PLC s controllers and relays, solenoids etc. Typical Applications MasterPLUS This special version provides extra protection for the output circuit thanks to the replaceable fuse module. For general interface use in any type of system and application. Can be used for input interface applications between auxiliary contacts, sensors etc. and controllers, PLCs or motors. Or for output interface between PLC s controllers and relays, solenoids etc. Output devices Output devices Fuse module PLC - Output PLC - Output PLC - Input PLC - Input Fuse module Input devices Input devices

3 MasterINPUT These models allow the full termination of input device to the interface without the need for additional terminals - saving component cost, time and panel space. Quick and easy distribution of supply voltage through the jumper link on the us-ar () connection. Ideal for interface applications between the auxiliary contacts, sensors, limit switches and Controllers or PLC s. Typical Applications MasterOUTPUT These models allow the full termination of output device to the interface without the need for additional terminals - saving component cost, time and panel space. Quick and easy distribution of supply voltage through the jumper link on the us-ar () connection. Ideal for interface applications between the PLC s or Controllers and output devices such as electomagnetic valves or motors etc.. MasterTIMER Slim and Multifunction Timed Interface modules. 39 SERIES Output devices Output devices Fuse module PLC - Output PLC - Output PLC - Input PLC - Input Input devices Input devices 3

4 39 SERIE S 39 Series - Relay interface modules A MasterASIC - EMR Features 39.11/ Pole interface module, 6.2 mm wide, ideal for PLC and electronic systems Common connection possible with optional jumper links (terminals A1, A2 and 11) UL Listing (certain relay/socket combinations) 6 A electromechanical relay 6 to 24 and 125 AC/DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting For outline drawing see page 20, 21 Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage AC Rated load AC1 A Rated load AC15 (230 AC) A Single phase motor rating (230 AC) kw reaking capacity DC1: 30/110/220 A Minimum switching load mw (/ma) Standard contact material Supply specification Nominal voltage (U N ) AC/DC AC (50/60 Hz) Rated power A (50 Hz)/W Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) k Dielectric strength between open contacts AC Ambient temperature range C Protection category Approvals relay (according to type) 4 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi See page 16 ( )U N 0.6 U N 0.1 U N ( )U N /6 6 (8 mm) 1, IP 20

5 39 Series - Relay interface modules A 39 SERIES MasterASIC - SSR Features 39.10/ Pole interface module, 6.2 mm wide, ideal for PLC and electronic systems Common connection possible with optional jumper links (terminals A1, A2 and 13+) UL Listing (certain relay/socket combinations) 0.1 or 2 A solid state relay 6 to 24 DC, 125 AC/DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting For outline drawing see page 20, 21 Output specification (SSR) Contact configuration Rated current/maximum peak current (10 ms) A Rated voltage/maximum blocking voltage Switching voltage range Repetitive peak off-state voltage pk Minimum switching current ma Max. OFF-state leakage current ma Max. ON-state voltage drop Supply specification Nominal voltage (U N ) AC/DC AC (50/60 Hz) DC Rated power A (50 Hz)/W Must drop-out voltage Technical data Operate/release time ms Dielectric strength between input/output AC Ambient temperature range C Protection category Approvals relay (according to type) 39.x0.x.xxx x0.x.xxx x0.x.xxx NO (SPST-NO) 2/20 DC 0.1/0.5 DC 2/40 AC 24/33 DC 48/60 DC 240/ AC (1.5 24) DC (1.5 48) DC (12 275) AC See page 17 ( ) U N 0.1 U N 0.2/ / /12 2, IP20 5

6 39 SERIE S 39 Series - Relay interface modules A MasterPLUS - EMR Features 39.31/ / Pole interface modules, 6.2 mm wide, ideal for PLC and electronic systems Accepts output fuse module (for 5 x 20 mm fuses) for quick and easy load protection, see page 24 Common connection possible with optional jumper links (terminals A1, A2 and 11) UL Listing (certain relay/socket combinations) 6 A electromechanical relay 6 to 125 AC/DC, 125 and 220 DC, 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting 6 A electromechanical relay Leakage current suppression version, 125 AC/DC and 230 AC supply and push-in terminal / / Fuse module For outline drawing see page 20, 21 Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage AC Rated load AC1 A Rated load AC15 (230 AC) A Single phase motor rating (230 AC) kw reaking capacity DC1: 30/110/220 A Minimum switching load mw (/ma) Standard contact material Supply specification Nominal voltage (U N ) AC/DC AC (50/60 Hz) DC Rated power A (50 Hz)/W Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) k Dielectric strength between open contacts AC Ambient temperature range C Protection category Approvals relay (according to type) 6 1 CO (SPDT) 1 CO (SPDT) 6/10 6/10 250/ /400 1,500 1, /0.2/0.12 6/0.2/ (12/10) 500 (12/10) AgNi AgNi See page 16 See page 16 ( ) U N ( ) U N 0.6 U N 0.6 U N 0.1 U N 0.3 U N /6 5/6 6 (8 mm) 6 (8 mm) 1,000 1, (+55 for 220 DC) IP20 IP20

7 39 Series - Relay interface modules A 39 SERIES MasterPLUS - SSR Features 39.30/ / Pole interface modules, 6.2 mm wide, ideal for PLC and electronic systems Accepts output fuse module (for 5 x 20 mm fuses) for quick and easy load protection, see page 24 Common connection possible with optional jumper links (terminals A1, A2 and 13+) UL Listing (certain relay/socket combinations) 0.1 or 2 A solid state relay AC/DC, 6 to 220 DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting 0.1 or 2 A solid state relay Leakage current suppression version, 125 AC/DC and 230 AC supply and push-in terminal / / Fuse module For outline drawing see page 20, 21 Output specification (SSR) Contact configuration Rated current/maximum peak current (10 ms) Rated voltage/maximum blocking voltage Switching voltage range Repetitive peak off-state voltage Minimum switching current Max. OFF-state leakage current Max. ON-state voltage drop Supply specification Nominal voltage (U N ) Rated power Must drop-out voltage Technical data Operate/release time Dielectric strength between input/output Ambient temperature range Protection category Approvals relay (according to type) A pk ma ma AC/DC AC (50/60 Hz) DC A (50 Hz)/W ms AC C 39.x0.x.xxx x0.x.xxx x0.x.xxx x0.3.xxx x0.3.xxx x0.3.xxx NO (SPST-NO) 1 NO (SPST-NO) 2/20 DC 0.1/0.5 DC 2/40 AC 2/20 DC 0.1/0.5 DC 2/40 AC 24/33 DC 48/60 DC 240/ AC 24/33 DC 48/60 DC 240/ AC (1.5 24) DC (1.5 48)DC (12 275) AC (1.5 24) DC (1.5 48)DC (12 275) AC See page 17 See page 17 ( ) U N ( ) U N 0.1 U N 0.3 U N 0.2/ / /12 0.2/ / /12 2,500 2, IP20 IP20 7

8 39 SERIE S 39 Series - Relay interface modules A MasterINPUT - EMR Features 1 Pole interface module, 6.2 mm wide, ideal for PLC and electronic systems Jumper link option for the quick and easy distribution of supply voltage to proximity switches and similar input devices (us-bar connection ) Gold plated output contact as standard, for better compatibility with low energy PLC inputs UL Listing (certain relay/socket combinations) 39.41/ A electromechanical relay AC/DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting For outline drawing see page 20, 21 Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage AC Rated load AC1 A Rated load AC15 (230 AC) A Single phase motor rating (230 AC) kw reaking capacity DC1: 30/110/220 A Minimum switching load mw (/ma) Standard contact material Supply specification Nominal voltage (U N ) AC/DC AC (50/60 Hz) Rated power A (50 Hz)/W Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) k Dielectric strength between open contacts AC Ambient temperature range C Protection category Approvals relay (according to type) CO (SPDT) 6/10 250/400 1, /0.2/ (5/2) AgNi + Au See page 16 ( ) U N 0.6 U N 0.1 U N /6 6 (8 mm) 1, IP20

9 39 Series - Relay interface modules A 39 SERIES MasterINPUT - SSR Features 39.40/ Pole interface modules, 6.2 mm wide, ideal for PLC and electronic systems Jumper link option for the quick and easy distribution of supply voltage to proximity switches and similar input devices (us-bar connection ) UL Listing (certain relay/socket combinations) 0.1 or 2 A solid state relay DC, AC/DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting For outline drawing see page 20, 21 Output specification (SSR) Contact configuration Rated current/maximum peak current (10 ms) Rated voltage/maximum blocking voltage Switching voltage range Repetitive peak off-state voltage Minimum switching current Max. OFF-state leakage current Max. ON-state voltage drop Supply specification A pk ma ma 39.x0.x.xxx x0.x.xxx x0.x.xxx NO (SPST-NO) 2/20 DC 0.1/0.5 DC 2/40 AC 24/33 DC 48/60 DC 240/ AC (1.5 24) DC (1.5 48) DC (12 275) AC Nominal voltage (U N ) Rated power AC/DC AC (50/60 Hz) DC A (50 Hz)/W See page 17 ( ) U N Must drop-out voltage 0.1 U N Technical data Operate/release time Dielectric strength between input/output Ambient temperature range Protection category Approvals relay (according to type) ms AC C 0.2/ / /12 2, IP20 9

10 39 SERIE S 39 Series - Relay interface modules A MasterOUTPUT - EMR Features 39.21/ Pole interface modules, 6.2 mm wide, ideal for PLC and electronic systems Jumper link option for the quick and easy distribution of supply voltage to output side (us-bar connection ) and its connection to electromagnetic valves and similar output devices UL Listing (certain relay/socket combinations) 6 A electromechanical relay AC/DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting For outline drawing see page 20, 21 Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage AC Rated load AC1 A Rated load AC15 (230 AC) A Single phase motor rating (230 AC) kw reaking capacity DC1: 30/110/220 A Minimum switching load mw (/ma) Standard contact material Supply specification Nominal voltage (U N ) AC/DC AC (50/60 Hz) Rated power A (50 Hz)/W Holding voltage Must drop-out voltage Technical data Mechanical life AC/DC cycles Electrical life at rated load AC1 cycles Operate/release time ms Insulation between coil and contacts (1.2/50 μs) k Dielectric strength between open contacts AC Ambient temperature range C Protection category Approvals relay (according to type) NO (SPST-NO) 6/10 250/400 1, /0.2/ (12/10) AgNi See page 16 ( ) U N 0.6 U N 0.1 U N /6 6 (8 mm) 1, IP20

11 39 Series - Relay interface modules A 39 SERIES MasterOUTPUT - SSR 39.20/39.50 Features 1 Pole interface modules, 6.2 mm wide, ideal for PLC and electronic systems Jumper link option for the quick and easy distribution of supply voltage to output side (us-bar connection ) and its connection to electromagnetic valves and similar output devices UL Listing (certain relay/socket combinations) 0.1 or 2 A solid state relay 6 to 24 DC, 125 AC/DC and 230 AC supply and push-in terminal 35 mm rail (EN 60715) mounting For outline drawing see page 20, 21 Output specification (SSR) Contact configuration Rated current/maximum peak current (10 ms) Rated voltage/maximum blocking voltage Switching voltage range Repetitive peak off-state voltage Minimum switching current Max. OFF-state leakage current Max. ON-state voltage drop Supply specification A pk ma ma 39.x0.x.xxx x0.x.xxx x0.x.xxx NO (SPST-NO) 2/20 DC 0.1/0.5 DC 2/40 AC 24/33 DC 48/60 DC 240/ AC (1.5 24) DC (1.5 48) DC (12 275) AC Nominal voltage (U N ) Rated power Must drop-out voltage Technical data AC/DC AC (50/60 Hz) DC A (50 Hz)/W See page 17 ( ) U N 0.1 U N Operate/release time Dielectric strength between input/output Ambient temperature range Protection category Approvals relay (according to type) ms AC C 0.2/ / /12 2, IP20 11

12 39 SERIE S 39 Series - Relay interface modules A MasterTIMER - EMR Features 39.81/39.91 Slim timed interface module, 6.2 mm wide, ideal for space-saving timing solutions in panels Timer adjustment via top mounted rotary knob, accessible after assembly Control signal terminal DIP-switch for selection of 4 time scales and 8 functions Accepts output fuse module (for 5 x 20 mm fuses) for quick and easy load protection, see page 24 Common connection possible with optional jumper links (terminals A1, A2 and 15) UL Listing (certain relay/socket combinations) A electromechanical relay AC/DC supply and push-in terminal 35 mm rail (EN 60715) mounting Fuse module AI: On-delay DI: Interval GI: Pulse (0.5 s) delayed SW: Symmetrical flasher (starting pulse on) E: Off-delay with control signal CE: On- and off-delay with control signal DE: Interval with control signal on EE: Interval with control signal off For outline drawing see page 20, 21 Contact specification Contact configuration Rated current/maximum peak current A Rated voltage/maximum switching voltage AC Rated load AC1 A Rated load AC15 (230 AC) A Single phase motor rating (230 AC) kw reaking capacity DC1: 30/110/220 A Minimum switching load mw (/ma) Standard contact material Supply specification Nominal voltage (U N ) AC/DC Rated power AC/DC A (50 Hz)/W Holding voltage Must drop-out voltage Technical data Specified time range Repeatability % Recovery time ms Minimum control impulse ms Setting accuracy full range % Electrical life at rated load AC1 cycles Ambient temperature range C Protection category Approvals relay (according to type) 12 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi See page 16 ( ) U N 0.6 U N 0.1 U N ( )s, (3...60)s, (1...20)min, ( )h ± IP20

13 39 Series - Relay interface modules A 39 SERIES MasterTIMER - SSR Features 39.80/39.90 Slim timed interface module, 6.2 mm wide, ideal for space-saving timing solutions in panels Timer adjustment via top mounted rotary knob; accessible after assembly Start terminal DIP-switch for selection of 4 time scales and 8 functions Accepts output fuse module (for 5 x 20 mm fuses) for quick and easy load protection, see page 24 Common connection possible with optional jumper links (terminals A1, A2 and 15+) UL Listing (certain relay/socket combinations) or 2 A solid state relay AC/DC supply and push-in terminal 35 mm rail (EN 60715) mounting Fuse module AI: On-delay DI: Interval GI: Pulse (0.5 s) delayed SW: Symmetrical flasher (starting pulse on) E: Off-delay with control signal CE: On- and off-delay with control signal DE: Interval with control signal on EE: Interval with control signal off For outline drawing see page 20, 21 Output specification (SSR) 39.x0.x.xxx x0.x.xxx x0.x.xxx.8240 Contact configuration 1 NO (SPST-NO) Rated current/maximum peak current (10 ms) A 2/20 DC 0.1/0.5 DC 2/40 AC Rated voltage/maximum blocking voltage 24/33 DC 48/60 DC 240/ AC Switching voltage range (1.5 24) DC (1.5 48) DC (12 275) AC Repetitive peak off-state voltage pk 600 Minimum switching current ma Max. OFF-state leakage current ma Max. ON-state voltage drop Supply specification Nominal voltage (U N ) AC/DC Rated power A (50 Hz)/W See page 17 ( ) U N Holding voltage 0.6 U N Must drop-out voltage 0.1 U N Technical data Specified time range ( )s, (3...60)s, (1...20)min, ( )h Repeatability % ± 1 Recovery time ms 50 Minimum control impulse ms 50 Setting accuracy full range % 5 Ambient temperature range Protection category Approvals relay (according to type) C IP20 13

14 39 SERIE S 39 Series - Relay interface modules - Ordering information Ordering information Example: MasterPLUS 39 series screw terminal interface module, electromechanical relay output, 1 CO (SPDT), 24 AC/DC coil. A C D Series Type 1 = MasterASIC, screw terminal 0 = MasterASIC, push-in terminal 3 = MasterPLUS, screw terminal, fuse-protectable output 6 = MasterPLUS, push-in terminal, fuse-protectable output 4 = MasterINPUT, screw terminal 7 = MasterINPUT, push-in terminal 2 = MasterOUTPUT, screw terminal 5 = MasterOUTPUT, push-in terminal 8 = MasterTIMER multifunction, screw terminal, fuse-protectable output 9 = MasterTIMER multifunction, push-in terminal, fuse-protectable output No. of poles 1 = 1 CO (only EMR, except 39.21/51, 1 NO) 0 = 1 NO (only SSR) Coil version, EMR / Input version, SSR 0 = AC (50/60 Hz)/DC 3 = Leakage current suppression AC (50/60 Hz) 7 = DC sensitive 8 = AC (50/60 Hz) Coil voltage, EMR / Input voltage, SSR See page 16 D: Special ersion, EMR 0 = Standard C: Options, EMR 6 = Standard : Contact circuit, EMR 0 = CO (except 39.21/51, 1 NO) A: Contact material, EMR 0 = AgNi Standard 4 = AgSnO 2 5 = AgNi + Au ACD: Output version, SSR 7048 = 0.1 A - 48 DC 8240 = 2 A AC 9024 = 2 A - 24 DC EMR - Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Type Coil version A C D 39.11/ / / / / SSR - Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold. Type Input version Output version, ACD / / / / /

15 Technical data Insulation according to EN Nominal voltage of supply system AC 230/400 Rated insulation voltage AC Pollution degree 3 2 Insulation between coil and contact set Type of Insulation Overvoltage category Rated impulse voltage k (1.2/50) μs 6 Reinforced Dielectric strength AC 4,000 Insulation between open contacts (EMR) Type of disconnection III Micro-disconnection Dielectric strength AC/k (1.2/50) μs 1,000/1.5 Conducted disturbance immunity U N 60 U N = 125 U N = 230 Fast transients (burst 5/50 ns, 5 khz) according to EN at supply terminals k oltage pulses (surge 1.2/50 μs) according to EN at supply terminals (differential mode) k Other data ounce time (EMR) : NO/NC ms 1/6 ibration resistance (EMR, Hz): NO/NC g 10/15 Power lost to the environment without contact current W 0.2 (24 ) 0.4 (230 ) with rated current W 0.6 (24 ) 0.9 (230 ) Terminals 39 Series - Relay interface modules - Technical data Wire strip length mm 10 8 Screw torque Nm 0.5 Solid and stranded cable Max. wire size mm 2 1 x 2.5/2 x x 2.5 AWG 1 x 14/2 x 16 1 x 14 Min. wire size mm 2 1 x x 0.2 AWG 1 x 24 1 x 24 Solid and stranded cable 39 SERIES Contact specification (EMR) F 39 - Electrical life (AC) v contact current H 39 - Maximum DC1 breaking capacity Cycles Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 DC breaking current (A) DC voltage () When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of can be expected. In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. 15

16 39 SERIE S 39 Series - Relay interface modules - Technical data Coil specifications - Electromechnical Relay Coil data DC, type 39.31/61 Nominal oltage Coil code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma W 125 ( ) Coil data AC/DC, type 39.11/21/31/41/01/51/61/71 Nominal oltage Coil code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma A/W / / / (1) /0.35 (1) 60 AC/DC for type 39.31/61 only 125 ( ) /0.7 Coil data AC, type 39.11/21/31/41/01/51/61/71 Nominal oltage Coil code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma A/W 230 ( ) /0.4 Coil data leakage current suppression versions, type /61.3 Nominal oltage Coil code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma A/W 125 ( ) /1 The 39 Series interface modules (supply version 3) have builtin leakage current suppression to address industry concerns of the contacts not dropping-out when there is residual current in the circuit; at ( ) AC/DC and ( ) AC. This problem can occur, for example, when connecting the interface modules to PLC s with triac outputs or when connecting via relatively long cables. 230 ( ) /0.5 Coil data AC/DC timer, type 39.81/91 Nominal oltage Coil code (AC/DC) Must drop-out voltage Rated input current at U N Rated power at U N U N U min U max U r DC AC DC AC ma ma W A/W / /0.3 16

17 39 Series - Relay interface modules - Technical data 39 SERIES Input specifications - Solid State Relay Input data DC, type 39.10/20/30/40/00/50/60/70 Nominal oltage Input code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma W (1) (1) 60 DC, 125 DC and 220 DC for type 39.30/60 only 125 (1) ( ) (1) Input data AC/DC, type 39.10/20/30/40/00/50/60/70 Nominal oltage Input code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma A/W 24 (2) / ( ) /0.7 (2) 24 AC/DC for type 39.30/40/60/70 only Input data AC, type 39.10/20/30/40/00/50/60/70 Nominal oltage Input code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma A/W 230 ( ) /0.4 Input data leakage current suppression versions, type /60.3 Nominal oltage Input code Must drop-out voltage Rated input current at U N Rated power U N U min U max U r I N at U N ma A/W 125 ( ) /1 The 39 Series interface modules (supply version 3) have builtin leakage current suppression to address industry concerns of the contacts not dropping-out when there is residual current in the circuit; at ( ) AC/DC and ( ) AC. This problem can occur, for example, when connecting the interface modules to PLC s with triac outputs or when - connecting via relatively long cables. 230 ( ) /0.5 Input data AC/DC timer, type 39.80/90 Nominal oltage Input code (AC/DC) Must drop-out voltage Rated input current at U N Rated power at U N U N U min U max U r DC AC DC AC ma ma W A/W / /0.3 17

18 39 SERIE S 39 Series - Timed interface modules Timer specifications EMC specifications Type of test Reference standard Electrostatic discharge contact discharge EN k air discharge EN k Radio-frequency electromagnetic field (80 1,000 MHz) EN /m (1,400 2,700 MHz) EN /m Fast transients (burst) (5-50 ns, 5 and 100 khz) on Supply terminals EN k on control signal terminals EN k Surges (1.2/50 μs) on supply and control common mode EN k signal terminals differential mode EN k Radio-frequency common mode on Supply terminals EN ( MHz) on control signal terminals EN Radiated and conducted emission EN class Other data ounce time (EMR) : NO/NC ms 1/6 ibration resistance (EMR, Hz): NO/NC g 10/15 Power lost to the environment without contact current W 0.3 with rated current W 0.8 Terminals Wire strip length mm 10 8 Screw torque Nm 0.5 Solid and stranded cable Max. wire size mm 2 1 x 2.5/2 x x 2.5 AWG 1 x 14/2 x 16 1 x 14 Min. wire size mm 2 1 x x 0.2 AWG 1 x 24 1 x 24 Solid and stranded cable Times scales ( )s (3...60)s (1...20)min ( )h Functions LED Supply voltage NO contact/output OFF Open ON Open ON Open (timing to close in progress) ON Closed 18

19 39 Series - Timed interface modules 39 SERIES Wiring diagram U = Supply voltage S = Signal switch = Output contact Without control signal (AI) On-delay Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs when power is removed (DI) Interval Apply power to timer. Output contacts transfer immediately. After the preset time has elapsed, contacts reset (GI) Pulse (0.5s) delayed Apply power to timer. Output contacts transfer after preset time has elapsed. Reset occurs after a fixed time of 0.5s (SW) Symmetrical flasher (starting pulse on) Apply power to timer. Output contacts transfer immediately and cycle between ON and OFF for as long as power is applied. The ratio is 1:1 (time on = time off). With control signal (E) Off-delay with control signal Power is permenently applied to the timer. The output contacts transfer immediately on closure of the Signal Switch (S). Opening the Signal Switch initiates the preset delay, after which time the output contacts reset. * *With DC supply, positive polarity has to be conneted to 1, terminal (according to EN ) (CE) On- and off-delay with control signal Power is permenently applied to the timer. Closing the Signal Switch (S) initiates the preset delay, after which time the output contacts transfer. Opening the Signal switch initiates the same preset delay, after which time the output contacts reset. (DE) Interval with control signal on Power is permenently applied to the timer. On momentary or maintained closure of Signal Switch (S), the output contacts transfer, and remain so for the duration of the preset delay, after which they reset (EE) Interval with control signal off Power is permenently applied to the timer. On opening of the Signal Switch (S) the output contacts transfer, and remain so for the duration of the preset delay, after which they reset. Possible to control an external load, such as another relay coil or timer, connected to the control signal terminal 1. ** A voltage other than the supply voltage can be applied to the command Start (1), example: A1 - A2 = 24 AC 1 - A2 = 12 DC 19

20 39 SERIE S 39 Series - Relay interface modules A Outline drawings - sockets / / / /

21 39 Series - Relay interface modules A 39 SERIES Outline drawings - sockets / / / / Main features s The push-in terminals permit the quick connection of solid wires or ferrules by their simple insertion into the terminal (A). It is possible to open the terminal to extract the wire by first pushing down on the push-button using a screwdriver (C). For stranded cable it is necessary first to open the terminal using the push button, both for the extraction (C) and insertion (). It is possible at any time to check the connection via the test aperture, using a 2mm diameter test probe (D). A C D 21

22 39 SERIE S Example:.xxxx Series - Relay interface modules A Electromechanical Relay (1 Pole 6 A) & Screw Socket Combinations Interface Module Code Coil voltage Relay Socket MasterASIC AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC MasterPLUS AC/DC AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC ( ) DC DC ( ) AC/DC ( ) AC MasterINPUT AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC MasterOUTPUT 1 NO, 6 A only AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC MasterTIMER AC/DC AC/DC Solid State Relay (1 Pole 0.1 or 2 A) & Screw Socket Combinations Interface Module Code Input voltage Relay Socket MasterASIC xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterPLUS xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx 60 DC xxxx xxxx ( ) DC xxxx xxxx 220 DC xxxx xxxx 24 AC/DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterINPUT xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx 24 AC/DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterOUTPUT xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterTIMER xxxx 12 AC/DC xxxx xxxx 24 AC/DC xxxx

23 39 Series - Relay interface modules A 39 SERIES Electromechanical Relay (1 Pole 6 A) & Push-in Socket Combinations Interface Module Code Coil voltage Relay Socket MasterASIC AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC MasterPLUS AC/DC AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC ( ) DC DC ( ) AC/DC ( ) AC MasterINPUT AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC MasterOUTPUT 1 NO, 6 A only AC/DC AC/DC AC/DC ( ) AC/DC ( ) AC MasterTIMER AC/DC AC/DC Solid State Relay (1 Pole 0.1 or 2 A) & Push-in Socket Combinations Example:.xxxx Interface Module Code Input voltage Relay Socket MasterASIC xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterPLUS xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx 60 DC xxxx xxxx ( ) DC xxxx xxxx 220 DC xxxx xxxx 24 AC/DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterINPUT xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx 24 AC/DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterOUTPUT xxxx 6 DC xxxx xxxx 12 DC xxxx xxxx 24 DC xxxx xxxx ( ) AC/DC xxxx xxxx ( ) AC xxxx MasterTIMER xxxx 12 AC/DC xxxx xxxx 24 AC/DC xxxx

24 39 SERIE S 39 Series - Relay interface modules A Accessories Output fuse module for 39.31/30/81/80/61/60/91/90 types For 5 x 20 mm fuses up to 6 A, Easy visibility of the fuse condition through the window - Quick connection to socket Approvals (according to type): Notes Safety: ecause the output circuit can be reinstated (point 3 below), even with the fuse removed, it is important not to consider the removal of the fuse as a safety disconnect. Always isolate elsewhere before working on the circuit. UL: According to UL508A, the fuse module cannot be installed in power circuits (in which it is mandatory that a fuse certified according to UL category JDDZ be fitted). However, where the MasterInterface is connected as an output interface to a PLC no such restrictions apply, and the fuse module can be usefully employed. Multi-state fuse module 0. As delivered, the socket comes without a fuse module. However, the absent fuse is internally replaced with an electrical link - which allows the interface relay to be used without a fuse module. In this state, the peg/indicator is visually hidden and the connection is protected by a special cap. 1. With fuse module inserted after removing the cap, the fuse is positioned electrically in series with the common output terminal of the interface module (11 for EMR versions, 13+ for SSR versions, 15 for EMR timer, 15+ for SSR timer). This state is indicated by the peg/indicator. 2. If the fuse module is extracted (for example; because the fuse element has blown) the output circuit will be locked open, as this will generally be the safe option. This state is indicated by the peg/indicator. 3. In order to reinstate the output circuit it is necessary to either re-insert the fuse module (complete with functional fuse), or alternatively, return the peg/indicator to position 0 by gently applying pressure in the direction of the arrow. 24

25 39 Series - Relay interface modules A 39 SERIES Accessories way jumper link (blue) (black) (red) Rated values 36 A Possibility of multiple connection, side by side Approvals (according to type): Dual-purpose plastic separator (1.8 mm or 6.2 mm separation) y breaking off the protruding ribs (by hand), the separator becomes only 1.8 mm thick; useful for the visual separation of different groups of interfaces, or necessary for the protective separation of different voltages of neighbouring interfaces, or for the protection of cut ends of jumper links Leaving the ribs in place provides 6.2mm separation. Simply cutting (with scissors) the relevant segment(s) permits the interconnection across the separator of 2 different groups of interface relays, using the standard jumper link. Sheet of marker tags, plastic, 72 tags, 6x12 mm

26 39 SERIE S 39 Series - Relay interface modules A Accessories Approvals (according to type): Connected MasterADAPTER MasterADAPTER The MasterADAPTER permits the easy connection of A1/A2 terminals of up to MasterINTERFACE modules to PLC outputs via a 14-Pole ribbon cable, plus simple 2-wire power supply connection. Technical data Rated current (per signal path) A 1 Minimum required supply power W 3 Nominal voltage (U N ) DC 24 ( ) U N Control logic Positive switching (to A1) Power supply status indication Green LED Ambient temperature range C Terminals for 24 control logic Type of connector 14 pole, according to IEC Terminals for 24 power supply Wire strip length mm 9.5 Screw torque Nm 0.5 Max. wire size solid wire mm 2 1 x 4/2 x 1.5 AWG 1 x 12/2 x 16 stranded wire mm 2 1 x 2.5/2 x 1.5 AWG 1 x 14/2 x 16 Wiring diagram 26