JUMO di 308. Brief description. Key features. Block structure. Approvals/marks of conformity (see Technical data) Data Sheet
|
|
- Aleesha Norman
- 5 years ago
- Views:
Transcription
1 JUMO GmbH & Co. KG Delivery address:mackenrodtstraße, 0 Fulda, Germany ostal address: 0 Fulda, Germany hone: 000 Fax: mail@jumo.net Internet: JUMO Instrument Co. Ltd. JUMO House Temple Bank, Riverway Harlow, Essex CM0 DY, UK hone: Fax: sales@jumo.co.uk Internet: JUMO rocess Control, Inc. Techlogy Boulevard Canastota, NY 0, UA hone: JUMO 00JUMO Fax: info@jumo.us Internet: Data heet 0.0 age / JUMO di 0 Digital Indicator, microprocessorcontrolled, with max. inputs, wide range of expansion options, panelmounting DIN housing, bezel mm x mm Brief description The JUMO di 0 indicator shows temperatures in C or F, and standard signals in plain text. Even the basic instrument is provided with one analog input, two binary inputs, two relay outputs, two logic outputs, and a supply voltage for a wire transmitter. Three expansion slots can be filled with additional inputs, outputs and interfaces. The highcontrast, multicolor LCD for showing measurements and for operator prompting consists of a digit segment display (for the measurement or for setting parameters), an character segment display with color changeover (for the value, parameter name, channel name, process/alarm text as a running text of max. characters, or a pseudo bar graph), and switch status indicators for the binary outputs. Four keys are provided on the instrument for operation and configuration, and a setup program for C use is available as an option (e.g. for configuring the math and logic functions, and the input of display texts). Linearizations for the usual transducers are stored, a customerspecific linearization table can be programmed through 0 interpolation points or by entering the coefficients of the polymial. An R/ or a ROFIBUD interface can be used to integrate the instrument into a data network. The electrical connection is made at the back, via screw terminals. The possible input and output configurations are shown in the following block diagram. Block structure Analog input relays, changeover (DT) Key features JUMO di 0 Type 00/... k Configurable process display text (max. character running text) binary inputs Option Option Option logic outputs upply for wire transmitter etup interface k Alarm signal text with color changeover greenred (also as running text) k Up to two configurable analog inputs k Three option slots k Math and logic module (option) k limit comparators k Fast and convenient configuration through setup program Option boards: Analog input binary inputs relay 0V/A, changeover (DT) relays 0V/A, make (TNO), with common pole solidstate relay Analog output (voltage/current) R/ interface ROFIBUD interface k R/ interface (option) k ROFIBUD interface (option) Approvals/marks of conformity (see Technical data)
2 age / Technical data Thermocouple input Designation Measuring range Meas. accuracy FeCon L FeCon J CuCon U CuCon T NiCrNi K NiCrCon E NiCriNii N t0rht trht R t0rhtrh B WReWRe C WReWRe D WReWRe Chromelcopel Cold junction RTD input Input for standard signals Binary inputs GOT.00 Measuring circuit monitoring 00 to 00 C 00 to 00 C 00 to 00 C 00 to 00 C 00 to C 00 to 000 C 00 to 00 C 0 to C 0 to C 0 to 0 C 0 to 0 C 0 to C 0 to 00 C 00 to 00 C (incl. cold junction) (from 00 C) t00, internal The accuracy refers to the max. measurement range span. The linearization accuracy is reduced with short spans. Ambient temperature error Designation Connection circuit Measuring range Meas. accuracy Ambient /wire wire temperature error t00 EN 0 wire / wire / wire 00 to 0 C 0.0% 0.% 0ppm/ C t00 EN 0 wire / wire / wire 00 to 0 C 0.% 0.% t000 EN 0 wire / wire / wire 00 to 0 C 0.% 0.% 0ppm/ C t0 GOT wire / wire / wire 00 to 0 C 0.% 0.% 0ppm/ C t00 GOT wire / wire / wire 00 to 0 C 0.0% 0.% 0ppm/ C Cu0 GOT wire / wire / wire 0 to 00 C 0.%.% 0ppm/ C Cu00 GOT wire / wire / wire 0 to 00 C 0.% 0.% 0ppm/ C KTY wire 0 to 0 C.0% 0ppm/ C ensor lead resistance 0Ω max. per lead for wire/wire circuit Measuring current approx. 0µA Lead compensation Not required for wire or wire circuit. With a wire circuit, the lead resistance can be compensated in software by a correction of the process value. Designation Measuring range Meas. accuracy Ambient temperature error Voltage 0() 0V 0 V Input resistance R IN > 00kΩ 0.0% 0.0% Current 0() 0mA, voltage drop.v 0.0% Resistance transmitter min. 00Ω, max. kω ±Ω Floating contacts Transducer Detection of overrange/underrange open = t active; shortcircuit to GND = active Detection of probe/lead shortcircuit Detection of probe/lead break Thermocouple RTD Voltage 0V 0 0V 0 V Current 0mA 0 0mA Resistance transmitter In the event of a fault, the outputs move to a defined (configurable) status.
3 age / Outputs Relay, changeover (DT) contact life Logic outputs upply voltage for wire transmitter Relay, changeover (DT), option contact life Relay, make (TNO), option contact life olidstate relay (option) protection circuitry Voltage (option) output signals load resistance accuracy Current (option) output signals load resistance accuracy A/D converter Resolution ampling cycle time Display Type Display Function of display Display Function of display Display A at 0V AC resistive load operations at rated load / operations at A 0/V / ma max. (sum of all output currents 0mA max.) electrically isolated, t stabilized..v / 0 0mA A at 0VAC resistive load operations at rated load / operations at A A at 0VAC resistive load operations at rated load / operations at A A at 0V varistor 0 0V / 0V R load 00Ω 0.% 0 0mA / 0mA R load 00Ω 0.% dynamic up to Bit 0ms, 0ms, 0ms, 0ms (configurable) LCD with background lighting segment display, mm high, digits, color: red measurement display and parameter setting segment display, mm high, digits, color: red/green (switchable) character running text display (alarms), display of measurements or parameter names switching status indicators (K to K), mm high Electrical data upply voltage (switchmode U) 0 0V AC /0%, Hz or 0 0V AC/DC, Hz Electrical safety to EN 00, art overvoltage category III, pollution degree ower consumption VA max. Data backup EEROM Electrical connection Electromagnetic compatibility (EMC) interference emission interference immunity at the back, via screw terminals, conductor crosssection up to.mm (see table on page ) EN Class B to industrial requirements Housing Housing type plastic housing for panel mounting to IEC Depth behind panel Ambient/storage temperature range 0 mm 0 to C / 0 to 0 C Climatic conditions rel. humidity 0% annual mean, condensation Operating position Enclosure protection Weight (fully fitted) horizontal to EN 0, front I / back I0 approx. 0g
4 age / Interface Modbus Interface type R/R rotocol Modbus, Modbus Integer Baud rate 00, 00, 00 Device address 0 Max. number of des ROFIBUD Device address 0 Approvals/approval marks Approval mark Testing agency Certificate/ certification number Test basis c UL us Underwriters Laboratories E 0 UL 00 CAN/CAC. No. 00 valid for JUMO di 0 Type 00/...
5 age / Customized linearization In addition to the linearizations for the usual transducers, a customerspecific linearization can be created. The programming is carried out in the setup program, in the form of a table of values (0 value pairs) or a formula (coefficient entry of polymial). User data arameters which frequently have to be changed by the user can be combined at the user level, under User data (only through the setup program). Math and logic module (extra code) The math module makes it possible to integrate measurements from the analog inputs into a mathematical formula, so that the calculated process variable is displayed. The logic module can be used, for instance, to make a logical combination of binary inputs and limit comparator states. Up to two math or logic formulae can be entered through the setup program, and the results of the calculations can be presented at the outputs or via the display. Binary functions key/level inhibit display off text display color changeover resetting MIN/MAX values hold function ackwledge limit comparators taring function resetting the taring function jump to next scroll parameter The logic functions can be combined with one ather (only through the setup program). Interfaces etup interface The setup interface is integrated as standard in the indicator. It can be used to configure the instrument, in conjunction with the setup program (accessory) and setup interface (accessory). R/R interface The serial interface serves for communication with supervisory systems, using the Modbus protocol. ROFIBUD The indicator can be integrated into a field bus system according to the ROFIBUD standard via the ROFIBUD interface. This ROFIBU version is especially designed for communication between automation systems and decentralized peripheral devices at the field level, and optimized for speed. Data transmission is made serially, using the R standard. GD generator, the projectplanning tool that is supplied with the package (GD = Dimensions Gerätestammdaten, i.e. device data), is used to make a selection of device characteristics for the indicator, to create a standardized GD file that is used to integrate the indicator into the field bus system. Displays and controls () () () segment display (measurement display) digit, red; configurable decimal place (automatic adjustment on display overflow) () segment display (character running text, parameter name, level symbols) character, green or red; configurable decimal place () Indication yellow; for four switching states of max. four outputs (indicator lit up = on) () Keys 0 () () Functions of the outputs.. analog input variables math limit comparators binary inputs logic formula etup program for C (accessory). C interface adapter anel cutout 0. The C setup program for configuring the instrument is available in English, French, German and other languages. It can be used to create and edit data sets, transfer them to the instrument or read them out from it. The data can be saved and printed. The program includes a startup function for recording and visualizing measurement data. idebyside mounting 0. Minimum spacing of panel cutouts horizontal vertical without setup plug: 0mm mm with setup plug (see arrow): mm mm
6 0 0 L(L) N(L) Option Option Option age / Connection diagram Option Option Option Terminal strip Terminal strip (option slots) Terminal strip Terminal strip Conductor crosssections and coreend ferrules for installation Coreend ferrule Conductor crosssection Min. length of coreend ferrule or stripped min. max. without ferrule 0.mm.mm 0mm (stripped) without lip 0.mm.mm 0mm with lip up to.mm² 0.mm.mm 0mm with lip from.mm².mm.mm mm twin, with lip 0.mm.mm mm upply U= L L N L L N L 0 0V AC L 0 0V AC/DC U..V / = 0 0mA upply voltage for wire transmitter (offload voltage: approx. V) Relays 0V/A Binary output 0V/A Binary output Terminal strip Terminal strip Input RTD RTD RTD Resistance transmitter E A Thermocouple Current I x / I x ~ Voltage 0() 0V U x Voltage 0 V U x Terminal assignment of strip for analog input 0 Binary 0 Binary input GND Binary output (logic V) () () GND () Terminal strip Option Analog input Analog input, connection as for analog input binary inputs Analog output Relay, changeover (DT) relays, make (TNO) olidstate relay GND U x / I x Binary input Analog output Binary output Binary output Binary output ROFIBU V ( V) RxD/TxD (B) RxD/TxDN (A) DGND R RxD RxD TxD TxD R RxD/TxD RxD/TxD Option Analog input, connection as for analog input U x / I x GND Binary input Analog output Binary output Binary output Binary output V ( V) RxD/TxD (B) RxD/TxDN (A) DGND RxD RxD TxD TxD RxD/TxD RxD/TxD Option 0 Analog input, connection as for analog input U x / I x GND 0 Binary input Analog output Binary output Binary output 0 Binary output V ( V) RxD/TxD (B) RxD/TxDN (A) DGND RxD RxD TxD TxD RxD/TxD RxD/TxD
7 age / Order details Basic type 00 JUMO di 0 including analog input, binary inputs, relay outputs, logic outputs, mm x mm bezel Basic type extensions Basic type Version standard, with factory settings programming to customer specification logic outputs ( are available) 0/V Option slots... Option slot Max. number t used analog input (universal) relay output, changeover (DT) relay output, make (TNO) analog output binary inputs solidstate relay A R/ interface ROFIBUD interface Caution: Any assignment of the options to the slots (slots, or ) is possible. Their max. number, however, must t be exceeded. upply voltage 0 0V AC, Hz 0 0V AC/DC, Hz Extra codes 000 ne math and logic module / / Order code 00 / 0 0 / 000 Order example tandard accessories indicator seal mounting brackets Operating Instructions B0.0.0 in DIN A format Accessories C setup program ales No. 0/00 C interface with TTL/R converter and adapter ales No. 0/0000 C interface with UB/TTL converter, adapter (socket) and adapter (plug) ales No. 0/00 Further accessories A CD with the demo setup program and DF documents (operating instructions and further documentation) can be ordered separately. View of the three option slots
Process Indicator PA308
GmbH ostal address:: House address Fon () 0 00 ostfach Löhestr. Fax () 0 00 http: // www.tematec.de Hennef Hennef email: team@ tematec.de Data heet A0 age / rocess Indicator A0 Digital Indicator, microprocessorcontrolled,
More informationJUMO ctron 04/08/16 Compact controller with timer and ramp function
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 3603 Fulda, Germany Phone: 49 661 60030 Fax: 49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net JUMO
More informationJ itron DR 100 Microprocessor Controller
JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60030 Fax: +49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net
More informationHeinz Konsolke Ingenieurbüro. Schalten. Steuern. Regeln
Heinz Konsolke Ingenieurbüro. chalten. teuern. Regeln Meß, Regel und Registriertechnik für Temperatur, Druck, Feuchte, Füllstand, chaltgeräte, räzisionsendschalter, Zeitrelais Zinnaer traße. D Felgentreu.
More informationProcess controllers for the meat processing industry
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationController module. Brief description. Features. Block structure. Page 1/7. Data Sheet
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJUMO Quantum PID100/PID200/PID300
Data sheet 702020 Page 1/12 JUMO Quantum PID100/PID200/PID300 Universal PID Controller Series Brief description The Quantum series is available in the three DIN formats 48 mm x 48 mm, 48 mm x 96 mm, and
More informationJUMO itron 04/08/16/32 Compact microprocessor controllers
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationJIMAGO 500 Multi-channel process and program controller
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60030 Fax: +49 661 6003607 Email: mail@jumo.net Internet: www.jumo.net
More informationJUMO DICON 400/500 Universal process controllers
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: 49 661 6003-0 Fax: 49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJIMAGO 500 Multi-channel Process and Program Controller
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60030 Fax: +49 661 6003607 email: mail@jumo.net Internet: www.jumo.net
More informationJUMO safetym TB/TW 08 Temperature limiter, monitor as per DIN EN
JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJIMAGO 500 Multi-channel Process and Program Controller
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60030 Fax: +49 661 6003607 email: mail@jumo.net Internet: www.jumo.net
More informationJDICON 400/500 Universal process controllers
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60 03-0 Fax: +49 661 60 03-6 07 E-mail: mail@jumo.net Internet: www.jumo.de
More informationJUMO DICON 401/501 Universal profile controllers/generators
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJUMO DICON 400/500 Universal process controllers
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: 49 661 6003-0 Fax: 49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJUMO diraview 104/108/116/132
Page 1/19 JUMO diraview 104/108/116/132 Digital indicator Brief description The digital indicator series comprises five freely configurable, universally usable devices in various DIN formats to display
More informationEntry-level Paperless Recorder with CompactFlash card and life-cycle data management
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationPaperless Recorder for secure acquisition of FDA-compliant measurement data. B Installation Instructions 11.07/
es Paperless Recorder for secure acquisition of FDA-compliant measurement data B 70.6560.4 Installation Instructions 11.07/00415650 Menu structure of the paperless recorder Contents 1 Introduction 5 1.1
More informationJ LOGOSCREEN nt Paperless Recorder with TFT display and CompactFlash card. B Installation Instructions 08.06/
J LOGOSCREEN nt Paperless Recorder with TFT display and CompactFlash card B 70.6580.4 Installation Instructions 08.06/00453822 Contents 1 Introduction 5 1.1 Preface... 5 1.2 Arrangement of the documentation...
More informationJUMO mtron T Measuring, Control, and Automation System
sales@jumo.co.uk info.us@jumo.net Data Sheet 705040 Page 1/8 JUMO mtron T Measuring, Control, and Automation System Router module Brief description The router module is used to achieve decentralization
More informationJDICON 1001 Universal profile controller
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 60 03-0 Fax: +49 661 60 03-6 07 E-mail: mail@jumo.net Internet: www.jumo.de
More informationController module. Brief description. Features. Block structure. Data Sheet Page 1/7
M. K. Juchheim GmbH & Co UK USA Jumo Instrument Co. Ltd. Jumo Process Control Inc. 36035 Fulda, Germany Temple Bank, Riverway 735 Fox Chase Phone (0661) 6003-0 Harlow, Essex CM20 2TT Coatesville, PA 19320
More informationPrinting recorder with text printing and 24-character LED dot-matrix display. Brief description. Overview of functions. Features
JUMO GmbH & Co. KG Delivery address: Mackenrodtstraße 14 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationPaperless recorder for capturing, visualizing, storing and evaluating measurement data
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationPaperless Recorder with CompactFlash card as storage medium
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationPRELIMINARY. USB1 / USB2 USB host interface to read data via memory stick. Bus Out (system bus) For connection to a router
sales@jumo.co.uk info@jumo.us Data sheet 705060 Page 1/12 JUMO mtron T Measuring, Control, and Automation System Multifunction panel 840 Brief description The multifunction panel 840 has a touchscreen
More informationJ itron DR 100. B Operating Manual. Compact Microprocessor Controller. Type /
Type 702060 J itron DR 100 Compact Microprocessor Controller B 70.2060.0 Operating Manual 06.08/00438833 1 Identifying the instrument version........................................... 4 2 Mounting................................................................
More informationThermocouples Resistance thermometer Resistance transmitter Potentiometer Voltage Current. for floating contacts or PLC level Functions:
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJUMO TDA-300 and JUMO TDA-3000 Handheld Thermometer with data logger
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationCompactFlash memory card for. measurement and configuration data. Interface for. measurement and configuration data. Setup interface.
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationJ dtron 304 J dtron 308 J dtron 316. B Operating Instructions Compact Controller with program function. JUMO dtron 316 JUMO dtron 308
JUMO dtron 316 JUMO dtron 308 JUMO dtron 308 JUMO dtron 304 J dtron 304 J dtron 308 J dtron 316 Compact Controller with program function B 70.3041.1 Operating nstructions 06.05 Contents 1 Preface... 3
More informationDINALOG A 144 x 36 A1400 Light-Strip Indicator
DINALOG A x 6 A00 Light-Strip Indicator -9-0-0 /.00 Front panel dimensions: x 6 mm Light-strip indicator with 7 high-contrast LEDs Red LED display color Digital display range for portrait format: 999 to
More informationJUMO TYA 201 Single-Phase SCR Power Controller For controlling resistive/inductive loads
Data sheet 709061 Page 1/21 JUMO TYA 201 Single-Phase SCR Power Controller For controlling resistive/inductive loads The JUMO TYA 201 represents a consistent further development of the JUMO power controller
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationJUMO itron. B Operating Instructions. Compact microprocessor controllers. Type Type Type Type
Type 702042 Type 702044 Type 702041 Type 702043 Type 702040 JUMO itron Compact microprocessor controllers B 70.2040 Operating Instructions 2008-11-11/00357918 Please read these Operating Instructions carefully
More informationIndicomp 4 Bargraph Indicator
Data Sheet 10/30-2.16-EN Indicomp 4 Bargraph Indicator Display is optionally LCD active: self-luminuous green on black self-luminuous green on blue LCD passive: self-luminuous black on light grey 2 input
More informationJUMO dtrans T02. programmable. transmitter. B Operating Instructions 5.00/
JUMO dtrans T02 programmable transmitter B 95.6521 Operating Instructions 5.00/00380664 Overview of operation JUMO dtrans T02 Standard accessory 1 Type designation (1) Basic version 956521 programmable
More informationJUMO di 308. Digital Indicator. B Interface Description Modbus 12.07/
JUMO di 308 Digital Indicator B 70.1550.2.0 Interface Description Modbus 12.07/00485372 Contents 1 Introduction 5 1.1 Preface... 5 1.2 Typographical conventions... 6 1.2.1 Warning signs... 6 1.2.2 Note
More informationJUMO mtron T Measuring, Control, and Automation System
Data Sheet 705001 Page 1/10 JUMO mtron T Measuring, Control, and Automation System Central processing unit Brief description The central processing unit is the heart of the system. It contains the process
More informationDS 96/48 PK. Digital indicator. Manual 42/33-90 EN Rev. 00 DIM
DS 96/48 PK Digital indicator Manual 42/33-90 EN Rev. 00 A1 A2 DIM E DS 96/48 PK Digital Indicator Manual Document No. 42/33-90 EN Edition 06.01 Revision 00 Manufacturer: ABB Automation Products GmbH Höseler
More informationVoltage supply. AC 110 to 240 V +10/-15 %, 48 to 63 Hz AC/DC 20 to 30 V, 48 to 63 Hz. Interfaces
DATAVU 6 Datasheet The DataVU 6 paperless recorder features a resistive touchscreen and an intuitive, icon-based operation and visualization concept that makes it very easy to use. There are different
More informationJUMO TYA 201 Single-Phase Thyristor Power Controller For controlling resistive/inductive loads
Data sheet 709061 Page 1/21 JUMO TYA 201 Single-Phase Thyristor Power Controller For controlling resistive/inductive loads The JUMO TYA 201 represents a consistent further development of the JUMO power
More information1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882
1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882 This manual is intended for use in support of installation, commissioning and configuration of the 1/32-DIN Temperature
More informationJUMO TYA 202 SCR Power Controller in a three-phase economy circuit For the continous control of ohmic-inductive loads
Data sheet 709062 Page 1/17 JUMO TYA 202 SCR Power Controller in a three-phase economy circuit For the continous control of ohmic-inductive loads The JUMO TYA 202 represents a consistent further development
More informationJUMO LOGOSCREEN fd. Secure Data Management and FDA-Compliant Measured Data Recording. B Installation Instructions /
JMO LOGOSCREEN fd Secure Data Management and FDA-Compliant Measured Data Recording B 706585.4 Installation Instructions 2013-10-23/00586157 Contents 1 Introduction 5 1.1 Preface... 5 1.2 Arrangement of
More informationJUMO ecotrans ph 03 Microprocessor transmitter/ switching device for ph/redox voltage and temperature
Page 1/7 JUMO ecotrans 03 Microprocessor transmitter/ switching device for /Redox voltage and temperature with a 2-line LCD for mounting on a 35 mm DIN rail Brief description Depending on the configuration,
More informationPaperless recorder with TFT display, CompactFlash card and USB interfaces
JMO GmbH & Co. KG Delivery address:mackenrodtstraße 1, 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: 9 661 600-0 Fax: 9 661 600-607 e-mail: mail@jumo.net Internet: www.jumo.net JMO Instrument
More informationJUMO STB/STW Safety temperature limiter, Safety temperature monitor as per DIN EN 14597
Data heet 701150 age 1/13 JUMO TB/TW afety temperature limiter, afety temperature monitor as per DIN EN 14597 Brief description The safety temperature limiter (TB) and the safety temperature monitor (TW)
More informationData Sheet T 6493 EN. TROVIS 6400 Automation System TROVIS 6493 Compact Controller. For panel mounting (front frame 48 x 96 mm/1.89 x 3.
Data Sheet T 6493 EN TROVIS 6400 Automation System TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and
More informationPU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance
PU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance red display of -9999 99999 digits installation depth: 120 mm without
More informationAPPLICATIONS. Furnaces and ovens Burners and boilers Weighing and batching Process control Plastics processing... DESCRIPTION
Digital 280-1 Digital Indicator BluePort Front interface and BlueControl Software Maintenance manager and error list Large 5-digit display Limit values with hysteresis, time gate and gradient ON/OFF and
More informationISOMETER isoev425 with coupling device AGH420
with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles Preliminary datasheet isoev425_d00126_02_d_xxde/09.2015 with coupling device
More informationJUMO Quantrol LC100/LC200/LC300
JUMO Quantrol LC100/LC200/LC300 Universal PID Controller Series B 702030.2.0 Interface Description Modbus 2013-05-27/00600589 Content 1 Introduction................................................ 5 1.1
More informationThe PM1000 series is a universal 4 digit LED plug-on display for transmitters with 4-20mA 2 wire output and fitted with DIN43650 connector.
PM1000 SERIES PLUG-ON DISPLAY BRIGHT LED DISPLAY INDICATION RANGE -999 TO +9999 FITS TO DIN 43650 CONNECTOR PLUG-ON TO ANY TRANSMITTER WITH 4-20MA OUTPUT EASY TO SCALE ON SITE ROBUST DESIGN SET POINT OPTION
More informationA2000 Multifunctional Power Meter
3-348-980-03 3/12.99 Capable of communications via Profibus-DP, LONWORKS interface or RS 485 interface (depending upon model) Measurement of current, voltage, active, reactive and apparent power, power
More informationPower supply V AC or V AC/DC. I/O card (extra code) 4 logic inputs states can be graphically represented
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationJUMO dtrans AS 02. Transmitter/controller for standard signals and temperature
sales@jumo.co.uk info.us@jumo.net Page 1/1 JUMO dtrans AS 0 Transmitter/controller for standard signals and temperature Brief description The JUMO dtrans AS 0 is a compact, modular instrument. It is highly
More informationB Operating Manual
JdTRON 16.1 Compact microprocessor controller B 70.3011 Operating Manual 04.04/00346816 Please read this Manual carefully before starting up the instrument. Keep this Manual in a place which is at all
More informationCompact universal controllers
7 867 Compact universal controllers RWF55... The RWF55 is used mainly for controlling the temperature or pressure in oil- or gas-fired heating plants. If the relevant parameters are set, the RWF55 can
More informationPHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
More informationQUINT-PS/ 1AC/24DC/ 5
Extract from the online catalog QUINT-PS/ 1AC/24DC/ 5 Order No.: 2866750 DIN rail power supply unit 24 V DC/5 A, primary switched-mode, 1- phase. The SFB technology (Selective Fuse Breaking Technology)
More informationRSTI-EP Slice I/O. Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3664, EP-3704, EP GFK-2960F September 2018
September 2018 Module Status LED Channel Status LEDs Digital Input Connector Ground 24 V DC FE Analog Input Module RSTI-EP Slice I/O Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3664,
More informationitemp TMT180 Technical information
Technical information itemp TMT180 Temperature head transmitter For resistance thermometers Pt100, settable using a PC, for installation in a sensor head Form B Application PC programmable (PCP) Temperature
More informationJUMO ctron 04/08/16. Compact controller with timer and ramp function. B Interface Description Modbus /
JUMO ctron 04/08/16 Compact controller with timer and ramp function 702071 702072 702074 B 70.2070.2.0 Interface Description Modbus 2008-08-11/00492538 Contents 1 Introduction 5 1.1 Preface... 5 1.2 Typographical
More informationAnalog outputs Output 1 + 2: 0(4) 20 ma or 0 10 V. Configurable as - analog process value output - continuous controller output (PID action)
Data Sheet 202560 Page 1/12 JUMO AQUIS 500 ph Transmitter/Controller for ph, ORP, NH 3 (ammonia) concentration and temperature Brief description The device is used for measuring/controlling the ph, ORP
More informationVoltage supply AC 110 to 240 V +10/-15 %, 48 to 63 Hz AC/DC 20 to 30 V, 48 to 63 Hz. Interfaces
Data Sheet 706520 Page 1/18 JUMO LOGOSCREEN 600 Paperless Recorder with Touchscreen Brief description The JUMO LOGOSCREEN 600 paperless recorder features a resistive touchscreen and an intuitive, icon-based
More informationTRACKER 220 SERIES. Digital Panel Indicators. A Complete Range of Universal Input Digital Panel Indicators for Temperature and Process Measurement
TRACKER 220 SERIES Digital Panel Indicators A Complete Range of Universal Input Digital Panel Indicators for Temperature and Process Measurement TRACKER 220 SERIES INDICATORS Universal Input Analogue Output
More informationJUMO ecotrans Lf 01/02
JUMO ecotrans Lf 01/02 Transmitter/Switching Device for Conductivity Operating Manual 20273100T90Z002K000 V5.00/EN/00435548 Content 1 Notes... 5 2 Identifying the device version... 6 2.1 Type designation...
More informationThe Tracker 220 Series A Complete Range of Universal Input Digital Panel Indicators for Temperature and Process Measurement
Acquisition Measurement Control The Tracker 220 Series A Complete Range of Universal Input Digital Panel Indicators for Temperature and Process Measurement TRACKER 220 SERIES INDICATORS Universal Input
More informationABB i-bus KNX HCC/S Heating/cooling circuit controller
ABB i-bus KNX HCC/S 2.2.1.1 Heating/cooling circuit controller Description of product The device is a modular DIN rail component (MDRC) in pro M design. It is intended for installation in distribution
More informationMeasuring transducers MI4x0 series Programmable transducers for RTD sensors MI450
Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 o Measuring of resistance of RTD sensors (Pt100, Pt1000, Ni100, Cu10,...) o Accuracy class up to: 0.5 o Programmable input
More informationISOMETER isoev425/isoev425hc with coupling device AGH420
with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles isoev425_d00126_04_d_xxen/06.2018 with coupling device AGH420 Insulation monitoring
More informationTransmitter / Controller Series J dtrans ph 01, Rd 01, Lf 01, Rw 01, Az 01
Transmitter / Controller Series J dtrans ph 01, Rd 01, Lf 01, Rw 01, Az 01 with C-UL-US approval PR 20004 GB ph mv ms/cm µs/cm M xcm Transmitter / Controller Series J dtrans ph 01, Rd 01, Lf 01, Rw 01,
More informationLineMaster 100. Continuous-line Recorder. ABB Instrumentation 10/ EN
LineMaster 100 Continuous-line Recorder 10/43-1.10 EN 1 to 4 measuring channels Format 144 mm x 144 mm; installed depth 250 mm Combined chart unit for roll chart (32 m) or folded chart paper (16 m) Measuring
More information- SELF-TUNING PID ALGORITHM - INTUITIVE COLOR DISPLAY WITH TEXT MESSAGING - UNIVERSAL PROCESS AND TC/RTD INPUTS - MULTI- FUNCTION RAMP- DWELL/PROCESS
ELK. ETK COMPACT BASIC CONTROL - SELF-TUNING PID ALGORITHM - INTUITIVE COLOR DISPLAY WITH TEXT MESSAGING - UNIVERSAL PROCESS AND TC/RTD INPUTS - MULTI- FUNCTION RAMP- DWELL/PROCESS TIMER - SOFT START OUTPUT
More informationMeasuring Amplifier DMS 50 Weight - Force - Pressure - Torque with strain gauges
+49-(0)40-670 73-0 Fax +49-(0)40-670 73-288 info@martens-elektronik.de www.ghm-messtechnik.de Measuring mplifier DMS 50 Weight - Force - Pressure - Torque with strain gauges Features M Bridge sensitivity
More informationLINETRAXX RCMS150. Residual current monitor type B with integrated measuring current transformers for earthed AC/DC systems (TN and TT systems)
LINETRAXX RCMS150 Residual current monitor type B with integrated measuring current transformers for earthed AC/DC systems (TN and TT systems) RCMS150_D00259_00_D_XXEN/09.2016 LINETRAXX RCMS150 Residual
More informationEngine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution
DATA SHEET Engine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.:
More informationRSTI-EP Slice I/O. Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3704, EP GFK-2960B November 2017
November 2017 Module Status LED Channel Status LEDs Digital Input Connector Ground 24 V DC FE Analog Input Module RSTI-EP Slice I/O Analog Input Modules `EP-3164, EP-3264, EP-3124, EP-3368, EP-3468 EP-3704,
More informationPI-EX-ME-2NAM/COC-120VAC
PI-EX-ME-NAM/COC-0VAC Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Relay Output, PDT, Two-Channel, 0 V AC Supply INTERFACE Data Sheet 0944_00_en PHOENIX CONTACT - 0/008 Description
More informationSX90 Process Controller
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSetpoint adjuster SG 9648 Output standard signals 0/ ma or 0/ V DC
adjuster SG 9648 Output standard signals 0/4... 20 ma or 0/2... 10 V DC Features M LEDDisplay 14.2 mm red M Display range ± 9999(0) digit M Indicating range and decimal point free programmable M Set point
More informationPI-EX-ME-2NAM/COC-24VDC
Ex-i NAMUR Isolation Amplifier, With Intrinsically Safe Input and Relay Output, PDT, Two-Channel, 4 V DC Supply INTERFACE Data Sheet 0033_0_en PHOENIX CONTACT - /007 Description The PI-EX-ME-NAM/COC-4VDC
More informationPointMaster 100. Multipoint Recorder 10/ EN
PointMaster 1 Multipoint Recorder 1/41-1.1 EN 6 Measuring channels Last dot visible from the front Measuring channels electrically isolated and ungrounded Connection of process signals / 4...2 ma,...1
More informationElectronic Preset Counter with 2 Presets and Print interface. NE213 Prog Features
Electronic Preset Counter with 2 Presets and Print interface NE21 Prog. 09 Features Order designation Order no. Interface RS22 Models Connection Functions LED-preset counter with 2 presets Batch counter
More informationJUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
More informationZelio Control-modular measurement and control relays 1
Presentation, description 1 106439 RM35 TM111MW Presentation Motor temperature measurement and 50MW and RM35 TM250MW monitor the following, on 3-phase supplies: correct sequencing of phases L1, L2 and
More informationMINI-DC-UPS/12DC/4. Extract from the online catalog. Order No.:
Extract from the online catalog MINI-DC-UPS/12DC/4 Order No.: 2866598 Uninterruptible power supply with integrated power supply unit, 4 A, in combination with MINI-BAT/12/DC 1.6 Ah or 2.6 Ah Commercial
More informationMINI MCR-SL-UI-2I-NC. Extract from the online catalog. Order No.:
Extract from the online catalog MINI MCR-SL-UI-2I-NC Order No.: 2864176 4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration
More informationTrident and Trident X2 Digital Process and Temperature Panel Meter
Sign In New User ISO 9001:2008 Certified Quality System Home Products Online Tools Videos Downloads About Us Store Contact Policies Trident and Trident X2 Digital Process and Temperature Panel Meter Products
More informationProduct and Applications Description. Note. Example of Operation. Installation Instructions. Application Programs WARNING
Product and Applications Description Note If the application program is not loaded completely by the ETS, you had better interrupt the 24 V voltage supply of the I/O-module during the loading interval.
More information02/11/2015
DIN Rail Mount 35 mm HSV Part number 84874320 Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - 3-wire PNP or NPN, Namur, voltage 0-30V or volt-free contact
More informationEngine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution
DATA SHEET Engine Control Unit, ECU 100 Engine control Engine monitoring and protection Easy-to-read graphical display Integrated emulation software solution DEIF A/S Frisenborgvej 33 DK-7800 Skive Tel.:
More information02/11/2015
DIN Rail Mount 22.5 mm ETM2 Part number 84874023 Version ETM : Controls temperature of machines using built-in PTC probes Line break or probe short-circuit detection Version ETM2 / ETM22 : Fault latching
More informationTemperature/Process Controllers Manual
3200 SERIES Temperature/Process Controllers Manual The innovative range of 3200 controllers offer precision control of temperature and other process variables together with a host of advanced features
More informationTHM501 PT100 MODBUS TEMPERATURE TRANSMITTER
THM501 PT100 MODBUS TEMPERATURE TRANSMITTER INTRODUCTION The TekOn Electronics In Head 2-Wire Temperature Transmitters are specifically designed to meet the most rigorous requirements of operation in the
More informationPSR-PC50. SIL 3 coupling relay for safety-related switch on. Data sheet. 1 Description
SIL 3 coupling relay for safety-related switch on Data sheet 105818_en_01 PHOENIX CONTACT 2014-08-18 1 Description The PSR-PC50 SIL coupling relay can be used for power adaptation and electrical isolation
More informationILBPB24DO32. Inline Block IO Module for PROFIBUS With 32 Digital Outputs. AUTOMATIONWORX Data Sheet 6889_en_04. Description
Inline Block IO Module for PROFIBUS With 32 Digital Outputs AUTOMATIONWORX Data Sheet 6889_en_04 Description PHOENIX CONTACT - 03/2007 & & ' ) The ILB PB 24 DO32 module is designed for use within a PROFIBUS
More informationAPU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET
APU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET Measurement input, auto range Up to 1000 V AC L-L Up to 12.5 A (sinusoidal) 16 400 Hz Output Up to four analogue outputs Relay output RS 485 Modbus
More information