Parblo Coast10 QUICK SETUP GUIDE. Drive download address.

Transcription

1 Parblo Coast10 QUICK SETUP GUIDE Drive download address

2 1. Package List SETUP GUIDE Parblo Coast10 Graphic Monitor 5 USB Cable 2 Battery-free Pen 6 Lanyard 3 3x Replacement Nibs 7 Setup Guide 4 One Remove Ring

3 2. Drive installation EN * Download the drivers from: * Open the driver file, please install Displaylink Driver firstly and the Graphic Monitor will display after you installed it. Then, please install the "Digitizer Driver" and go to the next step: Driver Setting. (Notes: There are two drivers for Parblo Coast10 Graphic Monitor, one is Digitizer Driver and the other is Diaplaylink Driver. If you are the computer users of Windows XP, please go to to download the newest Displaylink Driver.) 3. Driver Setting Windows System: * Find Tablet Setting in the start stray and go to Mapping, and then choose Monitor 2 in Select Monitor. If you have three monitors, please choose Moniitor3 and click Calibration to do pen calibation. * Afterwards, please go to Pen Setting and use the pen to draw in the Try Here area. If it has pen pressure, it means the driver installed successfully. You can also adjust the pressure sensitivity through the turntablet in the bottom right corner.

4 * The pen for Parblo Coast10 Graphic Monitor only has one shortcut key. And it is equall to the Right Key of your mouse by default. You can also personalize it in the area that the arrow pointed to. Mac System: * Find an icon like this. Then, click it to go to setting and click Region Setting to choose Monitor #2 in Monitor. If you have three monitors, please choose Monitor 3. * Go to Normal Setting and use pen to draw in the right blank area. If it has pen pressure, it means that the driver installed successfully. * You can adjust the pressure sensitivity through the button like below as the right picture shows..

5 EN * The pen for Parblo Coast10 Graphic Monitor only has one shortcut key. And it is equall to the Right Key of your mouse by default. You can also personalize it in the area that the arrow pointed to. 4. Product Overview Display and Pen touch area 2 USB Interface 3 Indictor Light 4 Pen Slot 5 Pen Holder

6 USB Cover 7 Kensington Lock 8 Stand 9 Rear Label Anti-slip Mat Caution: Please don t open the back cover by yourself,for maintenance, please get professional maintenance personnel Side Button: it is equivalent of right-key of a mouse when you keep the default setting. Pen Tip: When the tip gets too short or develops a sharp edge, you can replace it with one of the spare tips that come with the pen as FAQ12. Note: This interactive pen may be subject to change without prior notice. And product picture is for reference only; actual product may differ from the picture.

7 5. Product Specifications EN * Monitor Item Display type 10.1 IPS LCD Active Area 216.9X135.6mm LCD Display Resolution Pixel pitch mmX0.1695mm Display colors 16.7M Viewing angles right 89, left 89, up 89, down 89 Power Type USB5V/1A Unit dimension 290(L)*210(W)*18.5(H)mm Apperance Unit weight Net 0.63kg, Gross 1kg OS OS compatibility Windows XP/VISTA/7/8 MAC and above Temperature Operating: 0~40 C, Storage: -20~60 C Environm-ent Relative humidity Operating: 20~80%, Storage: 10~90%

8 * Touch Item Tablet I/O port Resolution 2048 LPI Tracking speed 200 RPS Pressure 2048 levels sensitive Communication USB Pen Type Wireless Passive mode, Without Battery Note:

9 FAQ 1. Q: How to connect the computer with the monitor through the USB cable? A: Please use one side that with two interfaces to connect with your computer and the other side to connect with the monitor. If the indicator light of the Graphic Monitor is on, it means that you did a successful connection. (Notes: This USB cable has two sides; there are two interfaces in the one side and only one interface in the other side. For the side that with two interfaces, there is a point that you need to pay attention to: The slimmer Cable is designed to avoid the insufficient electricity supply, you can connect it according to your needs.) EN 2. Q: Why the indicator light didn t on after connecting through the USB cable? A: Please check whether the USB connector of your computer is good or not? You can use one of your USB port (Refereed as USB01 later) on your desktop/ laptop to charge your phone or connect your mouse. Please repeat to check another USB port (Refereed as USB02 later). Then, please confirm they are workable or not. 3. Q: Where do I download the drivers for Parblo Coast10 Graphic Monitor? A: Please download the drivers in (Notes: There are two drivers for Parblo Coast10 Graphic Monitor, one is Digitizer Driver and the other is Diaplaylink Driver. If you are the computer users of Windows XP, please go to to download the newest Displaylink Driver.)

10 4. Q: How to install the drivers? A: Open the Driver Files downloaded, please install the Displaylink Driver firstly and Digitizer Driver afterwards. The monitor displays after you installed the Displaylink Driver. And please do the pen calibration after installed the Digitizer Driver; if there is pen pressure sensitivity, it means that you did a successful driver installation. (Notes: If your computer is Windows, please switch off any of anti-virus software of your computer/laptop and uninstall any tablet drivers of others tablet before you install the diver.) 5. Q: What can I do if I cannot install the driver in the Mac system? A: Please open the System Preferences of your computer and go to Security and Privacy to choose Anywhere. 6. Q: What can I do if there is obvious lap between pen nib and cursor? A: Windows: Open the Tablet Setting in the start stray and go to the Mapping to choose Monitor 2 in Select Monitor ; if you have three displays, you need to choose Monitor 3. If there is still a subtle lap, please click Calibration to do pen calibration. Mac: Open Driver Setting and go to Region Setting to choose Monitor 2 in Monitor ; if you have three displays, you need to choose Monitor 3. If there is still a subtle lap, please click Auto Calibration or Default to do pen calibration. Note: Because there is a thick glass between the pen tip and the pen touch area,

11 EN so it is the normal phenomenon that you have a slightly optical parallax when you use the pen to draw in the monitor. There is a tip to tell you how to judge whether the product is good or not: please put the pen draw in the monitor in a vertical way and watch whether the pen tip is coincident with the cursor right above. If so, it means that the product is workable in function. 7. Q: Why it appear black shadow around the monitor once the monitor displays after installing the Displaylink Driver? A: Because of the insufficient electricity supply, the monitor can t be light on completely and it will disappear after several minutes. 8. Q: What can I do if my computer can t restart functionally or the monitor can t display after restarting computer or even the pen can t work? A: If your computer can t restart, please pull out the USB cable and shutdown it forcedly. Afterwards, please uninstall the existing driver and reinstall the driver again. (Note: If your computer can reboot, you only need to uninstall the existing driver and reinstall the driver again.) 9. Q: What can I do if the installed driver can t be uninstalled? A: Please pull out the USB cable firstly. Then, restart the computer and try to uninstall the driver again.

12 10. Q: What can I do if there is no pen sensitivity pressure in my frequently-used paint software? A: Please test the pen pressure in other paint software, if it has pen pressure in those softwares meaning that you need to set pen pressure sensitivity manually, or the current version of your frequent-used paint software isn't compatible with Parblo Coast10 Graphic Monitor. If not, please find the Pen Setting in the Tablet Setting, and then use the pen draw in the right area to test the pen pressure. If it has pen pressure, it means that the driver installed successfully; if not, you need reinstall the driver. 11. Q: Where can I do the Monitor Display Setting? A: Generally speaking, you can find a Displaylink Driver icon after you installed the Displaylink Driver in the top/bottom right corner. Then, please click it and choose Extend / Mirror / Extend to according to your needs. 12. Q: How to replace the pen nibs? A: When the pen tip gets too short or develop a sharp edge, you can replace it with the spare tips. Please following the following steps * Use the removal tool to pull the old tip straight out the pen. * Insert a new pen tip into the stylus pen and push the tip until it stops. (Note: Tip replacement toll and spare tips are included.)

13 JP SETUP GUIDE

14

15 JP

16

17 JP 1 1

18

19 JP

20

21 JP

22

23 JP

24 How to contact us? If you have any question, please check: Parblo Official Website: Parblo Official Facebook: Support Group: (D-Painting Communication Group)