User manual of WIFI camcorder

Transcription

1 User manual of WIFI camcorder 一 Attention: 1. Please strictly abide by the relevant national laws; this product may not be used for illegal purposes, otherwise take the consequence by yourself. 2. Please insert the card according to the right direction to avoiding damage the card or DVR. 3. We suggest that clean files in the card once a week. This product is not the exclusive storage device, please back up the important files to computer or other storage device immediately to avoid file is missing. 4. Please check the bracket carefully after installation to avoiding damage caused by bad installation. 5. The working time of the battery will get shorter with the using time increase. If the DVR had not been used for a long time, please charge it before using. 6. Place don not take the product under the moist environment. It is not waterproof. 7. Please do not to take pictures or record directly to the sun to avoid damage the optical devices. 8. Please do not use this product in excessive dust environment, in case of the lens and other component be contaminated and affect the camera effect. Please keep lens clean to use the mirror paper and glasses cloth to wipe gently. 9. This product belongs to precision electronic products, please do not intensity impact, vibration and do not use in high magnetic field and electronic field.

2 Product structure: 二 Product feature: 1. Multifunctional wifi camcorder 2. High resolution lens 3. Mobile remote monitoring and real-time view 4. Internet real-time takes videos/ monitoring 5. Have photo and video function 6. Two wireless mode: Direct mode and P2P mode 7. Support maximum capacity micro SD card. 8. Seamless loop recording, delete old file and record new file automatically. 三 Operating mode : 1)Video mode: In this mode is a camera, which can take real-time audio video and records the live memory. 2)Photo: Take live-action pictures 3)Direct mode: AP mode, take wifi camcorder as assess point to connect mobile phone, support view and control at short range without network. 4)P2P mode(service mode): Use mobile service or PC platform to connect to WIFI camcorder by Router/WIFI hotspot/3g/internet,realize to remote real-time view and operate.

3 Direct mode P2P mode 四 The operation of charge and ON/OFF: 1.Charge Insert 5V power source to the machine Micro USB interface, machine will power on and charging. TF card slot bottom bright red indicator in charging process and turn off after finished charge.it is indicate electric insufficient when the front state panel of red indicator flash quickly in the using process. Note: Suggest charge above 8 hours for first charging or reuse before a long time not to use. After that, normal charging time is about 3 hours. 2. ON/OFF: Long press power button3 seconds, four modes light long bright and turn on the machine. Finished the machine start, enter into the last time to shutdown mode. Long press power button 3 seconds, the machine will power off. Must be the machine finished turn on and to turn it off then. Note: Please to pull out the external power and reboot, when insert the external power and the machine can not to reboot after shutdown. Short press mode button in standby mode: Loop switch between video mode, photo mode, direct mode and P2P mode. It will send out the sound of "du" when switch successfully. 五 Specific function of each mode: A. Instructions of before use Please insert the micro SD card in the shutdown state before use, long press power button 3 seconds and the 4 indicator bright at the same time, for a while, the single mode light long bright and enter into the front of shutdown mode. In standby mode, short press MODE button can loop switch between videophoto-direct mode-p2p mode. Indicate switch mode successful when the speaker send out of "du". B. Download and install application program of direct mode and P2P mode Should install application program when WIFI camera use direct mode and service mode, this application program support to the client currently: Iphone and Tablet PC (IOS4.0 or above), Android system mobile devices (Android4.0 or above). To download the client application in: enter into official website which have download website on the front page by scanning two-dimension code. According to the mobile phone system to scan two-dimension code, enter into download center to download Myanycam. You can use mobile phone to search and download Myanycam in application market also. After download and install Myanycam in APP center, open Myanycam in the mobile phone or mobile device. Need to register when log in Myanycam at first time, import and password to log in if you have account. Note: Please press OK button and MODE button at the same time, the machine will reset and return to normal if press keys failure or cannot turn on/off. If the corresponding device password forgot in the application, you can long press OK button 8 seconds in AP (Direct mode), then the machine password will revert to the default. Suggest you to restart the machine.

4 一. IOS system 1. Video mode Long press power button 3 seconds, four indicators light long bright and turn on the machine. Corresponding mode indicator will bright and take video automatically when turn on the machine successfully. Press mode button switch into mode when the machine at other mode. After the mode light flash and long bright, the machine will have reminder voice, then press OK button at top to take video. Blue indicator flash slowly when take video, press again to stop take video. The photo files storage into video file of micro SD card. 2. Photo mode Switch into photo mode after turn on the machine and the corresponding mode indicator bright, press OK button at top to take photo. The corresponding blue indicator flash once when take photo. The photo files storage into picture file of micro SD card. 3. Direct mode(wifi mode) Turn on camcorder and switch into direct mode when the phone or device installed application software, mode indicator long bright, open WIFI to search the name of MyanyCamxxx. The connect password is and the blue indictor long bright when connected successfully. When real-time view the video or intercom though mobile phone, the green indictor flash slowly.

5 Touch screen, appeared three virtual buttons as follows: Click this icon turns into speaker on Click this icon can monitor scene sound. Press volume button to adjust sound volume. Click this icon to take photo( when the machine haven t card,it will displayed :Please Insert Micro SD card into camera) Click this icon to take video( when the machine haven t card,it will displayed :Please Insert Micro SD card into camera) The bottom four set items: View pictures real-time. It is real-time view in server mode. It is real-time view in server mode. It has several menu sets in this item, as follows: Camera information: Amend camera password Serial number :xxxxxxxxxxxxxxxx Type:Software type Time zone: UTC* Select WI-FI: In direct mode, switch and confirm the target network that camera need to access. Ethernet setting: Gateway and IP setting Video setting: 7*24H/alarming video Image rotation180: The image will reversal after image setting. Reboot the device: The machine will restart after sets and confirm. 4. P2P mode (Service mode) 4-1)Before camcorder use P2P mode at first time, it should specify a fixed wireless access points at AP mode. Repeat enter into direct mode operation, according to the following operation:

6 A. Select setting item at the bottom right corner in video windows interface, select WIFI item then. B. Select WIFI network that machine needed to connect in network list (default encryption way). C. Import password and confirmed, WIFI camcorder switch into service mode after APP confirmed. The machine has du sound after the machine switches successfully, connect appointed wireless access points automatically and the blue indicator long bright after connect successful. Note: Please confirm the router broadcasting function whether open or reset the encryption method if the wireless router access point cannot to display in menu. (This product not supported more advanced or special encryption way, the router name and password only supported 0-9 A-Z a-z _ - * etc ASCII code, not supported Chinese.) 4-2)Add camera Switch into WIFI successful at AP mode, open Myanycam in mobile phone, and click to add camera. Fill SN number into corresponding frame, default password is and named the camera for easy management (need to ask for password meanwhile if the added camera SN number is shared by friends) and scanning bar code that click the two-dimension at the right of SN dialog box, fill the password to confirm. Mobile phone can add several cameras SN. If you want to delete the camera in the list,you can long press the selected corresponding camera and enter into delete interface to delete directly. Here are a few options, we click the camera we want to view in the camera list after added the camera, respectively is: A. Camera Click play button to real time view video, click screen will pop up function button when real-time view video: Click this icon turns into volume., send the voice to mobile phone. Press the volume button to adjust

7 Click this icon turns into, send mobile phone voice to the machine Click this icon to take photo. The photo files storage into mobile phone photo album and picture file of camcorder micro SD card. After finished take photos can real time share and release to friends. Click this icon to take video. When recording, the red indictor flash and the blue light flash at the same time. The video files storage into video file of micro SD card. B. Events: There are two options in events that photo album and video. APP will received push message when open the alarming settings. In "photo album" list, confirm download and view it after selected the date and time of want to view photos. You can view and download the passed events file in video setting. (File storage capacity is determined by the storage card capacity) C. Photos: Open the photos that you want to browse in photo view list, click this icon at the bottom of left corner to share and release to friends. Note: In IOS system, click setting-options-privacy-photos to open Myanycam when save the pictures into mobile phone. D.Setting: There are several options in this setting. Camera information: Modify the name of camera and increase description of the camera at the same time. Video setting: Take video automatically and alarm video. Alarm setting: Have motion detection and noise detection function when open alarm function. If the cameras have moving object or big voice scene changes, the machine will recording videos and sending push message to mobile phone. Image rotation180: The image will spin and reversal. Serial number :xxxxxxxxxxxxxxxx Machine serial number Reboot the device: WIFI camera will restart after sets and confirm. 4-3: In P2P mode, long press MODE button 8 seconds in the process of real-time view, the machine will send a intercom request, to select Accept or Reject in mobile phone, you can realize mobile phone and machine intercom real-time when choose "accept". 二. Android system Video mode and photo mode is the same as IOS system 1. Direct mode(wifi mode) Turn on camcorder and switch into direct mode when the phone or device installed application software, mode indicator long bright, open WIFI to search the name of MyanyCamxxx. The connect

8 password is and the blue indictor long bright when connected successfully. When real-time view the video or intercom though mobile phone, the blue indictor flash slowly. Touch screen, appeared three virtual buttons as follows: Click this icon turns into speaker on Click this icon can monitor scene sound. Press volume button to adjust sound volume. Click this icon to take photo( when the machine haven t card,it will displayed :Please Insert Micro SD card into camera) Click this icon to take video( when the machine haven t card,it will displayed :Please Insert Micro SD card into camera) The bottom four set items: View pictures real-time. It is real-time view in server mode. It is real-time view in server mode. It has several menu sets in this item, as follows: Camera information: Amend camera password

9 Serial number :xxxxxxxxxxxxxxxx Manufacturer: XXX Time zone: UTC* Video setting: To setting under direct mode/ P2P mode. This set is useful under P2P mode. Image rotation180: The image will spin and reversal. Wireless setting: Gateway and IP setting switch access point network. In direct mode, switch and confirm the target network that camera need to access. Reboot the device: The machine will restart after clicked and confirmed. 2. P2P mode (Service mode) Before camcorder use P2P mode at first time, it should specify a fixed wireless access points at AP mode. Repeat direct mode, switch between wireless setting in setting item and fixed wireless access points. Specific operation as follows: A)Select setting item at the bottom right corner in video windows interface, select wireless setting B)Select WIFI network that machine needed to connect in list (default encryption way) C)Import password and confirmed WIFI camcorder switch into service mode after APP confirmed. The machine has du sound after the machine switches successfully, connect appointed wireless access points automatically and the blue indicator long bright after connect successful. Note: Please confirm the router broadcasting function whether open or reset the encryption method if the wireless router access point cannot to display in menu. (This product not supported more advanced or special encryption way, the router name and password only supported 0-9 A-Z a-z _ - * etc ASCII code, not supported Chinese.) D) Add camera Switch into WIFI successful at AP mode, open Myanycam in mobile phone, and click to add camera. Fill SN number into corresponding frame, default password is and named the camera for easy management (need to ask for password meanwhile if the added camera SN number is shared by friends) and scanning bar code that click the two-dimension at the right of SN dialog box, fill the password to confirm. Mobile phone can add several cameras SN. You can add many cameras,if you want to delete camera in the list,long press the selected corresponding camera and will popup delete dialog. According to the instructions to operate. E)After finished add camera, we click the need camera in camera list, there are several options, respectively as follows: 1. Camera Click play button to real time view video, click screen will pop up function button when real-time view video:

10 Click this icon turns into volume, send the voice to mobile phone. Press volume button to adjust Click this icon turns into, send mobile phone voice to the machine Click this icon to take photo. The photo files storage into mobile phone photo album and picture file of micro SD card. Can click on the video, at the same time the machine blue lights flashing.file stored in the storage card "video" folder. 2. Events: There are two options in events that photo album and video. APP will received push message when open the alarming settings. In "photo album" list, confirm download and view it after selected the date and time of want to view photos. You can view and download the passed events file in video setting. (File storage capacity is determined by the storage card capacity) 3. Photos: Open the photos that you want to browse in photo view list, click this icon at the bottom of left corner to share and release to friends. 4. Setting: There are several options in this setting. Camera information: Modify the name of camera and increase description of the camera at the same time. Video setting: Take video automatically and alarm video. Alarm setting: the cameras have moving object or big voice scene changes when open alarm function, the machine will recording videos and sending push message to mobile phone. Image rotation180: The image will spin and reversal. Serial number :xxxxxxxxxxxxxxxx Machine serial number

11 Firmware versions: Current versions of the machine. Reboot the device: WIFI camera will restart after sets and confirm. 5.In P2P mode, long press MODE button 8 seconds in the process of real-time view, the machine will send a intercom request, to select Accept or Reject in mobile phone, you can realize mobile phone and machine intercom real-time when choose "accept". 六. Web users Import website: will display homepage. User can log in web mode for each operation. Please register first if you haven t account, input account and password in the account bar to login after the registration.

12 1. Camera list In the interface of my camera web page, click to add serial number of two-dimension, defined user s name. Input the correct password and remark, click Addition return to camera list page, select the corresponding name in the camera list and to watch the video scene. Click management list to modify and delete if you want manage the camera. enter into camera 2. Playback: Select the corresponding camera at the upper right corner of the page camera list, select the file wanted to view in alarm list or record list, enter into playback or delete. You can operation by or to select other cameras. 3. Setting: Camera: Define and modify the name Reboot: Control the camera to start

13 Spin: Overturn images settings Alarm Settings: set the switch function and alarm push message way Alarm function: ON/OFF Motion detection: ON/OFF Noise detection: ON/OFF All day alarm: ON/OFF Segment alarm: ON/OFF 七 Camera specification Imaging sensor: HD720P/30fps Lens aperture: F2.2 FOV: 70 wide angle Focus range:25cm--- Wireless standard::ieee b/g/n Wireless mode: Direct mode/p2p mode PC WIFI Video: 1280*720P Movement WIFI video: : 1280*720P Storage medium: : Micro SD/SDHC/SDXC(UP to 32GB) Battery: Polymer 600 ma/h PC system requirements Microsoft Windows XP/Vista/ 7/8 Intel /AMD 2 core CPU or above 1GB system memory 2GB freedom system hard drive space Mobile phone Apple ios: 4.0 above Android:4.X above WARM TIP: Due to the function update, client APP content will be not the same with manual, be subject to new software update content. This manual content is for reference only. Please reference the following tips can help you to solve some problems when you come up some phenomenon and problems in install progress. Please consult our service when you come up new problems or confused place. 1. Why dose the machine have insert Micro SD card but video file does not exist?

14 This phenomenon happened due to insert card in the case of the machine is operation, rebooting the machine and the video will storage normally. This machine not supported to insert or pull in operation, please insert or pull memory card when the machine shutdown. 2. Machine switch into P2P mode, mobile phone enter into P2P mode, why can't see the add SN machine online? At first, it may be the password is not correct when the machine connect to access point, you can repeat operation to verification and validation. Another reason is the machine is not start in WIFI mode machine access point, loop switch the machine to WIFI mode, set specified WIFI access point and confirm using mobile phone, the machine can access to P2P mode by switching to the server mode, 3. How to recover WIFI camera password when the password is forgot? Switch into direct mode after started the machine. In standby state, long press MODE button 8 seconds, the machine recover to default sets, please reboot the machine and resetting.this function is in improvement. 4. In direct mode, the machine can be seen the list, why the connection is always not successful? This is mobile phone has been connected the same name WIFI camcorder, mobile phone remember the password of the last connection camcorder, to reconnect after delete or ignore the camera name in the mobile terminal. 5. How to deal with that watch the video is not smooth? As the wireless video have higher request to transmission network, you can turn down the video pixel to improve video fluency. 6. Why cannot see photos in photo mode? A. It is limited by system in Iphone IOS system, you save the pictures into mobile phone by clicking setting-options-privacy-photos to open Myanycam when. B. In Android system, you can view photos by clicking events enter into photo to download the needed photos. 7: the camera don't remember how the query to the SN number? Switch to WIFI mode to the machine, open the phone WIFI (WLAN) function to find the camera and connect, then open the Myanycam application software.in the "Settings" - camera information - serial number can see the SN number machine. 十 Product accessories Following accessories is for reference only, please subject to actual accessories. Our company reserves the modification right.

15