Please check our web site for the most up-to-date information.
|
|
|
- Mark Cunningham
- 5 years ago
- Views:
Transcription
1 Vibration Isolation Platform A Vibration Isolation Platform (VIP or Platform) cuts off the transmission of vibrations from the tabletop or counter top into a precision instrument or piece of equipment that sits on top of the Platform. Examples of precision instruments and equipment that are candidates for isolation with a Vistek VIP include microscopes, sample preparation tools, and hardness testers. Vistek isolation technology is superior to air technology. First, Vistek Platforms are passive, mechanical and maintenance free. There are no air hoses or supporting hardware required. Second, Vistek Platforms isolate effectively for the horizontal and vertical vibration components. The superior performance of the Vistek Platforms in all six degrees of freedom combined with the products compact and elegant design makes the Vistek Platform the best choice for eliminating unwanted vibrations. The Platform is comprised of a black powder coated steel plate and three or four Vistek Vibration Isolation earings. There are two series of Platforms: The Series 320 VIP and the Series 3200 VIP. Series 320 VIP - Rectangular shaped Platforms with three of four Vibration Isolation earings. The Platform is available in the following sizes: 12 x 18, 16 x 16, 18 x 24, and 24 x 30. For each of these platform sizes, there exists a specific part number that should be selected depending upon the weight of the instrument to be isolated. Series 3200 VIP - The Platform design matches the footprint of the specific instrument you wish to isolate. Vistek manufactures Series 3200 VIPs for microscopes by Carl Zeiss, Leica Microsystems, Nikon and Olympus, and for hardness testers by Wilson Instruments. Please check our web site for the most up-to-date information.
2 Vibration Isolation Platform Series 320 Vibration Isolation Platform Vistek s isolation technology is superior to air technology. First, Vistek vibration isolation platforms are passive, mechanical and maintenance free. There are no air hoses or supporting hardware required. Second, Vistek bearings isolate effectively for the horizontal and vertical vibration components. The superior performance of the Vistek bearings in all six degrees of freedom makes the Vistek isolation platform the best choice for eliminating unwanted vibrations. Virtually any type of scientific instrument may be positioned on the Series 320 Vibration Isolation Platform. Instruments such as microscopes, hardness testers, measuring devices, and digital imaging systems, are all applications for a bench top or tabletop platform. Standard sizes are 12 x 18, 16 x 16, 18 x 24 and 24 x 30 for general use. Custom shapes and sizes are available on request. Please check our web site for the most up-to-date information
3 Series 320 Isolation Vibration Platform Selecting the Correct Part Number In order to select the correct part number, you will need to know the weight of the instrument to be isolated and the plan dimensions of the base of the instrument. Understanding the Part Number System The Vistek PN system is very simple. Once you understand it, it will be easy to select the correct part number from the Size Selection Chart. The Size Selection Chart is printed in an organized manner in categories determined first by the plan dimensions of the platform plate. Within the plate dimension categories, numerous part numbers can be selected depending upon the weight of the instrument to be isolated. Selecting the Correct Part Number is a Two-Step Process. Step No. One Determine the plan dimensions of the smallest plate that the instrument will fit on. The VIP320 series is available in the following plate sizes: 12 x 18, 16 x 16, 18 x 24, and 24 x 30. Step No. Two From the Size Selection Chart, select a platform with the proper plate dimensions that has a payload range that brackets the weight of the instrument to be isolated. If you have more than one choice, then select the platform that has a payload mid-range weight isolating capacity that is closest to the weight of the instrument to be isolated. Example - Microscope weighs 60 lbs., and the microscope base footprint is 11 x 15. ou can select either a 12 x 18 or a 16 x16 plate. ou should select either the VIP or the VIP Sample PN: VIP These numbers designate the payload range that the platform will isolate; 15 to 70 lbs in this example. These numbers designate the plate plan dimensions; 16 x 16 in this example. This alphanumeric designation tells you the product classification and series; VIP for Vibration Isolation Platform in this example, and this is the Series 320. Please check our web site for the most up-to-date information.
4 Series 320 Vibration Isolation Platform Size Selection Chart Part Number Min Max VIP (7) 55 (25) VIP (14) 80 (36) VIP (25) 90 (41) VIP (34) 125 (57) VIP (54) 175 (79) VIP (61) 210 (95) VIP (73) 300 (136) VIP (7) 70 (32) VIP (11) 80 (36) VIP (23) 90 (41) VIP (32) 120 (54) VIP (52) 170 (77) VIP (59) 205 (93) VIP (70) 300 (136) Material Specification Material: lack, powder coated steel plate supported by four Series 320 Vibration Isolation earings (VI320 bearings). Exception The VIP is supported by three VI320 bearings. Exception The VIP A-xxxx part nos. are comprised of four VI320 bearings and a black anodized, aluminum plate. VI320 bearings are manufactured from hardened alloy steel with nickel Teflon coating, and anodized aluminum. Performance: Passive, mechanical vibration isolation; no air hoses or hardware required. VIP (1) 60 (27) VIP (14) 70 (32) VIP (23) 105 (48) VIP (43) 150 (68) VIP (50) 185 (84) VIP (61) 280 (127) VIP (0) 40 (18) VIP (9) 75 (34) Shipping Weight: Part No. Prefix Lbs (Kgs) VIP xxxx 31 (14) VIP xxxx 35 (16) VIP xxxx 54 (25) VIP xxxx 86 (39) VIP A-xxxx 35 (16) VIP (29) 120 (54) VIP A (11) 80 (36) VIP A (23) 90 (41) VIP A (32) 125 (57) VIP A (52) 170 (77) *Vistek reserves the right to add or subtract part numbers as customer needs dictate. Please consult the web site or Vistek for an up-to-date Size Selection Chart. VIP A (59) 205 (93) VIP A (70) 300 (136) January 2008 Please check our web site for the most up-to-date information
5 THE VIRATION ISOLATION EARINGS ON THE SERIES 320 PLATFORMS CAN E CONFIGURED INSEVERAL WAS. THE PLATES ARE PRE-DRILLED WITH HOLE PATTERNSSO THE USER MA CHOOSE THEPATTERN THAT MAKES EST USE OF THEIR COUNTERTOP OF TALETOP SURFACE. THESEDIAGRAMS (NOT TO SCALE) SHOW THE MOST COMMON EARING PATTERNS AND THE RESULTING PLAN DIMENSIONS. REVISIONS REV. DESCRIPTION DATE APPROVED D 1 PRODUCT 1 VIP SEE DRAWING FIGURE 1 VIP ALL OTHERS 12 (30) 19 (48) 18 (46 VIP ALL 16 (41) 23 (58) 16 (41) VIP ALL 18 (46) 25 (64) 24 (61) VIP ALL 24 (61) 31 (79) 30 (76) 12 (30) 19 (48) D 18 (46) C C 21.5 (55) 1 PRODUCT 1 VIP SEE DRAWING FIGURE 1 VIP ALL OTHERS 12 (30) 18 (46 25 (64) VIP ALL 16 (41) 16 (41) 23 (58) VIP ALL 18 (46) 24 (61) 31 (79) VIP ALL 24 (61) 30 (76) 37 (94) FIGURE 1 1 HEIGHT OF PLATFORM OVER TALE VARIES FROM 1.3" (33 mm) TO 1.8" (46 mm) A 1 CUSTOMER APPROVAL 8 DATE CATALOG NO. 7 PRODUCT 1 1 VIP SEE DRAWING FIGURE 1 VIP ALL OTHERS 12 (30) 19 (48) 18 ( (55) VIP ALL 16 (41) 23 (58) 16 (41) 19.5 (50) VIP ALL 18 (46) 25 (64) 24 (61) 27.5 (70) VIP ALL 24 (61) 31 (79) 30 (76) 33.5 (85) VIP320 ISOLATION PLATFORM 6 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERT OF VISTEK, INC. AN REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF VISTEK, INC. IS PROHIITED. THE ASSEML / PART(S) ILLUSTRATED IN THIS DRAWING IS AN INVENTION OR PART OF AN INVENTION THAT IS PROTECTED U. S. PATENTS AND FOREIGN PATENTS PENDING AND/OR APPLIED FOR, AND APPLICALE TRADE SECRETS LAW. P/N: 5 4 NET ASS APPLICATION USED ON UNLESS OTHERWISE SPECIFIED CAD GENERATED DRAWING, DIMENSIONS ARE IN INCHES DO NOT MANUALL UPDATE TOLERANCES ARE: APPROVALS DATE FRACTIONS DECIMALS ANGLES 1/ /2 DRAWN R. HAM 3/1/ CHECKED MATERIAL RESP ENG FINISH MFG ENG QUAL ENG DO NOT SCALE DRAWING 3 2 SIZE VIRATION & MOTION CONTROL PHOENI, ARIZONA Phone (602) / Fax (602) DWG. NO. SCALE 1:8 MASS: VISTEK Inc. VIP320 PLATFORM DIMENSIONS CAD FILE: LS REV. SHEET 1 OF 1 A
XSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value
XSlide Positioning System Long life, precise movement, greater value Manual and Motorized Compact Positioning Stage XSLIDE Ideal for limited space applications Velmex Versatility Velmex positioning products
The high Force at the End of Stroke, just where it is important
SCHMIDT Toggle Presses The high Force at the End of Stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are
Rexroth Linear Bushings and Shafts, GreenLight Selection
4 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Rexroth Linear Bushings and Shafts, GreenLight Selection Bosch Rexroth is the global leader in metric bushings. Whether you need standard bushings
Acoustic, Vibration, and EMI Isolation Specialists. AVI-600 Series
Acoustic, Vibration, and EMI Isolation Specialists AVI-600 Series Overview The AVI-600 platforms provide industry-leading active vibration isolation performance (starting at 0.5 Hz) for the precision research
Sit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
G12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
LOCAL EXTRACTORS Pure advantages. The ideal extractor for industrial environments.
N new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability. H - Hood designed for maximum capture PR's design is based on Movex's basic principles:
NEW BenchPro Series Multi-Purpose Digital Bench Scale
The BenchPro Series family of digital bench scales is ideal for many diverse industries and markets around the world. As a general purpose scale, the BenchPro offers many benefits, including the ability
CLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Tire Retread Component Tech-Sheets
Tire Retread Component Tech-Sheets McGINTY CONVEYORS, INC. 5002 W. WASHINGTON ST. INDIANAPOLIS, IN 46241 PHONE: (317) 244-3353 FAX: (317) 240-4323 EMAIL: info@mcgintyconveyors.com WEB: www.mcgintyconveyors.com
Product data sheet : Electric height adjustable desk frame
Product data sheet : Electric height adjustable desk frame 501-27 327990.2 Table of contents Packing details.... 3 Main measures and specifications.... 4 Tabletop drillings.... 5 Assembly and use... 6
Magnetic probe holders are fully adjustable for more DUT heights and probe styles
Data Sheet The W4.0 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 4.0 wafers or 4.0 x 6.5 printed circuit board assemblies. This mini probe
Digital Bench Scale. Revision 8.93 August 12, 1993
Digital Bench Scale Revision 8.93 August 12, 1993 Salter Brecknell Weighing Products 1000 Armstrong Drive Fairmont, MN 56031 Tel (800) 637-0529 Tel (507) 238-8702 Fax (507) 238-8271 E-mail: sales@salterbrecknell.com
AVI-400 Series. Overview. Acoustic, Vibration, and EMI Isolation Specialists.
Acoustic, Vibration, and EMI Isolation Specialists AVI-400 Series Overview The AVI-400 platforms provide industry-leading active vibration isolation performance (starting at 0.5 Hz) for electron microscopes
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
Frontslide 100/A. Description. Applications. Features of the HAWA-Frontslide 100/A. Patents
Frontslide 100/A Patents Sliding shutters for a functional façade finish. Hardware system for wood, metal or aluminium sliding shutters with a panel weight up to 100 kg (220 lbs.) Guides page 112 Locking
ACTIVE VIBRATION ISOLATION ELEMENTS
ACTIVE VIBRATION ISOLATION ELEMENTS INTRODUCTION ACTIVE VIBRATION ISOLATION ELEMENTS: The Vario systems are element based modular vibration isolation systems, consisting of at least two isolation elements
Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A
Application Specification IMPACT* Standard 114-13258 Connector Systems 05 NOV 10 Rev A NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
Ideal for a wide range of applications such as wafer test or PCB test for mm-wave, Microwave, RF or Automotive applications
Data Sheet The W2.5 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 2.5 wafers or 2.5 x 6.5 printed circuit board assemblies. This mini probe
LOCAL EXTRACTORS. The ideal extractor for industrial environments. Pure advantage
The ideal extractor for industrial environments. New technology in combination with new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability.
Info Sheet DesignStand S3
The combination of the elegant design stand with reliable event technology enables sophisticated and first-class solutions. The equipment fully performs within the public s line of vision yet is discretely
Lesson 24: Surface Area
Student Outcomes Students determine the surface area of three-dimensional figures, those that are composite figures and those that have missing sections. Lesson Notes This lesson is a continuation of Lesson
Laser Safety (Interlock) Shutter / X-RAY Shutter
Laser Safety (Interlock) Shutter / X-RAY Shutter EOP-SH-20 1 FEATURES AND ADVANTAGES Integrated return spring Model SH-10: 0.5" (13mm) aperture Model SH-20: 1" (25mm) aperture, larger optional Small size
UNISLIDE. UniSlide Positioning System. Manual. Wide Array Of Linear Motion Devices. Rugged, simple, effective, world-wide reknown, low cost
UniSlide Positioning System Rugged, simple, effective, world-wide reknown, low cost Manual Wide Array Of Linear Motion Devices UNISLIDE The broadest line of manual positioning assemblies Velmex Versatility
SFC KOENIG Product Catalog
SFC KOENIG Product Catalog 8 2016 SFC KOENIG I www.sfckoenig.com The World s Leading Sealing & Flow Control Technology With over 3 billion parts installed and failure rates less than 1 part per million,
Flow Measurement SITRANS F M. Transmitter MAG 6000 I/6000 I Ex de. 3/46 Siemens FI
Overview The MAG 6000 I/6000 I Ex de is a microprocessorbased transmitter with a buildin alphanumeric display in several languages. The transmitters evaluate the signals from the associated electromagnetic
Series 062 Bus Bar Connectors
Series 062 Bus Bar Connectors Application Specification 114-2130 22 DEC 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Adjustable, Dirt Tolerant Venturi Vacuum Pumps
Adjustable, Dirt Tolerant Venturi Vacuum Pumps VDF Series VDF-37-ST8B picks and places refrac bricks used to line refractory ovens. Standard Pump: The VDF Series is a unique Vaccon innovation that places
Enidine Wire Rope Isolators. Wire Rope Isolators. Solutions in Energy Absorption and Vibration Isolation.
Enidine ire Rope Isolators ire Rope Isolators Solutions in Energy Absorption and Vibration Isolation. Introducing Typical ire ire Rope Rope Isolator Isolators Applications Electronic Enclosures Medi-vac
Applications : LA-51-1 LA-52-1 LA-51-2 LA Features : LA-51-3 LA-52-3 LCD SUPPORTER KEYBOARD ARM
Applications : It goes well with partition boards and tracks in an office, or Medicine table at a dentist, or Medical equipment at a clinic or mobile cart, or Industrial machinery or monitor system at
Mounting Options. Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
763.422.2600 Spec-00560 F763.422.22 Mounting Options SYSPEND 28-MAX Suspension System Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 TM INDUSTRY STANDARDS Maintains
NEW BenchPro Series Multi-Purpose Digital Bench Scale
The BenchPro Series family of digital bench scales is ideal for many diverse industries and markets around the world. As a general purpose scale, the BenchPro offers many benefits, including the ability
SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
1735 N. 28th Avenue Suite 1 Phoenix, AZ Local: Outside AZ: Fax:
1735 N. 28th Avenue Suite 1 Phoenix, AZ 85009 Local: 602-269-1775 Outside AZ: 877-845-7940 Fax: 602-269-0542 CONTENTS SOLID CARBIDE THREAD MILLS Thread Mill Identification System Carbide Grades Internal
Digital Bench Scale. Revision 1.2 August 24, Contents subject to change without notice.
Digital Bench Scale Revision 1. August 4, 000 Contents subject to change without notice. Salter Brecknell Weighing Products 1000 Armstrong Drive Fairmont, MN 56031 Tel (800) 637-059 Tel (507) 38-870 Fax
INSTRUCTION MANUAL RA 19-5B RACK ADAPTER HOT SWAP RACK ADAPTER FOR HSF SERIES POWER SUPPLIES
INSTRUCTION MANUAL RA 19-5B RACK ADAPTER HOT SWAP RACK ADAPTER FOR HSF SERIES POWER SUPPLIES KEPCO INC. An ISO 9001 Company. MODEL RA 19-5B RACK ADAPTER ORDER NO. REV. NO. IMPORTANT NOTES: 1) This manual
Acoustic, Vibration, and EMI Isolation Specialists. AVI-200 Series
Acoustic, Vibration, and EMI Isolation Specialists AVI-200 Series Overview The AVI-200 platforms provide industry-leading active vibration isolation performance (starting at 0.5 Hz) for compact microscopes
TIMSS 2011 Fourth Grade Mathematics Item Descriptions developed during the TIMSS 2011 Benchmarking
TIMSS 2011 Fourth Grade Mathematics Item Descriptions developed during the TIMSS 2011 Benchmarking Items at Low International Benchmark (400) M01_05 M05_01 M07_04 M08_01 M09_01 M13_01 Solves a word problem
BGA Socketing Systems
DATA BOOK BGA-TECH04 (REV. 3/04) BGA Socketing Systems Search for a footprint or build a part number online at www.bgasockets.com Solutions for Virtually Any BGA Application BGA Socket Adapter System Designed
Online data sheet. V3T12S-MR32A8 TriSpector1000 3D VISION
Online data sheet V3T12S-MR32A8 TriSpector1000 A B C D E F I J K L M N O P Q R S T Detailed technical data Features Task Technology Toolkit Working distance Example field of view Light source Ordering
ROUNDTEST RA Roundness/Cylindricity Measurment
Form Measurement Roundness/Cylindricity Measurment ROUNDTEST RA-1600 Catalog No.E15000 A new PC-compliant roundness and cylindrical-form measuring instrument with extensive analysis features to enable
IRONRIDGE PRODUCT CATALOG
IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing
AMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
CATALOG NUMBER PROJECT W2 TRACK AND COMPONENTS
CATALOG NUMBER TYPE PROJECT W2 TRACK AND COMPONENTS Description W2 120V or 277V Track system provides two separate 20 AMP circuits and two neutrals. Each circuit can be independently switched. Fully polarized
1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 4KE / 4KEH Series: Semi-Automatic, Motorized Y/Z Axes, Wedge-Wedge, Ball- Wedge Triple-Convertible Wire Bonders Last
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
STEREO MICROSCOPE BOOM STANDS
For your general digital camera needs, request our SPOT Insight Brochure. For your low light digital camera needs, request our SPOT RT Brochure. For your substage illuminator needs, request our Transilluminating
NEW - Quick Mode - The revolutionary way to simplify measurement!
+ D i g i m a r NEW - Quick Mode - The revolutionary way to simplify measurement! The new Height Measuring Instrument Digimar 817 CLM Quick Height 2 Digimar 817 CLM Quick Height The new Height Measuring
loud V3 Load*Cell Reader Cell*Mate System USER MANUAL V3 Load Cell Reader A
loud V3 Load*Cell Reader Cell*Mate System USER MANUAL V3 Load Cell Reader A-17-009-0003 This V3 Load Cell Reader is intended for professional use only Read this entire document before installing operating
200 mm Semi-automated Probe System with BlueRay Technology
PA200BlueRay 200 mm Semi-automated Probe System with BlueRay Technology DATA SHEET The sets a new standard for high-speed accuracy. Its precision ensures smooth probe landing with safe, repeatable electrical
LEEDS. Product Catalog. PRECISION INSTRUMENTS. Microscope accessories, bases, stands, lighting, mounts & tables.
PRECISION INSTRUMENTS Product Catalog Microscope accessories, bases, stands, lighting, mounts & tables December 2018 www.leedsmicro.com T a b l e o f C o n t e n t s Part Number Description Page # STANDS
ABB MEASUREMENT & ANALYTICS DATA SHEET. IT1 Universal weighing terminal
ABB MEASUREMENT & ANALYTICS DATA SHEET IT1 Universal weighing terminal 2 IT1 UNIVERSAL WEIGHING TERMINAL DS/IT1-EN REV. A Measurement made easy Suitable for difficult environmental conditions and locations
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-392 DATA SHEET 38999 SERIES III TYPE, ARR. 25-26 WITH SIZE 8 ELECTRO-OPTICAL CONTACT TRANSMITTER AND/OR RECEIVERS PC TAIL WITH PCB STANDOFFS OPEN FACE ENVIRONMENTALLY SEALED REV DESCRIPTION DATE APPROVED
SIWAREX JB Aluminum Housing. Instruction Manual Edition 03/2006
s SIWAREX JB Aluminum Housing Instruction Manual Edition 03/2006 Table of Contents Table of Contents... 2 Warning and Safety Terms... 3 General... 4 1 Technical Description... 5 1.1 Area of Application...
Specifications. S&C Regulator Bypass Switches Type XL (Sequenced) and Type NL (Nonsequenced) Outdoor Distribution (14.
Type XL (Sequenced) and Type NL (Nonsequenced) Outdoor Distribution (14.4 kv and 25 kv) Specifications Conditions of Sale STANDARD: The seller s standard conditions of sale set forth in Price Sheet 150
8-Position Vertical Modular Jack With ACTION PIN* Compliant Contacts
8-Position Vertical Modular Jack With ACTION PIN* Compliant Contacts Application Specification 11 MAY 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
General Specifications
General Specifications Model MLX Loop Powered Process Indicator GS 60A02S01-01E-A The Model MLX Loop-Powered Process Indicator receives DC current signals from electronic transmitters and indicates process
Installation / Operator / Service Manual. Bench Scales Revision 6 07/ by Fairbanks Scales Inc. All rights reserved
Installation / Operator / Service Manual Bench Scales 2005-2010 by Fairbanks Scales Inc. All rights reserved 50778 Revision 6 07/10 Amendment Record 50778 Manufactured by Fairbanks Scales Inc. 821 Locust
Oct 16 Rev D
Next Generation ARINC 600 Connector Application Specification 114-13272 05 Oct 16 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
Catalogue. electric-, cordless- and. pneumatic power tools. Products for sheet metal processing Edition 2008 / 2009
Catalogue electric-, cordless- and pneumatic power tools Products for sheet metal processing Edition 2008 / 2009 Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TRUMPF profile
SECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].
![SECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].](/thumbs/85/91906702.jpg "SECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].")
(Specifier Note: The purpose of this guide specification is to assist the Specifier in correctly specifying AeroLift motorized projector lifts and their installation. The Specifier needs to edit these
BOARD LEVEL POWER SEMICONDUCTOR HEAT SINKS
634 SERIES Slim Profile Unidirectional Fin Vertical Mount Heat Sink TO-220 and TO-218 Standard Height Above Footprint P/N PC Board Dimensions Weight Plain Pin Without Pin in. (mm) in. (mm) lbs. (grams)
TEPI11 P/I signal converter
Contents Data Sheet 10/18-0.15-EN Rev. A TEPI11 P/I signal converter Air pressure in current DMS sensor for gauge pressure Compact design Small dimensions, low weight Can be installed in any orientation
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-29504/13A 12 November 2002 SUPERSEDING MIL-T-29504/13 21 May 1992 PERFORMANCE SPECIFICATION SHEET TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS,
SECTION TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS. A. Monolithic Tempered Glass Dry Glazed Railing Assemblies.
1 SECTION 05 7310 TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Monolithic Tempered Glass Dry Glazed Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal
Thermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Lesson 23: Surface Area
Lesson 23 Lesson 23: Classwork Opening Exercise Calculate the surface area of the square pyramid. Example 1 a. Calculate the surface area of the rectangular prism. Lesson 23: S.142 Lesson 23 b. Imagine
ED-1100 PORTABLE VARIABLE EDDY CURRENT INSTRUMENT
ED-1100 PORTABLE VARIABLE EDDY CURRENT INSTRUMENT EQUIPMENT SPECIFICATION ES-110-1 - 1.0 Description 1.1 The Model ED-1100 is a microprocessor based variable frequency eddy current instrument, with a liquid
GHI Systems Rotary Vibration Machine Manual
GHI Systems Rotary Vibration Machine Manual Version 1.0 Release Date January 2002 Copyright 2002 By GHI Systems, Incorporated 916 N. Western Ave. Suite 201 San Pedro, California No part of this publication
MPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage
MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to mm Precision ground ball-screw or lead-screw drive DC servo or stepper motor Crossed-roller bearings High resolution
40' Telescoping Fixed Mount Light Mast w/ (2) HD Security Cameras ' - 4-Stage Rotating
40' Telescoping Fixed Mount Light Mast w/ (2) HD Security Cameras - 13-40' - 4-Stage - 360 Rotating Part #: LM-40-4S-FM-EW-NYC-2XPTZ-20X Page: 1 Page: 2 Made in the USA The LM-40-4S-FM-EW-NYC-2XPTZ-20X
Type NT and Type ZWM Terminal Blocks
Type NT and Type ZWM Terminal Blocks Unit-pole construction Sliding link to permit testing without disturbing wiring High barriers that prevent shorting between poles Class 1E qualified per IEEE RECOGNIZED
Section 20 Distribution (Underground)
PREVIOUS SEARCH NEXT Section Distribution (Underground) Table of Contents Page Underground Connectors...-2 Padmount Transformer Connectors...-3 Pedestal Connectors...-4 Pedestal Block Connector...-6 Street
Technical Data Sheet Excel 741
Technical Data Sheet Excel 741 Excel 700 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43, 48, 50, or 54 Steel faces laminated to gypsum board 102
3000 SERIES LOW PROFILE FLOOR SCALE.
3000 SERIES LOW PROFILE FLOOR SCALE www.nascoop.com 3000 SERIES LOW PROFILE FLOOR SCALE An Economical Choice Offering Exceptional Performance The Summit 3000 Series provides exceptional performance in
EC centrifugal module - RadiPac
KG8-AU6-B ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-746 Mulfingen Phone +49 798 8- Fax +49 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Gold Wire Contacts. No No No No No No enlarged
enlarged Lens Paper This Premium Grade Optical Lens Tissue is extremely soft and safe for any optical lens surface - glass or plastic. 4 x 6 Book of 50 sheets. No. 29015-50 Gold Wire Contacts Matching
Frontslide 60/A-Telescopic
Frontslide 60/A-Telescopic Patents A lot of motion with a single slide. Hardware for simultaneously sliding up to 4 wood, metal or aluminium shutters of up to 60 kg (132 lbs.). Guides pages Seite 32 Locking
Go from sit to stand, with one touch. Dual Monitor Sit-to-stand Workstation. StarTech ID: BNDSTSDUAL
Dual Monitor Sit-to-stand Workstation StarTech ID: BNDSTSDUAL This dual-monitor sit-to-stand workstation lets you enhance your productivity and comfort, by giving you a dualdisplay work space that s easy
Dual Monitor Sit-to-stand Workstation
Dual Monitor Sit-to-stand Workstation Product ID: BNDSTSDUAL This dual-monitor sit-to-stand workstation lets you enhance your productivity and comfort, by giving you a dual-display work space that s easy
Parts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
SITRANS F C. Transmitter MASS 6000 Ex d compact/remote 3/195
Overview MASS 6000 is based on the latest developments within digital signal processing technology engineered for high performance, fast flow step response, fast batching applications, high immunity against
TABLE 1 - SPECIFICATIONS
TABLE - SPECIFICATIONS L L L INTEGRAL (0) 08 0. 8.0 0 FX-080-00 8. 0. FX-080-00.. 0 FX-00-00 7. 9.0 FX-00-00. 7.9 FX-0-00.. FX-0-00 -WAY 00.9. FX-000-00 (700) 08 0.0 0.0 0 0 FX-080-00.9 7. 0 FX-080-00
Flow Measurement SITRANS F C
Overview MASS 6 is based on digital signal processing technology engineered for high performance, fast flow step response, fast batching applications, high immunity against process noise, easy to install,
SMART Position Sensor, 100 and 180 Arc Configurations
SMART Position Sensor, 1 and 18 Arc Configurations DESCRIPTION The SMART Position Sensor is one of the most durable, adaptable, and lightweight position sensors available in the industry, enabling highly
APPENDIX B DESIGN AND CALCULATIONS OF THE FLYGUY S FRAMEWORK
APPENDIX B DESIGN AND CALCULATIONS OF THE FLYGUY S FRAMEWORK - 195 - Appendix B Design and calculations of flyguy s framework 1. Technical requirements. Use only MayTec aluminum profiles. Fixed and rigid
Right Angle PCB Receptacle
Series 80 Series 80 Mighty Mouse ouble-start ACME Thread 80-0 Ordering Information connectors offer military grade performance in a small, lightweight package. These connectors are rated for MIL-ST-80
Desk Panel DPF. Data sheet LINAK.COM/DESKLINE
\ Desk Panel DPF Data sheet LINAK.COM/DESKLINE DPF The DPF desk panel is a perfect choice for a wide range of desks and workstations with a demand for either just up and down drive or up, down and memory.
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
Movable Top Plate (MTP)
Experts in Electrophysiology & Imaging Movable Top Plate (MTP) With manual adjusters Mounting equipment www.scientifica.uk.com 2 Movable Top Plate (MTP) This platform satisfies those wishing for manual,
OptoFence. OptoFence OF OF safety light curtains. Description
File No. LR90200 Description OptoFence OF4600-50 2.0 inch (53mm) resolution 80 foot (24 meter) range Four protected heights available: 27, 41, 55 and 69 inches (700, 1046, 1394 and 1741mm) Compact size
PMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS
PRODUCT SPECIFICATION control site PMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS Product Features For Use with VESA -Compliant Monitors Rack Mounts for All 200/300/400 Series
Revision 1, October 9, 2008 Copyright Luminos Industries Ltd. Parts: P3R, P2YP, P2RY, P2RP
Revision 1, October 9, 2008 Copyright Luminos Industries Ltd. Parts: P3R, P2YP, P2RY, P2RP Table of Contents Introduction to the Rotational Positioner... 1 Feature Summary... 2 Getting Started... 3 Reading