ODT-MAC340 SYMBOLOGIES SCAN DISTANCE DEPTH OF FIELD SCAN AREA LIGHT SOURCE EVALUATION RATE. Data Matrix ECC x 26 Module DATA MATRIX INPUTS

Size: px

Start display at page:

Download "ODT-MAC340 SYMBOLOGIES SCAN DISTANCE DEPTH OF FIELD SCAN AREA LIGHT SOURCE EVALUATION RATE. Data Matrix ECC x 26 Module DATA MATRIX INPUTS"

Lisa Bridget Griffith
5 years ago
Views:

1 High speed reading in the most compact way The ODT-MAC340 has been developed to read at very high transport speeds. The following performance data is achieved, through a Data Matrix code with a symbol size of 6 x 6 and a minimum module size of 0.35 mm: 25 evaluations per second 6 m/s transport speed of object Omnidirectional reading Progressive scanning 26 x 26 Module Processing of 256 grey values; adaptive grey value threshold ODT-MAC340 Fixed Mounted Data Matrix ECC 200 and Pharmacode Reader Extremely high transport speeds 50 million instructions/second Reflection suppression ODT-MAC340 SYMBOLOGIES SCAN DISTANCE DEPTH OF FIELD SCAN AREA LIGHT SOURCE EVALUATION RATE TRANSPORT SPEED MAX. DATA MATRIX SYMBOL SIZES MODULE SIZE DATA FORMAT Pharmacode, 90mm ±7mm 20 x 5mm Integrated LED-Flash (red) 25Hz 6m/s Square: 48 x 48 module max. Rectangular: 6 x 48 module max. 0.7mm minimum ASCII, C40, Text, X2, Edifact, Base 256, all ISO 646 ODT-MAC340 DSP for higher performance The digital signal processor works in real time. This means a processing rate of approximately 50 million instructions per second. Decoding takes place in the reader. Extensive external processor performances are not necessary. INPUTS OUTPUTS ORIENTATION MAXIMUM DATA CAPACITY Omnidirectional 348 numerical, 259 ASCII, 72 Bytes Trigger 24VDC (up to 4 inputs optional) 2 x opto-coupled (up to 4 outputs optional) Omnidirectional reading INTERFACES x RS-232 (2 x RS-232 optional) ODT-MAC340 9/22/04 The ODT-MAC340 reads Data Matrix code omnidirectionally. It is no longer necessary to read codes on the lids of cylindrical (bottles, vials, cans, etc.) objects. The code can be placed anywhere on the cylindrical object and will always be read as long as the image area is sighted. The Finder Pattern, a special feature in the Data Matrix code, allows the ODT-MAC340 reader to determine the position and arrangement of the code. TRANSMISSION LED DISPLAY CONNECTORS POWER SUPPLY HOUSING PROTECTION CLASS k baud Trigger, Good, Fail VGA, 5-pin D-sub, 0.5m cable 24VDC, 5W 0ºC to +45ºC Anodized aluminum IP65 Glossy surfaces? -the solution is built in! 65 x 84 x 32mm High-gloss surfaces reflect the emitted light back to the receiver. With the ODT-MAC340, it is no longer necessary 730g

2 ODT-MAC340 to to angle or tilt the object to get a good read. The ODT-MAC340 has an optical anti-mirror system built-in reflection supression. Ambient light? - no problem! The high-energy flash of the ODT-MAC340 is precisely synchronized with the camera functions and the trigger signal. Only 27 microseconds are necessary to freeze the picture. This short flash period also reduces light pollution and prevents negative effects to the human eye. The solid-state light source is not subject to deterioration. Heat generation and power consumption are reduced to a minimum. Flexible interface speedy data transfer Fast production requires even faster data transmission. The ODT-MAC340 reader not only enables the physical interface RS-232 and allows the adaptation of different protocols, it also achieves transfer rates of 5 k baud under real conditions. Adjustment and so on... A VGA-monitor output is provided to connect a standard PC-monitor. The image of the ODT-MAC340 can be displayed continuously and in real time. In addition, to the optical adjustment of th OPT-MAC340, the quality of the picture taken by the device can be precisely evaluated. Optical module - 90 turnable The mechanical adjustment of the ODT-MAC340 is very simple. The optical module, consisting of light source, optics and CCD chip can be turned 90 simply by loosening two screws. By rotating the module to the side window, the mounting height can be reduced and the cables installed parallel to the scanning surface. OMNICONTROL software for the user OMNICONTROL for Windows (Windows 95 or higher) serves to alter the configuration. The program is designed to be user friendly and also offers various functions for error diagnosis. Once a set of parameters is chosen, this specific configuration may be stored in the PC or downloaded to the ODT-MAC340. Information remains in the nonvolatile memory until a different configuration is transmitted. Two operating modes as a choice The ODT-MAC340 can transmit the acquired data via the serial interface. As an alternative, the Matchcode Mode can be chosen. This mode offers the possibility of storing reference data that is compared with the actual read data. Depending on the result, respective Good/Fail outputs are activated. ODT-MAC340 9/22/04 2

3 High speed reading in the most compact way The ODT-MAC344 has been developed to read at very high transport speeds. The following performance data is achieved, through a Data Matrix code with a symbol size of 6 x 6 and a minimum modul size of 0.35 mm: 25 evaluations per second 6 m/s transport speed of object Omnidirectional reading Progressive scanning Processing of 256 grey values; adaptive grey value threshold DSP for higher performance 26 x 26 Module The digital signal processor works in real time. This means a processing rate of approximately 50 million instructions per second. Decoding takes place in the reader. Extensive external processor performances are not necessary. ODT-MAC344 Fixed Mounted Data Matrix ECC 200 and Pharmacode Reader Extremely high transport speeds Compact sensor unit Separate evaluation box ODT-MAC344 SYMBOLOGIES SCAN DISTANCE DEPTH OF FIELD SCAN AREA LIGHT SOURCE EVALUATION RATE TRANSPORT SPEED MAX. DATA MATRIX SYMBOL SIZES INPUTS OUTPUTS INTERFACES MODULE SIZE DATA FORMAT ORIENTATION MAXIMUM DATA CAPACITY Pharmacode, 32mm ±3mm 29 x 24mm Integrated LED-Flash (standard white, optional red) 25Hz 6m/s Square: 48 x 48 module max. Rectangular: 6 x 48 module max. 0.25mm minimum ASCII, C40, Text, X2, Edifact, Base 256, all ISO 646 Omnidirectional 348 numerical, 259 ASCII, 72 Bytes Trigger 24VDC (up to 4 inputs optional) 2 x opto-coupled (up to 4 outputs optional) x RS-232 ODT-MAC344 ODT-MAC344 9/22/04 Omnidirectional reading The ODT-MAC344 reads Data Matrix code omnidirectionally. It is no longer necessary to read code on the lids of cylindrical (bottles, vials, cans etc.) objects. The code can be placed anywhere on the cylindrical object and will always be read as long as the image area is sighted. The Finder Pattern, a special feature in the Data Matrix code, allows the ODT-MAC344 reader to determine the position and arrangement of the code. TRANSMISSION CONNECTORS POWER SUPPLY PROTECTION CLASS SENSOR LED DISPLAY k baud 0ºC to +45ºC VGA, 5-pin D-sub plug for power supply and communication, 44-pin D-sub socket for sensor 24VDC, 5W IP54 Good, Fail 65 x 40 x 66mm (without cable) Glossy surfaces? -the solution is built in! High gloss surfaces reflect the emitted light back to the receiver. With the ODT-MAC344, it is no longer necessary EVALUATION BOX HOUSING 250g Anodized aluminum 37 x 84 x 58mm 500g

4 ODT-MAC344 to angle or tilt the object to get a good read. The ODT- MAC344 has a built-in optical anti-mirror system built-in reflection suppression. Ambient light? - no problem! The high-energy flash of the ODT-MAC344 is precisely synchronised with the camera functions and the trigger signal. Only 27 microseconds are necessary to freeze the picture. This short flash period also reduces light pollution and, therefore, prevents negative effects to the human eye. The solid-state light source is not subject to deterioration. Heat generation and power consumption are reduced to a minimum. Flexible interface speedy data transfer Fast production requires even faster data transmission. The ODT-MAC344 reader not only enables the physical interface RS-232 and allows the adaptation of different protocols, it also achieves transfer rates of 5 k baud under real conditions. Adjustment and so on... A VGA-monitor output is provided to connect a standard PC-monitor. The image of the ODT-MAC344 can be displayed continuously and in real time. In addition to the optical adjustment aid of the OPT-MAC344, the quality of the picture taken by the device can be precisely evaluated. Optical module - 90 turnable The mechanincal adjustment of the ODT-MAC344 is very simple. The optical module, consisting of light source, optics and CCD chip, can be turned 90 by simply loosening two screws. By rotating the module to the side window, the mounting height can be reduced and the cables installed parallel to the scanning surface. OMNICONTROL software for the user OMNICONTROL for Windows (Windows 95 or higher) serves to alter the configuration. The program is designed to be user friendly and also offers various functions for error diagnosis. Once a set of parameters is chosen, this specific configuration may be stored in the PC or downloaded to the ODT-MAC344. Information remains in the nonvolatile memory until a different configuration is transmitted. Two operating modes as a choice The ODT-MAC344 can transmit the acquired data via the serial interface. As an alternative, the Matchcode Mode can be chosen. This mode offers the possibility of storing reference data that is compared with the actual read data. Depending on the result, respective Good/Fail outputs are activated. ODT-MAC344 9/22/04 2

Small, light and ergonomic ODT-MAH00 inaugurates a new guidance concept for the operator. The handheld device is light and comfortable in the hand, similar to the previous, very popular pen scanners.

5 Small, light and ergonomic ODT-MAH00 inaugurates a new guidance concept for the operator. The handheld device is light and comfortable in the hand, similar to the previous, very popular pen scanners. It is especially easy to read 2-D and -D codes, especially on documents and labels. A very accurate laser targeting system enables the exact positioning over the code. The high density Data Matrix Codes are read accurately, quickly and of course omnidirectionally. CMOS Technology a high resolution reader The high resolution CMOS technology allows not only the identification of very small Data Matrix codes, it also guarantees the evaluation of bigger barcodes. Different optical configurations are not necessary. Interface - on request The ODT-MAH00 comes equiped with a keyboard wedge. An additional power supply is not necessary. An RS-232 connection with an external power supply is available as an option. The latest improvement is a model with PC-Card Interface that allows communication to a Palmtop processor. ODT-MAH00 Handheld Reader for and Barcode Accurate, high resolution Reads -D and 2-D codes Lightweight and comfortable ODT-MAH00 2-D CODES READING DISTANCE -D CODES READING DISTANCE READING ANGLE AMBIENT LIGHT RESISTANCE LENGTH DIAMETER INTERFACE 8-57mm (0.2mm min. module size) Code 39, Code 28, EAN, UPC 8-52mm (0.mm min. module size) 45º omnidirectional 00,000 lux 80mm 30mm 5g (without cable) 0ºC to +40ºC Keyboard (standard) RS-232 (option) PC-Card (option) ODT-MAH00 ODT-MAH00 9/22/04

ODT-MAH200 9/22/04 ODT-MAH200 is a revolutionary, new bar code reader. Developed to be the first universal reader, no other single device performs as many functions.

This combination has created a reading system that supports: High density matrix codes and larger low density linear codes Superior working range High-speed omnidirectional decoding Cordless and

6 ODT-MAH200 9/22/04 ODT-MAH200 is a revolutionary, new bar code reader. Developed to be the first universal reader, no other single device performs as many functions. With a cost far less than comparable systems, the ODT-MAH200 incorporates a unique dual path optical system, a.3 million pixel CMOS sensor, and a 400 MHz processor. This combination has created a reading system that supports: High density matrix codes and larger low density linear codes Superior working range High-speed omnidirectional decoding Cordless and cabled interfaces Unsurpassed data rates The ODT-MAH200 sets a new benchmark for size and weight. It is smaller and lighter than comparable systems yet can withstand multiple drops onto a concrete floor. It is the only product available in handheld, gun handle, and presentation-stand form factors with cabled, batch and cordless versions. The cordless version utilizes the latest Bluetooth TM class interface with a 300 foot operating range. Rugged and lightweight, the cordless version will operate for more than a complete shift at the highest use rate. The ODT-MAH200 performs more than 4000 reads and transmits from a single battery charge. Rugged and light The ODT-MAH200 is rugged and versatile enough for the most demanding warehouse and production applications, yet rapid and economical enough for point-of-sale applications. Small and light enough to be used in parcel tracking, the ODT-MAH200 features a 300 milliamp lithium-ion battery and 8 MB of nonvolatile memory, outperforming all other store and forward devices. ODT-MAH200 Cabled, Batch, and Cordless Universal Readers Impressive operating ranges Small, yet extremely durable Time stamp for logging data ODT-MAH200 SYMBOLOGIES SENSOR OPTICAL RESOLUTION TARGET BEAM INTERFACE -D Codes or 2-D Codes, small or big ODT-MAH200 automatically distinguishes between all major 2-D matrix and linear barcode symbologies and features a time stamp feature for logging data. Whether you need a small, palm-held device or a traditional gun, ODT-MAH200 is specifically developed to enable users to easily choose the device that best meets their needs. The ODT-MAH200 is available in three basic configurations: ODT-MAH200 Cabled USB, or RS-232 MaxiCode, PDF47, Data Matrix, QR Code, MicroPDF 47, GoCode, UCC Composite, Aztec Code, Code 39, Code 28, UPC, EAN, JAN, Int 2 of 5, Codabar, Code 93, UCC RSS, POSTNET, PLANET, Japanese Post, Australia Post, Royal Mail, RM4SCC, KIX Code 0ºC to +40ºC CMOS (024 x 280) 024 x 640 Laser diode 630nm USB (standard) and RS-232, Bluetooth Class Interface 33 X 09 X 46mm 5g (without cable) ODT-MAH200 Batch Store and forward device with memory and long-life battery ODT-MAH200 Cordless Long-life battery and Bluetooth interface ODT-MAH200

7 ODT-MAH200 Cabled ODT-MAH200 Cordless ODT-MAH200 The ODT-MAH200 cabled version is available with USB (standard) or RS- 232 interfaces. All cables use rugged, automatic locking adapters that allow users to change cables, but prevent inadvertant disconnections. ODT-MAH200 Batch (Store-Forward) The ODT-MAH200 Batch version features a 300 milliamp lithium-ion battery with a 6200 scan lifespan plus 8 hours of standby time. The unit features 8 MB of nonvolatile memory and automatically recharges when connected via the USB interface. Imager 7.5 mil Data Matrix 5.8 mil Data Matrix Near Field Optimal Focal Point mil Data Matrix The ODT-MAH200 cordless version features a class Bluetooth interface with a 300 foot operating range. The ODT-MAH200 communicates seamlessly with desktop PCs, laptop PCs, PDAs, printers, cell phones, point of sale devices, LAN and WLAN routers. ODT-MAH 200 offers 6000 reads and transmits over 8 hours of standby time. 20 mil PDF 47 Far Field Optimal Focal Point in./ 0.2cm 2.0in./ 5.cm 0.0in./ 0.0cm 4.2 mil Code in./ 5.cm 5.8 mil Code 39 Maxicode 4.0in./ 0.2cm 7.5 mil Code mil UPC 4.2 mil Code mil Code in./0.0cm 4.0in./0.2cm 8.0in./20.3cm 2.0in./30.5cm 6.0in./40.6cm 20.0in./50.8cm Near Field Decode Zone Neutral Decode Zone Far Field Decode Zone ODT-MAH200 9/22/04 2

CODE READER MAH 200. Quickstart Guide

CODE READER MAH 200. Quickstart Guide CODE READER MAH 200 Quickstart Guide Designation of this documentation: Technical manual for the Code Reader MAH 200 Version of the described product: 1.0 Editorial version of this documentation: 02/05