1 Overview Thank you for choosing the 86820, an excellent industrial computer board. Based on the innovative Intel Core i7/i5/i3/celeron Processor for

Transcription

1 1 Overview Thank you for choosing the 86820, an excellent industrial computer board. Based on the innovative Intel Core i7/i5/i3/celeron Processor for optimal system efficiency, the supports 2 SO-DIMM slots to provide up to 16GB DDR3L 1333/1600 MHz memory. Designed to withstand harsh industrial conditions, the is engineered to provide reliable performance for a wide variety of industrial applications

2 Overview Motherboard Specifications Processor 5th Gen Intel Broadwell-ULT Mobile i7/i5/i3/celeron Processor Memory 2 x SO-DIMM slots, dual channel DDR3L 1333/1600 MHz Up to 16GB Networking 1 x Intel I218LM GbE LAN PHY 1 x Intel I210-AT GbE LAN Storage 2 x SATA 6Gb/s ports 1 x msata slot (shared w/ Mini PCIe) Expansion Slot 2 x Full-size Mini PCIe slots (MINI_PCIE2 shared with msata) 1 x SIM card holder Internal I/O 1 x DC-in 12/19/24V power connector 1 x SATA power connector 1 x System fan connector 1 x CPU fan connector 1 x Front panel header 1 x Front audio connector 1 x Audio amplifier connector 1 x USB2.0 connector (2 ports) 1 x RS232/422/485 COM port connector (COM1) 1 x RS232 COM port connectors (by SKU) 3 x RS232 COM port connectors (by SKU) 1 x GPIO connector 1 x LPC header 1 x PS/2 keyboard/mouse connector 1 x LVDS connector 1 x Inverter connector 1 x Chassis intrusion header 1 x Clear CMOS jumper 1 x Inverter power jumper 1 x LVDS power jumper 3 x COM port power jumpers 1 x AT/ATX jumper 2

3 86820 Rear I/O 2 x DisplayPorts (1 x colay with HDMI, 1 x colay with LVDS) 1 x DVI-I port (DVI-D only) 2 x GbE RJ45 ports 4 x USB3.0 ports TPM 1 x TPM header Infineon SLB 9635 TT 1.2 chip on board Graphics Intel HD Graphics Up to 3 independent displays (DP/HDMI + DP/LVDS + DVI-I) 1 x LVDS -- Dual channel 18/24-bit -- Up to 1920 x x VGA -- Shared with DVI-D -- Up to 1920 x x DVI-I (DVI-D only) -- Shared with VGA -- Up to 1920 x x DisplayPorts -- Up to 3840 x 2160 Audio Realtek ALC887/888S HD Audio Codec Environment Operating Temperature: -10 ~ 60 o C Storage Temperature: -20 ~ 80 o C Humidity: 10 ~ 90% RH, non-condensing Form Factor Mini-ITX: 170 mm x 170 mm Certification FCC Class A, CE, C-Tick, VCCI 3

4 Overview Motherboard Layout LVDS Power Jumper Inverter Power Jumper Rear I/O Inverter Connector LVDS Connector SO-DIMM Slots (one on the backside) System Power Connector CPU Fan Connector System Fan Connector Front Panel Header USB Connector Keyboard/Mouose Connector LPC Header Clear CMOS Jumper SATA Power Connector COM Port Connectors Audio Amplifier Connector SATA Ports GPIO Connector AT/ATX Jumper Front Audio Connector COM Port Power Jumper COM Port Power Jumper COM Port Connectors Mini PCIe Slots (one on the backside) DisplayPorts DVI-I Port (DVI-D only) GbE RJ45 Ports USB3.0 Ports 4

5 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap before handling computer components. Static electricity may damage the components

6 Hardware Setup Components Reference Guide Memory Power Supply DC-In Power Connector: JPWR SATA Power Connector: JSATA_PWR Rear Panel I/O Connector Fan Power Connector: CPUFAN1, SYSFAN Serial ATA Connector: SATA1, SATA GPIO Connector: JGPIO Front Panel Header: JFP Audio Amplifier Header: JSPK Front Audio Connector: JAUDIO RS-232/422/485 Serial Port Connector: JCOM Chassis Intrusion Header: JCASE RS232 Serial Port Connector: COM2, COM3, COM USB2.0 Connector: JUSB LVDS Inverter Connector: JINVDD LVDS Connector: JLVDS Keyboard/Mouse Connector: JKBMS LPC Debug Port Connector: JLPC1 (With TPM Support) Jumper Clear CMOS Jumper: JCMOS AT/ATX Select Jumper: JAT_ATX Serial Port Power Jumper: JCOMP1, JCOMP2, JCOMP LVDS Power Jumper: JVDD Inverter Power Jumper: JVDD Slot Mini-PCIe (Peripheral Component Interconnect Express) Slot SIM Card Holder

7 86820 Memory The SO-DIMM slot is intended for memory modules. 1. Locate the SO-DIMM slot. Align the notch on the DIMM with the key on the slot and insert the DIMM into the slot. 2. Push the DIMM gently downwards until the slot levers click and lock the DIMM in place. 3. To uninstall the DIMM, flip the slot levers outwards and the DIMM will be released instantly. Important You can barely see the golden finger if the DIMM is properly inserted in the DIMM slot. 7

8 Hardware Setup Power Supply DC-In Power Connector: JPWR1 This connector is used to provide power to the motherboard. SATA Power Connector: JSATA_PWR1 This connector is used to provide power to SATA devices. Important Make sure that all the power cables are securely connected to a proper power supply to ensure stable operation of the motherboard. 8

9 86820 Rear Panel I/O DisplayPorts DVI-I Port (DVI-D only) GbE RJ45 Ports USB3.0 Ports hh DisplayPorts DisplayPort is a digital display interface standard. This connector is used to connect a monitor with DisplayPort inputs. hh DVI-I Port (DVI-D only) The DVI-D (Digital Visual Interface-Integrated) connector allows you to connect an LCD monitor. It provides a high-speed digital interconnection between the computer and its display device. To connect an LCD monitor, simply plug your monitor cable into the DVI connector, and make sure that the other end of the cable is properly connected to your monitor (refer to your monitor manual for more information.) hh GbE RJ45 Ports The standard single RJ45 LAN jack is provided for connection to the Local Area Network (LAN). You can connect a network cable to it. LED Color Status Description Active LED Speed LED Link/ Active (Left) Yellow On Linked Yellow Blinking Data activity Off Off No link Speed (Right) Orange On 1GbE Green On 100M Off Off 10M hh USB3.0 Ports The USB 3.0 port is backward-compatible with USB 2.0 devices and supports data transfer rate up to 5 Gbit/s (SuperSpeed). 9

10 Hardware Setup Connector Fan Power Connector: CPUFAN1, SYSFAN1 The fan power connector supports system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the motherboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. Serial ATA Connector: SATA1, SATA2 This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device. Important Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss may occur during transmission. 10

11 86820 GPIO Connector: JGPIO1 This connector is provided for the General-Purpose Input/Output (GPIO) peripheral module. Front Panel Header: JFP1 This front panel connector is provided for electrical connection to the front panel switches & LEDs and is compliant with Intel Front Panel I/O Connectivity Design Guide. Power Switch Power LED 10.No Pin 9.Reserved Reset Switch HDD LED 11

12 Hardware Setup Audio Amplifier Header: JSPK1 The connector is used to connect audio amplifiers to enhance audio performance. Front Audio Connector: JAUDIO1 This connector allows you to connect the front panel audio and is compliant with Intel Front Panel I/O Connectivity Design Guide. 12

13 86820 RS-232/422/485 Serial Port Connector: JCOM1 This connector is a 16550A high speed communications port that sends/receives 16 bytes FIFOs. You can attach a serial device to it through an optional serial port bracket. RS-232 PIN SIGNAL DESCRIPTION NDCD NSIN NSOUT NDTR GND NDSR NRTS NCTS VCC KEY Data Carrier Detect Signal In Signal Out Data Terminal Ready Signal Ground Data Set Ready Request To Send Clear To Send 5V or 12V selected by jumper KEY RS-422 PIN SIGNAL DESCRIPTION TXD- 422 RXD+ 422 TXD+ 422 RXD- GND NC NC NC NC KEY Transmit Data, Negative Receive Data, Positive Transmit Data, Positive Receive Data, Negative Signal Ground No Connection No Connection No Connection No Connection KEY RS-485 PIN SIGNAL DESCRIPTION TXD- NC 485 TXD+ NC GND NC NC NC NC KEY Transmit Data, Negative No Connection Transmit Data, Positive No Connection Signal Ground No Connection No Connection No Connection No Connection KEY 13

14 Hardware Setup Chassis Intrusion Header: JCASE1 This connector connects to the chassis intrusion switch cable. If the computer case is opened, the chassis intrusion mechanism will be activated. The system will record this intrusion and a warning message will flash on screen. To clear the warning, you must enter the BIOS utility and clear the record. 2.Ground 1.CINTRU RS232 Serial Port Connector: COM2, COM3, COM4 This connector is a 16550A high speed communications port that sends/receives 16 bytes FIFOs. You can attach serial devices to it through the optional serial port bracket. PIN SIGNAL DESCRIPTION NDCD NSIN NSOUT NDTR GND NDSR NRTS NCTS VCC KEY Data Carrier Detect Signal In Signal Out Data Terminal Ready Signal Ground Data Set Ready Request To Send Clear To Send 5V or 12V selected by jumper KEY USB2.0 Connector: JUSB1 This connector, compliant with Intel I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like. Important Note that the pins of VCC and GND must be connected correctly to avoid possible damage. 14

15 86820 LVDS Inverter Connector: JINVDD1 The connector is provided for LCD backlight options. LVDS Connector: JLVDS1 The LVDS (Low Voltage Differential Signal) connector provides a digital interface typically used with flat panels. After connecting an LVDS interface flat panel to the JLVDS1, be sure to check the panel datasheet and set the LVDS jumper to proper power voltage. 15

16 Hardware Setup Keyboard/Mouse Connector: JKBMS1 This connector is provided to connect a keyboard and a mouse. 6.MSC 5.5VSB 4.KBC 3.MSD 2.GND 1.KBD LPC Debug Port Connector: JLPC1 (With TPM Support) This connector works as LPC debug port and supports TPM modules through an adapter. 14.Ground 12.Ground 10.No Pin 8.5V Power 6.Serial IRQ 4.3.3V Power 2.3V Standby power 1.LPC Clock 13.LPC Frame 11.LPC address & data pin3 9.LPC address & data pin2 7.LPC address & data pin1 5.LPC address & data pin0 3.LPC Reset 16

17 86820 Jumper Important Avoid adjusting jumpers when the system is on; it will damage the motherboard. Clear CMOS Jumper: JCMOS1 There is a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, set the jumper to clear data. 1 1 Normal Clear CMOS Important You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage the motherboard. AT/ATX Select Jumper: JAT_ATX1 This jumper allows users to select between AT and ATX power. 1 1 ATX AT 17

18 Hardware Setup Serial Port Power Jumper: JCOMP1, JCOMP2, JCOMP3 The jumper specifies the operation voltage of the COM1 serial port V +5V V +5V LVDS Power Jumper: JVDD2 Use this jumper to specify the operation voltage of the LVDS display V +5V Inverter Power Jumper: JVDD1 Use this jumper to specify the operation voltage of the LVDS inverter V +12V 18

19 86820 Slot Mini-PCIe (Peripheral Component Interconnect Express) Slot The Mini-PCIe slot is provided for WiFi modules, Bluetooth modules, TV tuner cards and other Mini-PCIe cards. 1 x full-size Mini-PCIe slot (MINI_PCIE1) 1 x full-size Mini-PCIe slot (MINI_PCIE2, shared with msata) Important When adding or reing expansion cards, make sure that you unplug the power supply first. Meanwhile, read the documentation for the expansion card to configure any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration. SIM Card Holder The holder is provided for SIM card. SIM card Holder 19

20 20

21 Appendix WDT & GPIO This appendix provides the sample codes of WDT (Watch Dog Timer) and GPIO (General Purpose Input/ Output) A-1

22 WDT & GPIO WDT Sample Code SIO_INDEX_Port equ 04Eh SIO_DATA_Port equ 04Fh SIO_UnLock_Value equ 087h SIO_Lock_Value equ 0AAh WatchDog_LDN equ 007h WDT_UNIT equ 60h ;60h=second, 68h=minute, 40h=Disabled Watchdog timer WDT_Timer equ 30 ;ex. 30 seconds Sample code: ;Enable config mode dx, SIO_INDEX_Port al, SIO_UnLock_Value jmp short $+2 ;Io_delay jmp short $+2 ;Io_delay ;Change to WDT dx, SIO_INDEX_Port al, 07h dx, SIO_DATA_Port al, WatchDog_LDN ;Acive WDT dx, SIO_INDEX_Port al, 30h dx, SIO_DATA_Port in al, dx or al, 01h ;set timer dx, SIO_INDEX_Port al, 0F6h dx, SIO_DATA_Port al, WDT_Timer ;set UINT dx, SIO_INDEX_Port al, 0F5h dx, SIO_DATA_Port al, WDT_UNIT ;enable reset dx, SIO_INDEX_Port al, 0FAh dx, SIO_DATA_Port in al, dx or al, 01h ;close config mode dx, SIO_INDEX_Port al, SIO_Lock_Value 22

23 86820 GPIO Sample Code GPI 0 ~ GPI 3 GPI 0 GPI 1 GPI 2 GPI 3 IO Address SIO GPIO Register 82h 82h 82h 82h Bit Sample code #1 GPO 0 ~ GPO 3 GPO 0 GPO 1 GPO 2 GPO 3 IO Address SIO GPIO Register 81h 81h 81h 81h Bit Sample code #2 SIO_INDEX_Port equ 04Eh SIO_DATA_Port equ 04Fh SIO_UnLock_Value equ 087h SIO_Lock_Value equ 0AAh SIO_LDN_GPIO equ 06h GPI_REG equ 082h GPO_REG equ 081h GPI_ADD equ 000h GPO_ADD equ 000h GPO_0 equ b Sample Code: #1 : Get GPI 0 status ; Enable config mode dx, SIO_INDEX_Port al, SIO_UnLock_Value 23

24 WDT & GPIO jmp short $+2 ;Io_delay jmp short $+2 ;Io_delay ; Switch GPIO Configuration for SIO LDN 0x06 dx, SIO_INDEX_Port al, 07h out out dx, al dx, SIO_DATA_Port al, SIO_LDN_GPIO dx, al ; Get GPI 0 Pin Status Register out in dx, SIO_INDEX_Port al, GPI_REG dx, al dx, SIO_DATA_Port al, dx ;al bit0 = GPI 0 status ; Exit SIO out dx, SIO_INDEX_Port al, SIO_Lock_Value dx, al #2 : Set GPO 0 status to high ; Enable config mode dx, SIO_INDEX_Port al, SIO_UnLock_Value jmp short $+2 ;Io_delay jmp short $+2 ;Io_delay ; Switch GPIO Configuration for SIO LDN 0x06 dx, SIO_INDEX_Port al, 07h out out dx, al dx, SIO_DATA_Port al, SIO_LDN_GPIO dx, al ; Set GPO 0 Pin to High out in or out dx, SIO_INDEX_Port al, GPO_REG dx, al dx, SIO_DATA_Port al, dx al, GPO_0 dx, al ;al bit4 = GPO 0 status ; Exit SIO out dx, SIO_INDEX_Port al, SIO_Lock_Value dx, al 24