MEGA Line RACING ELECTRONIC GmbH Haunersdorfer Str.3 D Saal a.d. Donau Description / features

Transcription

1 Description / features The Intelligent Autarkic Supply (IAS) has been designed as an add on system in combination with the E Clutch Actuator and / or E Shift Actuator to help comply with the FIA regulation for disengaging the drive train of stranded cars by the marshals. According to the regulation, the disengagement of the drive train has to be achieved in parallel to a disconnected car main battery. The IAS contains a suitable accumulator combined with the required functionalities to allow to boot the desired E device and achieve a disconnected drivetrain even with car master switch being "off" to enable the car to be pushed or towed. The integrated accumulator (Li Ion) is permanently charged during standard car operation to ensure sufficient capacity. Also, the IAS unit allows to reduce wiring gauge for supply of the E devices by acting as a buffer. In order to allow scalability of the accumulator capacity, the unit also offers the possibility to connect an additional accumulator to react on increased supply needs. Technical specifcations Electronic data: Operating voltage Standby current Peak current Circuit breaker Mechanical data: Dimensions L x W x H Weight Connector: Deutch 37 pin, flange mounted Deutch 37 socket, loom side Temperature range: Ambient Ordering information: Article no. Order no V nom. < 0.5 ma max. 100A not integrated approx. 146 x 88 x 35 mm 375 g AS014 35PN AS614 35SN 25 C C Hazardus goods classification: The specifications contained in this document are subject to change at any time and at the discretion of and without prior warning. accepts no responsibility for any claims or damage Page 1

2 Pin assignment Pin AUX supply out AUX supply out V supply in +13.5V supply in 31 Marshalling command in (switch to GND) 33 CAN low Dia [AWG] 1 2 Type Function AUX supply command in (switch to GND) CAN high Marshalling command E Clutch out* Marshalling command E Shift paddle up out* Marshalling command E Shift paddle down out* * Highside / lowside input configurable via software digital in data digital in data The specifications contained in this document are subject to change at any time and at the discretion of and without prior warning. accepts no responsibility for any claims or damage Page 2

3 Assembly dimensions The specifications contained in this document are subject to change at any time and at the discretion of and without prior warning. accepts no responsibility for any claims or damage Page 3

4 Mechanical dimensions The specifications contained in this document are subject to change at any time and at the discretion of and without prior warning. accepts no responsibility for any claims or damage Page 4

5 Operation diagram The specifications contained in this document are subject to change at any time and at the discretion of and without prior warning. accepts no responsibility for any claims or damage Page 5