Nuclear Grade IEEE Class 1E TR-LCD2300W Industrial Wide-Screen LCD Monitor with AC/DC Power Supply

Transcription

1 Nuclear Grade IEEE Class 1E TR-LCD2300W Industrial Wide-Screen LCD Monitor with AC/DC Power Supply USER MANUAL Version /28/15 Transduction Inc Spectrum Way, Mississauga, ON Canada L4W 5A1 Tel: , Fax:

2 Revision Description Date 1.0 Initial Release 09/28/ TR-LCD2300W User Manual

3 Table of Contents Introduction... 4 Description of the TR-LCD2300W Computer Monitor... 4 Specifications... 7 Compliance Testing... 9 Emissions (EMI/RFI)... 9 Electromagnetic Compatibility (EMC)... 9 IEC Certificate IEC /EN /CISPR 11/EN Certificate FCC Class A Certificate MIL-STD-461E Certificate Environmental Seismic Seismic Certificate Important Information Safety Precautions Contents Quick Start OSD Setup Button Functions Button Name and Function OSD Setup General Description Main Menu Image Display PIP Resolutions Supported Mechanical Drawings TR-LCD2300W User Manual

4 Introduction Description of the TR-LCD2300W Computer Monitor TR-LCD2300W monitor has been designed specifically for the stringent requirements of the reliability and safety in nuclear power plants. The design of this monitor is compliant with US Atomic Energy Commission Class 1E equipment standard that defines characteristics of equipment needed for the monitoring of the nuclear reactor and emergency shutdown procedures. Transduction has a long history of manufacturing computers and monitors for the nuclear power plants in USA, China and Canada. Utmost attention is paid during design, manufacturing and test of our products in accordance with QA audits of several nuclear clients. Model TR-LCD2300W monitor uses reliable Samsung LCD panel and sophisticated video controller card based on FLI5968H-LF from ST.COM video chip. Precision welded aluminum frame has superior mechanical stability over wide range of temperature and is not affected by any vibration or shocks. For safety against intrusion no software BIOS is used, only internal settings of the video chip that are not accessible from the outside. The video card has high performance input filter to eliminate problems with low signal to noise ratio on the long cable runs. Furthermore the video controller allows user for "black level" adjustment to eliminate any noise visible on the display. Clarity of the image can be fine tuned with user accessible sharpness" feature. The isolated (4300VDC input to output) power supply included with the monitor can be used with AC source 90 to 280VAC 50/60 Hz or 125 or 250 VDC that is available from power back-up systems. 12VDC, 24VDC and 48VDC power option can also be supplied. MTBF of the power supply and monitor is 150,000 hours limited only by the useful life of the LCD backlights. This monitor is a fine example of our quality and workmanship. We can quickly redesign this monitor to fit mechanical opening of any existing monitors that are obsolete. Non-standard video formats can be matched. Warranty of the TR-LCD2300W monitor is 5 years. 4 TR-LCD2300W User Manual

5 TR-LCD2300W Front TR-LCD2300W Rear 5 TR-LCD2300W User Manual

6 TR-LCD2300W Rear (With Optional VESA Bracket) TR-LCD2300W Door Mount 6 TR-LCD2300W User Manual

7 Specifications TR-LCD2300W Monitor Notes LCD Module Size: 23 inch diagonal Display Area (mm): (H) x (L) Pixel Pitch(mm): (H) x (L) Type: AG, haze 25%, hard coating (3H) Viewing Angle: 89º(H) / (V) Brightness: 300cd/m² Contrast Ratio: 1000:1 Synchronization Horizontal: kHz Vertical: 49 75kHz Display Colors 16.7M Resolution 1920 x Input Signal DVI-I, SVGA and optional BNC type RGB input with sync on Green Maximum Pixel Clock 83MHz Power Supply AC Power Input: VAC 50/60Hz DC Power Input: VDC 50/60Hz Input Current: 2A max. Output: 12VDC ±0.1V /8.0A, 95W Power Supply Isolation Input to Output: 4300VDC Output to Chassis: 500VDC Input to Chassis: 2250VDC Power Supply Efficiency 80% minimum at full load Power Consumption 24W max. Dimensions (L) x (H) x (W) 54.10cm (L) x 32.00cm (H) x 6.68cm (W) Weight Power Supply 1.2 lbs (0.55kg) lbs (5kg) With VESA Bracket lbs (5.5kg) 7 TR-LCD2300W User Manual

8 Environmental Operating Temperature: Humidity: Storage Temperature: Humidity: Vibration and Shock: EMI/RFI: Plug and Play Capability User Adjustments: Regulatory Approvals Options 32ºF ~ 122ºF, 144 ºF for 2 hours (0ºC ~ 50ºC, 60 ºC for 2 hours) 10% ~ 90% see report -4ºF ~ 140ºF (-20ºC ~ 60ºC) 10% ~ 90% 7.5G/50G,seismic qualified see report Compliant see report This monitor can be installed and any Plug & Play compatible system. Interaction of the monitor and computer will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Main Menu, Image, Display and Picture-In-Picture (PIP) CSA, CE, UL, FCC Class A USB resistive touch screen BNC type RGB input with sync on Green NEMA4X version for harsh environments Note#1: This monitor meets all requirements of IEEE Class 1E equipment to be used in nuclear power plants. Qualification reports are available on request. Note# 2 Safety: This monitor includes video controller card that is not software programmable and not accessible via any connection to the monitor. 8 TR-LCD2300W User Manual

9 Compliance Testing Emissions (EMI/RFI) **Detailed report available on request. ** EN Harmonics and Interharmonics (16Hz 2.4 khz, Class A) 6 Hrs. EN Common Mode Disturbance (level 3) 8 Hrs. EN Conducted Immunity 5 hours (10V, MHz) EN Magnetic Field Susceptibility (Class 4 30A/m, 60Hz) 2 Hrs. EN Pulse Magnetic Field Immunity (Class 4 300A/m) EN Damped Oscillatory Magnetic Field (Class 4, 100kHz 1MHz) EN Radiated Immunity (10V/m, 26MHz 1GHz) 7 Hrs. EN Surge (2kV & 4kV, also see TR Rev. 3 test plan for details) EN Oscillating Wave (2kV & 4kV, also see TR Rev. 3 test plan for details) EN Electrical Fast Transient (2kV AC, 1kV on I/O) EN Electrical Discharge (8kV contact, 15kV air) EN /FCC15 Class A, Conducted Emission (3 Hrs) and Radiated Emission TDK Chamber (4 Hrs) Electromagnetic Compatibility (EMC) **Detailed report available on request. ** MIL-STD-461E Testing per EPRI TR Rev. 3 Test Plan for Important to Power CE101 Low Frequency Conducted Emissions (DC: 30Hz 10kHz, AC: 120Hz 10kHz) RE101 Low Frequency Radiated Emissions (30Hz 100kHz) 9 TR-LCD2300W User Manual

10 IEC Certificate 10 TR-LCD2300W User Manual

11 IEC /EN /CISPR 11/EN Certificate 11 TR-LCD2300W User Manual

12 FCC Class A Certificate 12 TR-LCD2300W User Manual

13 MIL-STD-461E Certificate 13 TR-LCD2300W User Manual

14 Environmental 14 TR-LCD2300W User Manual

15 Seismic Compliant as per IEEE IEEE Recommended Practices for Seismic Qualification of Class 1E Equipment for Nuclear Generating Stations. Detailed report and video of the seismic test are available on request. Seismic Certificate 15 TR-LCD2300W User Manual

16 Important Information The information in this document is subject to change without notice. All relevant issues have been considered in the preparation of this document. Should you notice an omission or any questionable item in this document, please feel free to notify Transduction. Regardless of the foregoing statement, Transduction assumes no responsibility for any errors that may appear in this document or for results obtained by the user as a result of using this product. Copyright 2015 Transduction. All rights reserved. This document is protected by copyright. No part of this document may be reproduced, copied, or translated in any form or means without prior written permission from Transduction. Return Policy Products returned for repair must be accompanied by a Return Material Authorization (RMA) number, obtained from Transduction prior to return. Freight on all returned items must be prepaid by the customer. The customer is responsible for any loss or damage caused by the carrier in transit. To obtain a RMA number, call us at We will need the following information: Return company address and contact Model name, model number and serial number Description of the failure Mark the RMA number clearly on the outside of each box, include a failure report and return the product to: Transduction Inc. RMA# XXXXX Spectrum Way Mississauga, ON Canada L4W 5A1 Tel: TR-LCD2300W User Manual

17 Safety Precautions Do not connect video cable when power is ON. When not used for extended periods of time, set your computer/monitor to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause and electric shock or fire. Do not pull the plug out by the wire or touch the plug with wet hands. This may cause and electric shock or fire. Use only a properly grounded plug or receptacle. An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire or place heavy objects on them. This could cause damage, electric shock or fire. Do not place the monitor face down. The CDT surface may be damaged. When cleaning, wipe with slightly moistened soft cloth. Do not spray any cleaner directly on the monitor. Do not remove housing. No serviceable parts inside. Refer servicing to Transduction. 17 TR-LCD2300W User Manual

18 Contents Your new TR-LCD2300W monitor box should contain the following: 1. TR-LCD2300W monitor with AC/DC power supply 2. AC power cord, 6 feet 3. SVGA cable, 6 feet 4. DVI cable, 10 feet 5. User manual and driver installation CD **Remember to save your original box and packaging material to transport or ship monitor. ** 6FT Power Cord 6FT SVGA Cable 10FT DVI-I Cable Optional VESA Bracket AC/DC Power Supply TR-LCD2300W Monitor P/N: MIW99-12-FT-R TR-LCD2300W User Manual

19 Quick Start **Warning: Never attach monitor to computer with the power ON as it might damage video port. To attach the TR-LCD2300W monitor to your computer, follow the instructions below: 1. Turn OFF the power to your computer. 2. Plug the power cord for the monitor into nearby outlet. 3. Option 1: Connect the DVI cable to the DVI port on the back of the monitor. 4. Option 2: Connect the SVGA cable to the SVGA port on the back of the monitor. 5. Connect the other end of the cable to either DVI or SVGA port (as applicable) on the computer. 6. Turn ON the computer and monitor. If the monitor displays an image, installation is complete. Notes: If the monitor is connected properly but you get a blank or fuzzy screen, check to see if monitor status is set to analog. Press the ENTER button to have the monitor verify the input signal source. 19 TR-LCD2300W User Manual

20 OSD Setup Button Functions Button Name and Function Button MENU Description Activates the OSD menu or goes to previous menu ENTER - When the OSD menu is OFF, press and hold for 5 seconds to perform Auto-Configuration function RIGHT LEFT ON/OFF - When the OSD menu is ON, selects highlighted icon that user wants Increases the adjustment of the selected function Decreases the adjustment of the selected function Turns ON/OFF the monitor 20 TR-LCD2300W User Manual

21 OSD Setup General Description The monitor features an on-chip OSD (On-Screen Display) controller that creates the OSD user interface menus and overlays them onto the output data stream. User can adjust the display conditions on LCD monitor using the touch pad. After powering on, the controller restores itself to the last known conditions saved in Non-Volatile Random Access Memory (NVRAM). All parameters (Settings) are saved whenever user selects icon in OSD. Not making a selection within a defined time period causes the OSD menu to close. The LEFT (S4) and RIGHT (S3) keypad push buttons are used to scroll through items within the main menu. The selected item is highlighted. The MENU key (S1) is used to open and close the OSD menu. The MENU key (S2) is defined as CONFIRM or Enable key to activate the highlighted item. Power Save button (S5) enables user to place the system in a low power mode. From the low power mode, pushing S5 button wakes up the microcontroller to perform a LCD power-up sequence. Main Menu Press S1 of OSD board to start Main Menu. There are five major icons in the Main menu: Image, Display, PIP, Sound, and System. Use S3 or S4 to select target icon and press S2 to start adjustment. For example, when Image icon is highlighted, press S2 and then use S4 or S3 to select the sub-item. If sub-item Brightness is selected, press S2 and then S3 or S4 to adjust the brightness level. If setting is finished, press S1 back to Brightness sub-item and press S1 again back to Image menu. New OSD parameters are saved in NVRAM after pressing S1. 21 TR-LCD2300W User Manual

22 Image 22 TR-LCD2300W User Manual

23 Display 23 TR-LCD2300W User Manual

24 PIP 24 TR-LCD2300W User Manual

25 25 TR-LCD2300W User Manual

26 Resolutions Supported 26 TR-LCD2300W User Manual

27 Mechanical Drawings This page is left blank 27 TR-LCD2300W User Manual

28

29

30

31

32

33

34