4. ATX output V output 6. S: No 12V 4-pin connector V: With 12 4-pin connector

Transcription

1 D esktop PC PCSA3P Series Silent Computer with Great Achievements Desktop PC Nonbackup power supply PCSA3PX2S ATX Continuous Max. RoHS Directive Peak 2W 3W Model PCSA3PX2S PCSA3PX2V Model Name Coding PCSA 3 P X Description No 12V 4pin connector With 12V 4pin connector 1. Series name 2. Output power 3. Peak output compliant 4. ATX output V output 6. S: No 12V 4pin connector V: With 12 4pin connector Stock Standard stock Standard stock Features By building in the thermalsensing variable speed fan, noise reduction can be realized. Heatrelated issue for CPU can be settled with fan changeover switch. This unit endures 2kV lightning surge Over 3, of this model of ATX power supplies have been sold as of 13; it has gained the trust from the customers and yet continues to develop. Refer to Product Page Guideline on p.13 Safety standard / Approval UL CSA EN CE CCC Reliability Grade HFA FA HOA OA Function DC start RS 232C Input AC input Output Output voltage Max. current / max. power (continuous) Peak current / peak power (5 sec max.) Min. current USB TTL PFC 5VSB Silence FAN TSFC FAN V (worldwide range) +3.3V 15A 25A Total 25A / 125W 1A Total 258.5W A 25A [3A] 12A [Total 3A] [15A] Total 2W Total 296W A 2A [A] A Conne ction RoHS Refer to [ ] only for PCSA3PX2V 5V 12V A 1.2A [1.5A] A Dimensions W H D (mm) (PS / 2 size) Output connector PCSA3PX2S +4pin 24pin pin AT AUX 12V 4pin 12V 8pin PCIE 6pin PCIE 6+2pin HDD SATA FDD PCSA3PX2V +4pin 24pin pin AT AUX 12V 4pin 12V 8pin PCIE 6pin PCIE 6+2pin HDD SATA FDD 169 PCSA3P series Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd.

2 General Specification Condition: at normal temperature and humidity unless otherwise specified Refer to [ ] only for PCSA3PX2V Items Specification Measurement conditions, etc. AC Input Output Protection Environment Insulation EMC Others Rated Voltage 2 VAC ( VAC) Worldwide range 253V max. for harmonic current regulation 9V min. if the output power exceeds W Input Frequency 5 / Hz 4763Hz Efficiency 68% typ. [68% min. (73% typ.) ] *Characteristic data: Fig.3 At rated output Factor [9% min.] *Characteristic data: Fig.4 Inrush Current 5A peak *Characteristic data: Fig.5 At 2 VAC input/rated output Reclosing interval: 1 sec min. Input VA At Operation 3VA typ. *Characteristic data: Fig.4 At rated input At Standby 3VA typ. ( VAC) / VA typ. (2 VAC) At PS_ON# signal H(OPEN), rated output Rated Voltage +3.3V +12 5V 12V Rated Current 5A A 1A Max. Current / 15A 25A 1A Max. output power: 258.5W 25A / 125W max. [*Refer to Fig.1] 258.5W Peak Current / A 25A [3A] 12A [15A] 1.2A [1.5A] Peak output power: 294.5W [296W] [3A max.] Time: 5 sec or less 2W max. [*Refer to Fig.1] 294.5W [296W] Min. Current A 2A [A] A A A Total Voltage Accuracy (%) ±5 max. ±5 max. ±5 max. ±6 max. ±6 max. ±5 max. Total accuracy of temperature, input, and load fluctuations Max. Ripple Voltage (mvpp) 5 max. 5 max. 1 max. 5 max. 1 max. 5 max. Max. Spike Voltage (mvpp) max. max. 17 max. max. 17 max. max. Overcurrent Protection Overvoltage Protection OCP Point (A) Method Recovery OVP Point (V) Method Recovery 21 min. 26 min. [31 min.] 13 min. [15.1 min.].53 min. 1.3 min. [1.6 min.] +3.3V,,, 5V, 12V output shutdown Reclosing of input (1 sec min. interval) or switching PS_ON# signal from H to L Foldback current limiting Automatic recovery Blocking oscillation [ ] +3.3V,,, 5V, 12V output shutdown Reclosing of input (1 sec min. interval) or switching PS_ON# signal from H to L Operating Temp. / Humidity to C* / to 9% *Refer to Fig.2 No condensation Storage Temp. / Humidity to 7 C / 1 to 95% No condensation Vibration Displacement amplitude:.15mm (155Hz), Sweep cycles: 1, Test duration: 3 minutes each axis [Displacement amplitude:.75mm (155Hz), Sweep cycles: 1, Test duration: 45 minutes each axis] Mechanical Shock Acceleration of 98m/s 2 for ms one time each in the X, Y and Z directions. No malfunction, damage, lessening or comingoff [Lift one bottom edge up to 5mm and let it fall. Number of bumps: 3 each of 4 edges] Measured on the test board with a capacitor (47μF) connected. The test board shall be separated from the load wires and within 15mm from the output terminal. *Characteristic data: Fig.16 At min. output current, except measured output At max. output current, except measured output with no load of +3.3V All outputs shutdown when is shorted (automatic recovery) At no operation [JISC1999] At no operation [JISC431995] Dielectric Strength AC input DC output/fg: 15 VAC for 1 minute Cutoff current: ma max., At normal temp. / humidity Insulation Resistance AC input DC output/fg, DC output FG: 5MΩ min. At 5 VDC, At normal temp. / humidity Leakage Current.5mA max. ( VAC) / 1mA max. ( VAC) *Characteristic data: Fig.6 YEW. TYPE3226 (1kΩ) or equivalent Line Noise Immunity ± V min. (pulse width: 5ns, repetitive cycle: 3Hz) [± V min. (pulse width: /ns, repetitive cycle: 3Hz, normal/common mode with pos./neg. polarity for 1 minute)] Measured by INS41 No fluctuation of DC output or malfunction Electrostatic Discharge EN42 compliant Radiated, RadioFrequency EM Field EN43 compliant Fast Transient Burst EN44 compliant Lightning Surge EN45 compliant RF Conducted Immunity EN46 compliant Magnetic Field Immunity EN48 compliant Voltage Dip / Regulation EN411 compliant Conducted Emission VCCIA compliant *Characteristic data: Fig.7 and 8 Measured by single unit Harmonic Current Regulation IEC32 compliant At rated input/output Safety Standard UL195, CSA 95 (cul), EN951 Class 1 equipment embedded type power supply Cooling System Forced air cooling: thermalsensing variable speed fan embedded Fan speed changes by temperature and load. Output Grounding Capacitor grounding Output Holdup Time PWR_OK holds up ms min. after AC failure *Characteristic data: Fig.13 At rated output Reliability Grade HOA Follow our standard MTBF, H min. Based on EIAJ RCR912 Weight 1.8 kg typ. Warranty 1 years after delivery. If any faults belong to us, the defective unit shall be repaired or replaced at our cost. Except for errors caused by operation not listed Desktop PC Nonbackup power supply When the input voltage is 9 VAC or less, follow the graph below for the power distribution of the total power of +3.3V and vs. output power. * only PCSA3VX2V output power (W) Fig.1 Output Cross Regulation Max. output power Peak output power Total output power of +3.3V and (W) Fig.2 Temperature Derating When the ambient temperature (near the airflow inlet) exceeds C, follow the derating curve to derate rated current/power, max. current/power, and peak current/power. Load factor (%) Ambient temperature ( C) Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd. 17 PCSA3P series

3 Signal Input / Output Specification Condition: at normal temperature and humidity unless otherwise specified Items Specification Note Desktop PC Nonbackup Input Signal Output Signal Input Signal Circuit Output Signal Circuit Output ON / OFF Control Signal (PS_ON#) +3.3V,,, 5V, and 12V outputs are delivered with 'L' input. +3.3V,,, 5V, and 12V outputs shutdown with 'H' or 'OPEN' input and, protection circuit is activated to reset locked latch circuit at output shutdown status. Signal input between the pin 14 of P1 connector and COM pin +3.3V SENSE The input terminal to detect the voltage of +3.3V output; by connecting to the load terminal, The pin 11 of P1 connector only the line drop of the + side of the output cable is compensated. FAN C Fan motor is rotated at full speed at input voltage of 9V±5% or higher. The pin 2 of P7 connector Speed control inside the power supply comes first when input voltage is lower than that or open. Normal Output Signal (PWR_OK) 'H' signal is delivered when the output is normal. The pin 8 of P1 connector Fan Monitor Signal (FAN M) Two cycle pulses per one rotation of the fan motor are delivered (open collector output). The signal remains 'L' or 'OPEN' when the fan stops caused by any failure or malfunction. The pin 1 of P7 connector (PS_ON#) supply side 6.8k Ω typ. (PWR_OK) 1kΩ typ. 27k Ω typ. Signal input terminal 1mA max. 5.5V max. Signal output terminal Signal Circuit supply side 1kΩ typ. supply side (FAN C) 8Vtyp. (FAN M) Signal input terminal.3ma min. 1mA max. 18V max. One rotation Signal output terminal supply side 5mA max. 5.5V max. 5mA max. 18V max. Internal Structure 171 PCSA3P series Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd.

4 Sequence Diagram AC Input voltage OFF ON (1) (3) PS_ON# signal output voltage output voltage (*2) PWR_OK signal L V V (*1) (2) H (OPEN) 5V 9% 9% 1ms min. 5V 4.75V 1V typ. L 5ms H 5ms min. 5ms max. 4.75V 4.75V 5ms 1ms min. 4.75V 1V typ. 1ms min. (*3) ms min. Desktop PC Nonbackup (*1)Startup time shall be 2sec (max.) (provided that reclosing interval is 1sec min. after input failure). (*2)Other output voltages shall follow this except for the voltage value. The voltage level and at rising shall be at or above the output voltage of +3.3V. (*3)At W output, it shall be 25ms min. (PCSA3PX2V) Undefined (1)With PS_ON# L, all outputs start up at AC input. When start up, PWR_OK goes H after 5ms. (2)With PS_ON# H (OPEN) input, all outputs except for shutdown. (3)At blackout, PWR_OK goes 'L' after at least (*3); 1ms min. after that, and outputs shutdown. Block Diagram Inverter Auxiliary power supply Error amplifier Dropper Dropper 5V 12V FAN M FAN FAN C VAC supply SW AC L AC N FG Noise filter circuit PFC Inverter Chopper * V +3.3V SENSE PWM control circuit OV detection GND Capacitor grounding Error amplifier Remote ON/OFF PS _ ON# (Remote ON / OFF) Voltage comparison PWR _ OK ( Good ) *1: only X2V Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd. PCSA3P series 172

5 Outline Drawing / Output Harness PCSA3PX2S Mounting hole details Desktop PC Nonbackup MAX CURRENT 5.A 5.A 5.A 5.A 5.A 5.A 5.A 5mA 1.2A 5.A 2.A 2.A 5.A 1mA 5.A 5.A 5.A 5.A 5.A 4.A 4.A 4.A 4.A 5mA 1mA 1mA CONNECTOR TYPE Label Content Production # REV. Others mounting hole Label Content Manufacturer's name Model name Input/Output rating Others mounting hole compliant (Matsushita) 12 VDC. cal. (thermalsensing speed control) Dimensional tolerance shall be ±1 unless otherwise specified. Installation direction The unit can be installed in any directions. Bottom surface: mounting screws shall not project. PCSA3PX2V Mounting hole details MAX CURRENT 5.A 5.A 5.A 5.A 5.A 5.A 5.A 5mA 1.5A 5.A 5.A 5.A 5.A 1mA 5.A 5.A 5.A 5.A 5.A 5.A 5.A 5.A 5.A 4.A* 4.A* 4.A* 4.A* 5mA 1mA 1mA CONNECTOR TYPE Label Content Production # REV. Others mounting hole Label Content Manufacturer' name Model name Input/Output rating Others * Total current of P8, P9, and P1 shall be 9A or less. mounting hole compliant (Matsushita) 12 VDC. cal. (thermalsensing speed control) Dimensional tolerance shall be ±1 unless otherwise specified. Installation direction The unit can be installed in any directions. Bottom surface: mounting screws shall not project. 173 PCSA3P series Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd.

6 Optional Components Sold Separately Cable Picture Model Type Description WH2753 AC power cord 125 VAC 12A [PSE] WH27532 AC power cord Other Optional Components Model Description ACC2637 Automatic startup unit WH28 pin extension harness (mm) WH2747 pin extension harness (45mm) WH2892 pin extension harness (mm) WH2812 PCIE 6pin connector conversion harness 125 VAC 12A (tracking resistance type) [PSE] Model WH515 WH5152 WH555 ACC546 ACC577 WH573 Description 12V 4pin connector conversion harness (mm) 12V 4pin connector conversion harness (3mm) AT connector conversion harness Harness with PS_ON switch PS_ON terminal short connector PS_ON terminal short pin harness Desktop PC Nonbackup Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd. PCSA3P series 174

7 Characteristics Data PCSA3PX2S (Examples of actual measurement) Desktop PC Nonbackup Fig.3 Efficiency / Input Current vs. Output Efficiency [%] Efficiency Output power [W] Fig.5 Inrush Current VAC 2 VAC Input current 5 4 Input current [A] Inrush current: 12.4A (at VAC) Fig.4 Factor / Input VA vs. Output factor [%] Fig.6 Leakage Current Input: / 2 VAC and min. load VAC 2 VAC Output power [W] Rated load factor Input VA Min. load VAC.24mA.21mA 2 VAC.53mA.45mA Input VA [VA] Inrush current: 29.2A (at 2 VAC) Fig.7 Conducted Emission at VAC Input: VAC Mode: Peak Fig.8 Conducted Emission at 2 VAC Input: 2 VAC Mode: Peak VCCI Class A VCCI Class A Fig.9 Rising Characteristics at VAC Fig.1 Falling Characteristics at VAC when REMOTE goes Off Input: VAC Time axis: 2ms/DIV Input: VAC Time axis: 1ms/DIV VAC +3.3V PS_ON# PWR_OK 175 PCSA3P series Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd.

8 Characteristics Data PCSA3PX2S (Examples of actual measurement) Fig.11 Rising Characteristics at 2 VAC Fig.13 Output Holdup Time vs. Output Holdup time [ms] Input: 2 VAC Time axis: 2ms/DIV PWR_OK: the point that PWR_OK signal goes to L Output voltage: the point any output voltage decreases to 95% except PWR_OK Output voltage Output power [W] Fig.12 Falling Characteristics at 2 VAC when REMOTE goes Off 2 VAC +3.3V PS_ON# PWR_OK Input: 2 VAC Time axis: 1ms/DIV Fig.14 Dynamic Load Fluctuation Characteristics at 1kHz Input: VAC Time axis: μs/div output voltage (5mV/DIV) output voltage (mv/div) +3.3V output voltage (mv/div) output current (1A/DIV) Desktop PC Nonbackup Fig.15 Output Voltage Regulation Output Min. load Rated load Peak load output 1A 12A output 2A A 25A +3.3V output A 5A A Fig.16 Ripple and Spike Voltage Input: VAC Time axis: 2μs/DIV AC input voltage output (min. load) 85 VAC VAC 132 VAC 176 VAC 2 VAC 264 VAC V V V V V V output (rated load) V 12.1 V 12.7 V 12.6 V 12.3 V 12.5 V output (peak load) V V V V V V output (min. load) V V V V V V output (rated load) 5.76 V 5.77 V 5.77 V 5.77 V 5.77 V 5.77 V output (peak load) 5.23 V 5.24 V 5.24 V 5.25 V 5.25 V 5.25 V +3.3V output (min. load) V V V V V V +3.3V output (rated load) V V V V V V +3.3V output (peak load) V V V V V V output voltage (1mV/DIV) output voltage (1mV/DIV) +3.3V output voltage (1mV/DIV) Fig.17 Ambient Temperature vs. Expected Service Life Fig.18 Over Current Protection (VI Characteristic) Electrolytic capacitors Intake air temp. C 3 C C Expected service life (yr) approx. 47 approx. 23 approx. 12 Ambient temp. C 5 C C Expected service life (yr) approx. 7.4 approx. 6.4 approx. 4.6 Input: VAC Operating time: 24 consecutive hours Lifetime shall be 15 years at longest due to deterioration of sealing plates. Fan Output voltage [V] Input: VAC +3.3V Output current [A] Specification, design, and prices in the catalog are subject to change without prior notice. Do not copy. Copyright 13 Nipron Co., Ltd. PCSA3P series 176